diff options
Diffstat (limited to 'target/linux/ramips/files')
11 files changed, 0 insertions, 4853 deletions
diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c b/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c deleted file mode 100644 index 4e9c0d7a8d..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c +++ /dev/null @@ -1,445 +0,0 @@ -#include "mtk-phy.h" - -#ifdef CONFIG_PROJECT_7621 -#include "mtk-phy-7621.h" - -//not used on SoC -PHY_INT32 phy_init(struct u3phy_info *info){ - return PHY_TRUE; -} - -//not used on SoC -PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){ - return PHY_TRUE; -} - -//-------------------------------------------------------- -// Function : fgEyeScanHelper_CheckPtInRegion() -// Description : Check if the test point is in a rectangle region. -// If it is in the rectangle, also check if this point -// is on the multiple of deltaX and deltaY. -// Parameter : strucScanRegion * prEye - the region -// BYTE bX -// BYTE bY -// Return : BYTE - TRUE : This point needs to be tested -// FALSE: This point will be omitted -// Note : First check within the rectangle. -// Secondly, use modulous to check if the point will be tested. -//-------------------------------------------------------- -static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY) -{ - PHY_INT8 fgValid = true; - - - /// Be careful, the axis origin is on the TOP-LEFT corner. - /// Therefore the top-left point has the minimum X and Y - /// Botton-right point is the maximum X and Y - if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br) - && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br)) - { - // With the region, now check whether or not the input test point is - // on the multiples of X and Y - // Do not have to worry about negative value, because we have already - // check the input bX, and bY is within the region. - if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX)) - || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) ) - { - // if the division will have remainder, that means - // the input test point is on the multiples of X and Y - fgValid = false; - } - else - { - } - } - else - { - - fgValid = false; - } - return fgValid; -} - -//-------------------------------------------------------- -// Function : EyeScanHelper_RunTest() -// Description : Enable the test, and wait til it is completed -// Parameter : None -// Return : None -// Note : None -//-------------------------------------------------------- -static void EyeScanHelper_RunTest(struct u3phy_info *info) -{ - DRV_UDELAY(100); - // Disable the test - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0 - DRV_UDELAY(100); - // Run the test - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1 - DRV_UDELAY(100); - // Wait til it's done - //RGS_SSUSB_RX_EYE_CNT_RDY - while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) - , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY)); -} - -//-------------------------------------------------------- -// Function : fgEyeScanHelper_CalNextPoint() -// Description : Calcualte the test point for the measurement -// Parameter : None -// Return : BOOL - TRUE : the next point is within the -// boundaryof HW limit -// FALSE: the next point is out of the HW limit -// Note : The next point is obtained by calculating -// from the bottom left of the region rectangle -// and then scanning up until it reaches the upper -// limit. At this time, the x will increment, and -// start scanning downwards until the y hits the -// zero. -//-------------------------------------------------------- -static PHY_INT8 fgEyeScanHelper_CalNextPoint(void) -{ - if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN)) - || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP)) - ) - { - /// Reaches the limit of Y axis - /// Increment X - _bXcurr++; - _fgXChged = true; - _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP; - - if (_bXcurr > MAX_X) - { - return false; - } - } - else - { - _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1; - _fgXChged = false; - } - return PHY_TRUE; -} - -PHY_INT32 eyescan_init(struct u3phy_info *info){ - //initial PHY setting - U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega) - , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1); - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3) - , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1); - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 - return PHY_TRUE; -} - -PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y - , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){ - PHY_INT32 cOfst = 0; - PHY_UINT8 bIdxX = 0; - PHY_UINT8 bIdxY = 0; - //PHY_INT8 bCnt = 0; - PHY_UINT8 bIdxCycCnt = 0; - PHY_INT8 fgValid; - PHY_INT8 cX; - PHY_INT8 cY; - PHY_UINT8 bExtendCnt; - PHY_INT8 isContinue; - //PHY_INT8 isBreak; - PHY_UINT32 wErr0 = 0, wErr1 = 0; - //PHY_UINT32 temp; - - PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; - PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; - - _rEye1.bX_tl = x_t1; - _rEye1.bY_tl = y_t1; - _rEye1.bX_br = x_br; - _rEye1.bY_br = y_br; - _rEye1.bDeltaX = delta_x; - _rEye1.bDeltaY = delta_y; - - _rEye2.bX_tl = x_t1; - _rEye2.bY_tl = y_t1; - _rEye2.bX_br = x_br; - _rEye2.bY_br = y_br; - _rEye2.bDeltaX = delta_x; - _rEye2.bDeltaY = delta_y; - - _rTestCycle.wEyeCnt = eye_cnt; - _rTestCycle.bNumOfEyeCnt = num_cnt; - _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt; - _rTestCycle.bPICalEn = PI_cal_en; - - _bXcurr = 0; - _bYcurr = 0; - _eScanDir = SCAN_DN; - _fgXChged = false; - - printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \ - eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \ - x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt); - - //force SIGDET to OFF - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) - , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0 - - // RX_TRI_DET_EN to Disable - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3) - , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0 - - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0 - - - if (PI_cal_en){ - // PI Calibration - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 - - DRV_UDELAY(20); - - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 - _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) - , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO - - printk(KERN_ERR "PI result: %d\n", _bPIResult); - } - // Read Initial DAC - // Set CYCLE - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3) - ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT - - // Eye Monitor Feature - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) - , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 - - // Move X,Y to the top-left corner - for (cOfst = 0; cOfst >= -64; cOfst--) - { - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET - } - for (cOfst = 0; cOfst < 64; cOfst++) - { - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y - } - //ClearErrorResult - for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){ - for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++) - { - for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){ - pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0; - pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0; - } - } - } - isContinue = true; - while(isContinue){ - //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr); - // The point is within the boundary, then let's check if it is within - // the testing region. - // The point is only test-able if one of the eye region - // includes this point. - fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr) - || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr); - // Translate bX and bY to 2's complement from where the origin was on the - // top left corner. - // 0x40 and 0x3F needs a bit of thinking!!!! >"< - cX = (_bXcurr ^ 0x40); - cY = (_bYcurr ^ 0x3F); - - // Set X if necessary - if (_fgXChged == true) - { - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET - } - // Set Y - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y - - /// Test this point! - if (fgValid){ - for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++) - { - //run test - EyeScanHelper_RunTest(info); - } - for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++) - { - EyeScanHelper_RunTest(info); - wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3) - , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0); - wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4) - , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1); - - pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0; - pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1; - - //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]); -// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n" -// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]); - } - //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]); - } - else{ - - } - if (fgEyeScanHelper_CalNextPoint() == false){ -#if 0 - printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr); - printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY); -#endif - printk(KERN_ERR "end of eye scan\n"); - isContinue = false; - } - } - printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" - , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) - , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); - - // Move X,Y to the top-left corner - for (cOfst = 63; cOfst >= 0; cOfst--) - { - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET - } - for (cOfst = 63; cOfst >= 0; cOfst--) - { - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); - - } - printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" - , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) - , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); - - printk(KERN_ERR "PI result: %d\n", _bPIResult); - printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0); - printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1); - - return PHY_TRUE; -} - -//not used on SoC -PHY_INT32 u2_save_cur_en(struct u3phy_info *info){ - return PHY_TRUE; -} - -//not used on SoC -PHY_INT32 u2_save_cur_re(struct u3phy_info *info){ - return PHY_TRUE; -} - -PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){ - PHY_INT32 i=0; - //PHY_INT32 j=0; - //PHY_INT8 u1SrCalVal = 0; - //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN; - PHY_INT32 fgRet = 0; - PHY_INT32 u4FmOut = 0; - PHY_INT32 u4Tmp = 0; - //PHY_INT32 temp; - - // => RG_USB20_HSTX_SRCAL_EN = 1 - // enable HS TX SR calibration - U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) - , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1); - DRV_MSLEEP(1); - - // => RG_FRCK_EN = 1 - // Enable free run clock - U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) - , RG_FRCK_EN_OFST, RG_FRCK_EN, 1); - - // MT6290 HS signal quality patch - // => RG_CYCLECNT = 400 - // Setting cyclecnt =400 - U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) - , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400); - - // => RG_FREQDET_EN = 1 - // Enable frequency meter - U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) - , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1); - - // wait for FM detection done, set 10ms timeout - for(i=0; i<10; i++){ - // => u4FmOut = USB_FM_OUT - // read FM_OUT - u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0)); - printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut); - - // check if FM detection done - if (u4FmOut != 0) - { - fgRet = 0; - printk("FM detection done! loop = %d\n", i); - - break; - } - - fgRet = 1; - DRV_MSLEEP(1); - } - // => RG_FREQDET_EN = 0 - // disable frequency meter - U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) - , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0); - - // => RG_FRCK_EN = 0 - // disable free run clock - U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) - , RG_FRCK_EN_OFST, RG_FRCK_EN, 0); - - // => RG_USB20_HSTX_SRCAL_EN = 0 - // disable HS TX SR calibration - U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) - , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0); - DRV_MSLEEP(1); - - if(u4FmOut == 0){ - U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) - , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4); - - fgRet = 1; - } - else{ - // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits) - u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000; - printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp); - U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) - , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp); - } - return fgRet; -} - -#endif diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.h b/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.h deleted file mode 100644 index 41b0c7744b..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.h +++ /dev/null @@ -1,2871 +0,0 @@ -#ifdef CONFIG_PROJECT_7621 -#ifndef __MTK_PHY_7621_H -#define __MTK_PHY_7621_H - -#define U2_SR_COEF_7621 28 - -/////////////////////////////////////////////////////////////////////////////// - -struct u2phy_reg { - //0x0 - PHY_LE32 u2phyac0; - PHY_LE32 u2phyac1; - PHY_LE32 u2phyac2; - PHY_LE32 reserve0; - //0x10 - PHY_LE32 u2phyacr0; - PHY_LE32 u2phyacr1; - PHY_LE32 u2phyacr2; - PHY_LE32 u2phyacr3; - //0x20 - PHY_LE32 u2phyacr4; - PHY_LE32 u2phyamon0; - PHY_LE32 reserve1[2]; - //0x30~0x50 - PHY_LE32 reserve2[12]; - //0x60 - PHY_LE32 u2phydcr0; - PHY_LE32 u2phydcr1; - PHY_LE32 u2phydtm0; - PHY_LE32 u2phydtm1; - //0x70 - PHY_LE32 u2phydmon0; - PHY_LE32 u2phydmon1; - PHY_LE32 u2phydmon2; - PHY_LE32 u2phydmon3; - //0x80 - PHY_LE32 u2phybc12c; - PHY_LE32 u2phybc12c1; - PHY_LE32 reserve3[2]; - //0x90~0xe0 - PHY_LE32 reserve4[24]; - //0xf0 - PHY_LE32 reserve6[3]; - PHY_LE32 regfcom; -}; - -//U3D_U2PHYAC0 -#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28 -#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26 -#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24 -#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23 -#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16 -#define RG_USB20_REF_EN (0x1<<15) //15:15 -#define RG_USB20_INTR_EN (0x1<<14) //14:14 -#define RG_USB20_BG_TRIM (0xf<<8) //11:8 -#define RG_USB20_BG_RBSEL (0x3<<6) //7:6 -#define RG_USB20_BG_RASEL (0x3<<4) //5:4 -#define RG_USB20_BGR_DIV (0x3<<2) //3:2 -#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1 -#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0 - -//U3D_U2PHYAC1 -#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28 -#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24 -#define RG_USB20_MPX_SEL (0xff<<16) //23:16 -#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12 -#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8 -#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3 -#define RG_USB20_USBPLL_LF (0x1<<2) //2:2 -#define RG_USB20_USBPLL_BR (0x1<<1) //1:1 -#define RG_USB20_USBPLL_BP (0x1<<0) //0:0 - -//U3D_U2PHYAC2 -#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17 -#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16 -#define RG_USB20_CLKREF_REV (0xff<<0) //7:0 - -//U3D_U2PHYACR0 -#define RG_USB20_ICUSB_EN (0x1<<24) //24:24 -#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23 -#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16 -#define RG_USB20_LS_CR (0x7<<12) //14:12 -#define RG_USB20_FS_CR (0x7<<8) //10:8 -#define RG_USB20_LS_SR (0x7<<4) //6:4 -#define RG_USB20_FS_SR (0x7<<0) //2:0 - -//U3D_U2PHYACR1 -#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28 -#define RG_USB20_SQD (0x3<<24) //25:24 -#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20 -#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19 -#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18 -#define RG_USB20_INLPBK_EN (0x1<<17) //17:17 -#define RG_USB20_CHIRP_EN (0x1<<16) //16:16 -#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15 -#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8 -#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7 -#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0 - -//U3D_U2PHYACR2 -#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29 -#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28 -#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27 -#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24 -#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22 -#define RG_USB20_DISCD (0x3<<20) //21:20 -#define RG_USB20_DISCTH (0xf<<16) //19:16 -#define RG_USB20_SQCAL_EN (0x1<<15) //15:15 -#define RG_USB20_SQCAL (0xf<<8) //11:8 -#define RG_USB20_SQTH (0xf<<0) //3:0 - -//U3D_U2PHYACR3 -#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28 -#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26 -#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24 -#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23 -#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20 -#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19 -#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18 -#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17 -#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16 -#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13 -#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12 -#define RG_USB20_EN_PU_DM (0x1<<11) //11:11 -#define RG_USB20_EN_PD_DM (0x1<<10) //10:10 -#define RG_USB20_EN_PU_DP (0x1<<9) //9:9 -#define RG_USB20_EN_PD_DP (0x1<<8) //8:8 -#define RG_USB20_PHY_REV (0xff<<0) //7:0 - -//U3D_U2PHYACR4 -#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18 -#define RG_USB20_DM_100K_EN (0x1<<17) //17:17 -#define USB20_DP_100K_EN (0x1<<16) //16:16 -#define USB20_GPIO_DM_I (0x1<<15) //15:15 -#define USB20_GPIO_DP_I (0x1<<14) //14:14 -#define USB20_GPIO_DM_OE (0x1<<13) //13:13 -#define USB20_GPIO_DP_OE (0x1<<12) //12:12 -#define RG_USB20_GPIO_CTL (0x1<<9) //9:9 -#define USB20_GPIO_MODE (0x1<<8) //8:8 -#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5 -#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4 -#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2 -#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0 - -//U3D_U2PHYAMON0 -#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1 -#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0 - -//U3D_U2PHYDCR0 -#define RG_USB20_CDR_TST (0x3<<30) //31:30 -#define RG_USB20_GATED_ENB (0x1<<29) //29:29 -#define RG_USB20_TESTMODE (0x3<<26) //27:26 -#define RG_USB20_PLL_STABLE (0x1<<25) //25:25 -#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24 -#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8 -#define RG_USB20_EBTHRLD (0x1<<7) //7:7 -#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6 -#define RG_USB20_TX_TST (0x1<<5) //5:5 -#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4 -#define RG_USB20_CDR_FILT (0xf<<0) //3:0 - -//U3D_U2PHYDCR1 -#define RG_USB20_PROBE_SEL (0xff<<24) //31:24 -#define RG_USB20_DRVVBUS (0x1<<23) //23:23 -#define RG_DEBUG_EN (0x1<<22) //22:22 -#define RG_USB20_OTG_PROBE (0x3<<20) //21:20 -#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18 -#define RG_USB20_BERTH (0x3<<16) //17:16 -#define RG_USB20_LBMODE (0x3<<13) //14:13 -#define RG_USB20_FORCE_TAP (0x1<<12) //12:12 -#define RG_USB20_TAPSEL (0xfff<<0) //11:0 - -//U3D_U2PHYDTM0 -#define RG_UART_MODE (0x3<<30) //31:30 -#define FORCE_UART_I (0x1<<29) //29:29 -#define FORCE_UART_BIAS_EN (0x1<<28) //28:28 -#define FORCE_UART_TX_OE (0x1<<27) //27:27 -#define FORCE_UART_EN (0x1<<26) //26:26 -#define FORCE_USB_CLKEN (0x1<<25) //25:25 -#define FORCE_DRVVBUS (0x1<<24) //24:24 -#define FORCE_DATAIN (0x1<<23) //23:23 -#define FORCE_TXVALID (0x1<<22) //22:22 -#define FORCE_DM_PULLDOWN (0x1<<21) //21:21 -#define FORCE_DP_PULLDOWN (0x1<<20) //20:20 -#define FORCE_XCVRSEL (0x1<<19) //19:19 -#define FORCE_SUSPENDM (0x1<<18) //18:18 -#define FORCE_TERMSEL (0x1<<17) //17:17 -#define FORCE_OPMODE (0x1<<16) //16:16 -#define UTMI_MUXSEL (0x1<<15) //15:15 -#define RG_RESET (0x1<<14) //14:14 -#define RG_DATAIN (0xf<<10) //13:10 -#define RG_TXVALIDH (0x1<<9) //9:9 -#define RG_TXVALID (0x1<<8) //8:8 -#define RG_DMPULLDOWN (0x1<<7) //7:7 -#define RG_DPPULLDOWN (0x1<<6) //6:6 -#define RG_XCVRSEL (0x3<<4) //5:4 -#define RG_SUSPENDM (0x1<<3) //3:3 -#define RG_TERMSEL (0x1<<2) //2:2 -#define RG_OPMODE (0x3<<0) //1:0 - -//U3D_U2PHYDTM1 -#define RG_USB20_PRBS7_EN (0x1<<31) //31:31 -#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24 -#define RG_USB20_CLK48M_EN (0x1<<23) //23:23 -#define RG_USB20_CLK60M_EN (0x1<<22) //22:22 -#define RG_UART_I (0x1<<19) //19:19 -#define RG_UART_BIAS_EN (0x1<<18) //18:18 -#define RG_UART_TX_OE (0x1<<17) //17:17 -#define RG_UART_EN (0x1<<16) //16:16 -#define FORCE_VBUSVALID (0x1<<13) //13:13 -#define FORCE_SESSEND (0x1<<12) //12:12 -#define FORCE_BVALID (0x1<<11) //11:11 -#define FORCE_AVALID (0x1<<10) //10:10 -#define FORCE_IDDIG (0x1<<9) //9:9 -#define FORCE_IDPULLUP (0x1<<8) //8:8 -#define RG_VBUSVALID (0x1<<5) //5:5 -#define RG_SESSEND (0x1<<4) //4:4 -#define RG_BVALID (0x1<<3) //3:3 -#define RG_AVALID (0x1<<2) //2:2 -#define RG_IDDIG (0x1<<1) //1:1 -#define RG_IDPULLUP (0x1<<0) //0:0 - -//U3D_U2PHYDMON0 -#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0 - -//U3D_U2PHYDMON1 -#define USB20_UART_O (0x1<<31) //31:31 -#define RGO_USB20_LB_PASS (0x1<<30) //30:30 -#define RGO_USB20_LB_DONE (0x1<<29) //29:29 -#define AD_USB20_BVALID (0x1<<28) //28:28 -#define USB20_IDDIG (0x1<<27) //27:27 -#define AD_USB20_VBUSVALID (0x1<<26) //26:26 -#define AD_USB20_SESSEND (0x1<<25) //25:25 -#define AD_USB20_AVALID (0x1<<24) //24:24 -#define USB20_LINE_STATE (0x3<<22) //23:22 -#define USB20_HST_DISCON (0x1<<21) //21:21 -#define USB20_TX_READY (0x1<<20) //20:20 -#define USB20_RX_ERROR (0x1<<19) //19:19 -#define USB20_RX_ACTIVE (0x1<<18) //18:18 -#define USB20_RX_VALIDH (0x1<<17) //17:17 -#define USB20_RX_VALID (0x1<<16) //16:16 -#define USB20_DATA_OUT (0xffff<<0) //15:0 - -//U3D_U2PHYDMON2 -#define RGO_TXVALID_CNT (0xff<<24) //31:24 -#define RGO_RXACTIVE_CNT (0xff<<16) //23:16 -#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8 -#define USB20_PROBE_OUT (0xff<<0) //7:0 - -//U3D_U2PHYDMON3 -#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16 -#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3 -#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2 -#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1 -#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0 - -//U3D_U2PHYBC12C -#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28 -#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24 -#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16 -#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14 -#define RG_CHGDT_VDATSRC (0x1<<13) //13:13 -#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10 -#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8 -#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7 -#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6 -#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5 -#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4 -#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3 -#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2 -#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1 -#define RG_CHGDT_EN (0x1<<0) //0:0 - -//U3D_U2PHYBC12C1 -#define RG_CHGDT_REV (0xff<<0) //7:0 - -//U3D_REGFCOM -#define RG_PAGE (0xff<<24) //31:24 -#define I2C_MODE (0x1<<16) //16:16 - - -/* OFFSET */ - -//U3D_U2PHYAC0 -#define RG_USB20_USBPLL_DIVEN_OFST (28) -#define RG_USB20_USBPLL_CKCTRL_OFST (26) -#define RG_USB20_USBPLL_PREDIV_OFST (24) -#define RG_USB20_USBPLL_FORCE_ON_OFST (23) -#define RG_USB20_USBPLL_FBDIV_OFST (16) -#define RG_USB20_REF_EN_OFST (15) -#define RG_USB20_INTR_EN_OFST (14) -#define RG_USB20_BG_TRIM_OFST (8) -#define RG_USB20_BG_RBSEL_OFST (6) -#define RG_USB20_BG_RASEL_OFST (4) -#define RG_USB20_BGR_DIV_OFST (2) -#define RG_SIFSLV_CHP_EN_OFST (1) -#define RG_SIFSLV_BGR_EN_OFST (0) - -//U3D_U2PHYAC1 -#define RG_USB20_VRT_VREF_SEL_OFST (28) -#define RG_USB20_TERM_VREF_SEL_OFST (24) -#define RG_USB20_MPX_SEL_OFST (16) -#define RG_USB20_MPX_OUT_SEL_OFST (12) -#define RG_USB20_TX_PH_ROT_SEL_OFST (8) -#define RG_USB20_USBPLL_ACCEN_OFST (3) -#define RG_USB20_USBPLL_LF_OFST (2) -#define RG_USB20_USBPLL_BR_OFST (1) -#define RG_USB20_USBPLL_BP_OFST (0) - -//U3D_U2PHYAC2 -#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17) -#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16) -#define RG_USB20_CLKREF_REV_OFST (0) - -//U3D_U2PHYACR0 -#define RG_USB20_ICUSB_EN_OFST (24) -#define RG_USB20_HSTX_SRCAL_EN_OFST (23) -#define RG_USB20_HSTX_SRCTRL_OFST (16) -#define RG_USB20_LS_CR_OFST (12) -#define RG_USB20_FS_CR_OFST (8) -#define RG_USB20_LS_SR_OFST (4) -#define RG_USB20_FS_SR_OFST (0) - -//U3D_U2PHYACR1 -#define RG_USB20_INIT_SQ_EN_DG_OFST (28) -#define RG_USB20_SQD_OFST (24) -#define RG_USB20_HSTX_TMODE_SEL_OFST (20) -#define RG_USB20_HSTX_TMODE_EN_OFST (19) -#define RG_USB20_PHYD_MONEN_OFST (18) -#define RG_USB20_INLPBK_EN_OFST (17) -#define RG_USB20_CHIRP_EN_OFST (16) -#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15) -#define RG_USB20_DM_ABIST_SELE_OFST (8) -#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7) -#define RG_USB20_DP_ABIST_SELE_OFST (0) - -//U3D_U2PHYACR2 -#define RG_USB20_OTG_ABIST_SELE_OFST (29) -#define RG_USB20_OTG_ABIST_EN_OFST (28) -#define RG_USB20_OTG_VBUSCMP_EN_OFST (27) -#define RG_USB20_OTG_VBUSTH_OFST (24) -#define RG_USB20_DISC_FIT_EN_OFST (22) -#define RG_USB20_DISCD_OFST (20) -#define RG_USB20_DISCTH_OFST (16) -#define RG_USB20_SQCAL_EN_OFST (15) -#define RG_USB20_SQCAL_OFST (8) -#define RG_USB20_SQTH_OFST (0) - -//U3D_U2PHYACR3 -#define RG_USB20_HSTX_DBIST_OFST (28) -#define RG_USB20_HSTX_BIST_EN_OFST (26) -#define RG_USB20_HSTX_I_EN_MODE_OFST (24) -#define RG_USB20_HSRX_TMODE_EN_OFST (23) -#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20) -#define RG_USB20_USB11_TMODE_EN_OFST (19) -#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18) -#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17) -#define RG_USB20_TMODE_FS_LS_MODE_OFST (16) -#define RG_USB20_HS_TERM_EN_MODE_OFST (13) -#define RG_USB20_PUPD_BIST_EN_OFST (12) -#define RG_USB20_EN_PU_DM_OFST (11) -#define RG_USB20_EN_PD_DM_OFST (10) -#define RG_USB20_EN_PU_DP_OFST (9) -#define RG_USB20_EN_PD_DP_OFST (8) -#define RG_USB20_PHY_REV_OFST (0) - -//U3D_U2PHYACR4 -#define RG_USB20_DP_100K_MODE_OFST (18) -#define RG_USB20_DM_100K_EN_OFST (17) -#define USB20_DP_100K_EN_OFST (16) -#define USB20_GPIO_DM_I_OFST (15) -#define USB20_GPIO_DP_I_OFST (14) -#define USB20_GPIO_DM_OE_OFST (13) -#define USB20_GPIO_DP_OE_OFST (12) -#define RG_USB20_GPIO_CTL_OFST (9) -#define USB20_GPIO_MODE_OFST (8) -#define RG_USB20_TX_BIAS_EN_OFST (5) -#define RG_USB20_TX_VCMPDN_EN_OFST (4) -#define RG_USB20_HS_SQ_EN_MODE_OFST (2) -#define RG_USB20_HS_RCV_EN_MODE_OFST (0) - -//U3D_U2PHYAMON0 -#define RGO_USB20_GPIO_DM_O_OFST (1) -#define RGO_USB20_GPIO_DP_O_OFST (0) - -//U3D_U2PHYDCR0 -#define RG_USB20_CDR_TST_OFST (30) -#define RG_USB20_GATED_ENB_OFST (29) -#define RG_USB20_TESTMODE_OFST (26) -#define RG_USB20_PLL_STABLE_OFST (25) -#define RG_USB20_PLL_FORCE_ON_OFST (24) -#define RG_USB20_PHYD_RESERVE_OFST (8) -#define RG_USB20_EBTHRLD_OFST (7) -#define RG_USB20_EARLY_HSTX_I_OFST (6) -#define RG_USB20_TX_TST_OFST (5) -#define RG_USB20_NEGEDGE_ENB_OFST (4) -#define RG_USB20_CDR_FILT_OFST (0) - -//U3D_U2PHYDCR1 -#define RG_USB20_PROBE_SEL_OFST (24) -#define RG_USB20_DRVVBUS_OFST (23) -#define RG_DEBUG_EN_OFST (22) -#define RG_USB20_OTG_PROBE_OFST (20) -#define RG_USB20_SW_PLLMODE_OFST (18) -#define RG_USB20_BERTH_OFST (16) -#define RG_USB20_LBMODE_OFST (13) -#define RG_USB20_FORCE_TAP_OFST (12) -#define RG_USB20_TAPSEL_OFST (0) - -//U3D_U2PHYDTM0 -#define RG_UART_MODE_OFST (30) -#define FORCE_UART_I_OFST (29) -#define FORCE_UART_BIAS_EN_OFST (28) -#define FORCE_UART_TX_OE_OFST (27) -#define FORCE_UART_EN_OFST (26) -#define FORCE_USB_CLKEN_OFST (25) -#define FORCE_DRVVBUS_OFST (24) -#define FORCE_DATAIN_OFST (23) -#define FORCE_TXVALID_OFST (22) -#define FORCE_DM_PULLDOWN_OFST (21) -#define FORCE_DP_PULLDOWN_OFST (20) -#define FORCE_XCVRSEL_OFST (19) -#define FORCE_SUSPENDM_OFST (18) -#define FORCE_TERMSEL_OFST (17) -#define FORCE_OPMODE_OFST (16) -#define UTMI_MUXSEL_OFST (15) -#define RG_RESET_OFST (14) -#define RG_DATAIN_OFST (10) -#define RG_TXVALIDH_OFST (9) -#define RG_TXVALID_OFST (8) -#define RG_DMPULLDOWN_OFST (7) -#define RG_DPPULLDOWN_OFST (6) -#define RG_XCVRSEL_OFST (4) -#define RG_SUSPENDM_OFST (3) -#define RG_TERMSEL_OFST (2) -#define RG_OPMODE_OFST (0) - -//U3D_U2PHYDTM1 -#define RG_USB20_PRBS7_EN_OFST (31) -#define RG_USB20_PRBS7_BITCNT_OFST (24) -#define RG_USB20_CLK48M_EN_OFST (23) -#define RG_USB20_CLK60M_EN_OFST (22) -#define RG_UART_I_OFST (19) -#define RG_UART_BIAS_EN_OFST (18) -#define RG_UART_TX_OE_OFST (17) -#define RG_UART_EN_OFST (16) -#define FORCE_VBUSVALID_OFST (13) -#define FORCE_SESSEND_OFST (12) -#define FORCE_BVALID_OFST (11) -#define FORCE_AVALID_OFST (10) -#define FORCE_IDDIG_OFST (9) -#define FORCE_IDPULLUP_OFST (8) -#define RG_VBUSVALID_OFST (5) -#define RG_SESSEND_OFST (4) -#define RG_BVALID_OFST (3) -#define RG_AVALID_OFST (2) -#define RG_IDDIG_OFST (1) -#define RG_IDPULLUP_OFST (0) - -//U3D_U2PHYDMON0 -#define RG_USB20_PRBS7_BERTH_OFST (0) - -//U3D_U2PHYDMON1 -#define USB20_UART_O_OFST (31) -#define RGO_USB20_LB_PASS_OFST (30) -#define RGO_USB20_LB_DONE_OFST (29) -#define AD_USB20_BVALID_OFST (28) -#define USB20_IDDIG_OFST (27) -#define AD_USB20_VBUSVALID_OFST (26) -#define AD_USB20_SESSEND_OFST (25) -#define AD_USB20_AVALID_OFST (24) -#define USB20_LINE_STATE_OFST (22) -#define USB20_HST_DISCON_OFST (21) -#define USB20_TX_READY_OFST (20) -#define USB20_RX_ERROR_OFST (19) -#define USB20_RX_ACTIVE_OFST (18) -#define USB20_RX_VALIDH_OFST (17) -#define USB20_RX_VALID_OFST (16) -#define USB20_DATA_OUT_OFST (0) - -//U3D_U2PHYDMON2 -#define RGO_TXVALID_CNT_OFST (24) -#define RGO_RXACTIVE_CNT_OFST (16) -#define RGO_USB20_LB_BERCNT_OFST (8) -#define USB20_PROBE_OUT_OFST (0) - -//U3D_U2PHYDMON3 -#define RGO_USB20_PRBS7_ERRCNT_OFST (16) -#define RGO_USB20_PRBS7_DONE_OFST (3) -#define RGO_USB20_PRBS7_LOCK_OFST (2) -#define RGO_USB20_PRBS7_PASS_OFST (1) -#define RGO_USB20_PRBS7_PASSTH_OFST (0) - -//U3D_U2PHYBC12C -#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28) -#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24) -#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16) -#define RG_CHGDT_ISRC_LEV_OFST (14) -#define RG_CHGDT_VDATSRC_OFST (13) -#define RG_CHGDT_BGVREF_SEL_OFST (10) -#define RG_CHGDT_RDVREF_SEL_OFST (8) -#define RG_CHGDT_ISRC_DP_OFST (7) -#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6) -#define RG_CHGDT_VDAT_DM_OFST (5) -#define RG_CHGDT_OPOUT_DP_OFST (4) -#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3) -#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2) -#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1) -#define RG_CHGDT_EN_OFST (0) - -//U3D_U2PHYBC12C1 -#define RG_CHGDT_REV_OFST (0) - -//U3D_REGFCOM -#define RG_PAGE_OFST (24) -#define I2C_MODE_OFST (16) - - -/////////////////////////////////////////////////////////////////////////////// - -struct u3phya_reg { - //0x0 - PHY_LE32 reg0; - PHY_LE32 reg1; - PHY_LE32 reg2; - PHY_LE32 reg3; - //0x10 - PHY_LE32 reg4; - PHY_LE32 reg5; - PHY_LE32 reg6; - PHY_LE32 reg7; - //0x20 - PHY_LE32 reg8; - PHY_LE32 reg9; - PHY_LE32 rega; - PHY_LE32 regb; - //0x30 - PHY_LE32 regc; - PHY_LE32 regd; - PHY_LE32 rege; -}; - -//U3D_reg0 -#define RG_SSUSB_BGR_EN (0x1<<31) //31:31 -#define RG_SSUSB_CHPEN (0x1<<30) //30:30 -#define RG_SSUSB_BG_DIV (0x3<<28) //29:28 -#define RG_SSUSB_INTR_EN (0x1<<26) //26:26 -#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24 -#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16 -#define RG_SSUSB_REF_EN (0x1<<15) //15:15 -#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11 -#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9 -#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7 -#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6 -#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0 - -//U3D_reg1 -#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30 -#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27 -#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26 -#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25 -#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24 -#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8 -#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4 -#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2 -#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0 - -//U3D_reg2 -#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31 -#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24 -#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22 -#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21 -#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20 -#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19 -#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18 -#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17 -#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14 -#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13 -#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12 -#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11 -#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10 -#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9 -#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8 - -//U3D_reg3 -#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16 - -//U3D_reg4 -#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1 - -//U3D_reg5 -#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29 -#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28 -#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27 -#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26 -#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25 -#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24 -#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23 -#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22 -#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21 -#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20 -#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0 - -//U3D_reg6 -#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31 -#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30 -#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24 -#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23 -#define RG_SSUSB_TX_SR (0x7<<20) //22:20 -#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16 -#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14 -#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12 -#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11 -#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8 -#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7 -#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6 -#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5 -#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4 - -//U3D_reg7 -#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12 -#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10 -#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8 -#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7 -#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6 -#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5 -#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4 -#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3 -#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2 -#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1 -#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0 - -//U3D_reg8 -#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0 - -//U3D_reg9 -#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0 - -//U3D_regA -#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31 -#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30 -#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29 -#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28 -#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21 -#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20 -#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17 -#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16 -#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15 -#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14 -#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13 -#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12 -#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11 -#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9 -#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8 -#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6 -#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4 -#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3 -#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2 -#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1 -#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0 - -//U3D_regB -#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31 -#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29 -#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26 -#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25 -#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24 -#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19 -#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18 -#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17 -#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14 -#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12 -#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7 -#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5 -#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3 -#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2 - -//U3D_regC -#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28 -#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16 -#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8 -#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0 - -//U3D_redD -#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8 -#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0 - -//U3D_regE -#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4 -#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3 -#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2 -#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1 -#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0 - - -/* OFFSET */ - -//U3D_reg0 -#define RG_SSUSB_BGR_EN_OFST (31) -#define RG_SSUSB_CHPEN_OFST (30) -#define RG_SSUSB_BG_DIV_OFST (28) -#define RG_SSUSB_INTR_EN_OFST (26) -#define RG_SSUSB_MPX_OUT_SEL_OFST (24) -#define RG_SSUSB_MPX_SEL_OFST (16) -#define RG_SSUSB_REF_EN_OFST (15) -#define RG_SSUSB_VRT_VREF_SEL_OFST (11) -#define RG_SSUSB_BG_RASEL_OFST (9) -#define RG_SSUSB_BG_RBSEL_OFST (7) -#define RG_SSUSB_BG_MONEN_OFST (6) -#define RG_PCIE_CLKDRV_OFFSET_OFST (0) - -//U3D_reg1 -#define RG_PCIE_CLKDRV_SLEW_OFST (30) -#define RG_PCIE_CLKDRV_AMP_OFST (27) -#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26) -#define RG_SSUSB_XTAL_MON_EN_OFST (25) -#define RG_SSUSB_XTAL_HYS_OFST (24) -#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8) -#define RG_SSUSB_SYSPLL_RESERVE_OFST (4) -#define RG_SSUSB_SYSPLL_FBSEL_OFST (2) -#define RG_SSUSB_SYSPLL_PREDIV_OFST (0) - -//U3D_reg2 -#define RG_SSUSB_SYSPLL_LF_OFST (31) -#define RG_SSUSB_SYSPLL_FBDIV_OFST (24) -#define RG_SSUSB_SYSPLL_POSDIV_OFST (22) -#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21) -#define RG_SSUSB_SYSPLL_BLP_OFST (20) -#define RG_SSUSB_SYSPLL_BP_OFST (19) -#define RG_SSUSB_SYSPLL_BR_OFST (18) -#define RG_SSUSB_SYSPLL_BC_OFST (17) -#define RG_SSUSB_SYSPLL_DIVEN_OFST (14) -#define RG_SSUSB_SYSPLL_FPEN_OFST (13) -#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12) -#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11) -#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10) -#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9) -#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8) - -//U3D_reg3 -#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16) - -//U3D_reg4 -#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1) - -//U3D_reg5 -#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29) -#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28) -#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27) -#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26) -#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25) -#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24) -#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23) -#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22) -#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21) -#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20) -#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0) - -//U3D_reg6 -#define RG_SSUSB_TX250MCK_INVB_OFST (31) -#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30) -#define RG_SSUSB_IDRV_CALIB_OFST (24) -#define RG_SSUSB_TX_R50_FON_OFST (23) -#define RG_SSUSB_TX_SR_OFST (20) -#define RG_SSUSB_TX_EIDLE_CM_OFST (16) -#define RG_SSUSB_RXDET_RSEL_OFST (14) -#define RG_SSUSB_RXDET_VTHSEL_OFST (12) -#define RG_SSUSB_CKMON_EN_OFST (11) -#define RG_SSUSB_CKMON_SEL_OFST (8) -#define RG_SSUSB_TX_VLMON_EN_OFST (7) -#define RG_SSUSB_TX_VLMON_SEL_OFST (6) -#define RG_SSUSB_RXLBTX_EN_OFST (5) -#define RG_SSUSB_TXLBRX_EN_OFST (4) - -//U3D_reg7 -#define RG_SSUSB_RESERVE_OFST (12) -#define RG_SSUSB_PLL_CKCTRL_OFST (10) -#define RG_SSUSB_PLL_POSDIV_OFST (8) -#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7) -#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6) -#define RG_SSUSB_PLL_EP_EN_OFST (5) -#define RG_SSUSB_PLL_VOD_EN_OFST (4) -#define RG_SSUSB_PLL_V11_EN_OFST (3) -#define RG_SSUSB_PLL_MONREF_EN_OFST (2) -#define RG_SSUSB_PLL_MONCK_EN_OFST (1) -#define RG_SSUSB_PLL_MONVC_EN_OFST (0) - -//U3D_reg8 -#define RG_SSUSB_PLL_RESERVE_OFST (0) - -//U3D_reg9 -#define RG_SSUSB_PLL_DDS_DMY_OFST (16) -#define RG_SSUSB_PLL_SSC_PRD_OFST (0) - -//U3D_regA -#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31) -#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30) -#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29) -#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28) -#define RG_SSUSB_PLL_DDS_VADJ_OFST (21) -#define RG_SSUSB_PLL_DDS_MONEN_OFST (20) -#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17) -#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16) -#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15) -#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14) -#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13) -#define RG_SSUSB_CDR_OSCDET_EN_OFST (12) -#define RG_SSUSB_CDR_MONMUX_OFST (11) -#define RG_SSUSB_CDR_CKCTRL_OFST (9) -#define RG_SSUSB_CDR_ACCEN_OFST (8) -#define RG_SSUSB_CDR_BYPASS_OFST (6) -#define RG_SSUSB_CDR_PI_SLEW_OFST (4) -#define RG_SSUSB_CDR_EPEN_OFST (3) -#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2) -#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1) -#define RG_SSUSB_CDR_MONEN_OFST (0) - -//U3D_regB -#define RG_SSUSB_CDR_MONEN_DIG_OFST (31) -#define RG_SSUSB_CDR_REGOD_OFST (29) -#define RG_SSUSB_RX_DAC_EN_OFST (26) -#define RG_SSUSB_RX_DAC_PWD_OFST (25) -#define RG_SSUSB_EQ_CURSEL_OFST (24) -#define RG_SSUSB_RX_DAC_MUX_OFST (19) -#define RG_SSUSB_RX_R2T_EN_OFST (18) -#define RG_SSUSB_RX_T2R_EN_OFST (17) -#define RG_SSUSB_RX_50_LOWER_OFST (14) -#define RG_SSUSB_RX_50_TAR_OFST (12) -#define RG_SSUSB_RX_SW_CTRL_OFST (7) -#define RG_PCIE_SIGDET_VTH_OFST (5) -#define RG_PCIE_SIGDET_LPF_OFST (3) -#define RG_SSUSB_LFPS_MON_EN_OFST (2) - -//U3D_regC -#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28) -#define RG_SSUSB_CDR_RESERVE_OFST (16) -#define RG_SSUSB_RXAFE_RESERVE_OFST (8) -#define RG_PCIE_RX_RESERVE_OFST (0) - -//U3D_redD -#define RGS_SSUSB_CDR_NO_OSC_OFST (8) -#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0) - -//U3D_regE -#define RG_SSUSB_INT_BIAS_SEL_OFST (4) -#define RG_SSUSB_EXT_BIAS_SEL_OFST (3) -#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2) -#define RG_SSUSB_RX_PD_RST_OFST (1) -#define RG_SSUSB_RX_PD_RST_PASS_OFST (0) - -/////////////////////////////////////////////////////////////////////////////// - -struct u3phya_da_reg { - //0x0 - PHY_LE32 reg0; - PHY_LE32 reg1; - PHY_LE32 reg4; - PHY_LE32 reg5; - //0x10 - PHY_LE32 reg6; - PHY_LE32 reg7; - PHY_LE32 reg8; - PHY_LE32 reg9; - //0x20 - PHY_LE32 reg10; - PHY_LE32 reg12; - PHY_LE32 reg13; - PHY_LE32 reg14; - //0x30 - PHY_LE32 reg15; - PHY_LE32 reg16; - PHY_LE32 reg19; - PHY_LE32 reg20; - //0x40 - PHY_LE32 reg21; - PHY_LE32 reg23; - PHY_LE32 reg25; - PHY_LE32 reg26; - //0x50 - PHY_LE32 reg28; - PHY_LE32 reg29; - PHY_LE32 reg30; - PHY_LE32 reg31; - //0x60 - PHY_LE32 reg32; - PHY_LE32 reg33; -}; - -//U3D_reg0 -#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24 -#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23 -#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22 -#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21 -#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20 -#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18 -#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16 -#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14 -#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12 -#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10 -#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8 -#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6 -#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4 -#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2 -#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0 - -//U3D_reg1 -#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30 -#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29 -#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28 -#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27 -#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26 -#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25 -#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24 -#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18 -#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17 -#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16 -#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8 -#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3 -#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2 -#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1 -#define RG_PCIE_MODE_U3 (0x1<<0) //0:0 - -//U3D_reg4 -#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22 -#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19 -#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16 -#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13 -#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10 -#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8 -#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6 -#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4 -#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2 -#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0 - -//U3D_reg5 -#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27 -#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24 -#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21 -#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18 -#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15 -#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12 -#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9 -#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6 -#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3 -#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0 - -//U3D_reg6 -#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24 -#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16 -#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8 -#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4 -#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0 - -//U3D_reg7 -#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24 -#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16 -#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8 -#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4 -#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0 - -//U3D_reg8 -#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24 -#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16 -#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8 -#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2 -#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0 - -//U3D_reg9 -#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24 -#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16 -#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8 -#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0 - -//U3D_reg10 -#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26 -#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24 -#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18 -#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16 -#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8 -#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0 - -//U3D_reg12 -#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0 - -//U3D_reg13 -#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0 - -//U3D_reg14 -#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0 - -//U3D_reg15 -#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0 - -//U3D_reg16 -#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0 - -//U3D_reg19 -#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0 - -//U3D_reg20 -#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0 - -//U3D_reg21 -#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0 - -//U3D_reg23 -#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0 - -//U3D_reg25 -#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0 - -//U3D_reg26 -#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25 -#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24 -#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16 -#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8 -#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0 - -//U3D_reg28 -#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24 -#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16 -#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10 -#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8 -#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0 - -//U3D_reg29 -#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24 -#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16 -#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6 -#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3 -#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0 - -//U3D_reg30 -#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24 -#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16 -#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6 -#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3 -#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0 - -//U3D_reg31 -#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24 -#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16 -#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8 -#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0 - -//U3D_reg32 -#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30 -#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28 -#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26 -#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24 -#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22 -#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20 -#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18 -#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16 -#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14 -#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12 -#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11 -#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10 -#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9 -#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8 -#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7 -#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0 - -//U3D_reg33 -#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26 -#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25 -#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24 -#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23 -#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16 -#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8 -#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6 -#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4 -#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2 -#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0 - - -/* OFFSET */ - -//U3D_reg0 -#define RG_PCIE_SPEED_PE2D_OFST (24) -#define RG_PCIE_SPEED_PE2H_OFST (23) -#define RG_PCIE_SPEED_PE1D_OFST (22) -#define RG_PCIE_SPEED_PE1H_OFST (21) -#define RG_PCIE_SPEED_U3_OFST (20) -#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18) -#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16) -#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14) -#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12) -#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10) -#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8) -#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6) -#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4) -#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2) -#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0) - -//U3D_reg1 -#define RG_USB20_REFCK_SEL_PE2D_OFST (30) -#define RG_USB20_REFCK_SEL_PE2H_OFST (29) -#define RG_USB20_REFCK_SEL_PE1D_OFST (28) -#define RG_USB20_REFCK_SEL_PE1H_OFST (27) -#define RG_USB20_REFCK_SEL_U3_OFST (26) -#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25) -#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24) -#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18) -#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17) -#define RG_PCIE_REFCK_DIV4_U3_OFST (16) -#define RG_PCIE_MODE_PE2D_OFST (8) -#define RG_PCIE_MODE_PE2H_OFST (3) -#define RG_PCIE_MODE_PE1D_OFST (2) -#define RG_PCIE_MODE_PE1H_OFST (1) -#define RG_PCIE_MODE_U3_OFST (0) - -//U3D_reg4 -#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22) -#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19) -#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16) -#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13) -#define RG_SSUSB_PLL_DIVEN_U3_OFST (10) -#define RG_SSUSB_PLL_BC_PE2D_OFST (8) -#define RG_SSUSB_PLL_BC_PE2H_OFST (6) -#define RG_SSUSB_PLL_BC_PE1D_OFST (4) -#define RG_SSUSB_PLL_BC_PE1H_OFST (2) -#define RG_SSUSB_PLL_BC_U3_OFST (0) - -//U3D_reg5 -#define RG_SSUSB_PLL_BR_PE2D_OFST (27) -#define RG_SSUSB_PLL_BR_PE2H_OFST (24) -#define RG_SSUSB_PLL_BR_PE1D_OFST (21) -#define RG_SSUSB_PLL_BR_PE1H_OFST (18) -#define RG_SSUSB_PLL_BR_U3_OFST (15) -#define RG_SSUSB_PLL_IC_PE2D_OFST (12) -#define RG_SSUSB_PLL_IC_PE2H_OFST (9) -#define RG_SSUSB_PLL_IC_PE1D_OFST (6) -#define RG_SSUSB_PLL_IC_PE1H_OFST (3) -#define RG_SSUSB_PLL_IC_U3_OFST (0) - -//U3D_reg6 -#define RG_SSUSB_PLL_IR_PE2D_OFST (24) -#define RG_SSUSB_PLL_IR_PE2H_OFST (16) -#define RG_SSUSB_PLL_IR_PE1D_OFST (8) -#define RG_SSUSB_PLL_IR_PE1H_OFST (4) -#define RG_SSUSB_PLL_IR_U3_OFST (0) - -//U3D_reg7 -#define RG_SSUSB_PLL_BP_PE2D_OFST (24) -#define RG_SSUSB_PLL_BP_PE2H_OFST (16) -#define RG_SSUSB_PLL_BP_PE1D_OFST (8) -#define RG_SSUSB_PLL_BP_PE1H_OFST (4) -#define RG_SSUSB_PLL_BP_U3_OFST (0) - -//U3D_reg8 -#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24) -#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16) -#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8) -#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2) -#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0) - -//U3D_reg9 -#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24) -#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16) -#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8) -#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0) - -//U3D_reg10 -#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26) -#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24) -#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18) -#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16) -#define RG_SSUSB_PLL_PREDIV_U3_OFST (8) -#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0) - -//U3D_reg12 -#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0) - -//U3D_reg13 -#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0) - -//U3D_reg14 -#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0) - -//U3D_reg15 -#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0) - -//U3D_reg16 -#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0) - -//U3D_reg19 -#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16) -#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0) - -//U3D_reg20 -#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16) -#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0) - -//U3D_reg21 -#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16) -#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0) - -//U3D_reg23 -#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16) -#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0) - -//U3D_reg25 -#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16) -#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0) - -//U3D_reg26 -#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25) -#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24) -#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16) -#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8) -#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0) - -//U3D_reg28 -#define RG_SSUSB_CDR_BPA_PE2D_OFST (24) -#define RG_SSUSB_CDR_BPA_PE2H_OFST (16) -#define RG_SSUSB_CDR_BPA_PE1D_OFST (10) -#define RG_SSUSB_CDR_BPA_PE1H_OFST (8) -#define RG_SSUSB_CDR_BPA_U3_OFST (0) - -//U3D_reg29 -#define RG_SSUSB_CDR_BPB_PE2D_OFST (24) -#define RG_SSUSB_CDR_BPB_PE2H_OFST (16) -#define RG_SSUSB_CDR_BPB_PE1D_OFST (6) -#define RG_SSUSB_CDR_BPB_PE1H_OFST (3) -#define RG_SSUSB_CDR_BPB_U3_OFST (0) - -//U3D_reg30 -#define RG_SSUSB_CDR_BR_PE2D_OFST (24) -#define RG_SSUSB_CDR_BR_PE2H_OFST (16) -#define RG_SSUSB_CDR_BR_PE1D_OFST (6) -#define RG_SSUSB_CDR_BR_PE1H_OFST (3) -#define RG_SSUSB_CDR_BR_U3_OFST (0) - -//U3D_reg31 -#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24) -#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16) -#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8) -#define RG_SSUSB_CDR_FBDIV_U3_OFST (0) - -//U3D_reg32 -#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30) -#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28) -#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26) -#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24) -#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22) -#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20) -#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18) -#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16) -#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14) -#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12) -#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11) -#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10) -#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9) -#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8) -#define RG_SSUSB_CDR_KVSEL_U3_OFST (7) -#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0) - -//U3D_reg33 -#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26) -#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25) -#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24) -#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23) -#define RG_SSUSB_RX_CMPWD_U3_OFST (16) -#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8) -#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6) -#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4) -#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2) -#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0) - - -/////////////////////////////////////////////////////////////////////////////// - -struct u3phyd_reg { - //0x0 - PHY_LE32 phyd_mix0; - PHY_LE32 phyd_mix1; - PHY_LE32 phyd_lfps0; - PHY_LE32 phyd_lfps1; - //0x10 - PHY_LE32 phyd_impcal0; - PHY_LE32 phyd_impcal1; - PHY_LE32 phyd_txpll0; - PHY_LE32 phyd_txpll1; - //0x20 - PHY_LE32 phyd_txpll2; - PHY_LE32 phyd_fl0; - PHY_LE32 phyd_mix2; - PHY_LE32 phyd_rx0; - //0x30 - PHY_LE32 phyd_t2rlb; - PHY_LE32 phyd_cppat; - PHY_LE32 phyd_mix3; - PHY_LE32 phyd_ebufctl; - //0x40 - PHY_LE32 phyd_pipe0; - PHY_LE32 phyd_pipe1; - PHY_LE32 phyd_mix4; - PHY_LE32 phyd_ckgen0; - //0x50 - PHY_LE32 phyd_mix5; - PHY_LE32 phyd_reserved; - PHY_LE32 phyd_cdr0; - PHY_LE32 phyd_cdr1; - //0x60 - PHY_LE32 phyd_pll_0; - PHY_LE32 phyd_pll_1; - PHY_LE32 phyd_bcn_det_1; - PHY_LE32 phyd_bcn_det_2; - //0x70 - PHY_LE32 eq0; - PHY_LE32 eq1; - PHY_LE32 eq2; - PHY_LE32 eq3; - //0x80 - PHY_LE32 eq_eye0; - PHY_LE32 eq_eye1; - PHY_LE32 eq_eye2; - PHY_LE32 eq_dfe0; - //0x90 - PHY_LE32 eq_dfe1; - PHY_LE32 eq_dfe2; - PHY_LE32 eq_dfe3; - PHY_LE32 reserve0; - //0xa0 - PHY_LE32 phyd_mon0; - PHY_LE32 phyd_mon1; - PHY_LE32 phyd_mon2; - PHY_LE32 phyd_mon3; - //0xb0 - PHY_LE32 phyd_mon4; - PHY_LE32 phyd_mon5; - PHY_LE32 phyd_mon6; - PHY_LE32 phyd_mon7; - //0xc0 - PHY_LE32 phya_rx_mon0; - PHY_LE32 phya_rx_mon1; - PHY_LE32 phya_rx_mon2; - PHY_LE32 phya_rx_mon3; - //0xd0 - PHY_LE32 phya_rx_mon4; - PHY_LE32 phya_rx_mon5; - PHY_LE32 phyd_cppat2; - PHY_LE32 eq_eye3; - //0xe0 - PHY_LE32 kband_out; - PHY_LE32 kband_out1; -}; - -//U3D_PHYD_MIX0 -#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31 -#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30 -#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29 -#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28 -#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27 -#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24 -#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16 -#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15 -#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14 -#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13 -#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12 -#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8 -#define RG_SSUSB_COMCNT (0xf<<4) //7:4 -#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0 - -//U3D_PHYD_MIX1 -#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31 -#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28 -#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24 -#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23 -#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22 -#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16 -#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15 -#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14 -#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8 -#define RG_SSUSB_BERT_EN (0x1<<7) //7:7 -#define RG_SSUSB_SCP_TH (0x7<<4) //6:4 -#define RG_SSUSB_SCP_EN (0x1<<3) //3:3 -#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0 - -//U3D_PHYD_LFPS0 -#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30 -#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29 -#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24 -#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23 -#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22 -#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20 -#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16 -#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15 -#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14 -#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13 -#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8 -#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7 -#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6 -#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5 -#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0 - -//U3D_PHYD_LFPS1 -#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28 -#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24 -#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16 -#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8 -#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0 - -//U3D_PHYD_IMPCAL0 -#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31 -#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30 -#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29 -#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24 -#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16 -#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10 -#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 - -//U3D_PHYD_IMPCAL1 -#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31 -#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30 -#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29 -#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24 -#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16 -#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10 -#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 - -//U3D_PHYD_TXPLL0 -#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27 -#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26 -#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25 -#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16 -#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12 -#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10 -#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0 - -//U3D_PHYD_TXPLL1 -#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31 -#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30 -#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28 -#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27 -#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26 -#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25 -#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24 -#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23 -#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22 -#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16 -#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15 -#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14 -#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13 -#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12 -#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11 -#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9 -#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8 -#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7 -#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6 -#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5 -#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4 -#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3 -#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2 - -//U3D_PHYD_TXPLL2 -#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31 -#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30 -#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29 -#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28 -#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27 -#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26 -#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25 -#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24 -#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16 -#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11 -#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10 -#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9 -#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8 -#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7 -#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6 -#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0 - -//U3D_PHYD_FL0 -#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16 -#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0 - -//U3D_PHYD_MIX2 -#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31 -#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30 -#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29 -#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24 -#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18 -#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16 -#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8 -#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0 - -//U3D_PHYD_RX0 -#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24 -#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16 -#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15 -#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14 -#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13 -#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11 -#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10 -#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9 -#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8 -#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7 -#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6 -#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5 -#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4 -#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3 -#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2 -#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1 -#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0 - -//U3D_PHYD_T2RLB -#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28 -#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27 -#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26 -#define RG_SSUSB_VALID_EN (0x1<<25) //25:25 -#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24 -#define RG_SSUSB_K_EMP (0xf<<20) //23:20 -#define RG_SSUSB_K_FUL (0xf<<16) //19:16 -#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12 -#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10 -#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8 -#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0 - -//U3D_PHYD_CPPAT -#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24 -#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21 -#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20 -#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16 -#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8 -#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0 - -//U3D_PHYD_MIX3 -#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31 -#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30 -#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28 -#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24 -#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23 -#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20 -#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19 -#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16 -#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15 -#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14 -#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13 -#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12 -#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11 -#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0 - -//U3D_PHYD_EBUFCTL -#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0 - -//U3D_PHYD_PIPE0 -#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30 -#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29 -#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28 -#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26 -#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24 -#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23 -#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22 -#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21 -#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20 -#define RG_SSUSB_TXDATAK (0xf<<16) //19:16 -#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15 -#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14 -#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13 -#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12 -#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4 -#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1 -#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0 - -//U3D_PHYD_PIPE1 -#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0 - -//U3D_PHYD_MIX4 -#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24 -#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16 -#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0 - -//U3D_PHYD_CKGEN0 -#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27 -#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24 -#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8 -#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0 - -//U3D_PHYD_MIX5 -#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16 -#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0 - -//U3D_PHYD_RESERVED -#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0 -//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11) -//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12) -//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9) -//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10) - -//U3D_PHYD_CDR0 -#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28 -#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24 -#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16 -#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8 -#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0 - -//U3D_PHYD_CDR1 -#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24 -#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16 -#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8 -#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6 -#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0 - -//U3D_PHYD_PLL_0 -#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28 -#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27 -#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26 -#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25 -#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15 -#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5 -#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4 -#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3 -#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2 -#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1 -#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0 - -//U3D_PHYD_PLL_1 -#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 -#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 -#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 -#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 - -//U3D_PHYD_BCN_DET_1 -#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16 -#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0 - -//U3D_PHYD_BCN_DET_2 -#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16 -#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12 -#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0 - -//U3D_EQ0 -#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24 -#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8 -#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0 - -//U3D_EQ1 -#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24 -#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8 -#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0 - -//U3D_EQ2 -#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24 -#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14 -#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11 -#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8 -#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6 -#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3 -#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0 - -//U3D_EQ3 -#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28 -#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24 -#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8 -#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7 -#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0 - -//U3D_EQ_EYE0 -#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25 -#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24 -#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8 -#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7 -#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4 -#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3 - -//U3D_EQ_EYE1 -#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24 -#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7 - -//U3D_EQ_EYE2 -#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31 -#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24 -#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22 -#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16 - -//U3D_EQ_DFE0 -#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28 -#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27 -#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24 -#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23 -#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8 -#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0 - -//U3D_EQ_DFE1 -#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16 -#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12 -#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8 -#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7 -#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6 -#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4 -#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2 -#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1 -#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0 - -//U3D_EQ_DFE2 -#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24 -#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16 -#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8 -#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0 - -//U3D_EQ_DFE3 -#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0 - -//U3D_PHYD_MON0 -#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16 -#define RGS_SSUSB_LFPS (0xf<<12) //15:12 -#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8 -#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0 - -//U3D_PHYD_MON1 -#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0 - -//U3D_PHYD_MON2 -#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16 -#define RGS_SSUSB_RETRACK (0xf<<12) //15:12 -#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10 -#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9 -#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8 -#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0 - -//U3D_PHYD_MON3 -#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16 -#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0 - -//U3D_PHYD_MON4 -#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24 -#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16 -#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0 - -//U3D_PHYD_MON5 -#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16 -#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15 -#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14 -#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13 -#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12 -#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11 -#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10 -#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9 -#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8 -#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6 -#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5 -#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4 -#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3 -#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2 -#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1 -#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0 - -//U3D_PHYD_MON6 -#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30 -#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29 -#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24 -#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16 -#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8 -#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4 -#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0 - -//U3D_PHYD_MON7 -#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8 -#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0 - -//U3D_PHYA_RX_MON0 -#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24 -#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16 -#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8 -#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0 - -//U3D_PHYA_RX_MON1 -#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24 -#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16 -#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8 -#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0 - -//U3D_PHYA_RX_MON2 -#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31 -#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24 -#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16 -#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8 -#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0 - -//U3D_PHYA_RX_MON3 -#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0 - -//U3D_PHYA_RX_MON4 -#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0 - -//U3D_PHYA_RX_MON5 -#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8 -#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7 -#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0 - -//U3D_PHYD_CPPAT2 -#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16 -#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8 -#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0 - -//U3D_EQ_EYE3 -#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24 -#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0 - -//U3D_KBAND_OUT -#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 -#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 -#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 -#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 - -//U3D_KBAND_OUT1 -#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24 -#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16 -#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8 -#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0 - - -/* OFFSET */ - -//U3D_PHYD_MIX0 -#define RG_SSUSB_P_P3_TX_NG_OFST (31) -#define RG_SSUSB_TSEQ_EN_OFST (30) -#define RG_SSUSB_TSEQ_POLEN_OFST (29) -#define RG_SSUSB_TSEQ_POL_OFST (28) -#define RG_SSUSB_P_P3_PCLK_NG_OFST (27) -#define RG_SSUSB_TSEQ_TH_OFST (24) -#define RG_SSUSB_PRBS_BERTH_OFST (16) -#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15) -#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14) -#define RG_SSUSB_PRBS_EN_OFST (13) -#define RG_SSUSB_BPSLOCK_OFST (12) -#define RG_SSUSB_RTCOMCNT_OFST (8) -#define RG_SSUSB_COMCNT_OFST (4) -#define RG_SSUSB_PRBSEL_CALIB_OFST (0) - -//U3D_PHYD_MIX1 -#define RG_SSUSB_SLEEP_EN_OFST (31) -#define RG_SSUSB_PRBSEL_PCS_OFST (28) -#define RG_SSUSB_TXLFPS_PRD_OFST (24) -#define RG_SSUSB_P_RX_P0S_CK_OFST (23) -#define RG_SSUSB_P_TX_P0S_CK_OFST (22) -#define RG_SSUSB_PDNCTL_OFST (16) -#define RG_SSUSB_TX_DRV_EN_OFST (15) -#define RG_SSUSB_TX_DRV_SEL_OFST (14) -#define RG_SSUSB_TX_DRV_DLY_OFST (8) -#define RG_SSUSB_BERT_EN_OFST (7) -#define RG_SSUSB_SCP_TH_OFST (4) -#define RG_SSUSB_SCP_EN_OFST (3) -#define RG_SSUSB_RXANSIDEC_TEST_OFST (0) - -//U3D_PHYD_LFPS0 -#define RG_SSUSB_LFPS_PWD_OFST (30) -#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29) -#define RG_SSUSB_RXLFPS_OVF_OFST (24) -#define RG_SSUSB_P3_ENTRY_SEL_OFST (23) -#define RG_SSUSB_P3_ENTRY_OFST (22) -#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20) -#define RG_SSUSB_RXLFPS_CDRTH_OFST (16) -#define RG_SSUSB_LOCK5G_BLOCK_OFST (15) -#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14) -#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13) -#define RG_SSUSB_RXLFPS_LOB_OFST (8) -#define RG_SSUSB_TXLFPS_EN_OFST (7) -#define RG_SSUSB_TXLFPS_SEL_OFST (6) -#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5) -#define RG_SSUSB_RXLFPS_UPB_OFST (0) - -//U3D_PHYD_LFPS1 -#define RG_SSUSB_RX_IMP_BIAS_OFST (28) -#define RG_SSUSB_TX_IMP_BIAS_OFST (24) -#define RG_SSUSB_FWAKE_TH_OFST (16) -#define RG_SSUSB_RXLFPS_UDF_OFST (8) -#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0) - -//U3D_PHYD_IMPCAL0 -#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31) -#define RG_SSUSB_TX_IMPCAL_EN_OFST (30) -#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29) -#define RG_SSUSB_TX_IMPSEL_OFST (24) -#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16) -#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10) -#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0) - -//U3D_PHYD_IMPCAL1 -#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31) -#define RG_SSUSB_RX_IMPCAL_EN_OFST (30) -#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29) -#define RG_SSUSB_RX_IMPSEL_OFST (24) -#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16) -#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10) -#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0) - -//U3D_PHYD_TXPLL0 -#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27) -#define RG_SSUSB_TXPLL_ON_OFST (26) -#define RG_SSUSB_FORCE_TXPLLON_OFST (25) -#define RG_SSUSB_TXPLL_STBCYC_OFST (16) -#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12) -#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10) -#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0) - -//U3D_PHYD_TXPLL1 -#define RG_SSUSB_PLL_NCPO_EN_OFST (31) -#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30) -#define RG_SSUSB_PLL_NCPO_CHG_OFST (28) -#define RG_SSUSB_PLL_DDS_RSTB_OFST (27) -#define RG_SSUSB_PLL_DDS_PWDB_OFST (26) -#define RG_SSUSB_PLL_DDSEN_OFST (25) -#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24) -#define RG_SSUSB_PLL_PWD_OFST (23) -#define RG_SSUSB_RX_AFE_PWD_OFST (22) -#define RG_SSUSB_PLL_TCADJ_OFST (16) -#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15) -#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14) -#define RG_SSUSB_FORCE_CDR_PWD_OFST (13) -#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12) -#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11) -#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9) -#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8) -#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7) -#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6) -#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5) -#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4) -#define RG_SSUSB_FORCE_PLL_PWD_OFST (3) -#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2) - -//U3D_PHYD_TXPLL2 -#define RG_SSUSB_TX_LFPS_EN_OFST (31) -#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30) -#define RG_SSUSB_TX_LFPS_OFST (29) -#define RG_SSUSB_FORCE_TX_LFPS_OFST (28) -#define RG_SSUSB_RXPLL_STB_OFST (27) -#define RG_SSUSB_TXPLL_STB_OFST (26) -#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25) -#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24) -#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16) -#define RG_SSUSB_RXPLL_STBMODE_OFST (11) -#define RG_SSUSB_RXPLL_ON_OFST (10) -#define RG_SSUSB_FORCE_RXPLLON_OFST (9) -#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8) -#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7) -#define RG_SSUSB_CDR_PWD_OFST (6) -#define RG_SSUSB_CDR_TCADJ_OFST (0) - -//U3D_PHYD_FL0 -#define RG_SSUSB_RX_FL_TARGET_OFST (16) -#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0) - -//U3D_PHYD_MIX2 -#define RG_SSUSB_RX_EQ_RST_OFST (31) -#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30) -#define RG_SSUSB_RXVAL_RST_OFST (29) -#define RG_SSUSB_RXVAL_CNT_OFST (24) -#define RG_SSUSB_CDROS_EN_OFST (18) -#define RG_SSUSB_CDR_LCKOP_OFST (16) -#define RG_SSUSB_RX_FL_LOCKTH_OFST (8) -#define RG_SSUSB_RX_FL_OFFSET_OFST (0) - -//U3D_PHYD_RX0 -#define RG_SSUSB_T2RLB_BERTH_OFST (24) -#define RG_SSUSB_T2RLB_PAT_OFST (16) -#define RG_SSUSB_T2RLB_EN_OFST (15) -#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14) -#define RG_SSUSB_T2RLB_SERIAL_OFST (13) -#define RG_SSUSB_T2RLB_MODE_OFST (11) -#define RG_SSUSB_RX_SAOSC_EN_OFST (10) -#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9) -#define RG_SSUSB_RX_DFE_OPTION_OFST (8) -#define RG_SSUSB_RX_DFE_EN_OFST (7) -#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6) -#define RG_SSUSB_RX_EQ_EN_OFST (5) -#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4) -#define RG_SSUSB_RX_SAOSC_RST_OFST (3) -#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2) -#define RG_SSUSB_RX_DFE_RST_OFST (1) -#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0) - -//U3D_PHYD_T2RLB -#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28) -#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27) -#define RG_SSUSB_BPANSIENC_OFST (26) -#define RG_SSUSB_VALID_EN_OFST (25) -#define RG_SSUSB_EBUF_SRST_OFST (24) -#define RG_SSUSB_K_EMP_OFST (20) -#define RG_SSUSB_K_FUL_OFST (16) -#define RG_SSUSB_T2RLB_BDATRST_OFST (12) -#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10) -#define RG_SSUSB_T2RLB_PATMODE_OFST (8) -#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0) - -//U3D_PHYD_CPPAT -#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24) -#define RG_SSUSB_CPPAT_TOZ_OFST (21) -#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20) -#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16) -#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8) -#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0) - -//U3D_PHYD_MIX3 -#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31) -#define RG_SSUSB_P_CDROS_EN_OFST (30) -#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28) -#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24) -#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23) -#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20) -#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19) -#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16) -#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15) -#define RG_SSUSB_PLL_SSCEN_OFST (14) -#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13) -#define RG_SSUSB_CDR_PI_PWD_OFST (12) -#define RG_SSUSB_CDR_PI_MODE_OFST (11) -#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0) - -//U3D_PHYD_EBUFCTL -#define RG_SSUSB_EBUFCTL_OFST (0) - -//U3D_PHYD_PIPE0 -#define RG_SSUSB_RXTERMINATION_OFST (30) -#define RG_SSUSB_RXEQTRAINING_OFST (29) -#define RG_SSUSB_RXPOLARITY_OFST (28) -#define RG_SSUSB_TXDEEMPH_OFST (26) -#define RG_SSUSB_POWERDOWN_OFST (24) -#define RG_SSUSB_TXONESZEROS_OFST (23) -#define RG_SSUSB_TXELECIDLE_OFST (22) -#define RG_SSUSB_TXDETECTRX_OFST (21) -#define RG_SSUSB_PIPE_SEL_OFST (20) -#define RG_SSUSB_TXDATAK_OFST (16) -#define RG_SSUSB_CDR_STABLE_SEL_OFST (15) -#define RG_SSUSB_CDR_STABLE_OFST (14) -#define RG_SSUSB_CDR_RSTB_SEL_OFST (13) -#define RG_SSUSB_CDR_RSTB_OFST (12) -#define RG_SSUSB_P_ERROR_SEL_OFST (4) -#define RG_SSUSB_TXMARGIN_OFST (1) -#define RG_SSUSB_TXCOMPLIANCE_OFST (0) - -//U3D_PHYD_PIPE1 -#define RG_SSUSB_TXDATA_OFST (0) - -//U3D_PHYD_MIX4 -#define RG_SSUSB_CDROS_CNT_OFST (24) -#define RG_SSUSB_T2RLB_BER_EN_OFST (16) -#define RG_SSUSB_T2RLB_BER_RATE_OFST (0) - -//U3D_PHYD_CKGEN0 -#define RG_SSUSB_RFIFO_IMPLAT_OFST (27) -#define RG_SSUSB_TFIFO_PSEL_OFST (24) -#define RG_SSUSB_CKGEN_PSEL_OFST (8) -#define RG_SSUSB_RXCK_INV_OFST (0) - -//U3D_PHYD_MIX5 -#define RG_SSUSB_PRB_SEL_OFST (16) -#define RG_SSUSB_RXPLL_STBCYC_OFST (0) - -//U3D_PHYD_RESERVED -#define RG_SSUSB_PHYD_RESERVE_OFST (0) -//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11) -//#define RG_SSUSB_RX_SIGDET_EN_OFST (12) -//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9) -//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10) - -//U3D_PHYD_CDR0 -#define RG_SSUSB_CDR_BIC_LTR_OFST (28) -#define RG_SSUSB_CDR_BIC_LTD0_OFST (24) -#define RG_SSUSB_CDR_BC_LTD1_OFST (16) -#define RG_SSUSB_CDR_BC_LTR_OFST (8) -#define RG_SSUSB_CDR_BC_LTD0_OFST (0) - -//U3D_PHYD_CDR1 -#define RG_SSUSB_CDR_BIR_LTD1_OFST (24) -#define RG_SSUSB_CDR_BIR_LTR_OFST (16) -#define RG_SSUSB_CDR_BIR_LTD0_OFST (8) -#define RG_SSUSB_CDR_BW_SEL_OFST (6) -#define RG_SSUSB_CDR_BIC_LTD1_OFST (0) - -//U3D_PHYD_PLL_0 -#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28) -#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27) -#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26) -#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25) -#define RG_SSUSB_P_EQ_T_SEL_OFST (15) -#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5) -#define RG_SSUSB_PLLBAND_RECAL_OFST (4) -#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3) -#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2) -#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1) -#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0) - -//U3D_PHYD_PLL_1 -#define RG_SSUSB_CDR_BAND_5G_OFST (24) -#define RG_SSUSB_CDR_BAND_2P5G_OFST (16) -#define RG_SSUSB_PLL_BAND_5G_OFST (8) -#define RG_SSUSB_PLL_BAND_2P5G_OFST (0) - -//U3D_PHYD_BCN_DET_1 -#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16) -#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0) - -//U3D_PHYD_BCN_DET_2 -#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16) -#define RG_SSUSB_BCN_DET_DIS_OFST (12) -#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0) - -//U3D_EQ0 -#define RG_SSUSB_EQ_DLHL_LFI_OFST (24) -#define RG_SSUSB_EQ_DHHL_LFI_OFST (16) -#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8) -#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0) - -//U3D_EQ1 -#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24) -#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16) -#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8) -#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0) - -//U3D_EQ2 -#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24) -#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16) -#define RG_SSUSB_EQ_STOPTIME_OFST (14) -#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11) -#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8) -#define RG_SSUSB_EQ_STARTTIME_OFST (6) -#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3) -#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0) - -//U3D_EQ3 -#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28) -#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24) -#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16) -#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8) -#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7) -#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0) - -//U3D_EQ_EYE0 -#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25) -#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24) -#define RG_SSUSB_EQ_EYE0_Y_OFST (16) -#define RG_SSUSB_EQ_EYE1_Y_OFST (8) -#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7) -#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4) -#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3) - -//U3D_EQ_EYE1 -#define RG_SSUSB_EQ_SIGDET_OFST (24) -#define RG_SSUSB_EQ_EYE_MASK_OFST (7) - -//U3D_EQ_EYE2 -#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31) -#define RG_SSUSB_EQ_SD_CNT1_OFST (24) -#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22) -#define RG_SSUSB_EQ_SD_CNT0_OFST (16) - -//U3D_EQ_DFE0 -#define RG_SSUSB_EQ_LEQMAX_OFST (28) -#define RG_SSUSB_EQ_DFEX_EN_OFST (27) -#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24) -#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23) -#define RG_SSUSB_EQ_PIEYE_INI_OFST (16) -#define RG_SSUSB_EQ_PI90_INI_OFST (8) -#define RG_SSUSB_EQ_PI0_INI_OFST (0) - -//U3D_EQ_DFE1 -#define RG_SSUSB_EQ_REV_OFST (16) -#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12) -#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8) -#define RG_SSUSB_EQ_DFEX_RST_OFST (7) -#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6) -#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4) -#define RG_SSUSB_EQ_DFEX_DIS_OFST (2) -#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1) -#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0) - -//U3D_EQ_DFE2 -#define RG_SSUSB_EQ_MON_SEL_OFST (24) -#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16) -#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8) -#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0) - -//U3D_EQ_DFE3 -#define RG_SSUSB_EQ_RESERVED_OFST (0) - -//U3D_PHYD_MON0 -#define RGS_SSUSB_BERT_BERC_OFST (16) -#define RGS_SSUSB_LFPS_OFST (12) -#define RGS_SSUSB_TRAINDEC_OFST (8) -#define RGS_SSUSB_SCP_PAT_OFST (0) - -//U3D_PHYD_MON1 -#define RGS_SSUSB_RX_FL_OUT_OFST (0) - -//U3D_PHYD_MON2 -#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16) -#define RGS_SSUSB_RETRACK_OFST (12) -#define RGS_SSUSB_RXPLL_LOCK_OFST (10) -#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9) -#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8) -#define RGS_SSUSB_PDNCTL_OFST (0) - -//U3D_PHYD_MON3 -#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16) -#define RGS_SSUSB_PRBS_ERRCNT_OFST (0) - -//U3D_PHYD_MON4 -#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24) -#define RGS_SSUSB_SCP_DETCNT_OFST (16) -#define RGS_SSUSB_TSEQ_DETCNT_OFST (0) - -//U3D_PHYD_MON5 -#define RGS_SSUSB_EBUFMSG_OFST (16) -#define RGS_SSUSB_BERT_LOCK_OFST (15) -#define