diff options
Diffstat (limited to 'target/linux/ramips/dts/mt7621_xiaomi_mi-router-3-pro.dts')
-rw-r--r-- | target/linux/ramips/dts/mt7621_xiaomi_mi-router-3-pro.dts | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3-pro.dts b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3-pro.dts new file mode 100644 index 0000000000..b9101b7ccb --- /dev/null +++ b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-3-pro.dts @@ -0,0 +1,212 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "xiaomi,mi-router-3-pro", "mediatek,mt7621-soc"; + model = "Xiaomi Mi Router 3 Pro"; + + aliases { + led-boot = &led_status_yellow; + led-failsafe = &led_status_red; + led-running = &led_status_blue; + led-upgrade = &led_status_yellow; + label-mac-device = &gmac0; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: status_red { + label = "red:status"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: status_blue { + label = "blue:status"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + + led_status_yellow: status_yellow { + label = "yellow:status"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + + wan_amber { + label = "amber:wan"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "dsa-0.0:04:1Gbps"; + }; + + lan3_amber { + label = "amber:lan3"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "dsa-0.0:01:1Gbps"; + }; + + lan2_amber { + label = "amber:lan2"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + linux,default-trigger = "dsa-0.0:02:1Gbps"; + }; + + lan1_amber { + label = "amber:lan1"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "dsa-0.0:03:1Gbps"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + reg_usb_vbus: regulator { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&xhci { + vbus-supply = <®_usb_vbus>; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Config"; + reg = <0x40000 0x40000>; + }; + + partition@80000 { + label = "Bdata"; + reg = <0x80000 0x40000>; + read-only; + }; + + factory: partition@c0000 { + label = "factory"; + reg = <0x0c0000 0x40000>; + read-only; + }; + + partition@100000 { + label = "crash"; + reg = <0x100000 0x40000>; + }; + + partition@140000 { + label = "crash_syslog"; + reg = <0x140000 0x80000>; + }; + + partition@1c0000 { + label = "reserved0"; + reg = <0x1c0000 0x40000>; + read-only; + }; + + /* We keep stock xiaomi firmware (kernel0) here */ + partition@200000 { + label = "kernel_stock"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "kernel"; + reg = <0x600000 0x400000>; + }; + + partition@a00000 { + label = "ubi"; + reg = <0xa00000 0xf580000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&gmac0 { + mtd-mac-address = <&factory 0xe006>; +}; + +&switch0 { + ports { + port@1 { + status = "okay"; + label = "lan3"; + }; + + port@2 { + status = "okay"; + label = "lan2"; + }; + + port@3 { + status = "okay"; + label = "lan1"; + }; + + port@4 { + status = "okay"; + label = "wan"; + mtd-mac-address = <&factory 0xe000>; + }; + }; +}; + +&state_default { + gpio { + groups = "jtag", "uart2", "uart3", "wdt"; + function = "gpio"; + }; +}; |