aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch')
-rw-r--r--target/linux/ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch285
1 files changed, 0 insertions, 285 deletions
diff --git a/target/linux/ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch b/target/linux/ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch
deleted file mode 100644
index 5f422c1dde..0000000000
--- a/target/linux/ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch
+++ /dev/null
@@ -1,285 +0,0 @@
-From 5c7d1181056feef0b58fb2f556f55e170ba5b479 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sat, 25 Jul 2020 19:14:59 +0200
-Subject: [PATCH 01/10] drivers: thermal: tsens: Add VER_0 tsens version
-
-VER_0 is used to describe device based on tsens version before v0.1.
-These device are devices based on msm8960 for example apq8064 or
-ipq806x.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
-Reported-by: kernel test robot <lkp@intel.com>
-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
----
- drivers/thermal/qcom/tsens.c | 150 ++++++++++++++++++++++++++++-------
- drivers/thermal/qcom/tsens.h | 4 +-
- 2 files changed, 124 insertions(+), 30 deletions(-)
-
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -12,6 +12,7 @@
- #include <linux/of.h>
- #include <linux/of_address.h>
- #include <linux/of_platform.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/platform_device.h>
- #include <linux/pm.h>
- #include <linux/regmap.h>
-@@ -515,6 +516,15 @@ static irqreturn_t tsens_irq_thread(int
- dev_dbg(priv->dev, "[%u] %s: no violation: %d\n",
- hw_id, __func__, temp);
- }
-+
-+ if (tsens_version(priv) < VER_0_1) {
-+ /* Constraint: There is only 1 interrupt control register for all
-+ * 11 temperature sensor. So monitoring more than 1 sensor based
-+ * on interrupts will yield inconsistent result. To overcome this
-+ * issue we will monitor only sensor 0 which is the master sensor.
-+ */
-+ break;
-+ }
- }
-
- return IRQ_HANDLED;
-@@ -530,6 +540,13 @@ static int tsens_set_trips(void *_sensor
- int high_val, low_val, cl_high, cl_low;
- u32 hw_id = s->hw_id;
-
-+ if (tsens_version(priv) < VER_0_1) {
-+ /* Pre v0.1 IP had a single register for each type of interrupt
-+ * and thresholds
-+ */
-+ hw_id = 0;
-+ }
-+
- dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
- hw_id, __func__, low, high);
-
-@@ -584,18 +601,21 @@ int get_temp_tsens_valid(const struct ts
- u32 valid;
- int ret;
-
-- ret = regmap_field_read(priv->rf[valid_idx], &valid);
-- if (ret)
-- return ret;
-- while (!valid) {
-- /* Valid bit is 0 for 6 AHB clock cycles.
-- * At 19.2MHz, 1 AHB clock is ~60ns.
-- * We should enter this loop very, very rarely.
-- */
-- ndelay(400);
-+ /* VER_0 doesn't have VALID bit */
-+ if (tsens_version(priv) >= VER_0_1) {
- ret = regmap_field_read(priv->rf[valid_idx], &valid);
- if (ret)
- return ret;
-+ while (!valid) {
-+ /* Valid bit is 0 for 6 AHB clock cycles.
-+ * At 19.2MHz, 1 AHB clock is ~60ns.
-+ * We should enter this loop very, very rarely.
-+ */
-+ ndelay(400);
-+ ret = regmap_field_read(priv->rf[valid_idx], &valid);
-+ if (ret)
-+ return ret;
-+ }
- }
-
- /* Valid bit is set, OK to read the temperature */
-@@ -608,15 +628,29 @@ int get_temp_common(const struct tsens_s
- {
- struct tsens_priv *priv = s->priv;
- int hw_id = s->hw_id;
-- int last_temp = 0, ret;
-+ int last_temp = 0, ret, trdy;
-+ unsigned long timeout;
-
-- ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
-- if (ret)
-- return ret;
-+ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
-+ do {
-+ if (tsens_version(priv) == VER_0) {
-+ ret = regmap_field_read(priv->rf[TRDY], &trdy);
-+ if (ret)
-+ return ret;
-+ if (!trdy)
-+ continue;
-+ }
-
-- *temp = code_to_degc(last_temp, s) * 1000;
-+ ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp);
-+ if (ret)
-+ return ret;
-
-- return 0;
-+ *temp = code_to_degc(last_temp, s) * 1000;
-+
-+ return 0;
-+ } while (time_before(jiffies, timeout));
-+
-+ return -ETIMEDOUT;
- }
-
- #ifdef CONFIG_DEBUG_FS
-@@ -738,19 +772,34 @@ int __init init_common(struct tsens_priv
- priv->tm_offset = 0x1000;
- }
-
-- res = platform_get_resource(op, IORESOURCE_MEM, 0);
-- tm_base = devm_ioremap_resource(dev, res);
-- if (IS_ERR(tm_base)) {
-- ret = PTR_ERR(tm_base);
-- goto err_put_device;
-+ if (tsens_version(priv) >= VER_0_1) {
-+ res = platform_get_resource(op, IORESOURCE_MEM, 0);
