aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/lantiq')
-rw-r--r--target/linux/lantiq/Makefile1
-rw-r--r--target/linux/lantiq/ase/config-5.46
-rw-r--r--target/linux/lantiq/config-5.439
-rw-r--r--target/linux/lantiq/falcon/config-5.48
-rw-r--r--target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse.dtsi6
-rw-r--r--target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9.dtsi7
-rw-r--r--target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube.dtsi10
-rw-r--r--target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon.dtsi7
-rw-r--r--target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9.dtsi27
-rw-r--r--target/linux/lantiq/patches-5.4/0001-MIPS-lantiq-add-pcie-driver.patch24
-rw-r--r--target/linux/lantiq/patches-5.4/0004-MIPS-lantiq-add-atm-hack.patch22
-rw-r--r--target/linux/lantiq/patches-5.4/0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch43
-rw-r--r--target/linux/lantiq/patches-5.4/0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch50
-rw-r--r--target/linux/lantiq/patches-5.4/0008-MIPS-lantiq-backport-old-timer-code.patch7
-rw-r--r--target/linux/lantiq/patches-5.4/0018-MTD-nand-lots-of-xrx200-fixes.patch19
-rw-r--r--target/linux/lantiq/patches-5.4/002-pinctrl-falcon-fix-syntax-error.patch25
-rw-r--r--target/linux/lantiq/patches-5.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch2
-rw-r--r--target/linux/lantiq/patches-5.4/0023-NET-PHY-add-led-support-for-intel-xway.patch4
-rw-r--r--target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch45
-rw-r--r--target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch55
-rw-r--r--target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch (renamed from target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch)57
-rw-r--r--target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch352
-rw-r--r--target/linux/lantiq/patches-5.4/0028-NET-lantiq-various-etop-fixes.patch100
-rw-r--r--target/linux/lantiq/patches-5.4/0030-GPIO-add-named-gpio-exports.patch18
-rw-r--r--target/linux/lantiq/patches-5.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch4
-rw-r--r--target/linux/lantiq/patches-5.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch6
-rw-r--r--target/linux/lantiq/patches-5.4/0042-arch-mips-increase-io_space_limit.patch2
-rw-r--r--target/linux/lantiq/patches-5.4/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch6
-rw-r--r--target/linux/lantiq/patches-5.4/0051-MIPS-lantiq-improve-USB-initialization.patch4
-rw-r--r--target/linux/lantiq/patches-5.4/0101-find_active_root.patch14
-rw-r--r--target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch216
-rw-r--r--target/linux/lantiq/patches-5.4/0152-lantiq-VPE.patch6
-rw-r--r--target/linux/lantiq/patches-5.4/0154-lantiq-pci-bar11mask-fix.patch4
-rw-r--r--target/linux/lantiq/patches-5.4/0160-owrt-lantiq-multiple-flash.patch8
-rw-r--r--target/linux/lantiq/patches-5.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch4
-rw-r--r--target/linux/lantiq/patches-5.4/0701-NET-lantiq-etop-of-mido.patch6
-rw-r--r--target/linux/lantiq/xrx200/config-5.417
-rw-r--r--target/linux/lantiq/xway/config-5.415
-rw-r--r--target/linux/lantiq/xway_legacy/config-5.43
39 files changed, 883 insertions, 366 deletions
diff --git a/target/linux/lantiq/Makefile b/target/linux/lantiq/Makefile
index 36e8af773f..b2b10c57bb 100644
--- a/target/linux/lantiq/Makefile
+++ b/target/linux/lantiq/Makefile
@@ -12,6 +12,7 @@ FEATURES:=squashfs
SUBTARGETS:=xrx200 xway xway_legacy falcon ase
KERNEL_PATCHVER:=4.19
+KERNEL_TESTING_PATCHVER:=5.4
define Target/Description
Build firmware images for Lantiq SoC
diff --git a/target/linux/lantiq/ase/config-5.4 b/target/linux/lantiq/ase/config-5.4
index 0c211847d2..159c57bca7 100644
--- a/target/linux/lantiq/ase/config-5.4
+++ b/target/linux/lantiq/ase/config-5.4
@@ -1,4 +1,5 @@
CONFIG_ADM6996_PHY=y
+CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_CPU_MIPSR1=y
@@ -6,17 +7,18 @@ CONFIG_CRC16=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_FIRMWARE_MEMMAP=y
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_ISDN is not set
-# CONFIG_LBDAF is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_MIPS_FPU_EMULATOR=y
CONFIG_NLS=y
# CONFIG_PSB6970_PHY is not set
# CONFIG_RTL8366_SMI is not set
+CONFIG_SGL_ALLOC=y
CONFIG_SOC_AMAZON_SE=y
# CONFIG_SOC_XWAY is not set
+CONFIG_TARGET_ISA_REV=1
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
diff --git a/target/linux/lantiq/config-5.4 b/target/linux/lantiq/config-5.4
index 560e8474dc..3d3b7db958 100644
--- a/target/linux/lantiq/config-5.4
+++ b/target/linux/lantiq/config-5.4
@@ -1,23 +1,30 @@
-CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_DMA_COHERENT_TO_PFN=y
+CONFIG_ARCH_HAS_DMA_PREP_COHERENT=y
+CONFIG_ARCH_HAS_DMA_WRITE_COMBINE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
+CONFIG_ARCH_HAS_UNCACHED_SEGMENT=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=15
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_MEMREMAP_PROT=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CEVT_R4K=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMPAT_32BIT_TIME=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_LOAD_STORE_LR=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_RIXI=y
CONFIG_CPU_HAS_SYNC=y
@@ -27,29 +34,31 @@ CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
-CONFIG_DMA_DIRECT_OPS=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
-CONFIG_DMA_NONCOHERENT_MMAP=y
-CONFIG_DMA_NONCOHERENT_OPS=y
CONFIG_DTC=y
# CONFIG_DT_EASY50712 is not set
CONFIG_EARLY_PRINTK=y
+CONFIG_EFI_EARLYCON=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_FIXED_PHY=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_AUTOSELECT=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_IPI=y
@@ -78,7 +87,7 @@ CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_COPY_THREAD_TLS=y
@@ -87,27 +96,27 @@ CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FAST_GUP=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PCI=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
@@ -125,6 +134,7 @@ CONFIG_LANTIQ_DT_NONE=y
CONFIG_LANTIQ_ETOP=y
CONFIG_LANTIQ_WDT=y
# CONFIG_LANTIQ_XRX200 is not set
+# CONFIG_LANTIQ_XRX200_LEGACY is not set
CONFIG_LEDS_GPIO=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
@@ -137,7 +147,6 @@ CONFIG_MIGRATION=y
CONFIG_MIPS=y
CONFIG_MIPS_ASID_BITS=8
CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
CONFIG_MIPS_CLOCK_VSYSCALL=y
# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
@@ -155,7 +164,6 @@ CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_LANTIQ=y
-CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_BRNIMAGE_FW=y
CONFIG_MTD_SPLIT_EVA_FW=y
@@ -180,6 +188,7 @@ CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHY_LANTIQ_RCU_USB2=y
+# CONFIG_PHY_LANTIQ_VRX200_PCIE is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_LANTIQ=y
# CONFIG_PINCTRL_SINGLE is not set
@@ -217,7 +226,9 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_SYS_SUPPORTS_MULTITHREADING=y
CONFIG_SYS_SUPPORTS_VPE_LOADER=y
+CONFIG_TARGET_ISA_REV=2
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TINY_SRCU=y
CONFIG_USE_OF=y
+CONFIG_WATCHDOG_CORE=y
# CONFIG_XRX200_PHY_FW is not set
diff --git a/target/linux/lantiq/falcon/config-5.4 b/target/linux/lantiq/falcon/config-5.4
index 84b36d0066..e2f94b54d0 100644
--- a/target/linux/lantiq/falcon/config-5.4
+++ b/target/linux/lantiq/falcon/config-5.4
@@ -1,12 +1,10 @@
-# CONFIG_MFD_CORE is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux"
CONFIG_PINCTRL_FALCON=y
# CONFIG_PSB6970_PHY is not set
-# CONFIG_RESET_LANTIQ is not set
# CONFIG_RTL8366_SMI is not set
CONFIG_SOC_FALCON=y
-# CONFIG_SOC_TYPE_XWAY is not set
# CONFIG_SOC_XWAY is not set
CONFIG_SPI_FALCON=y
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse.dtsi
index 496150b7a7..f2845ee4ac 100644
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse.dtsi
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/amazonse.dtsi
@@ -42,11 +42,7 @@
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
- reg = <0x80200 0x28
- 0x80228 0x28
- 0x80250 0x28
- 0x80278 0x28
- 0x802a0 0x28>;
+ reg = <0x80200 0xc8>;
};
watchdog@803f0 {
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9.dtsi
index 12af82b8ce..d4afd23f7b 100644
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9.dtsi
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/ar9.dtsi
@@ -42,11 +42,8 @@
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
- reg = <0x80200 0x28
- 0x80228 0x28
- 0x80250 0x28
- 0x80278 0x28
- 0x802a0 0x28>;
+ /* TODO: AR9 should have ICU1 (like VR9) too */
+ reg = <0x80200 0xc8>;
};
watchdog@803f0 {
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube.dtsi
index ae8c1c045a..eae613e008 100644
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -42,11 +42,11 @@
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
- reg = <0x80200 0x28
- 0x80228 0x28
- 0x80250 0x28
- 0x80278 0x28
- 0x802a0 0x28>;
+ /*
+ * There is a second ICU, but the SoC is not SMP
+ * capable.
