aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq40xx')
-rw-r--r--target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata18
-rw-r--r--target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh14
2 files changed, 16 insertions, 16 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 42cb295496..87876ad844 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -12,7 +12,7 @@ case "$FIRMWARE" in
meraki,mr33)
caldata_extract_ubi "ART" 0x9000 0x844
caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
- ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
+ ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
;;
esac
;;
@@ -128,7 +128,7 @@ case "$FIRMWARE" in
;;
engenius,ens620ext)
caldata_extract "ART" 0x1000 0x2f20
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
;;
linksys,ea8300 |\
linksys,mr8300)
@@ -138,7 +138,7 @@ case "$FIRMWARE" in
meraki,mr33)
caldata_extract_ubi "ART" 0x1000 0x2f20
caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
- ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
+ ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
;;
mikrotik,hap-ac2)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
@@ -180,7 +180,7 @@ case "$FIRMWARE" in
aruba,ap-303h |\
aruba,ap-365)
caldata_extract "ART" 0x5000 0x2f20
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) 1)
;;
asus,map-ac2200)
caldata_extract_ubi "Factory" 0x5000 0x2f20
@@ -233,15 +233,15 @@ case "$FIRMWARE" in
;;
engenius,emd1)
caldata_extract "0:ART" 0x5000 0x2f20
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
;;
engenius,emr3500)
caldata_extract "0:ART" 0x5000 0x2f20
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
;;
engenius,ens620ext)
caldata_extract "ART" 0x5000 0x2f20
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
;;
linksys,ea8300 |\
linksys,mr8300)
@@ -251,7 +251,7 @@ case "$FIRMWARE" in
meraki,mr33)
caldata_extract_ubi "ART" 0x5000 0x2f20
caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
- ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
+ ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
;;
mikrotik,hap-ac2|\
mikrotik,sxtsq-5-ac)
@@ -266,7 +266,7 @@ case "$FIRMWARE" in
;;
netgear,wac510)
caldata_extract "0:ART" 0x5000 0x2f20
- ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) +16)
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
index 0d606c75b5..51ba7071e7 100644
--- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
+++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
@@ -4,8 +4,8 @@ preinit_set_mac_address() {
case $(board_name) in
asus,map-ac2200)
base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
- ip link set dev eth0 address $(macaddr_add "$base_mac" +1)
- ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
+ ip link set dev eth0 address $(macaddr_add "$base_mac" 1)
+ ip link set dev eth1 address $(macaddr_add "$base_mac" 3)
;;
ezviz,cs-w3-wd1200g-eup)
ip link set dev eth0 address $(mtd_get_mac_binary "ART" 0x6)
@@ -13,13 +13,13 @@ preinit_set_mac_address() {
;;
engenius,eap2200)
base_mac=$(cat /sys/class/net/eth0/address)
- ip link set dev eth1 address $(macaddr_add "${base_mac}" +1)
+ ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
;;
linksys,ea8300|\
linksys,mr8300)
base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
- ip link set dev eth0 address "${base_mac}"
- ip link set dev eth1 address $(macaddr_add "${base_mac}" 1)
+ ip link set dev eth0 address "$base_mac"
+ ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
;;
meraki,mr33)
mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
@@ -27,8 +27,8 @@ preinit_set_mac_address() {
;;
zyxel,nbg6617)
base_mac=$(cat /sys/class/net/eth0/address)
- ip link set dev eth0 address $(macaddr_add "$base_mac" +2)
- ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
+ ip link set dev eth0 address $(macaddr_add "$base_mac" 2)
+ ip link set dev eth1 address $(macaddr_add "$base_mac" 3)
esac
}