-+ tm_base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(tm_base)) {
-+ ret = PTR_ERR(tm_base);
-+ goto err_put_device;
-+ }
-+
-+ priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
-+ } else { /* VER_0 share the same gcc regs using a syscon */
-+ struct device *parent = priv->dev->parent;
-+
-+ if (parent)
-+ priv->tm_map = syscon_node_to_regmap(parent->of_node);
- }
-
-- priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config);
-- if (IS_ERR(priv->tm_map)) {
-- ret = PTR_ERR(priv->tm_map);
-+ if (IS_ERR_OR_NULL(priv->tm_map)) {
-+ if (!priv->tm_map)
-+ ret = -ENODEV;
-+ else
-+ ret = PTR_ERR(priv->tm_map);
- goto err_put_device;
- }
-
-+ /* VER_0 have only tm_map */
-+ if (!priv->srot_map)
-+ priv->srot_map = priv->tm_map;
-+
- if (tsens_version(priv) > VER_0_1) {
- for (i = VER_MAJOR; i <= VER_STEP; i++) {
- priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map,
-@@ -771,6 +820,10 @@ int __init init_common(struct tsens_priv
- ret = PTR_ERR(priv->rf[TSENS_EN]);
- goto err_put_device;
- }
-+ /* in VER_0 TSENS need to be explicitly enabled */
-+ if (tsens_version(priv) == VER_0)
-+ regmap_field_write(priv->rf[TSENS_EN], 1);
-+
- ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
- if (ret)
- goto err_put_device;
-@@ -793,6 +846,19 @@ int __init init_common(struct tsens_priv
- goto err_put_device;
- }
-
-+ priv->rf[TSENS_SW_RST] =
-+ devm_regmap_field_alloc(dev, priv->srot_map, priv->fields[TSENS_SW_RST]);
-+ if (IS_ERR(priv->rf[TSENS_SW_RST])) {
-+ ret = PTR_ERR(priv->rf[TSENS_SW_RST]);
-+ goto err_put_device;
-+ }
-+
-+ priv->rf[TRDY] = devm_regmap_field_alloc(dev, priv->tm_map, priv->fields[TRDY]);
-+ if (IS_ERR(priv->rf[TRDY])) {
-+ ret = PTR_ERR(priv->rf[TRDY]);
-+ goto err_put_device;
-+ }
-+
- /* This loop might need changes if enum regfield_ids is reordered */
- for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) {
- for (i = 0; i < priv->feat->max_sensors; i++) {
-@@ -808,7 +874,7 @@ int __init init_common(struct tsens_priv
- }
- }
-
-- if (priv->feat->crit_int) {
-+ if (priv->feat->crit_int || tsens_version(priv) < VER_0_1) {
- /* Loop might need changes if enum regfield_ids is reordered */
- for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) {
- for (i = 0; i < priv->feat->max_sensors; i++) {
-@@ -846,7 +912,11 @@ int __init init_common(struct tsens_priv
- }
-
- spin_lock_init(&priv->ul_lock);
-- tsens_enable_irq(priv);
-+
-+ /* VER_0 interrupt doesn't need to be enabled */
-+ if (tsens_version(priv) >= VER_0_1)
-+ tsens_enable_irq(priv);
-+
- tsens_debug_init(op);
-
- err_put_device:
-@@ -951,10 +1021,19 @@ static int tsens_register_irq(struct tse
- if (irq == -ENXIO)
- ret = 0;
- } else {
-- ret = devm_request_threaded_irq(&pdev->dev, irq,
-- NULL, thread_fn,
-- IRQF_ONESHOT,
-- dev_name(&pdev->dev), priv);
-+ /* VER_0 interrupt is TRIGGER_RISING, VER_0_1 and up is ONESHOT */
-+ if (tsens_version(priv) == VER_0)
-+ ret = devm_request_threaded_irq(&pdev->dev, irq,
-+ thread_fn, NULL,
-+ IRQF_TRIGGER_RISING,
-+ dev_name(&pdev->dev),
-+ priv);
-+ else
-+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-+ thread_fn, IRQF_ONESHOT,
-+ dev_name(&pdev->dev),
-+ priv);
-+
- if (ret)
- dev_err(&pdev->dev, "%s: failed to get irq\n",
- __func__);
-@@ -983,6 +1062,19 @@ static int tsens_register(struct tsens_p
- priv->ops->enable(priv, i);
- }
-
-+ /* VER_0 require to set MIN and MAX THRESH
-+ * These 2 regs are set using the:
-+ * - CRIT_THRESH_0 for MAX THRESH hardcoded to 120°C
-+ * - CRIT_THRESH_1 for MIN THRESH hardcoded to 0°C
-+ */
-+ if (tsens_version(priv) < VER_0_1) {
-+ regmap_field_write(priv->rf[CRIT_THRESH_0],
-+ tsens_mC_to_hw(priv->sensor, 120000));
-+
-+ regmap_field_write(priv->rf[CRIT_THRESH_1],
-+ tsens_mC_to_hw(priv->sensor, 0));
-+ }
-+
- ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
- if (ret < 0)
- return ret;
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -13,6 +13,7 @@
- #define CAL_DEGC_PT2 120
- #define SLOPE_FACTOR 1000
- #define SLOPE_DEFAULT 3200
-+#define TIMEOUT_US 100
- #define THRESHOLD_MAX_ADC_CODE 0x3ff
- #define THRESHOLD_MIN_ADC_CODE 0x0
-
-@@ -25,7 +26,8 @@ struct tsens_priv;
-
- /* IP version numbers in ascending order */
- enum tsens_ver {
-- VER_0_1 = 0,
-+ VER_0 = 0,
-+ VER_0_1,
- VER_1_X,
- VER_2_X,
- };
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-19 16:00:25 +0000