+ */
+ reg = <0x80200 0xc8>;
};
watchdog@803f0 {
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon.dtsi
index dada3bcff2..cf9b33ea93 100644
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon.dtsi
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/falcon.dtsi
@@ -268,11 +268,8 @@
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
- reg = <0x80200 0x28
- 0x80228 0x28
- 0x80250 0x28
- 0x80278 0x28
- 0x802a0 0x28>;
+ /* TODO: Number of ICUs isn't known */
+ reg = <0x80200 0xc8>;
};
watchdog@803f0 {
diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9.dtsi
index 35b1f180a5..19f42d8c84 100644
--- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9.dtsi
+++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9.dtsi
@@ -1,4 +1,5 @@
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy-lantiq-vrx200-pcie.h>
/ {
#address-cells = <1>;
@@ -46,11 +47,8 @@
#interrupt-cells = <1>;
interrupt-controller;
compatible = "lantiq,icu";
- reg = <0x80200 0x28
- 0x80228 0x28
- 0x80250 0x28
- 0x80278 0x28
- 0x802a0 0x28>;
+ reg = <0x80200 0xc8 /* icu0 */
+ 0x80300 0xc8>; /* icu1 */
};
watchdog@803f0 {
@@ -100,6 +98,18 @@
interrupts = <150 151 152 153 154 155>;
};
+ pcie0_phy: phy@106800 {
+ compatible = "lantiq,vrx200-pcie-phy";
+ reg = <0x106800 0x100>;
+ lantiq,rcu = <&rcu0>;
+ lantiq,rcu-endian-offset = <0x4c>;
+ lantiq,rcu-big-endian-mask = <0x80>; /* bit 7 */
+ big-endian;
+ resets = <&reset0 12 24>, <&reset0 22 22>;
+ reset-names = "phy", "pcie";
+ #phy-cells = <1>;
+ };
+
rcu0: rcu@203000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -465,6 +475,13 @@
interrupt-parent = <&icu0>;
interrupts = <161 144>;
+ phys = <&pcie0_phy LANTIQ_PCIE_PHY_MODE_36MHZ>;
+ phy-names = "pcie";
+
+ resets = <&reset0 22 22>;
+
+ lantiq,rcu = <&rcu0>;
+
device_type = "pci";
gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/lantiq/patches-5.4/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-5.4/0001-MIPS-lantiq-add-pcie-driver.patch
index 4cea5547c2..bcd928aea9 100644
--- a/target/linux/lantiq/patches-5.4/0001-MIPS-lantiq-add-pcie-driver.patch
+++ b/target/linux/lantiq/patches-5.4/0001-MIPS-lantiq-add-pcie-driver.patch
@@ -44,12 +44,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
@@ -20,6 +20,7 @@ config SOC_XWAY
bool "XWAY"
select SOC_TYPE_XWAY
- select HW_HAS_PCI
+ select HAVE_PCI
+ select ARCH_SUPPORTS_MSI
select MFD_SYSCON
select MFD_CORE
-@@ -52,6 +53,15 @@ config PCI_LANTIQ
+@@ -52,4 +53,13 @@ config PCI_LANTIQ
bool "PCI Support"
depends on SOC_XWAY && PCI
@@ -62,12 +62,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ depends on PCIE_LANTIQ && PCI_MSI
+ default y
+
- config XRX200_PHY_FW
- bool "XRX200 PHY firmware loader"
- depends on SOC_XWAY
+ endif
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
-@@ -49,6 +49,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o
+@@ -51,6 +51,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o
obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o
obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
@@ -155,7 +153,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ ifx_pcie_rc_class_early_fixup);
--- a/arch/mips/pci/fixup-lantiq.c
+++ b/arch/mips/pci/fixup-lantiq.c
-@@ -8,12 +8,18 @@
+@@ -6,12 +6,18 @@
#include <linux/of_irq.h>
#include <linux/of_pci.h>
@@ -174,7 +172,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
if (ltq_pci_plat_arch_init)
return ltq_pci_plat_arch_init(dev);
-@@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev
+@@ -23,5 +29,10 @@ int pcibios_plat_dev_init(struct pci_dev
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
@@ -4143,7 +4141,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
--- a/arch/mips/pci/pci-legacy.c
+++ b/arch/mips/pci/pci-legacy.c
-@@ -311,3 +311,30 @@ char *__init pcibios_setup(char *str)
+@@ -308,3 +308,30 @@ char *__init pcibios_setup(char *str)
return pcibios_plat_setup(str);
return str;
}
@@ -5484,7 +5482,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
-@@ -54,6 +54,7 @@ config PCIEAER_INJECT
+@@ -52,6 +52,7 @@ config PCIEAER_INJECT
config PCIE_ECRC
bool "PCI Express ECRC settings control"
depends on PCIEAER
@@ -5494,7 +5492,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
(transaction layer end-to-end CRC checking).
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
-@@ -1325,6 +1325,8 @@ void pci_walk_bus(struct pci_bus *top, i
+@@ -1390,6 +1390,8 @@ void pci_walk_bus(struct pci_bus *top, i
void *userdata);
int pci_cfg_space_size(struct pci_dev *dev);
unsigned char pci_bus_max_busnr(struct pci_bus *bus);
@@ -5505,9 +5503,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
unsigned long type);
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
-@@ -1065,6 +1065,12 @@
+@@ -1072,6 +1072,12 @@
+ #define PCI_DEVICE_ID_SGI_IOC3 0x0003
#define PCI_DEVICE_ID_SGI_LITHIUM 0x1002
- #define PCI_DEVICE_ID_SGI_IOC4 0x100a
+#define PCI_VENDOR_ID_INFINEON 0x15D1
+#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F
diff --git a/target/linux/lantiq/patches-5.4/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-5.4/0004-MIPS-lantiq-add-atm-hack.patch
index b74642af14..1b1a0a1ca7 100644
--- a/target/linux/lantiq/patches-5.4/0004-MIPS-lantiq-add-atm-hack.patch
+++ b/target/linux/lantiq/patches-5.4/0004-MIPS-lantiq-add-atm-hack.patch
@@ -8,7 +8,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
arch/mips/include/asm/mach-lantiq/lantiq_atm.h | 196 +++++++++++++++++++++++
arch/mips/include/asm/mach-lantiq/lantiq_ptm.h | 203 ++++++++++++++++++++++++
arch/mips/lantiq/irq.c | 2 +
- arch/mips/mm/cache.c | 2 +
+ arch/mips/mm/cache.c | 4 +
include/uapi/linux/atm.h | 6 +
net/atm/common.c | 6 +
net/atm/proc.c | 2 +-
@@ -423,7 +423,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
-@@ -14,6 +14,7 @@
+@@ -12,6 +12,7 @@
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
@@ -431,25 +431,27 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
#include <asm/bootinfo.h>
#include <asm/irq_cpu.h>
-@@ -96,6 +97,7 @@ void ltq_mask_and_ack_irq(struct irq_dat
- ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier);
- ltq_icu_w32(im, BIT(offset), isr);
+@@ -91,6 +92,7 @@ void ltq_disable_irq(struct irq_data *d)
+ }
+ raw_spin_unlock_irqrestore(&ltq_icu_lock, flags);
}
+EXPORT_SYMBOL(ltq_mask_and_ack_irq);
- static void ltq_ack_irq(struct irq_data *d)
+ void ltq_mask_and_ack_irq(struct irq_data *d)
{
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
-@@ -64,6 +64,8 @@ void (*_dma_cache_wback)(unsigned long s
+@@ -62,6 +62,10 @@ void (*_dma_cache_wback_inv)(unsigned lo
+ void (*_dma_cache_wback)(unsigned long start, unsigned long size);
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_wback_inv);
+EXPORT_SYMBOL(_dma_cache_wback);
+EXPORT_SYMBOL(_dma_cache_inv);
-
++
#endif /* CONFIG_DMA_NONCOHERENT */
+ /*
--- a/include/uapi/linux/atm.h
+++ b/include/uapi/linux/atm.h
@@ -131,8 +131,14 @@
@@ -469,7 +471,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
int max_pcr; /* maximum PCR in cells per second */
--- a/net/atm/proc.c
+++ b/net/atm/proc.c
-@@ -141,7 +141,7 @@ static void *vcc_seq_next(struct seq_fil
+@@ -142,7 +142,7 @@ static void *vcc_seq_next(struct seq_fil
static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc)
{
static const char *const class_name[] = {
diff --git a/target/linux/lantiq/patches-5.4/0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch b/target/linux/lantiq/patches-5.4/0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch
deleted file mode 100644
index ccde787d2d..0000000000
--- a/target/linux/lantiq/patches-5.4/0005-lantiq_etop-pass-struct-device-to-DMA-API-functions.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 74e0deb89a8ba27c132b1f0e08643e215b5c1f92 Mon Sep 17 00:00:00 2001
-From: Christoph Hellwig <hch@lst.de>
-Date: Mon, 11 Feb 2019 14:20:00 +0100
-Subject: [PATCH] lantiq_etop: pass struct device to DMA API functions
-
-The DMA API generally relies on a struct device to work properly, and
-only barely works without one for legacy reasons. Pass the easily
-available struct device from the platform_device to remedy this.
-
-Note this driver seems to lack dma_unmap_* calls entirely, but fixing
-that is left for another time.
-
-Signed-off-by: Christoph Hellwig <hch@lst.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/lantiq_etop.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/lantiq_etop.c
-+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -112,10 +112,12 @@ struct ltq_etop_priv {
- static int
- ltq_etop_alloc_skb(struct ltq_etop_chan *ch)
- {
-+ struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
-+
- ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN);
- if (!ch->skb[ch->dma.desc])
- return -ENOMEM;
-- ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
-+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(&priv->pdev->dev,
- ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
- DMA_FROM_DEVICE);
- ch->dma.desc_base[ch->dma.desc].addr =
-@@ -493,7 +495,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
- netif_trans_update(dev);
-
- spin_lock_irqsave(&priv->lock, flags);
-- desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
-+ desc->addr = ((unsigned int) dma_map_single(&priv->pdev->dev, skb->data, len,
- DMA_TO_DEVICE)) - byte_offset;
- wmb();
- desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
diff --git a/target/linux/lantiq/patches-5.4/0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch b/target/linux/lantiq/patches-5.4/0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch
deleted file mode 100644
index 412dd62050..0000000000
--- a/target/linux/lantiq/patches-5.4/0006-MIPS-lantiq-pass-struct-device-to-DMA-API-functions.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 74f03104ed465ff71b11076ef620e4eaa53dbf74 Mon Sep 17 00:00:00 2001
-From: Christoph Hellwig <hch@lst.de>
-Date: Fri, 1 Feb 2019 09:47:44 +0100
-Subject: [PATCH] MIPS: lantiq: pass struct device to DMA API functions
-
-The DMA API generally relies on a struct device to work properly, and
-only barely works without one for legacy reasons. Pass the easily
-available struct device from the platform_device to remedy this.
-
-Also use GFP_KERNEL instead of GFP_ATOMIC as the gfp_t for the memory
-allocation, as we aren't in interrupt context or under a lock.
-
-Note that this whole function looks somewhat bogus given that we never
-even look at the returned dma address, and the CPHYSADDR magic on
-a returned noncached mapping looks "interesting". But I'll leave
-that to people more familiar with the code to sort out.
