1 files changed, 0 insertions, 115 deletions
diff --git a/target/linux/ramips/dts/Y1S.dts b/target/linux/ramips/dts/Y1S.dts
deleted file mode 100644
index 6cdf0b5cdc..0000000000
--- a/target/linux/ramips/dts/Y1S.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/dts-v1/;
-
-#include "Y1.dtsi"
-
-/ {
-	compatible = "lenovo,newifi-y1s", "lenovo,newifi-y1", "ralink,mt7620a-soc";
-	model = "Lenovo Y1S";
-
-	aliases {
-		led-boot = &led_power_blue;
-		led-failsafe = &led_power_blue;
-		led-running = &led_power_blue;
-		led-upgrade = &led_power_blue;
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-
-		usb0 {
-			gpio-export,name = "usb0";
-			gpio-export,output = <1>;
-			gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
-		};
-		usb1 {
-			gpio-export,name = "usb1";
-			gpio-export,output = <1>;
-			gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
-		};
-		usb2 {
-			gpio-export,name = "usb2";
-			gpio-export,output = <1>;
-			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power1 {
-			label = "y1s:yellow:power";
-			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
-		};
-
-		led_power_blue: power2 {
-			label = "y1s:blue:power";
-			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan1 {
-			label = "y1s:yellow:wifi";
-			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2 {
-			label = "y1s:blue:wifi";
-			gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
-		};
-
-		usb1 {
-			label = "y1s:yellow:usb";
-			gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
-		};
-
-		usb2 {
-			label = "y1s:blue:usb";
-			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&ohci_port1>, <&ehci_port1>;
-			linux,default-trigger = "usbport";
-		};
-
-		internet {
-			label = "y1s:blue:internet";
-			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&ethernet {
-	status = "okay";
-	mtd-mac-address = <&factory 0x4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
-	mediatek,portmap = "wllll";
-
-	port@4 {
-		status = "okay";
-		phy-handle = <&phy4>;
-		phy-mode = "rgmii";
-	};
-
-	port@5 {
-		status = "okay";
-		phy-handle = <&phy5>;
-		phy-mode = "rgmii";
-	};
-
-	mdio-bus {
-		status = "okay";
-
-		phy4: ethernet-phy@4 {
-			reg = <4>;
-			phy-mode = "rgmii";
-		};
-
-		phy5: ethernet-phy@5 {
-			reg = <5>;
-			phy-mode = "rgmii";
-		};
-	};
-};
-
-&gsw {
-	mediatek,port4 = "gmac";
-};