aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq/base-files/etc
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/lantiq/base-files/etc')
-rw-r--r--target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata28
-rw-r--r--target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom36
2 files changed, 9 insertions, 55 deletions
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 6d7682a7f3..5b03fb0e01 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -3,29 +3,7 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
-. /lib/upgrade/nand.sh
-
-ath10k_caldata_die() {
- echo "ath10k caldata: " "$*"
- exit 1
-}
-
-ath10k_caldata_extract_ubi() {
- local part=$1
- local offset=$2
- local count=$3
- local ubidev=$(nand_find_ubi $CI_UBIPART)
- local ubi
-
- ubi=$(nand_find_volume $ubidev $part)
- [ -n "$ubi" ] || \
- ath10k_caldata_die "no UBI volume found for $part"
-
- dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
- ath10k_caldata_die "failed to extract from $ubi"
-}
+. /lib/functions/caldata.sh
ath10k_caldata_set_macaddr() {
local macaddr=$1
@@ -39,11 +17,11 @@ case "$FIRMWARE" in
board=$(board_name)
case $board in
bt,homehub-v5a)
- ath10k_caldata_extract_ubi "caldata" 20480 2116
+ caldata_extract_ubi "caldata" 0x5000 0x844
ath10k_caldata_set_macaddr $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +3)
;;
*)
- ath10k_caldata_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index 2c4a5a1799..20160cb32b 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -3,15 +3,9 @@
[ -e /lib/firmware/$FIRMWARE ] && exit 0
-. /lib/functions.sh
-. /lib/functions/system.sh
+. /lib/functions/caldata.sh
. /lib/upgrade/nand.sh
-ath9k_eeprom_die() {
- echo "ath9k eeprom: $*"
- exit 1
-}
-
ath9k_eeprom_extract_raw() {
local source=$1
local offset=$(($2))
@@ -28,25 +22,7 @@ ath9k_eeprom_extract_raw() {
fi
dd if=$source of=/lib/firmware/$FIRMWARE bs=$bs skip=$offset count=$size $conv 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_eeprom_extract_reverse() {
- local part=$1
- local offset=$2
- local count=$(($3))
- local mtd
- local reversed
- local caldata
-
- mtd=$(find_mtd_chardev "$part")
- reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-
- for byte in $reversed; do
- caldata="\x${byte}${caldata}"
- done
-
- printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
+ caldata_die "failed to extract from $mtd"
}
ath9k_eeprom_extract() {
@@ -57,7 +33,7 @@ ath9k_eeprom_extract() {
mtd=$(find_mtd_chardev $part)
[ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
+ caldata_die "no mtd device found for partition $part"
ath9k_eeprom_extract_raw $mtd $offset $swap
}
@@ -71,7 +47,7 @@ ath9k_ubi_eeprom_extract() {
ubi=$(nand_find_volume $ubidev $part)
[ -n "$ubi" ] || \
- ath9k_eeprom_die "no UBI volume found for $part"
+ caldata_die "no UBI volume found for $part"
ath9k_eeprom_extract_raw /dev/$ubi $offset $swap
}
@@ -143,7 +119,7 @@ case "$FIRMWARE" in
avm,fritz3370-rev2-hynix|\
avm,fritz3370-rev2-micron|\
avm,fritz7362sl)
- ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
+ caldata_extract_reverse "urlader" 0x1541 0x440
;;
avm,fritz7312|avm,fritz7320|avm,fritz7360sl)
ath9k_eeprom_extract "urlader" 0x985 0
@@ -155,7 +131,7 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "boardconfig" 0x21000 0
;;
*)
- ath9k_eeprom_die "board $board is not supported yet"
+ caldata_die "board $board is not supported yet"
;;
esac
;;