-
-Signed-off-by: Christoph Hellwig <hch@lst.de>
-Signed-off-by: Paul Burton <paul.burton@mips.com>
-Cc: John Crispin <john@phrozen.org>
-Cc: Vinod Koul <vkoul@kernel.org>
-Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
-Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
-Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
-Cc: Felipe Balbi <balbi@kernel.org>
-Cc: linux-mips@vger.kernel.org
-Cc: linux-kernel@vger.kernel.org
-Cc: dmaengine@vger.kernel.org
-Cc: netdev@vger.kernel.org
-Cc: linux-usb@vger.kernel.org
-Cc: linux-fbdev@vger.kernel.org
-Cc: alsa-devel@alsa-project.org
-Cc: iommu@lists.linux-foundation.org
----
- arch/mips/lantiq/xway/vmmc.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/lantiq/xway/vmmc.c
-+++ b/arch/mips/lantiq/xway/vmmc.c
-@@ -31,8 +31,8 @@ static int vmmc_probe(struct platform_de
- dma_addr_t dma;
-
- cp1_base =
-- (void *) CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE,
-- &dma, GFP_ATOMIC));
-+ (void *) CPHYSADDR(dma_alloc_coherent(&pdev->dev, CP1_SIZE,
-+ &dma, GFP_KERNEL));
-
- gpio_count = of_gpio_count(pdev->dev.of_node);
- while (gpio_count > 0) {
diff --git a/target/linux/lantiq/patches-5.4/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-5.4/0008-MIPS-lantiq-backport-old-timer-code.patch
index 52e4cbeb1b..1d869afd9a 100644
--- a/target/linux/lantiq/patches-5.4/0008-MIPS-lantiq-backport-old-timer-code.patch
+++ b/target/linux/lantiq/patches-5.4/0008-MIPS-lantiq-backport-old-timer-code.patch
@@ -172,7 +172,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
-@@ -1,3 +1,9 @@
+@@ -1,4 +1,10 @@
+ # SPDX-License-Identifier: GPL-2.0-only
-obj-y := prom.o sysctrl.o clk.o dma.o gptu.o dcdc.o
+obj-y := prom.o sysctrl.o clk.o dma.o dcdc.o
+
@@ -880,14 +881,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ int ret;
+ struct gptu_ioctl_param param;
+
-+ if (!access_ok(VERIFY_READ, (void __user *)arg, sizeof(struct gptu_ioctl_param)))
++ if (!access_ok((void __user *)arg, sizeof(struct gptu_ioctl_param)))
+ return -EFAULT;
+ copy_from_user(&param, (void __user *)arg, sizeof(param));
+
+ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
+ || GPTU_SET_COUNTER) && param.timer < 2)
+ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER)
-+ && !access_ok(VERIFY_WRITE, (void __user *)arg,
++ && !access_ok((void __user *)arg,
+ sizeof(struct gptu_ioctl_param)))
+ return -EFAULT;
+
diff --git a/target/linux/lantiq/patches-5.4/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-5.4/0018-MTD-nand-lots-of-xrx200-fixes.patch
index 4e34580efc..d68466c368 100644
--- a/target/linux/lantiq/patches-5.4/0018-MTD-nand-lots-of-xrx200-fixes.patch
+++ b/target/linux/lantiq/patches-5.4/0018-MTD-nand-lots-of-xrx200-fixes.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/mtd/nand/raw/xway_nand.c
+++ b/drivers/mtd/nand/raw/xway_nand.c
-@@ -63,6 +63,24 @@
+@@ -61,6 +61,24 @@
#define NAND_CON_CSMUX (1 << 1)
#define NAND_CON_NANDM 1
@@ -35,7 +35,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
struct xway_nand_data {
struct nand_chip chip;
unsigned long csflags;
-@@ -94,10 +112,22 @@ static void xway_select_chip(struct mtd_
+@@ -91,10 +109,22 @@ static void xway_select_chip(struct nand
case -1:
ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
@@ -58,11 +58,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
break;
-@@ -108,6 +138,12 @@ static void xway_select_chip(struct mtd_
-
- static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+@@ -107,6 +137,11 @@ static void xway_cmd_ctrl(struct nand_ch
{
-+
+ struct mtd_info *mtd = nand_to_mtd(chip);
+
+ if (req_mask) {
+ if (cmd != NAND_CMD_STATUS)
+ ltq_ebu_w32(0, EBU_NAND_WAIT); /* Clear nand ready */
@@ -71,7 +70,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
if (cmd == NAND_CMD_NONE)
return;
-@@ -118,6 +154,24 @@ static void xway_cmd_ctrl(struct mtd_inf
+@@ -117,6 +152,24 @@ static void xway_cmd_ctrl(struct nand_ch
while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
;
@@ -95,8 +94,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ }
}
- static int xway_dev_ready(struct mtd_info *mtd)
-@@ -157,6 +211,7 @@ static int xway_nand_probe(struct platfo
+ static int xway_dev_ready(struct nand_chip *chip)
+@@ -156,6 +209,7 @@ static int xway_nand_probe(struct platfo
int err;
u32 cs;
u32 cs_flag = 0;
@@ -104,7 +103,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
/* Allocate memory for the device structure (and zero it) */
data = devm_kzalloc(&pdev->dev, sizeof(struct xway_nand_data),
-@@ -192,6 +247,15 @@ static int xway_nand_probe(struct platfo
+@@ -191,6 +245,15 @@ static int xway_nand_probe(struct platfo
if (!err && cs == 1)
cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
diff --git a/target/linux/lantiq/patches-5.4/002-pinctrl-falcon-fix-syntax-error.patch b/target/linux/lantiq/patches-5.4/002-pinctrl-falcon-fix-syntax-error.patch
new file mode 100644
index 0000000000..40a833be54
--- /dev/null
+++ b/target/linux/lantiq/patches-5.4/002-pinctrl-falcon-fix-syntax-error.patch
@@ -0,0 +1,25 @@
+From d2fee0bb982195540e4fbe009996fcdbc26d163c Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Thu, 5 Mar 2020 08:17:27 +0100
+Subject: [PATCH] pinctrl: falcon: fix syntax error
+
+Add the missing semicolon after of_node_put to get the file compiled.
+
+Fixes: f17d2f54d36d ("pinctrl: falcon: Add of_node_put() before return")
+Cc: stable@vger.kernel.org # v5.4+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ drivers/pinctrl/pinctrl-falcon.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/pinctrl/pinctrl-falcon.c
++++ b/drivers/pinctrl/pinctrl-falcon.c
+@@ -451,7 +451,7 @@ static int pinctrl_falcon_probe(struct p
+ falcon_info.clk[*bank] = clk_get(&ppdev->dev, NULL);
+ if (IS_ERR(falcon_info.clk[*bank])) {
+ dev_err(&ppdev->dev, "failed to get clock\n");
+- of_node_put(np)
++ of_node_put(np);
+ return PTR_ERR(falcon_info.clk[*bank]);
+ }
+ falcon_info.membase[*bank] = devm_ioremap_resource(&pdev->dev,
diff --git a/target/linux/lantiq/patches-5.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-5.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
index 502c5af9f2..c1fc59487a 100644
--- a/target/linux/lantiq/patches-5.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
+++ b/target/linux/lantiq/patches-5.4/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -131,7 +131,11 @@ ltq_mtd_probe(struct platform_device *pd
+@@ -129,7 +129,11 @@ ltq_mtd_probe(struct platform_device *pd
if (!ltq_mtd->map)
return -ENOMEM;
diff --git a/target/linux/lantiq/patches-5.4/0023-NET-PHY-add-led-support-for-intel-xway.patch b/target/linux/lantiq/patches-5.4/0023-NET-PHY-add-led-support-for-intel-xway.patch
index e5ba24c3e7..5a668b6f56 100644
--- a/target/linux/lantiq/patches-5.4/0023-NET-PHY-add-led-support-for-intel-xway.patch
+++ b/target/linux/lantiq/patches-5.4/0023-NET-PHY-add-led-support-for-intel-xway.patch
@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
-@@ -154,6 +154,51 @@
+@@ -145,6 +145,51 @@
#define PHY_ID_PHY11G_VR9_1_2 0xD565A409
#define PHY_ID_PHY22F_VR9_1_2 0xD565A419
@@ -65,7 +65,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
static int xway_gphy_config_init(struct phy_device *phydev)
{
int err;
-@@ -192,6 +237,7 @@ static int xway_gphy_config_init(struct
+@@ -183,6 +228,7 @@ static int xway_gphy_config_init(struct
phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh);
phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl);
diff --git a/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch b/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch
deleted file mode 100644
index 7fbd97feca..0000000000
--- a/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-autoselect-soc-rev-matching-fw.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From ae0c287060749dc72c866484d12bd3cade8c517d Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Fri, 19 Jan 2018 20:19:06 +0100
-Subject: [PATCH] MIPS: lantiq: autoselect matching vr9 rev gphy firmware
-
-Add a custom xrx200 ethernet phy compatible to load the firmware matching
-the vr9 revision without specifing an expected revision.
-
-We have quite a few boards in the tree were later produced ones are using
-a more recent vr9. It is impossible to distinguish which revision of the
-vr9 is used without opening the case and removing a heatsink for some of
-them.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- drivers/soc/lantiq/gphy.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/drivers/soc/lantiq/gphy.c
-+++ b/drivers/soc/lantiq/gphy.c
-@@ -55,6 +55,7 @@ static const struct xway_gphy_match_data
- };
-
- static const struct of_device_id xway_gphy_match[] = {
-+ { .compatible = "lantiq,xrx200-gphy", .data = NULL },
- { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data },
- { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data },
- { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data },
-@@ -111,6 +112,16 @@ static int xway_gphy_of_probe(struct pla
-
- gphy_fw_name_cfg = of_device_get_match_data(dev);
-
-+ if (of_device_is_compatible(pdev->dev.of_node, "lantiq,xrx200-gphy"))
-+ switch (ltq_soc_type()) {
-+ case SOC_TYPE_VR9:
-+ gphy_fw_name_cfg = &xrx200a1x_gphy_data;
-+ break;
-+ case SOC_TYPE_VR9_2:
-+ gphy_fw_name_cfg = &xrx200a2x_gphy_data;
-+ break;
-+ }
-+
- priv->gphy_clk_gate = devm_clk_get(dev, NULL);
- if (IS_ERR(priv->gphy_clk_gate)) {
- dev_err(dev, "Failed to lookup gate clock\n");
diff --git a/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch b/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch
new file mode 100644
index 0000000000..a364d6d67b
--- /dev/null
+++ b/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch
@@ -0,0 +1,55 @@
+From d0ee51bbb7ce9880749a3d4794ec1fbbcda0f381 Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Sun, 7 Jul 2019 21:45:51 +0200
+Subject: [PATCH] MIPS: lantiq revert DSA switch driver PMU/clock changes
+
+Switch back to the former used names, to make the legacy switch driver
+happy.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ arch/mips/lantiq/xway/sysctrl.c | 14 +++++++-------
+ 1 file changed, 7 insertions(+), 7 deletions(-)
+
+--- a/arch/mips/lantiq/xway/sysctrl.c
++++ b/arch/mips/lantiq/xway/sysctrl.c
+@@ -503,7 +503,7 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
+ clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
+ clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
+- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
++ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
+ clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+ clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+ } else if (of_machine_is_compatible("lantiq,ar10")) {
+@@ -511,11 +511,11 @@ void __init ltq_soc_init(void)
+ ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz());
+ clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
+ clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
+- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH |
++ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH |
+ PMU_PPE_DP | PMU_PPE_TC);
+ clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+- clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY);
+- clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY);
++ clkdev_add_pmu("1f203020.gphy", NULL, 1, 0, PMU_GPHY);
++ clkdev_add_pmu("1f203068.gphy", NULL, 1, 0, PMU_GPHY);
+ clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+ clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
+ clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
+@@ -534,12 +534,12 @@ void __init ltq_soc_init(void)
+ clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);
+
+ clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
+- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0,
++ clkdev_add_pmu("1e108000.eth", NULL, 0, 0,
+ PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
+ PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
+ PMU_PPE_QSB | PMU_PPE_TOP);
+- clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY);
+- clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY);
++ clkdev_add_pmu("1f203020.gphy", NULL, 0, 0, PMU_GPHY);
++ clkdev_add_pmu("1f203068.gphy", NULL, 0, 0, PMU_GPHY);
+ clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
+ clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
+ clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
diff --git a/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch
index 4e5b55eb3e..6a2143e17e 100644
--- a/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
+++ b/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch
@@ -1,43 +1,43 @@
From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 22 Oct 2012 12:22:23 +0200
-Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver
---
drivers/net/ethernet/Kconfig | 8 +-
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/lantiq_pce.h | 163 +++
- drivers/net/ethernet/lantiq_xrx200.c | 1798 +++++++++++++++++++++++++++++++
- drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++
+ drivers/net/ethernet/lantiq_xrx200_legacy.c | 1798 +++++++++++++++++++++++++++++++
+ drivers/net/ethernet/lantiq_xrx200_legacy.h | 1328 +++++++++++++++++++++++
5 files changed, 3297 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/lantiq_pce.h
- create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
- create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h
+ create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.c
+ create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.h
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
-@@ -106,7 +106,13 @@ config LANTIQ_ETOP
+@@ -108,7 +108,13 @@ config LANTIQ_ETOP
tristate "Lantiq SoC ETOP driver"
depends on SOC_TYPE_XWAY
---help---
- Support for the MII0 inside the Lantiq SoC
+ Support for the MII0 inside the Lantiq ADSL SoC
+
-+config LANTIQ_XRX200
++config LANTIQ_XRX200_LEGACY
+ tristate "Lantiq SoC XRX200 driver"
+ depends on SOC_TYPE_XWAY
+ ---help---
+ Support for the MII0 inside the Lantiq VDSL SoC
- source "drivers/net/ethernet/marvell/Kconfig"
- source "drivers/net/ethernet/mediatek/Kconfig"
+ config LANTIQ_XRX200
+ tristate "Lantiq / Intel xRX200 PMAC network driver"
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal
- obj-$(CONFIG_JME) += jme.o
+@@ -51,6 +51,7 @@ obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
-+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
+ obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
++obj-$(CONFIG_LANTIQ_XRX200_LEGACY) += lantiq_xrx200_legacy.o
obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
@@ -208,8 +208,8 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+};
--- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -0,0 +1,1924 @@
++++ b/drivers/net/ethernet/lantiq_xrx200_legacy.c
+@@ -0,0 +1,1927 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
@@ -246,7 +246,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+#include <lantiq_soc.h>
+
+#include "lantiq_pce.h"
-+#include "lantiq_xrx200_sw.h"
++#include "lantiq_xrx200_legacy.h"
+
+#define SW_POLLING
+#define SW_ROUTING
@@ -1117,6 +1117,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+ if (XRX200_DMA_IS_RX(i))
+ napi_enable(&priv->hw->chan[i].napi);
+ ltq_dma_open(&priv->hw->chan[i].dma);
++ ltq_dma_enable_irq(&priv->hw->chan[i].dma);
+ }
+ priv->hw->chan[i].refcount++;
+ spin_unlock_bh(&priv->hw->chan[i].lock);
@@ -1604,16 +1605,18 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+ return PTR_ERR(phydev);
+ }
+
-+ phydev->supported &= (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_1000baseT_Half
-+ | SUPPORTED_1000baseT_Full
-+ | SUPPORTED_Autoneg
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
-+ phydev->advertising = phydev->supported;
++ linkmode_zero(phydev->supported);
++ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
++ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, phydev->supported);
++ linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, phydev->supported);
++ linkmode_set_bit_array(phy_10_100_features_array,
++ ARRAY_SIZE(phy_10_100_features_array),
++ phydev->supported);
++ linkmode_set_bit_array(phy_gbit_features_array,
++ ARRAY_SIZE(phy_gbit_features_array),
++ phydev->supported);
++ linkmode_copy(phydev->advertising, phydev->supported);
++
+ port->phydev = phydev;
+ phydev->phy_link_change = xrx200_phy_link_change;
+
@@ -1970,7 +1973,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+ priv->id = hw->num_devs;
+
+ mac = of_get_mac_address(iface);
-+ if (mac)
++ if (!IS_ERR(mac))
+ memcpy(priv->mac, mac, ETH_ALEN);
+
+ /* is this the wan interface ? */
@@ -2135,7 +2138,7 @@ Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
+MODULE_LICENSE("GPL");
--- /dev/null
-+++ b/drivers/net/ethernet/lantiq_xrx200_sw.h
++++ b/drivers/net/ethernet/lantiq_xrx200_legacy.h
@@ -0,0 +1,1328 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
diff --git a/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch b/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch
new file mode 100644
index 0000000000..8fd29161fe
--- /dev/null
+++ b/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch
@@ -0,0 +1,352 @@
+From c8eedcadc38a5e6008d3990fbe0a5285b30335fc Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Sun, 7 Jul 2019 21:48:56 +0200
+Subject: [PATCH] MIPS: lantiq: Add GPHY Firmware loader
+
+Upstream, the GPHY Firmware loader has been merged into the DSA switch
+driver. But we don't use the driver yet, so bring it back.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ .../bindings/mips/lantiq/rcu-gphy.txt | 36 +++
+ .../devicetree/bindings/mips/lantiq/rcu.txt | 18 ++
+ arch/mips/configs/xway_defconfig | 1 +
+ arch/mips/lantiq/Kconfig | 4 +
+ drivers/soc/lantiq/Makefile | 1 +
+ drivers/soc/lantiq/gphy.c | 224 ++++++++++++++++++
+ 6 files changed, 284 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
+ create mode 100644 drivers/soc/lantiq/gphy.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
+@@ -0,0 +1,37 @@
++Lantiq XWAY SoC GPHY binding
++============================
++
++This binding describes a software-defined ethernet PHY, provided by the RCU
++module on newer Lantiq XWAY SoCs (xRX200 and newer).
++
++-------------------------------------------------------------------------------
++Required properties:
++- compatible : Should be one of
++ "lantiq,xrx200-gphy"
++ "lantiq,xrx200a1x-gphy"
++ "lantiq,xrx200a2x-gphy"
++ "lantiq,xrx300-gphy"
++ "lantiq,xrx330-gphy"
++- reg : Addrress of the GPHY FW load address register
++- resets : Must reference the RCU GPHY reset bit
++- reset-names : One entry, value must be "gphy" or optional "gphy2"
++- clocks : A reference to the (PMU) GPHY clock gate
++
++Optional properties:
++- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in
++ <dt-bindings/mips/lantiq_xway_gphy.h>
++
++
++-------------------------------------------------------------------------------
++Example for the GPHys on the xRX200 SoCs:
++
++#include <dt-bindings/mips/lantiq_rcu_gphy.h>
++ gphy0: gphy@20 {
++ compatible = "lantiq,xrx200a2x-gphy";
++ reg = <0x20 0x4>;
++
++ resets = <&reset0 31 30>, <&reset1 7 7>;
++ reset-names = "gphy", "gphy2";
++ clocks = <&pmu0 XRX200_PMU_GATE_GPHY>;
++ lantiq,gphy-mode = <GPHY_MODE_GE>;
++ };
+--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
++++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
+@@ -26,6 +26,24 @@ Example of the RCU bindings on a xRX200
+ ranges = <0x0 0x203000 0x100>;
+ big-endian;
+
++ gphy0: gphy@20 {
++ compatible = "lantiq,xrx200a2x-gphy";
++ reg = <0x20 0x4>;
++
++ resets = <&reset0 31 30>, <&reset1 7 7>;
++ reset-names = "gphy", "gphy2";
++ lantiq,gphy-mode = <GPHY_MODE_GE>;
++ };
++
++ gphy1: gphy@68 {
++ compatible = "lantiq,xrx200a2x-gphy";
++ reg = <0x68 0x4>;
++
++ resets = <&reset0 29 28>, <&reset1 6 6>;
++ reset-names = "gphy", "gphy2";
++ lantiq,gphy-mode = <GPHY_MODE_GE>;
++ };
++
+ reset0: reset-controller@10 {
+ compatible = "lantiq,xrx200-reset";
+ reg = <0x10 4>, <0x14 4>;
+--- a/arch/mips/configs/xway_defconfig
++++ b/arch/mips/configs/xway_defconfig
+@@ -13,6 +13,7 @@ CONFIG_EMBEDDED=y
+ # CONFIG_COMPAT_BRK is not set
+ CONFIG_LANTIQ=y
+ CONFIG_PCI_LANTIQ=y
++CONFIG_XRX200_PHY_FW=y
+ CONFIG_CPU_MIPS32_R2=y
+ CONFIG_MIPS_VPE_LOADER=y
+ CONFIG_NR_CPUS=2
+--- a/arch/mips/lantiq/Kconfig
++++ b/arch/mips/lantiq/Kconfig
+@@ -62,4 +62,8 @@ config PCIE_LANTIQ_MSI
+ depends on PCIE_LANTIQ && PCI_MSI
+ default y
+
++config XRX200_PHY_FW
++ bool "XRX200 PHY firmware loader"
++ depends on SOC_XWAY
++
+ endif
+--- a/drivers/soc/lantiq/Makefile
++++ b/drivers/soc/lantiq/Makefile
+@@ -1,2 +1,3 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+ obj-y += fpi-bus.o
++obj-$(CONFIG_XRX200_PHY_FW) += gphy.o
+--- /dev/null
++++ b/drivers/soc/lantiq/gphy.c
+@@ -0,0 +1,235 @@
++/*
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ *
++ * Copyright (C) 2012 John Crispin <blogic@phrozen.org>
++ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
++ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de>
++ */
++
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/dma-mapping.h>
++#include <linux/firmware.h>
++#include <linux/mfd/syscon.h>
++#include <linux/module.h>
++#include <linux/reboot.h>
++#include <linux/regmap.h>
++#include <linux/reset.h>
++#include <linux/of_device.h>
++#include <linux/of_platform.h>
++#include <linux/property.h>
++#include <dt-bindings/mips/lantiq_rcu_gphy.h>
++
++#include <lantiq_soc.h>
++
++#define XRX200_GPHY_FW_ALIGN (16 * 1024)
++
++struct xway_gphy_priv {
++ struct clk *gphy_clk_gate;
++ struct reset_control *gphy_reset;
++ struct reset_control *gphy_reset2;
++ void __iomem *membase;
++ char *fw_name;
++};
++
++struct xway_gphy_match_data {
++ char *fe_firmware_name;
++ char *ge_firmware_name;
++};
++
++static const struct xway_gphy_match_data xrx200a1x_gphy_data = {
++ .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin",
++ .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin",
++};
++
++static const struct xway_gphy_match_data xrx200a2x_gphy_data = {
++ .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin",
++ .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin",
++};
++
++static const struct xway_gphy_match_data xrx300_gphy_data = {
++ .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin",
++ .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin",
++};
++
++static const struct of_device_id xway_gphy_match[] = {
++ { .compatible = "lantiq,xrx200-gphy", .data = NULL },
++ { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data },
++ { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data },
++ { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data },
++ { .compatible = "lantiq,xrx330-gphy", .data = &xrx300_gphy_data },
++ {},
++};
++MODULE_DEVICE_TABLE(of, xway_gphy_match);
++
++static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv,
++ dma_addr_t *dev_addr)
++{
++ const struct firmware *fw;
++ void *fw_addr;
++ dma_addr_t dma_addr;
++ size_t size;
++ int ret;
++
++ ret = request_firmware(&fw, priv->fw_name, dev);
++ if (ret) {
++ dev_err(dev, "failed to load firmware: %s, error: %i\n",
++ priv->fw_name, ret);
++ return ret;
++ }
++
++ /*
++ * GPHY cores need the firmware code in a persistent and contiguous
++ * memory area with a 16 kB boundary aligned start address.
