diff options
Diffstat (limited to 'target/linux/ipq806x/patches-5.4')
3 files changed, 10 insertions, 30 deletions
diff --git a/target/linux/ipq806x/patches-5.4/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch b/target/linux/ipq806x/patches-5.4/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch index eb9978154d..cfc4341ebc 100644 --- a/target/linux/ipq806x/patches-5.4/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch +++ b/target/linux/ipq806x/patches-5.4/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch @@ -29,7 +29,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm -@@ -150,6 +150,18 @@ config ARM_QCOM_CPUFREQ_HW +@@ -155,6 +155,18 @@ config ARM_QCOM_CPUFREQ_HW The driver implements the cpufreq interface for this HW engine. Say Y if you want to support CPUFreq HW. @@ -48,7 +48,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> config ARM_RASPBERRYPI_CPUFREQ tristate "Raspberry Pi cpufreq support" depends on CLK_RASPBERRYPI || COMPILE_TEST -@@ -339,4 +351,4 @@ config ARM_PXA2xx_CPUFREQ +@@ -338,4 +350,4 @@ config ARM_PXA2xx_CPUFREQ help This add the CPUFreq driver support for Intel PXA2xx SOCs. @@ -57,7 +57,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> \ No newline at end of file --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile -@@ -63,6 +63,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2 +@@ -65,6 +65,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2 obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_NVMEM) += qcom-cpufreq-nvmem.o @@ -65,8 +65,8 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o -@@ -86,6 +87,7 @@ obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += te - obj-$(CONFIG_ARM_TEGRA194_CPUFREQ) += tegra194-cpufreq.o +@@ -87,6 +88,7 @@ obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += te + obj-$(CONFIG_ARM_TEGRA186_CPUFREQ) += tegra186-cpufreq.o obj-$(CONFIG_ARM_TI_CPUFREQ) += ti-cpufreq.o obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o +obj-$(CONFIG_ARM_KRAIT_CPUFREQ) += krait-cpufreq.o diff --git a/target/linux/ipq806x/patches-5.4/100-v5.11-dmaengine-qcom-add_ADM_driver.patch b/target/linux/ipq806x/patches-5.4/100-v5.11-dmaengine-qcom-add_ADM_driver.patch index 45062d52fc..2d24da01e4 100644 --- a/target/linux/ipq806x/patches-5.4/100-v5.11-dmaengine-qcom-add_ADM_driver.patch +++ b/target/linux/ipq806x/patches-5.4/100-v5.11-dmaengine-qcom-add_ADM_driver.patch @@ -31,8 +31,6 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org> 3 files changed, 915 insertions(+) create mode 100644 drivers/dma/qcom/qcom_adm.c -diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig -index 3bcb689162c67..0389d60d2604a 100644 --- a/drivers/dma/qcom/Kconfig +++ b/drivers/dma/qcom/Kconfig @@ -1,4 +1,15 @@ @@ -51,8 +49,6 @@ index 3bcb689162c67..0389d60d2604a 100644 config QCOM_BAM_DMA tristate "QCOM BAM DMA support" depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM) -diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile -index 1ae92da88b0c9..346e643fbb6db 100644 --- a/drivers/dma/qcom/Makefile +++ b/drivers/dma/qcom/Makefile @@ -1,4 +1,5 @@ @@ -61,9 +57,6 @@ index 1ae92da88b0c9..346e643fbb6db 100644 obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mgmt.o hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o -diff --git a/drivers/dma/qcom/qcom_adm.c b/drivers/dma/qcom/qcom_adm.c -new file mode 100644 -index 0000000000000..9b6f8e050ecce --- /dev/null +++ b/drivers/dma/qcom/qcom_adm.c @@ -0,0 +1,903 @@ @@ -970,6 +963,3 @@ index 0000000000000..9b6f8e050ecce +MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>"); +MODULE_DESCRIPTION("QCOM ADM DMA engine driver"); +MODULE_LICENSE("GPL v2"); --- -cgit 1.2.3-1.el7 - diff --git a/target/linux/ipq806x/patches-5.4/101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch b/target/linux/ipq806x/patches-5.4/101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch index 7aec4fcc83..a78dc82a47 100644 --- a/target/linux/ipq806x/patches-5.4/101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch +++ b/target/linux/ipq806x/patches-5.4/101-5.12-mtd-parsers-Add-Qcom-SMEM-parser.patch @@ -17,15 +17,12 @@ Link: https://lore.kernel.org/linux-mtd/20210104041137.113075-3-manivannan.sadha 3 files changed, 179 insertions(+) create mode 100644 drivers/mtd/parsers/qcomsmempart.c -diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig -index e72354322f628..d90c302290522 100644 --- a/drivers/mtd/parsers/Kconfig +++ b/drivers/mtd/parsers/Kconfig -@@ -160,6 +160,14 @@ config MTD_REDBOOT_PARTS_READONLY - 'FIS directory' images, enable this option. +@@ -196,6 +196,14 @@ config MTD_REDBOOT_PARTS_READONLY endif # MTD_REDBOOT_PARTS -+ + +config MTD_QCOMSMEM_PARTS + tristate "Qualcomm SMEM NAND flash partition parser" + depends on MTD_NAND_QCOM || COMPILE_TEST @@ -33,22 +30,18 @@ index e72354322f628..d90c302290522 100644 + help + This provides support for parsing partitions from Shared Memory (SMEM) + for NAND flash on Qualcomm platforms. - ++ config MTD_ROUTERBOOT_PARTS tristate "RouterBoot flash partition parser" -diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile -index b0c5f62f9e858..50eb0b0a22105 100644 + depends on MTD && OF --- a/drivers/mtd/parsers/Makefile +++ b/drivers/mtd/parsers/Makefile -@@ -9,4 +9,5 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o +@@ -13,4 +13,5 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o +obj-$(CONFIG_MTD_QCOMSMEM_PARTS) += qcomsmempart.o obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o -diff --git a/drivers/mtd/parsers/qcomsmempart.c b/drivers/mtd/parsers/qcomsmempart.c -new file mode 100644 -index 0000000000000..808cb33d71f8e --- /dev/null +++ b/drivers/mtd/parsers/qcomsmempart.c @@ -0,0 +1,170 @@ @@ -222,6 +215,3 @@ index 0000000000000..808cb33d71f8e +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); +MODULE_DESCRIPTION("Qualcomm SMEM NAND flash partition parser"); --- -cgit 1.2.3-1.el7 - |