diff options
Diffstat (limited to 'target/linux/ramips/dts')
3 files changed, 170 insertions, 156 deletions
diff --git a/target/linux/ramips/dts/mt7621_xiaomi_mi-router-4a-3g-v2.dtsi b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-4a-3g-v2.dtsi new file mode 100644 index 0000000000..65b299e425 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-4a-3g-v2.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + led-boot = &led_status_yellow; + led-failsafe = &led_status_yellow; + led-running = &led_status_blue; + led-upgrade = &led_status_yellow; + label-mac-device = &wan; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led_status_blue: status_blue { + label = "blue:status"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + + led_status_yellow: status_yellow { + label = "yellow:status"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@40000 { + label = "Bdata"; + reg = <0x40000 0x10000>; + read-only; + }; + + factory: partition@50000 { + label = "factory"; + reg = <0x50000 0x10000>; + read-only; + }; + + partition@60000 { + label = "crash"; + reg = <0x60000 0x10000>; + read-only; + }; + + partition@70000 { + label = "cfg_bak"; + reg = <0x70000 0x10000>; + read-only; + }; + + partition@80000 { + label = "overlay"; + reg = <0x80000 0x100000>; + read-only; + }; + + firmware: partition@180000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x180000 0xe80000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "pci14c3,7662"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "pci14c3,7603"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + }; +}; + +&gmac0 { + mtd-mac-address = <&factory 0xe000>; +}; + +&switch0 { + ports { + port@2 { + status = "okay"; + label = "lan2"; + }; + + port@3 { + status = "okay"; + label = "lan1"; + }; + + wan: port@4 { + status = "okay"; + label = "wan"; + mtd-mac-address = <&factory 0xe006>; + }; + }; +}; + +&state_default { + gpio { + groups = "jtag", "uart2", "uart3", "wdt"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/dts/mt7621_xiaomi_mi-router-4a-gigabit.dts b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-4a-gigabit.dts new file mode 100644 index 0000000000..4387d3b79f --- /dev/null +++ b/target/linux/ramips/dts/mt7621_xiaomi_mi-router-4a-gigabit.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_xiaomi_mi-router-4a-3g-v2.dtsi" + +/ { + compatible = "xiaomi,mi-router-4a-gigabit", "mediatek,mt7621-soc"; + model = "Xiaomi Mi Router 4A Gigabit Edition"; +}; diff --git a/target/linux/ramips/dts/mt7621_xiaomi_mir3g-v2.dts b/target/linux/ramips/dts/mt7621_xiaomi_mir3g-v2.dts index 3df6931bd4..50c5a7dafb 100644 --- a/target/linux/ramips/dts/mt7621_xiaomi_mir3g-v2.dts +++ b/target/linux/ramips/dts/mt7621_xiaomi_mir3g-v2.dts @@ -1,163 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "mt7621.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "mt7621_xiaomi_mi-router-4a-3g-v2.dtsi" / { compatible = "xiaomi,mir3g-v2", "mediatek,mt7621-soc"; model = "Xiaomi Mi Router 3G v2"; - - aliases { - led-boot = &led_status_yellow; - led-failsafe = &led_status_yellow; - led-running = &led_status_blue; - led-upgrade = &led_status_yellow; - label-mac-device = &wan; - }; - - chosen { - bootargs = "console=ttyS0,115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - led_status_blue: status_blue { - label = "blue:status"; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - - led_status_yellow: status_yellow { - label = "yellow:status"; - gpios = <&gpio 10 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <80000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - partition@40000 { - label = "Bdata"; - reg = <0x40000 0x10000>; - read-only; - }; - - factory: partition@50000 { - label = "factory"; - reg = <0x50000 0x10000>; - read-only; - }; - - partition@60000 { - label = "crash"; - reg = <0x60000 0x10000>; - read-only; - }; - - partition@70000 { - label = "cfg_bak"; - reg = <0x70000 0x10000>; - read-only; - }; - - partition@80000 { - label = "overlay"; - reg = <0x80000 0x100000>; - read-only; - }; - - firmware: partition@180000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x180000 0xe80000>; - }; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "pci14c3,7662"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - }; -}; - -&pcie1 { - wifi@0,0 { - compatible = "pci14c3,7603"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x0000>; - ieee80211-freq-limit = <2400000 2500000>; - }; -}; - -&gmac0 { - mtd-mac-address = <&factory 0xe000>; -}; - -&switch0 { - ports { - port@2 { - status = "okay"; - label = "lan2"; - }; - - port@3 { - status = "okay"; - label = "lan1"; - }; - wan: port@4 { - status = "okay"; - label = "wan"; - mtd-mac-address = <&factory 0xe006>; - }; - }; -}; - -&state_default { - gpio { - groups = "jtag", "uart2", "uart3", "wdt"; - function = "gpio"; - }; }; |