++ */
++ size = fw->size + XRX200_GPHY_FW_ALIGN;
++
++ fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL);
++ if (fw_addr) {
++ fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN);
++ *dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
++ memcpy(fw_addr, fw->data, fw->size);
++ } else {
++ dev_err(dev, "failed to alloc firmware memory\n");
++ ret = -ENOMEM;
++ }
++
++ release_firmware(fw);
++
++ return ret;
++}
++
++static int xway_gphy_of_probe(struct platform_device *pdev,
++ struct xway_gphy_priv *priv)
++{
++ struct device *dev = &pdev->dev;
++ const struct xway_gphy_match_data *gphy_fw_name_cfg;
++ u32 gphy_mode;
++ int ret;
++ struct resource *res_gphy;
++
++ gphy_fw_name_cfg = of_device_get_match_data(dev);
++
++ if (of_device_is_compatible(pdev->dev.of_node, "lantiq,xrx200-gphy"))
++ switch (ltq_soc_type()) {
++ case SOC_TYPE_VR9:
++ gphy_fw_name_cfg = &xrx200a1x_gphy_data;
++ break;
++ case SOC_TYPE_VR9_2:
++ gphy_fw_name_cfg = &xrx200a2x_gphy_data;
++ break;
++ }
++
++ priv->gphy_clk_gate = devm_clk_get(dev, NULL);
++ if (IS_ERR(priv->gphy_clk_gate)) {
++ dev_err(dev, "Failed to lookup gate clock\n");
++ return PTR_ERR(priv->gphy_clk_gate);
++ }
++
++ res_gphy = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ priv->membase = devm_ioremap_resource(dev, res_gphy);
++ if (IS_ERR(priv->membase))
++ return PTR_ERR(priv->membase);
++
++ priv->gphy_reset = devm_reset_control_get(dev, "gphy");
++ if (IS_ERR(priv->gphy_reset)) {
++ if (PTR_ERR(priv->gphy_reset) != -EPROBE_DEFER)
++ dev_err(dev, "Failed to lookup gphy reset\n");
++ return PTR_ERR(priv->gphy_reset);
++ }
++
++ priv->gphy_reset2 = devm_reset_control_get_optional(dev, "gphy2");
++ if (IS_ERR(priv->gphy_reset2))
++ return PTR_ERR(priv->gphy_reset2);
++
++ ret = device_property_read_u32(dev, "lantiq,gphy-mode", &gphy_mode);
++ /* Default to GE mode */
++ if (ret)
++ gphy_mode = GPHY_MODE_GE;
++
++ switch (gphy_mode) {
++ case GPHY_MODE_FE:
++ priv->fw_name = gphy_fw_name_cfg->fe_firmware_name;
++ break;
++ case GPHY_MODE_GE:
++ priv->fw_name = gphy_fw_name_cfg->ge_firmware_name;
++ break;
++ default:
++ dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static int xway_gphy_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct xway_gphy_priv *priv;
++ dma_addr_t fw_addr = 0;
++ int ret;
++
++ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
++ if (!priv)
++ return -ENOMEM;
++
++ ret = xway_gphy_of_probe(pdev, priv);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(priv->gphy_clk_gate);
++ if (ret)
++ return ret;
++
++ ret = xway_gphy_load(dev, priv, &fw_addr);
++ if (ret) {
++ clk_disable_unprepare(priv->gphy_clk_gate);
++ return ret;
++ }
++
++ reset_control_assert(priv->gphy_reset);
++ reset_control_assert(priv->gphy_reset2);
++
++ iowrite32be(fw_addr, priv->membase);
++
++ reset_control_deassert(priv->gphy_reset);
++ reset_control_deassert(priv->gphy_reset2);
++
++ platform_set_drvdata(pdev, priv);
++
++ return ret;
++}
++
++static int xway_gphy_remove(struct platform_device *pdev)
++{
++ struct xway_gphy_priv *priv = platform_get_drvdata(pdev);
++
++ iowrite32be(0, priv->membase);
++
++ clk_disable_unprepare(priv->gphy_clk_gate);
++
++ return 0;
++}
++
++static struct platform_driver xway_gphy_driver = {
++ .probe = xway_gphy_probe,
++ .remove = xway_gphy_remove,
++ .driver = {
++ .name = "xway-rcu-gphy",
++ .of_match_table = xway_gphy_match,
++ },
++};
++
++module_platform_driver(xway_gphy_driver);
++
++MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin");
++MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin");
++MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin");
++MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin");
++MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin");
++MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin");
++MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
++MODULE_DESCRIPTION("Lantiq XWAY GPHY Firmware Loader");
++MODULE_LICENSE("GPL");
diff --git a/target/linux/lantiq/patches-5.4/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-5.4/0028-NET-lantiq-various-etop-fixes.patch
index a336af8a3c..094496a16d 100644
--- a/target/linux/lantiq/patches-5.4/0028-NET-lantiq-various-etop-fixes.patch
+++ b/target/linux/lantiq/patches-5.4/0028-NET-lantiq-various-etop-fixes.patch
@@ -10,16 +10,16 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -11,7 +11,7 @@
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
+@@ -1,7 +1,7 @@
+ // SPDX-License-Identifier: GPL-2.0-only
+ /*
*
- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ * Copyright (C) 2011-12 John Crispin <blogic@openwrt.org>
*/
#include <linux/kernel.h>
-@@ -30,11 +30,16 @@
+@@ -20,11 +20,16 @@
#include <linux/mm.h>
#include <linux/platform_device.h>
#include <linux/ethtool.h>
@@ -36,7 +36,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
#include <asm/checksum.h>
-@@ -42,7 +47,7 @@
+@@ -32,7 +37,7 @@
#include <xway_dma.h>
#include <lantiq_platform.h>
@@ -45,7 +45,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
#define MDIO_REQUEST 0x80000000
#define MDIO_READ 0x40000000
#define MDIO_ADDR_MASK 0x1f
-@@ -51,44 +56,91 @@
+@@ -41,44 +46,91 @@
#define MDIO_REG_OFFSET 0x10
#define MDIO_VAL_MASK 0xffff
@@ -152,7 +152,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
struct net_device *netdev;
struct napi_struct napi;
struct ltq_dma_channel dma;
-@@ -98,23 +150,36 @@ struct ltq_etop_chan {
+@@ -88,23 +140,36 @@ struct ltq_etop_chan {
struct ltq_etop_priv {
struct net_device *netdev;
struct platform_device *pdev;
@@ -194,7 +194,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
if (!ch->skb[ch->dma.desc])
return -ENOMEM;
ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(&priv->pdev->dev,
-@@ -149,8 +214,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
+@@ -139,8 +204,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan
spin_unlock_irqrestore(&priv->lock, flags);
skb_put(skb, len);
@@ -206,7 +206,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
}
static int
-@@ -158,7 +226,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
+@@ -148,7 +216,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
{
struct ltq_etop_chan *ch = container_of(napi,
struct ltq_etop_chan, napi);
@@ -216,7 +216,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
while (work_done < budget) {
struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
-@@ -170,7 +240,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
+@@ -160,7 +230,9 @@ ltq_etop_poll_rx(struct napi_struct *nap
}
if (work_done < budget) {
napi_complete_done(&ch->napi, work_done);
@@ -226,7 +226,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
}
return work_done;
}
-@@ -182,12 +254,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
+@@ -172,12 +244,14 @@ ltq_etop_poll_tx(struct napi_struct *nap
container_of(napi, struct ltq_etop_chan, napi);
struct ltq_etop_priv *priv = netdev_priv(ch->netdev);
struct netdev_queue *txq =
@@ -242,7 +242,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
dev_kfree_skb_any(ch->skb[ch->tx_free]);
ch->skb[ch->tx_free] = NULL;
memset(&ch->dma.desc_base[ch->tx_free], 0,
-@@ -200,7 +274,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
+@@ -190,7 +264,9 @@ ltq_etop_poll_tx(struct napi_struct *nap
if (netif_tx_queue_stopped(txq))
netif_tx_start_queue(txq);
napi_complete(&ch->napi);
@@ -252,7 +252,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
return 1;
}
-@@ -208,9 +284,10 @@ static irqreturn_t
+@@ -198,9 +274,10 @@ static irqreturn_t
ltq_etop_dma_irq(int irq, void *_priv)
{
struct ltq_etop_priv *priv = _priv;
@@ -266,7 +266,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
return IRQ_HANDLED;
}
-@@ -222,7 +299,7 @@ ltq_etop_free_channel(struct net_device
+@@ -212,7 +289,7 @@ ltq_etop_free_channel(struct net_device
ltq_dma_free(&ch->dma);
if (ch->dma.irq)
free_irq(ch->dma.irq, priv);
@@ -275,7 +275,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
int desc;
for (desc = 0; desc < LTQ_DESC_NUM; desc++)
dev_kfree_skb_any(ch->skb[ch->dma.desc]);
-@@ -233,66 +310,135 @@ static void
+@@ -223,66 +300,135 @@ static void
ltq_etop_hw_exit(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -331,10 +331,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
struct ltq_etop_priv *priv = netdev_priv(dev);
- int i;
+ int mii_mode = priv->mii_mode;
-+
-+ clk_enable(priv->clk_ppe);
- ltq_pmu_enable(PMU_PPE);
++ clk_enable(priv->clk_ppe);
+
+- switch (priv->pldata->mii_mode) {
+ if (of_machine_is_compatible("lantiq,ar9")) {
+ ltq_etop_gbit_init(dev);
+ /* force the etops link to the gbit to MII */
@@ -343,8 +344,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG);
+ ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX |
+ MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG);
-
-- switch (priv->pldata->mii_mode) {
++
+ switch (mii_mode) {
case PHY_INTERFACE_MODE_RMII:
- ltq_etop_w32_mask(ETOP_MII_MASK,
@@ -446,7 +446,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
}
static void
-@@ -311,6 +457,39 @@ static const struct ethtool_ops ltq_etop
+@@ -301,6 +447,39 @@ static const struct ethtool_ops ltq_etop
};
static int
@@ -486,7 +486,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data)
{
u32 val = MDIO_REQUEST |
-@@ -318,9 +497,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
+@@ -308,9 +487,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in
((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) |
phy_data;
@@ -498,7 +498,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
return 0;
}
-@@ -331,12 +510,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
+@@ -321,12 +500,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in
((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) |
((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET);
@@ -515,17 +515,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
return val;
}
-@@ -351,8 +530,18 @@ ltq_etop_mdio_probe(struct net_device *d
- {
+@@ -342,7 +521,10 @@ ltq_etop_mdio_probe(struct net_device *d
struct ltq_etop_priv *priv = netdev_priv(dev);
struct phy_device *phydev;
-+ u32 phy_supported = (SUPPORTED_10baseT_Half
-+ | SUPPORTED_10baseT_Full
-+ | SUPPORTED_100baseT_Half
-+ | SUPPORTED_100baseT_Full
