diff options
Diffstat (limited to 'target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts')
| -rw-r--r-- | target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts | 218 |
1 files changed, 0 insertions, 218 deletions
diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts deleted file mode 100644 index 8fb5fdb2f6..0000000000 --- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts +++ /dev/null @@ -1,218 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include "vr9.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/mips/lantiq_rcu_gphy.h> - -/ { - compatible = "avm,fritz7412", "lantiq,xway", "lantiq,vr9"; - model = "AVM FRITZ!Box 7412"; - - chosen { - bootargs = "console=ttyLTQ0,115200"; - }; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_red; - - led-dsl = &info; - led-wifi = &wifi; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x8000000>; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wps { - label = "wps"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - }; - - dect { - label = "dect"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_PHONE>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_green: power_green { - label = "green:power"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - power_red: power_red { - label = "red:power"; - gpios = <&gpio 5 GPIO_ACTIVE_LOW>; - }; - - fon { - label = "green:fon"; - gpios = <&gpio 34 GPIO_ACTIVE_LOW>; - }; - - dect { - label = "green:dect"; - gpios = <&gpio 15 GPIO_ACTIVE_LOW>; - }; - - wifi: wifi { - label = "green:wifi"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - }; - - info: info { - label = "green:info"; - gpios = <&gpio 35 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&localbus { - flash@0 { - compatible = "lantiq,nand-xway"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - lantiq,cs = <1>; - - pinctrl-0 = <&nand_pins>, <&nand_cs1_pins>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "urlader"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "nand-tffs"; - reg = <0x40000 0x400000>; - read-only; - }; - - partition@440000 { - label = "kernel"; - reg = <0x440000 0x400000>; - }; - - partition@840000 { - label = "ubi"; - reg = <0x840000 0x3000000>; - }; - - partition@3840000 { - label = "reserved-kernel"; - reg = <0x3840000 0x400000>; - read-only; - }; - - partition@3c40000 { - label = "reserved-filesystem"; - reg = <0x3c40000 0x3000000>; - read-only; - }; - - partition@6c40000 { - label = "config"; - reg = <0x6c40000 0x400000>; - read-only; - }; - - partition@6e40000 { - label = "nand-filesystem"; - reg = <0x6e40000 0x400000>; - read-only; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - gpio-reset = <&gpio 11 GPIO_ACTIVE_HIGH>; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - - wifi@168c,002e { - compatible = "pci168c,002e"; - reg = <0 0 0 0 0>; - qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ - }; - }; -}; - -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - pcie-rst { - lantiq,pins = "io11"; - lantiq,open-drain = <1>; - lantiq,output = <1>; - }; - }; -}; - -&gphy0 { - lantiq,gphy-mode = <GPHY_MODE_FE>; -}; - -ð0 { - lantiq,phys = <&gphy0>; - - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; - lantiq,switch; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - -&vmmc { - status = "okay"; -}; |