-+ | SUPPORTED_Autoneg
-+ | SUPPORTED_MII
-+ | SUPPORTED_TP);
- phydev = phy_find_first(priv->mii_bus);
+ if (of_machine_is_compatible("lantiq,ase"))
@@ -535,7 +527,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
if (!phydev) {
netdev_err(dev, "no PHY found\n");
-@@ -360,21 +549,18 @@ ltq_etop_mdio_probe(struct net_device *d
+@@ -350,14 +532,17 @@ ltq_etop_mdio_probe(struct net_device *d
}
phydev = phy_connect(dev, phydev_name(phydev),
@@ -547,22 +539,15 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
return PTR_ERR(phydev);
}
-- phydev->supported &= (SUPPORTED_10baseT_Half
-- | SUPPORTED_10baseT_Full
-- | SUPPORTED_100baseT_Half
-- | SUPPORTED_100baseT_Full
-- | SUPPORTED_Autoneg
-- | SUPPORTED_MII
-- | SUPPORTED_TP);
+- phy_set_max_speed(phydev, SPEED_100);
+ if (of_machine_is_compatible("lantiq,ar9"))
-+ phy_supported |= SUPPORTED_1000baseT_Half
-+ | SUPPORTED_1000baseT_Full;
++ phy_set_max_speed(phydev, SPEED_1000);
++ else
++ phy_set_max_speed(phydev, SPEED_100);
-+ phydev->supported &= phy_supported;
- phydev->advertising = phydev->supported;
phy_attached_info(phydev);
-@@ -395,8 +581,13 @@ ltq_etop_mdio_init(struct net_device *de
+@@ -378,8 +563,13 @@ ltq_etop_mdio_init(struct net_device *de
}
priv->mii_bus->priv = dev;
@@ -578,7 +563,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
priv->mii_bus->name = "ltq_mii";
snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
priv->pdev->name, priv->pdev->id);
-@@ -433,17 +624,19 @@ static int
+@@ -416,18 +606,21 @@ static int
ltq_etop_open(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -592,7 +577,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+ spin_lock_irqsave(&priv->lock, flags);
+ ltq_dma_open(&priv->txch.dma);
++ ltq_dma_enable_irq(&priv->txch.dma);
+ ltq_dma_open(&priv->rxch.dma);
++ ltq_dma_enable_irq(&priv->rxch.dma);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ if (dev->phydev)
@@ -601,13 +588,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
- if (!IS_TX(i) && (!IS_RX(i)))
- continue;
- ltq_dma_open(&ch->dma);
+- ltq_dma_enable_irq(&ch->dma);
- napi_enable(&ch->napi);
- }
- phy_start(dev->phydev);
netif_tx_start_all_queues(dev);
return 0;
}
-@@ -452,18 +645,19 @@ static int
+@@ -436,18 +629,19 @@ static int
ltq_etop_stop(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -637,7 +625,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
return 0;
}
-@@ -473,16 +667,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -457,16 +651,16 @@ ltq_etop_tx(struct sk_buff *skb, struct
int queue = skb_get_queue_mapping(skb);
struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -659,7 +647,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
netdev_err(dev, "tx ring full\n");
netif_tx_stop_queue(txq);
return NETDEV_TX_BUSY;
-@@ -490,7 +684,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -474,7 +668,7 @@ ltq_etop_tx(struct sk_buff *skb, struct
/* dma needs to start on a 16 byte aligned address */
byte_offset = CPHYSADDR(skb->data) % 16;
@@ -668,7 +656,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
netif_trans_update(dev);
-@@ -500,11 +694,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
+@@ -484,11 +678,11 @@ ltq_etop_tx(struct sk_buff *skb, struct
wmb();
desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
@@ -683,7 +671,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
netif_tx_stop_queue(txq);
return NETDEV_TX_OK;
-@@ -515,11 +709,14 @@ ltq_etop_change_mtu(struct net_device *d
+@@ -499,11 +693,14 @@ ltq_etop_change_mtu(struct net_device *d
{
struct ltq_etop_priv *priv = netdev_priv(dev);
unsigned long flags;
@@ -699,7 +687,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
-@@ -579,6 +776,9 @@ ltq_etop_init(struct net_device *dev)
+@@ -563,6 +760,9 @@ ltq_etop_init(struct net_device *dev)
if (err)
goto err_hw;
ltq_etop_change_mtu(dev, 1500);
@@ -709,7 +697,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
if (!is_valid_ether_addr(mac.sa_data)) {
-@@ -596,9 +796,10 @@ ltq_etop_init(struct net_device *dev)
+@@ -580,9 +780,10 @@ ltq_etop_init(struct net_device *dev)
dev->addr_assign_type = NET_ADDR_RANDOM;
ltq_etop_set_multicast_list(dev);
@@ -723,7 +711,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
return 0;
err_netdev:
-@@ -618,6 +819,9 @@ ltq_etop_tx_timeout(struct net_device *d
+@@ -602,6 +803,9 @@ ltq_etop_tx_timeout(struct net_device *d
err = ltq_etop_hw_init(dev);
if (err)
goto err_hw;
@@ -733,7 +721,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
netif_trans_update(dev);
netif_wake_queue(dev);
return;
-@@ -641,14 +845,19 @@ static const struct net_device_ops ltq_e
+@@ -625,14 +829,19 @@ static const struct net_device_ops ltq_e
.ndo_tx_timeout = ltq_etop_tx_timeout,
};
@@ -757,7 +745,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
-@@ -674,31 +883,62 @@ ltq_etop_probe(struct platform_device *p
+@@ -658,31 +867,62 @@ ltq_etop_probe(struct platform_device *p
goto err_out;
}
@@ -835,7 +823,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
err = register_netdev(dev);
if (err)
-@@ -727,31 +967,22 @@ ltq_etop_remove(struct platform_device *
+@@ -711,31 +951,22 @@ ltq_etop_remove(struct platform_device *
return 0;
}
diff --git a/target/linux/lantiq/patches-5.4/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-5.4/0030-GPIO-add-named-gpio-exports.patch
index 8e3060d768..419516978c 100644
--- a/target/linux/lantiq/patches-5.4/0030-GPIO-add-named-gpio-exports.patch
+++ b/target/linux/lantiq/patches-5.4/0030-GPIO-add-named-gpio-exports.patch
@@ -13,7 +13,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
+@@ -19,6 +19,8 @@
#include <linux/pinctrl/pinctrl.h>
#include <linux/slab.h>
#include <linux/gpio/machine.h>
@@ -21,9 +21,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+#include <linux/platform_device.h>
#include "gpiolib.h"
-
-@@ -660,3 +662,72 @@ void of_gpiochip_remove(struct gpio_chip
- gpiochip_remove_pin_ranges(chip);
+ #include "gpiolib-of.h"
+@@ -915,3 +917,72 @@ void of_gpiochip_remove(struct gpio_chip
+ {
of_node_put(chip->of_node);
}
+
@@ -112,7 +112,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
{
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
-@@ -533,6 +533,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
+@@ -668,6 +668,7 @@ static inline void devm_acpi_dev_remove_
#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
@@ -120,7 +120,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
-@@ -540,6 +541,13 @@ void gpiod_unexport(struct gpio_desc *de
+@@ -675,6 +676,13 @@ void gpiod_unexport(struct gpio_desc *de
#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
@@ -136,7 +136,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
{
--- a/drivers/gpio/gpiolib-sysfs.c
+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -568,7 +568,7 @@ static struct class gpio_class = {
+@@ -563,7 +563,7 @@ static struct class gpio_class = {
*
* Returns zero on success, else an error.
*/
@@ -145,7 +145,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
{
struct gpio_chip *chip;
struct gpio_device *gdev;
-@@ -630,6 +630,8 @@ int gpiod_export(struct gpio_desc *desc,
+@@ -625,6 +625,8 @@ int gpiod_export(struct gpio_desc *desc,
offset = gpio_chip_hwgpio(desc);
if (chip->names && chip->names[offset])
ioname = chip->names[offset];
@@ -154,7 +154,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
dev = device_create_with_groups(&gpio_class, &gdev->dev,
MKDEV(0, 0), data, gpio_groups,
-@@ -651,6 +653,12 @@ err_unlock:
+@@ -646,6 +648,12 @@ err_unlock:
gpiod_dbg(desc, "%s: status %d\n", __func__, status);
return status;
}
diff --git a/target/linux/lantiq/patches-5.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-5.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
index eed32d3097..2493da32ec 100644
--- a/target/linux/lantiq/patches-5.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
+++ b/target/linux/lantiq/patches-5.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch
@@ -18,7 +18,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -691,6 +691,16 @@ config I2C_MESON
+@@ -729,6 +729,16 @@ config I2C_MESON
If you say yes to this option, support will be included for the
I2C interface on the Amlogic Meson family of SoCs.
@@ -37,7 +37,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
depends on PPC
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
-@@ -67,6 +67,7 @@ obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-l
+@@ -73,6 +73,7 @@ obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-l
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
diff --git a/target/linux/lantiq/patches-5.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-5.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
index a382b9117c..82567be690 100644
--- a/target/linux/lantiq/patches-5.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
+++ b/target/linux/lantiq/patches-5.4/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch
@@ -16,7 +16,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
-@@ -104,5 +104,8 @@ int xrx200_gphy_boot(struct device *dev,
+@@ -102,5 +102,8 @@ int xrx200_gphy_boot(struct device *dev,
extern void ltq_pmu_enable(unsigned int module);
extern void ltq_pmu_disable(unsigned int module);
@@ -27,7 +27,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
#endif /* _LTQ_XWAY_H__ */
--- a/arch/mips/lantiq/xway/Makefile
+++ b/arch/mips/lantiq/xway/Makefile
-@@ -7,3 +7,6 @@ obj-y += timer.o
+@@ -8,3 +8,6 @@ obj-y += timer.o
endif
obj-y += vmmc.o
@@ -203,7 +203,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+early_param("ethaddr", setup_ethaddr);
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -780,7 +780,11 @@ ltq_etop_init(struct net_device *dev)
+@@ -764,7 +764,11 @@ ltq_etop_init(struct net_device *dev)
if (err)
goto err_hw;
diff --git a/target/linux/lantiq/patches-5.4/0042-arch-mips-increase-io_space_limit.patch b/target/linux/lantiq/patches-5.4/0042-arch-mips-increase-io_space_limit.patch
index 7165dd0070..7c0d10ed10 100644
--- a/target/linux/lantiq/patches-5.4/0042-arch-mips-increase-io_space_limit.patch
+++ b/target/linux/lantiq/patches-5.4/0042-arch-mips-increase-io_space_limit.patch
@@ -12,7 +12,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
-@@ -52,7 +52,7 @@
+@@ -53,7 +53,7 @@
/* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */
diff --git a/target/linux/lantiq/patches-5.4/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-5.4/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
index fed65e5321..d63d48ad1f 100644
--- a/target/linux/lantiq/patches-5.4/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
+++ b/target/linux/lantiq/patches-5.4/0050-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch
@@ -23,7 +23,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
-@@ -91,7 +91,14 @@ static void dwc2_set_rk_params(struct dw
+@@ -92,7 +92,14 @@ static void dwc2_set_rk_params(struct dw
p->power_down = 0;
}
@@ -39,7 +39,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
{
struct dwc2_core_params *p = &hsotg->params;
-@@ -99,12 +106,20 @@ static void dwc2_set_ltq_params(struct d
+@@ -100,12 +107,20 @@ static void dwc2_set_ltq_params(struct d
p->host_rx_fifo_size = 288;
p->host_nperio_tx_fifo_size = 128;
p->host_perio_tx_fifo_size = 96;
@@ -62,7 +62,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
-@@ -156,8 +171,11 @@ const struct of_device_id dwc2_of_match_
+@@ -167,8 +182,11 @@ const struct of_device_id dwc2_of_match_
{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params },
{ .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params },
diff --git a/target/linux/lantiq/patches-5.4/0051-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-5.4/0051-MIPS-lantiq-improve-USB-initialization.patch
index a7bdafd704..3f276e1158 100644
--- a/target/linux/lantiq/patches-5.4/0051-MIPS-lantiq-improve-USB-initialization.patch
+++ b/target/linux/lantiq/patches-5.4/0051-MIPS-lantiq-improve-USB-initialization.patch
@@ -15,7 +15,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -246,6 +246,25 @@ static void pmu_disable(struct clk *clk)
+@@ -244,6 +244,25 @@ static void pmu_disable(struct clk *clk)
pr_warn("deactivating PMU module failed!");
}
@@ -41,7 +41,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
/* the pci enable helper */
static int pci_enable(struct clk *clk)
{
-@@ -567,4 +586,5 @@ void __init ltq_soc_init(void)
+@@ -565,4 +584,5 @@ void __init ltq_soc_init(void)
clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
}
diff --git a/target/linux/lantiq/patches-5.4/0101-find_active_root.patch b/target/linux/lantiq/patches-5.4/0101-find_active_root.patch
index f48b5b7c65..b6b4ab7409 100644
--- a/target/linux/lantiq/patches-5.4/0101-find_active_root.patch
+++ b/target/linux/lantiq/patches-5.4/0101-find_active_root.patch
@@ -1,6 +1,6 @@
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,6 +25,38 @@ static bool node_has_compatible(struct d
+--- a/drivers/mtd/parsers/ofpart.c
++++ b/drivers/mtd/parsers/ofpart.c
+@@ -21,6 +21,38 @@ static bool node_has_compatible(struct d
return of_get_property(pp, "compatible", NULL);
}
@@ -39,7 +39,7 @@
static int parse_fixed_partitions(struct mtd_info *master,
const struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
-@@ -36,7 +68,8 @@ static int parse_fixed_partitions(struct
+@@ -32,7 +64,8 @@ static int parse_fixed_partitions(struct
struct device_node *pp;
int nr_parts, i, ret = 0;
bool dedicated = true;
@@ -49,7 +49,7 @@
/* Pull of_node from the master device node */
mtd_node = mtd_get_of_node(master);
-@@ -72,7 +105,9 @@ static int parse_fixed_partitions(struct
+@@ -68,7 +101,9 @@ static int parse_fixed_partitions(struct
return 0;
parts = kcalloc(nr_parts, sizeof(*parts), GFP_KERNEL);
@@ -60,7 +60,7 @@
return -ENOMEM;
i = 0;
-@@ -121,12 +156,22 @@ static int parse_fixed_partitions(struct
+@@ -117,12 +152,22 @@ static int parse_fixed_partitions(struct
if (of_get_property(pp, "lock", &len))
parts[i].mask_flags |= MTD_POWERUP_LOCK;
@@ -83,7 +83,7 @@
*pparts = parts;
return nr_parts;
-@@ -137,6 +182,7 @@ ofpart_fail:
+@@ -133,6 +178,7 @@ ofpart_fail:
ofpart_none:
of_node_put(pp);
kfree(parts);
diff --git a/target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch
index b081871191..bc02a58b1c 100644
--- a/target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch
+++ b/target/linux/lantiq/patches-5.4/0151-lantiq-ifxmips_pcie-use-of.patch
@@ -1,7 +1,13 @@
--- a/arch/mips/pci/ifxmips_pcie.c
+++ b/arch/mips/pci/ifxmips_pcie.c
-@@ -18,6 +18,9 @@
+@@ -16,8 +16,15 @@
+ #include <asm/paccess.h>
+ #include <linux/pci.h>
#include <linux/pci_regs.h>
++#include <linux/phy/phy.h>
++#include <linux/regmap.h>
++#include <linux/reset.h>
++#include <linux/mfd/syscon.h>
#include <linux/module.h>
+#include <linux/of_gpio.h>
@@ -10,15 +16,18 @@
#include "ifxmips_pcie.h"
#include "ifxmips_pcie_reg.h"
-@@ -40,6 +43,7 @@
+@@ -40,6 +47,10 @@
static DEFINE_SPINLOCK(ifx_pcie_lock);
u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG);
+static int pcie_reset_gpio;
++static struct phy *ltq_pcie_phy;
++static struct reset_control *ltq_pcie_reset;
++static struct regmap *ltq_rcu_regmap;
static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = {
{
-@@ -82,6 +86,22 @@ void ifx_pcie_debug(const char *fmt, ...
+@@ -82,6 +93,22 @@ void ifx_pcie_debug(const char *fmt, ...
printk("%s", buf);
}
@@ -41,7 +50,80 @@
static inline int pcie_ltssm_enable(int pcie_port)
{
-@@ -1045,17 +1065,52 @@ pcie_rc_initialize(int pcie_port)
+@@ -988,10 +1015,22 @@ int ifx_pcie_bios_plat_dev_init(struct
+ static int
+ pcie_rc_initialize(int pcie_port)
+ {
+- int i;
++ int i, ret;
+ #define IFX_PCIE_PHY_LOOP_CNT 5
+
+- pcie_rcu_endian_setup(pcie_port);
++ regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_PCIE_M,
++ IFX_RCU_AHB_BE_PCIE_M);
++
++#ifdef CONFIG_IFX_PCIE_HW_SWAP
++ regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_PCIE_S,
++ IFX_RCU_AHB_BE_PCIE_S);
++#else
++ regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_PCIE_S,
++ 0x0);
++#endif
++
++ regmap_update_bits(ltq_rcu_regmap, 0x4c, IFX_RCU_AHB_BE_XBAR_M,
++ 0x0);
+
+ pcie_ep_gpio_rst_init(pcie_port);
+
+@@ -1000,26 +1039,21 @@ pcie_rc_initialize(int pcie_port)
+ * reset PCIe PHY will solve this issue
+ */
+ for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) {
+- /* Disable PCIe PHY Analog part for sanity check */
+- pcie_phy_pmu_disable(pcie_port);
+-
+- pcie_phy_rst_assert(pcie_port);
+- pcie_phy_rst_deassert(pcie_port);
+-
+- /* Make sure PHY PLL is stable */
+- udelay(20);
+-
+- /* PCIe Core reset enabled, low active, sw programmed */
+- pcie_core_rst_assert(pcie_port);
++ ret = phy_init(ltq_pcie_phy);
++ if (ret)
++ continue;
+
+ /* Put PCIe EP in reset status */
+ pcie_device_rst_assert(pcie_port);
+
+- /* PCI PHY & Core reset disabled, high active, sw programmed */
+- pcie_core_rst_deassert(pcie_port);
++ udelay(1);
++ reset_control_deassert(ltq_pcie_reset);
+
+- /* Already in a quiet state, program PLL, enable PHY, check ready bit */
+- pcie_phy_clock_mode_setup(pcie_port);
++ ret = phy_power_on(ltq_pcie_phy);
++ if (ret) {
++ phy_exit(ltq_pcie_phy);
++ continue;
++ }
+
+ /* Enable PCIe PHY and Clock */
+ pcie_core_pmu_setup(pcie_port);
+@@ -1035,6 +1069,10 @@ pcie_rc_initialize(int pcie_port)
+ /* Once link is up, break out */
+ if (pcie_app_loigc_setup(pcie_port) == 0)
+ break;
++
++ phy_power_off(ltq_pcie_phy);
++ reset_control_assert(ltq_pcie_reset);
++ phy_exit(ltq_pcie_phy);
+ }
+ if (i >= IFX_PCIE_PHY_LOOP_CNT) {
+ printk(KERN_ERR "%s link up failed!!!!!\n", __func__);
+@@ -1045,17 +1083,67 @@ pcie_rc_initialize(int pcie_port)
return 0;
}
@@ -52,7 +134,6 @@
void __iomem *io_map_base;
int pcie_port;
int startup_port;
-
+ struct device_node *np;
+ struct pci_bus *bus;
+
@@ -76,13 +157,29 @@
+ if (!bus)
+ return -EPROBE_DEFER;
+ }
-+
+
/* Enable AHB Master/ Slave */
pcie_ahb_pmu_setup();
startup_port = IFX_PCIE_PORT0;
-
+
++ ltq_pcie_phy = devm_phy_get(&pdev->dev, "pcie");
++ if (IS_ERR(ltq_pcie_phy)) {
++ dev_err(&pdev->dev, "failed to get the PCIe PHY\n");
++ return PTR_ERR(ltq_pcie_phy);
++ }
++
++ ltq_pcie_reset = devm_reset_control_get_shared(&pdev->dev, NULL);
++ if (IS_ERR(ltq_pcie_reset)) {
++ dev_err(&pdev->dev, "failed to get the PCIe reset line\n");
++ return PTR_ERR(ltq_pcie_reset);
++ }
++
++ ltq_rcu_regmap = syscon_regmap_lookup_by_phandle(node, "lantiq,rcu");
++ if (IS_ERR(ltq_rcu_regmap))
++ return PTR_ERR(ltq_rcu_regmap);
++
+ pcie_reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
+ if (gpio_is_valid(pcie_reset_gpio)) {
+ int ret = devm_gpio_request(&pdev->dev, pcie_reset_gpio, "pcie-reset");
@@ -96,7 +193,7 @@
for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){
if (pcie_rc_initialize(pcie_port) == 0) {
IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n",
-@@ -1067,6 +1122,7 @@ static int __init ifx_pcie_bios_init(voi
+@@ -1067,6 +1155,7 @@ static int __init ifx_pcie_bios_init(voi
return -ENOMEM;
}
ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base;
@@ -104,7 +201,7 @@
register_pci_controller(&ifx_pcie_controller[pcie_port].pcic);
/* XXX, clear error status */
-@@ -1083,6 +1139,30 @@ static int __init ifx_pcie_bios_init(voi
+@@ -1083,6 +1172,30 @@ static int __init ifx_pcie_bios_init(voi
return 0;
}
@@ -168,10 +265,98 @@
static inline void pcie_ahb_pmu_setup(void)
{
/* Enable AHB bus master/slave */
-@@ -180,20 +163,6 @@ static inline void pcie_phy_rst_deassert
- IFX_REG_W32(reg, IFX_RCU_RST_REQ);
+@@ -79,24 +62,6 @@ static inline void pcie_ahb_pmu_setup(vo
+ //AHBS_PMU_SETUP(IFX_PMU_ENABLE);
+ }
+
+-static inline void pcie_rcu_endian_setup(int pcie_port)
+-{
+- u32 reg;
+-
+- reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
+-#ifdef CONFIG_IFX_PCIE_HW_SWAP
+- reg |= IFX_RCU_AHB_BE_PCIE_M;
+- reg |= IFX_RCU_AHB_BE_PCIE_S;
+- reg &= ~IFX_RCU_AHB_BE_XBAR_M;
+-#else
+- reg |= IFX_RCU_AHB_BE_PCIE_M;
+- reg &= ~IFX_RCU_AHB_BE_PCIE_S;
+- reg &= ~IFX_RCU_AHB_BE_XBAR_M;
+-#endif /* CONFIG_IFX_PCIE_HW_SWAP */
+- IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
+- IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN));
+-}
+-
+ static inline void pcie_phy_pmu_enable(int pcie_port)
+ {
+ struct clk *clk;
+@@ -115,17 +80,6 @@ static inline void pcie_phy_pmu_disable(
+ // PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE);
+ }
+
+-static inline void pcie_pdi_big_endian(int pcie_port)
+-{
+- u32 reg;
+-
+- /* SRAM2PDI endianness control. */
+- reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN);
+- /* Config AHB->PCIe and PDI endianness */
+- reg |= IFX_RCU_AHB_BE_PCIE_PDI;
+- IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN);
+-}
+-
+ static inline void pcie_pdi_pmu_enable(int pcie_port)
+ {
+ /* Enable PDI to access PCIe PHY register */
+@@ -135,65 +89,6 @@ static inline void pcie_pdi_pmu_enable(i
+ //PDI_PMU_SETUP(IFX_PMU_ENABLE);
}
+-static inline void pcie_core_rst_assert(int pcie_port)
+-{
+- u32 reg;
+-
+- reg = IFX_REG_R32(IFX_RCU_RST_REQ);
+-
+- /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */
+- reg |= 0x00400000;
+- IFX_REG_W32(reg, IFX_RCU_RST_REQ);
+-}
+-
+-static inline void pcie_core_rst_deassert(int pcie_port)
+-{
+- u32 reg;
+-
+- /* Make sure one micro-second delay */
+- udelay(1);
+-
+- /* Reset PCIe PHY & Core, bit 22 */
+- reg = IFX_REG_R32(IFX_RCU_RST_REQ);
+- reg &= ~0x00400000;
+- IFX_REG_W32(reg, IFX_RCU_RST_REQ);
+-}
+-
+-static inline void pcie_phy_rst_assert(int pcie_port)
+-{
+- u32 reg;
+-
+- reg = IFX_REG_R32(IFX_RCU_RST_REQ);
+- reg |= 0x00001000; /* Bit 12 */
+- IFX_REG_W32(reg, IFX_RCU_RST_REQ);
+-}
+-
+-static inline void pcie_phy_rst_deassert(int pcie_port)
+-{
+- u32 reg;
+-
+- /* Make sure one micro-second delay */
+- udelay(1);
+-
+- reg = IFX_REG_R32(IFX_RCU_RST_REQ);
+- reg &= ~0x00001000; /* Bit 12 */
+- IFX_REG_W32(reg, IFX_RCU_RST_REQ);
+-}
+-
-static inline void pcie_device_rst_assert(int pcie_port)
-{
- gpio_set_value(IFX_PCIE_GPIO_RESET, 0);
@@ -189,3 +374,14 @@
static inline void pcie_core_pmu_setup(int pcie_port)
{
struct clk *clk;
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -51,7 +51,7 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o
+ obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o
+ obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
+ obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
+-obj-$(CONFIG_PCIE_LANTIQ) += ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o
++obj-$(CONFIG_PCIE_LANTIQ) += ifxmips_pcie.o fixup-lantiq-pcie.o
+ obj-$(CONFIG_PCIE_LANTIQ_MSI) += pcie-lantiq-msi.o
+ obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+ obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
diff --git a/target/linux/lantiq/patches-5.4/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-5.4/0152-lantiq-VPE.patch
index 9e39427c6a..f454055824 100644
--- a/target/linux/lantiq/patches-5.4/0152-lantiq-VPE.patch
+++ b/target/linux/lantiq/patches-5.4/0152-lantiq-VPE.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -2318,6 +2318,12 @@ config MIPS_VPE_LOADER
+@@ -2375,6 +2375,12 @@ config MIPS_VPE_LOADER
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
@@ -142,7 +142,7 @@
{
--- a/arch/mips/lantiq/prom.c
+++ b/arch/mips/lantiq/prom.c
-@@ -36,10 +36,14 @@ unsigned long physical_memsize = 0L;
+@@ -34,10 +34,14 @@ unsigned long physical_memsize = 0L;
*/
static struct ltq_soc_info soc_info;
@@ -169,7 +169,7 @@
#define read_c0_tcstatus() __read_32bit_c0_register($2, 1)
#define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val)
-@@ -377,6 +380,8 @@ do { \
+@@ -378,6 +381,8 @@ do { \
#define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val)
#define read_vpe_c0_vpeconf1() mftc0(1, 3)
#define write_vpe_c0_vpeconf1(val) mttc0(1, 3, val)
diff --git a/target/linux/lantiq/patches-5.4/0154-lantiq-pci-bar11mask-fix.patch b/target/linux/lantiq/patches-5.4/0154-lantiq-pci-bar11mask-fix.patch
index d0acd4bb10..d6556d115d 100644
--- a/target/linux/lantiq/patches-5.4/0154-lantiq-pci-bar11mask-fix.patch
+++ b/target/linux/lantiq/patches-5.4/0154-lantiq-pci-bar11mask-fix.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/pci/pci-lantiq.c
+++ b/arch/mips/pci/pci-lantiq.c
-@@ -61,6 +61,8 @@
+@@ -59,6 +59,8 @@
#define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
#define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
@@ -9,7 +9,7 @@
__iomem void *ltq_pci_mapped_cfg;
static __iomem void *ltq_pci_membase;
-@@ -86,8 +88,8 @@ static inline u32 ltq_calc_bar11mask(voi
+@@ -84,8 +86,8 @@ static inline u32 ltq_calc_bar11mask(voi
u32 mem, bar11mask;
/* BAR11MASK value depends on available memory on system. */
diff --git a/target/linux/lantiq/patches-5.4/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-5.4/0160-owrt-lantiq-multiple-flash.patch
index 304ff4bac8..796220b2bc 100644
--- a/target/linux/lantiq/patches-5.4/0160-owrt-lantiq-multiple-flash.patch
+++ b/target/linux/lantiq/patches-5.4/0160-owrt-lantiq-multiple-flash.patch
@@ -1,6 +1,6 @@
--- a/drivers/mtd/maps/lantiq-flash.c
+++ b/drivers/mtd/maps/lantiq-flash.c
-@@ -19,6 +19,7 @@
+@@ -17,6 +17,7 @@
#include <linux/mtd/cfi.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
@@ -8,7 +8,7 @@
#include <linux/of.h>
#include <lantiq_soc.h>
-@@ -38,13 +39,16 @@ enum {
+@@ -36,13 +37,16 @@ enum {
LTQ_NOR_NORMAL
};
@@ -28,7 +28,7 @@
static map_word
ltq_read16(struct map_info *map, unsigned long adr)
-@@ -108,11 +112,43 @@ ltq_copy_to(struct map_info *map, unsign
+@@ -106,11 +110,43 @@ ltq_copy_to(struct map_info *map, unsign
}
static int
@@ -73,7 +73,7 @@
ltq_mtd = devm_kzalloc(&pdev->dev, sizeof(struct ltq_mtd), GFP_KERNEL);
if (!ltq_mtd)
-@@ -120,75 +156,89 @@ ltq_mtd_probe(struct platform_device *pd
+@@ -118,75 +154,89 @@ ltq_mtd_probe(struct platform_device *pd
platform_set_drvdata(pdev, ltq_mtd);
diff --git a/target/linux/lantiq/patches-5.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch b/target/linux/lantiq/patches-5.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
index b98abe8b4b..1beef0e1fe 100644
--- a/target/linux/lantiq/patches-5.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
+++ b/target/linux/lantiq/patches-5.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
-@@ -424,6 +424,20 @@ static void clkdev_add_clkout(void)
+@@ -422,6 +422,20 @@ static void clkdev_add_clkout(void)
}
}
@@ -21,7 +21,7 @@
/* bring up all register ranges that we need for basic system control */
void __init ltq_soc_init(void)
{
-@@ -587,4 +601,6 @@ void __init ltq_soc_init(void)
+@@ -585,4 +599,6 @@ void __init ltq_soc_init(void)
clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
}
usb_set_clock();
diff --git a/target/linux/lantiq/patches-5.4/0701-NET-lantiq-etop-of-mido.patch b/target/linux/lantiq/patches-5.4/0701-NET-lantiq-etop-of-mido.patch
index 05e4ec8328..2cc541ae3c 100644
--- a/target/linux/lantiq/patches-5.4/0701-NET-lantiq-etop-of-mido.patch
+++ b/target/linux/lantiq/patches-5.4/0701-NET-lantiq-etop-of-mido.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
-@@ -40,6 +40,7 @@
+@@ -30,6 +30,7 @@
#include <linux/of_net.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
@@ -8,7 +8,7 @@
#include <asm/checksum.h>
-@@ -571,7 +572,8 @@ static int
+@@ -553,7 +554,8 @@ static int
ltq_etop_mdio_init(struct net_device *dev)
{
struct ltq_etop_priv *priv = netdev_priv(dev);
@@ -18,7 +18,7 @@
priv->mii_bus = mdiobus_alloc();
if (!priv->mii_bus) {
-@@ -591,7 +593,15 @@ ltq_etop_mdio_init(struct net_device *de
+@@ -573,7 +575,15 @@ ltq_etop_mdio_init(struct net_device *de
priv->mii_bus->name = "ltq_mii";
snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
priv->pdev->name, priv->pdev->id);
diff --git a/target/linux/lantiq/xrx200/config-5.4 b/target/linux/lantiq/xrx200/config-5.4
index 0c14f3dadc..cad6ebf1ae 100644
--- a/target/linux/lantiq/xrx200/config-5.4
+++ b/target/linux/lantiq/xrx200/config-5.4
@@ -10,12 +10,15 @@ CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_ZSTD=y
CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin"
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HWMON=y
CONFIG_ICPLUS_PHY=y
CONFIG_IFX_VPE_EXT=y
@@ -24,7 +27,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INTEL_XWAY_PHY=y
# CONFIG_ISDN is not set
-CONFIG_LANTIQ_XRX200=y
+CONFIG_LANTIQ_XRX200_LEGACY=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
@@ -38,11 +41,11 @@ CONFIG_MIPS_VPE_APSP_API_MT=y
CONFIG_MIPS_VPE_LOADER=y
CONFIG_MIPS_VPE_LOADER_MT=y
CONFIG_MIPS_VPE_LOADER_TOM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_XWAY=y
-# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
@@ -59,8 +62,10 @@ CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_LANTIQ=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LANTIQ=y
+CONFIG_PHY_LANTIQ_VRX200_PCIE=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_HWMON=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_RCU_NEED_SEGCBLIST=y
@@ -87,11 +92,15 @@ CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UBIFS_FS_ZSTD=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
CONFIG_XPS=y
CONFIG_XRX200_PHY_FW=y
+CONFIG_XXHASH=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/lantiq/xway/config-5.4 b/target/linux/lantiq/xway/config-5.4
index 6075cec522..7c539ba2ca 100644
--- a/target/linux/lantiq/xway/config-5.4
+++ b/target/linux/lantiq/xway/config-5.4
@@ -5,7 +5,10 @@ CONFIG_BLK_MQ_PCI=y
CONFIG_CRC16=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INPUT=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_POLLDEV=y
@@ -13,11 +16,10 @@ CONFIG_INPUT_POLLDEV=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
CONFIG_MTD_NAND_XWAY=y
-# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
@@ -35,13 +37,18 @@ CONFIG_RTL8306_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8367B_PHY=y
CONFIG_RTL8367_PHY=y
+CONFIG_SGL_ALLOC=y
CONFIG_UBIFS_FS=y
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UBIFS_FS_ZSTD=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
+CONFIG_XXHASH=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/lantiq/xway_legacy/config-5.4 b/target/linux/lantiq/xway_legacy/config-5.4
index c4042f147f..63452a7487 100644
--- a/target/linux/lantiq/xway_legacy/config-5.4
+++ b/target/linux/lantiq/xway_legacy/config-5.4
@@ -5,6 +5,7 @@ CONFIG_CRC16=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
+CONFIG_GENERIC_ALLOCATOR=y
# CONFIG_GPIO_SYSFS is not set
# CONFIG_HW_RANDOM is not set
CONFIG_INPUT=y
@@ -15,7 +16,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_NLS=y
CONFIG_PCI=y
# CONFIG_PCIE_LANTIQ is not set
@@ -27,6 +27,7 @@ CONFIG_RTL8306_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8367B_PHY=y
CONFIG_RTL8367_PHY=y
+CONFIG_SGL_ALLOC=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set