RGS_SSUSB_SCP_DET_OFST (14) -#define RGS_SSUSB_TSEQ_DET_OFST (13) -#define RGS_SSUSB_EBUF_UDF_OFST (12) -#define RGS_SSUSB_EBUF_OVF_OFST (11) -#define RGS_SSUSB_PRBS_PASSTH_OFST (10) -#define RGS_SSUSB_PRBS_PASS_OFST (9) -#define RGS_SSUSB_PRBS_LOCK_OFST (8) -#define RGS_SSUSB_T2RLB_ERR_OFST (6) -#define RGS_SSUSB_T2RLB_PASSTH_OFST (5) -#define RGS_SSUSB_T2RLB_PASS_OFST (4) -#define RGS_SSUSB_T2RLB_LOCK_OFST (3) -#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2) -#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1) -#define RGS_SSUSB_RXDETECTED_OFST (0) - -//U3D_PHYD_MON6 -#define RGS_SSUSB_SIGCAL_DONE_OFST (30) -#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29) -#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24) -#define RGS_SSUSB_RX_IMP_SEL_OFST (16) -#define RGS_SSUSB_TX_IMP_SEL_OFST (8) -#define RGS_SSUSB_TFIFO_MSG_OFST (4) -#define RGS_SSUSB_RFIFO_MSG_OFST (0) - -//U3D_PHYD_MON7 -#define RGS_SSUSB_FT_OUT_OFST (8) -#define RGS_SSUSB_PRB_OUT_OFST (0) - -//U3D_PHYA_RX_MON0 -#define RGS_SSUSB_EQ_DCLEQ_OFST (24) -#define RGS_SSUSB_EQ_DCD0H_OFST (16) -#define RGS_SSUSB_EQ_DCD0L_OFST (8) -#define RGS_SSUSB_EQ_DCD1H_OFST (0) - -//U3D_PHYA_RX_MON1 -#define RGS_SSUSB_EQ_DCD1L_OFST (24) -#define RGS_SSUSB_EQ_DCE0_OFST (16) -#define RGS_SSUSB_EQ_DCE1_OFST (8) -#define RGS_SSUSB_EQ_DCHHL_OFST (0) - -//U3D_PHYA_RX_MON2 -#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31) -#define RGS_SSUSB_EQ_DCLHL_OFST (24) -#define RGS_SSUSB_EQ_STATUS_OFST (16) -#define RGS_SSUSB_EQ_DCEYE0_OFST (8) -#define RGS_SSUSB_EQ_DCEYE1_OFST (0) - -//U3D_PHYA_RX_MON3 -#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0) - -//U3D_PHYA_RX_MON4 -#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0) - -//U3D_PHYA_RX_MON5 -#define RGS_SSUSB_EQ_DCLEQOS_OFST (8) -#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7) -#define RGS_SSUSB_EQ_PILPO_OFST (0) - -//U3D_PHYD_CPPAT2 -#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16) -#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8) -#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0) - -//U3D_EQ_EYE3 -#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24) -#define RG_SSUSB_EQ_EYE_CNT_OFST (0) - -//U3D_KBAND_OUT -#define RGS_SSUSB_CDR_BAND_5G_OFST (24) -#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16) -#define RGS_SSUSB_PLL_BAND_5G_OFST (8) -#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0) - -//U3D_KBAND_OUT1 -#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24) -#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16) -#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8) -#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0) - - -/////////////////////////////////////////////////////////////////////////////// - -struct u3phyd_bank2_reg { - //0x0 - PHY_LE32 b2_phyd_top1; - PHY_LE32 b2_phyd_top2; - PHY_LE32 b2_phyd_top3; - PHY_LE32 b2_phyd_top4; - //0x10 - PHY_LE32 b2_phyd_top5; - PHY_LE32 b2_phyd_top6; - PHY_LE32 b2_phyd_top7; - PHY_LE32 b2_phyd_p_sigdet1; - //0x20 - PHY_LE32 b2_phyd_p_sigdet2; - PHY_LE32 b2_phyd_p_sigdet_cal1; - PHY_LE32 b2_phyd_rxdet1; - PHY_LE32 b2_phyd_rxdet2; - //0x30 - PHY_LE32 b2_phyd_misc0; - PHY_LE32 b2_phyd_misc2; - PHY_LE32 b2_phyd_misc3; - PHY_LE32 reserve0; - //0x40 - PHY_LE32 b2_rosc_0; - PHY_LE32 b2_rosc_1; - PHY_LE32 b2_rosc_2; - PHY_LE32 b2_rosc_3; - //0x50 - PHY_LE32 b2_rosc_4; - PHY_LE32 b2_rosc_5; - PHY_LE32 b2_rosc_6; - PHY_LE32 b2_rosc_7; - //0x60 - PHY_LE32 b2_rosc_8; - PHY_LE32 b2_rosc_9; - PHY_LE32 b2_rosc_a; - PHY_LE32 reserve1; - //0x70~0xd0 - PHY_LE32 reserve2[28]; - //0xe0 - PHY_LE32 phyd_version; - PHY_LE32 phyd_model; -}; - -//U3D_B2_PHYD_TOP1 -#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28 -#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24 -#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17 -#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16 -#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15 -#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14 -#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13 -#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12 -#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11 -#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10 -#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9 -#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8 -#define RG_SSUSB_RATE (0x1<<6) //6:6 -#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5 -#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4 -#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3 -#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1 -#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0 - -//U3D_B2_PHYD_TOP2 -#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30 -#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24 -#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22 -#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16 -#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14 -#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8 -#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6 -#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0 - -//U3D_B2_PHYD_TOP3 -#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25 -#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24 -#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16 -#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13 -#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8 -#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0 - -//U3D_B2_PHYD_TOP4 -#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28 -#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24 -#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16 -#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8 -#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0 - -//U3D_B2_PHYD_TOP5 -#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24 -#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16 -#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8 -#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0 - -//U3D_B2_PHYD_TOP6 -#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28 -#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24 -#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16 -#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8 -#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0 - -//U3D_B2_PHYD_TOP7 -#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24 -#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16 -#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8 -#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0 - -//U3D_B2_PHYD_P_SIGDET1 -#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31 -#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24 -#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16 -#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8 -#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0 - -//U3D_B2_PHYD_P_SIGDET2 -#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29 -#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28 -#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27 -#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25 -#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24 -#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16 -#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10 -#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8 -#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6 -#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5 -#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4 -#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2 -#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0 - -//U3D_B2_PHYD_P_SIGDET_CAL1 -#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24 -#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16 -#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8 -#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3 -#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2 -#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1 -#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0 - -//U3D_B2_PHYD_RXDET1 -#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31 -#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30 -#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29 -#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28 -#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27 -#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18 -#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9 -#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0 - -//U3D_B2_PHYD_RXDET2 -#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31 -#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30 -#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29 -#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18 -#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9 -#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0 - -//U3D_B2_PHYD_MISC0 -#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22 -#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21 -#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20 -#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16 -#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15 -#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14 -#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13 -#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12 -#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11 -#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10 -#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8 -#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5 -#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4 -#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2 -#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1 -#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0 - -//U3D_B2_PHYD_MISC2 -#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31 -#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27 -#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26 -#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25 -#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24 -#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23 -#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22 -#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13 -#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7 -#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1 -#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0 - -//U3D_B2_PHYD_MISC3 -#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16 -#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0 - -//U3D_B2_ROSC_0 -#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23 -#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16 -#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3 -#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2 -#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1 -#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0 - -//U3D_B2_ROSC_1 -#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20 -#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19 -#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17 -#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16 -#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8 -#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0 - -//U3D_B2_ROSC_2 -#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_3 -#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_4 -#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_5 -#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_6 -#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_7 -#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_8 -#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16 -#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2 -#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1 -#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0 - -//U3D_B2_ROSC_9 -#define RGS_FM_RING_CNT (0xffff<<16) //31:16 -#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10 -#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9 -#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8 -#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0 - -//U3D_B2_ROSC_A -#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0 - -//U3D_PHYD_VERSION -#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0 - -//U3D_PHYD_MODEL -#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0 - - -/* OFFSET */ - -//U3D_B2_PHYD_TOP1 -#define RG_SSUSB_PCIE2_K_EMP_OFST (28) -#define RG_SSUSB_PCIE2_K_FUL_OFST (24) -#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17) -#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16) -#define RG_SSUSB_SIGDET_EN_OFST (15) -#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14) -#define RG_SSUSB_CLKRX_EN_OFST (13) -#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12) -#define RG_SSUSB_CLKTX_EN_OFST (11) -#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10) -#define RG_SSUSB_CLK_REQ_N_I_OFST (9) -#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8) -#define RG_SSUSB_RATE_OFST (6) -#define RG_SSUSB_FORCE_RATE_OFST (5) -#define RG_SSUSB_PCIE_MODE_SEL_OFST (4) -#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3) -#define RG_SSUSB_PHY_MODE_OFST (1) -#define RG_SSUSB_FORCE_PHY_MODE_OFST (0) - -//U3D_B2_PHYD_TOP2 -#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30) -#define RG_SSUSB_IDRV_6DB_OFST (24) -#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22) -#define RG_SSUSB_IDEM_3P5DB_OFST (16) -#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14) -#define RG_SSUSB_IDRV_3P5DB_OFST (8) -#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6) -#define RG_SSUSB_IDRV_0DB_OFST (0) - -//U3D_B2_PHYD_TOP3 -#define RG_SSUSB_TX_BIASI_OFST (25) -#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24) -#define RG_SSUSB_TX_BIASI_EN_OFST (16) -#define RG_SSUSB_FORCE_TX_BIASI_OFST (13) -#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8) -#define RG_SSUSB_IDEM_6DB_OFST (0) - -//U3D_B2_PHYD_TOP4 -#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28) -#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24) -#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16) -#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8) -#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0) - -//U3D_B2_PHYD_TOP5 -#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24) -#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16) -#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8) -#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0) - -//U3D_B2_PHYD_TOP6 -#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28) -#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24) -#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16) -#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8) -#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0) - -//U3D_B2_PHYD_TOP7 -#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24) -#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16) -#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8) -#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0) - -//U3D_B2_PHYD_P_SIGDET1 -#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31) -#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24) -#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16) -#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8) -#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0) - -//U3D_B2_PHYD_P_SIGDET2 -#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29) -#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28) -#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27) -#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25) -#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24) -#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16) -#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10) -#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8) -#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6) -#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5) -#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4) -#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2) -#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0) - -//U3D_B2_PHYD_P_SIGDET_CAL1 -#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24) -#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16) -#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8) -#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3) -#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2) -#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1) -#define RG_SSUSB_P_SIGDET_REK_OFST (0) - -//U3D_B2_PHYD_RXDET1 -#define RG_SSUSB_RXDET_PRB_SEL_OFST (31) -#define RG_SSUSB_FORCE_CMDET_OFST (30) -#define RG_SSUSB_RXDET_EN_OFST (29) -#define RG_SSUSB_FORCE_RXDET_EN_OFST (28) -#define RG_SSUSB_RXDET_K_TWICE_OFST (27) -#define RG_SSUSB_RXDET_STB3_SET_OFST (18) -#define RG_SSUSB_RXDET_STB2_SET_OFST (9) -#define RG_SSUSB_RXDET_STB1_SET_OFST (0) - -//U3D_B2_PHYD_RXDET2 -#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31) -#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30) -#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29) -#define RG_SSUSB_PDN_T_SEL_OFST (18) -#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9) -#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0) - -//U3D_B2_PHYD_MISC0 -#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22) -#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21) -#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20) -#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16) -#define RG_SSUSB_LFPS_PSEL_OFST (15) -#define RG_SSUSB_RX_SIGDET_EN_OFST (14) -#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13) -#define RG_SSUSB_RX_PI_CAL_EN_OFST (12) -#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11) -#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10) -#define RG_SSUSB_T2RLB_PSEL_OFST (8) -#define RG_SSUSB_PPCTL_PSEL_OFST (5) -#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4) -#define RG_SSUSB_BERTLB_PSEL_OFST (2) -#define RG_SSUSB_RETRACK_DIS_OFST (1) -#define RG_SSUSB_PPERRCNT_CLR_OFST (0) - -//U3D_B2_PHYD_MISC2 -#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31) -#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27) -#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26) -#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25) -#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24) -#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23) -#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22) -#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13) -#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7) -#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1) -#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0) - -//U3D_B2_PHYD_MISC3 -#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16) -#define RGS_SSUSB_PPERRCNT_OFST (0) - -//U3D_B2_ROSC_0 -#define RG_SSUSB_RING_OSC_CNTEND_OFST (23) -#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16) -#define RG_SSUSB_RING_OSC_EN_OFST (3) -#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2) -#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1) -#define RG_SSUSB_RING_BYPASS_DET_OFST (0) - -//U3D_B2_ROSC_1 -#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20) -#define RG_SSUSB_RING_OSC_P3_OFST (19) -#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17) -#define RG_SSUSB_RING_OSC_RECAL_OFST (16) -#define RG_SSUSB_RING_OSC_SEL_OFST (8) -#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0) - -//U3D_B2_ROSC_2 -#define RG_SSUSB_RING_DET_STRCYC2_OFST (16) -#define RG_SSUSB_RING_DET_STRCYC1_OFST (0) - -//U3D_B2_ROSC_3 -#define RG_SSUSB_RING_DET_DETWIN1_OFST (16) -#define RG_SSUSB_RING_DET_STRCYC3_OFST (0) - -//U3D_B2_ROSC_4 -#define RG_SSUSB_RING_DET_DETWIN3_OFST (16) -#define RG_SSUSB_RING_DET_DETWIN2_OFST (0) - -//U3D_B2_ROSC_5 -#define RG_SSUSB_RING_DET_LBOND1_OFST (16) -#define RG_SSUSB_RING_DET_UBOND1_OFST (0) - -//U3D_B2_ROSC_6 -#define RG_SSUSB_RING_DET_LBOND2_OFST (16) -#define RG_SSUSB_RING_DET_UBOND2_OFST (0) - -//U3D_B2_ROSC_7 -#define RG_SSUSB_RING_DET_LBOND3_OFST (16) -#define RG_SSUSB_RING_DET_UBOND3_OFST (0) - -//U3D_B2_ROSC_8 -#define RG_SSUSB_RING_RESERVE_OFST (16) -#define RG_SSUSB_ROSC_PROB_SEL_OFST (2) -#define RG_SSUSB_RING_FREQMETER_EN_OFST (1) -#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0) - -//U3D_B2_ROSC_9 -#define RGS_FM_RING_CNT_OFST (16) -#define RGS_SSUSB_RING_OSC_STATE_OFST (10) -#define RGS_SSUSB_RING_OSC_STABLE_OFST (9) -#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8) -#define RGS_SSUSB_RING_OSC_CAL_OFST (0) - -//U3D_B2_ROSC_A -#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0) - -//U3D_PHYD_VERSION -#define RGS_SSUSB_PHYD_VERSION_OFST (0) - -//U3D_PHYD_MODEL -#define RGS_SSUSB_PHYD_MODEL_OFST (0) - - -/////////////////////////////////////////////////////////////////////////////// - -struct sifslv_chip_reg { - PHY_LE32 xtalbias; - PHY_LE32 syspll1; - PHY_LE32 gpio_ctla; - PHY_LE32 gpio_ctlb; - PHY_LE32 gpio_ctlc; -}; - -//U3D_GPIO_CTLA -#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0 - -//U3D_GPIO_CTLB -#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0 - -//U3D_GPIO_CTLC -#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0 - -/* OFFSET */ - -//U3D_GPIO_CTLA -#define RG_C60802_GPIO_CTLA_OFST (0) - -//U3D_GPIO_CTLB -#define RG_C60802_GPIO_CTLB_OFST (0) - -//U3D_GPIO_CTLC -#define RG_C60802_GPIO_CTLC_OFST (0) - -/////////////////////////////////////////////////////////////////////////////// - -struct sifslv_fm_feg { - //0x0 - PHY_LE32 fmcr0; - PHY_LE32 fmcr1; - PHY_LE32 fmcr2; - PHY_LE32 fmmonr0; - //0x10 - PHY_LE32 fmmonr1; -}; - -//U3D_FMCR0 -#define RG_LOCKTH (0xf<<28) //31:28 -#define RG_MONCLK_SEL (0x3<<26) //27:26 -#define RG_FM_MODE (0x1<<25) //25:25 -#define RG_FREQDET_EN (0x1<<24) //24:24 -#define RG_CYCLECNT (0xffffff<<0) //23:0 - -//U3D_FMCR1 -#define RG_TARGET (0xffffffff<<0) //31:0 - -//U3D_FMCR2 -#define RG_OFFSET (0xffffffff<<0) //31:0 - -//U3D_FMMONR0 -#define USB_FM_OUT (0xffffffff<<0) //31:0 - -//U3D_FMMONR1 -#define RG_MONCLK_SEL_3 (0x1<<9) //9:9 -#define RG_FRCK_EN (0x1<<8) //8:8 -#define USBPLL_LOCK (0x1<<1) //1:1 -#define USB_FM_VLD (0x1<<0) //0:0 - - -/* OFFSET */ - -//U3D_FMCR0 -#define RG_LOCKTH_OFST (28) -#define RG_MONCLK_SEL_OFST (26) -#define RG_FM_MODE_OFST (25) -#define RG_FREQDET_EN_OFST (24) -#define RG_CYCLECNT_OFST (0) - -//U3D_FMCR1 -#define RG_TARGET_OFST (0) - -//U3D_FMCR2 -#define RG_OFFSET_OFST (0) - -//U3D_FMMONR0 -#define USB_FM_OUT_OFST (0) - -//U3D_FMMONR1 -#define RG_MONCLK_SEL_3_OFST (9) -#define RG_FRCK_EN_OFST (8) -#define USBPLL_LOCK_OFST (1) -#define USB_FM_VLD_OFST (0) - - -/////////////////////////////////////////////////////////////////////////////// - -PHY_INT32 phy_init(struct u3phy_info *info); -PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); -PHY_INT32 eyescan_init(struct u3phy_info *info); -PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y - , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); -PHY_INT32 u2_save_cur_en(struct u3phy_info *info); -PHY_INT32 u2_save_cur_re(struct u3phy_info *info); -PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info); - -#endif -#endif diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c b/target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c deleted file mode 100644 index ebaf7c8b15..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c +++ /dev/null @@ -1,58 +0,0 @@ -#include "mtk-phy.h" -#ifdef CONFIG_U3D_HAL_SUPPORT -#include "mu3d_hal_osal.h" -#endif - -#ifdef CONFIG_U3_PHY_AHB_SUPPORT -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/slab.h> - -#ifndef CONFIG_U3D_HAL_SUPPORT -#define os_writel(addr,data) {\ - (*((volatile PHY_UINT32*)(addr)) = data);\ - } -#define os_readl(addr) *((volatile PHY_UINT32*)(addr)) -#define os_writelmsk(addr, data, msk) \ - { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \ - } -#define os_setmsk(addr, msk) \ - { os_writel(addr, os_readl(addr) | msk); \ - } -#define os_clrmsk(addr, msk) \ - { os_writel(addr, os_readl(addr) &~ msk); \ - } -/*msk the data first, then umsk with the umsk.*/ -#define os_writelmskumsk(addr, data, msk, umsk) \ -{\ - os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\ -} - -#endif - -PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data) -{ - os_writel(addr, data); - - return 0; -} - -PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr) -{ - return os_readl(addr); -} - -PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data) -{ - os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8)); - - return 0; -} - -PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr) -{ - return ((os_readl(addr)>>((addr%4)*8))&0xff); -} - -#endif - diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy.c b/target/linux/ramips/files/drivers/usb/host/mtk-phy.c deleted file mode 100644 index 7ed8f015b8..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy.c +++ /dev/null @@ -1,102 +0,0 @@ -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#define U3_PHY_LIB -#include "mtk-phy.h" -#ifdef CONFIG_PROJECT_7621 -#include "mtk-phy-7621.h" -#endif -#ifdef CONFIG_PROJECT_PHY -static struct u3phy_operator project_operators = { - .init = phy_init, - .change_pipe_phase = phy_change_pipe_phase, - .eyescan_init = eyescan_init, - .eyescan = phy_eyescan, - .u2_slew_rate_calibration = u2_slew_rate_calibration, -}; -#endif - - -PHY_INT32 u3phy_init(){ -#ifndef CONFIG_PROJECT_PHY - PHY_INT32 u3phy_version; -#endif - - if(u3phy != NULL){ - return PHY_TRUE; - } - - u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); -#endif -#ifdef CONFIG_U3_PHY_GPIO_SUPPORT - u3phy->phyd_version_addr = 0x2000e4; -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - u3phy_p1->phyd_version_addr = 0x2000e4; -#endif -#else - u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4; -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4; -#endif -#endif - -#ifdef CONFIG_PROJECT_PHY - - u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE; - u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE; - u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE; - u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE; - u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE; - u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; - u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; - u3phy_ops = &project_operators; - -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1; - u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1; - u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1; - u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1; - u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1; - u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; - u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; -#endif -#endif - - return PHY_TRUE; -} - -PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ - PHY_INT8 cur_value; - PHY_INT8 new_value; - - cur_value = U3PhyReadReg8(addr); - new_value = (cur_value & (~mask)) | (value << offset); - //udelay(i2cdelayus); - U3PhyWriteReg8(addr, new_value); - return PHY_TRUE; -} - -PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ - PHY_INT32 cur_value; - PHY_INT32 new_value; - - cur_value = U3PhyReadReg32(addr); - new_value = (cur_value & (~mask)) | ((value << offset) & mask); - U3PhyWriteReg32(addr, new_value); - //DRV_MDELAY(100); - - return PHY_TRUE; -} - -PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){ - - return ((U3PhyReadReg8(addr) & mask) >> offset); -} - -PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){ - - return ((U3PhyReadReg32(addr) & mask) >> offset); -} - diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy.h b/target/linux/ramips/files/drivers/usb/host/mtk-phy.h deleted file mode 100644 index 07ed410412..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy.h +++ /dev/null @@ -1,179 +0,0 @@ -#ifndef __MTK_PHY_NEW_H -#define __MTK_PHY_NEW_H - -//#define CONFIG_U3D_HAL_SUPPORT - -/* include system library */ -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/delay.h> - -/* Choose PHY R/W implementation */ -//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO -#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC - -/* Choose PHY version */ -//Select your project by defining one of the followings -#define CONFIG_PROJECT_7621 //7621 -#define CONFIG_PROJECT_PHY - -/* BASE ADDRESS DEFINE, should define this on ASIC */ -#define PHY_BASE 0xBE1D0000 -#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100) -#define SIFSLV_CHIP_BASE (PHY_BASE+0x700) -#define U2_PHY_BASE (PHY_BASE+0x800) -#define U3_PHYD_BASE (PHY_BASE+0x900) -#define U3_PHYD_B2_BASE (PHY_BASE+0xa00) -#define U3_PHYA_BASE (PHY_BASE+0xb00) -#define U3_PHYA_DA_BASE (PHY_BASE+0xc00) - -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100) -#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700) -#define U2_PHY_BASE_P1 (PHY_BASE+0x1000) -#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100) -#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200) -#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300) -#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400) -#endif - -/* - -0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg -0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc -0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28 -0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28 -0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28 -0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28 -0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28 -*/ - - -/* TYPE DEFINE */ -typedef unsigned int PHY_UINT32; -typedef int PHY_INT32; -typedef unsigned short PHY_UINT16; -typedef short PHY_INT16; -typedef unsigned char PHY_UINT8; -typedef char PHY_INT8; - -typedef PHY_UINT32 __bitwise PHY_LE32; - -/* CONSTANT DEFINE */ -#define PHY_FALSE 0 -#define PHY_TRUE 1 - -/* MACRO DEFINE */ -#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data)) -#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr)) - -#define DRV_MDELAY mdelay -#define DRV_MSLEEP msleep -#define DRV_UDELAY udelay -#define DRV_USLEEP usleep - -/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */ -PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data); -PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr); -PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data); -PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr); - -/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */ -PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); -PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); -PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); -PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); - -struct u3phy_info { - PHY_INT32 phy_version; - PHY_INT32 phyd_version_addr; - -#ifdef CONFIG_PROJECT_PHY - struct u2phy_reg *u2phy_regs; - struct u3phya_reg *u3phya_regs; - struct u3phya_da_reg *u3phya_da_regs; - struct u3phyd_reg *u3phyd_regs; - struct u3phyd_bank2_reg *u3phyd_bank2_regs; - struct sifslv_chip_reg *sifslv_chip_regs; - struct sifslv_fm_feg *sifslv_fm_regs; -#endif -}; - -struct u3phy_operator { - PHY_INT32 (*init) (struct u3phy_info *info); - PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); - PHY_INT32 (*eyescan_init) (struct u3phy_info *info); - PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); - PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info); - PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info); - PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info); -}; - -#ifdef U3_PHY_LIB -#define AUTOEXT -#else -#define AUTOEXT extern -#endif - -AUTOEXT struct u3phy_info *u3phy; -AUTOEXT struct u3phy_info *u3phy_p1; -AUTOEXT struct u3phy_operator *u3phy_ops; - -/*********eye scan required*********/ - -#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF)) -#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8)) - -typedef enum -{ - SCAN_UP, - SCAN_DN -} enumScanDir; - -struct strucScanRegion -{ - PHY_INT8 bX_tl; - PHY_INT8 bY_tl; - PHY_INT8 bX_br; - PHY_INT8 bY_br; - PHY_INT8 bDeltaX; - PHY_INT8 bDeltaY; -}; - -struct strucTestCycle -{ - PHY_UINT16 wEyeCnt; - PHY_INT8 bNumOfEyeCnt; - PHY_INT8 bPICalEn; - PHY_INT8 bNumOfIgnoreCnt; -}; - -#define ERRCNT_MAX 128 -#define CYCLE_COUNT_MAX 15 - -/// the map resolution is 128 x 128 pts -#define MAX_X 127 -#define MAX_Y 127 -#define MIN_X 0 -#define MIN_Y 0 - -PHY_INT32 u3phy_init(void); - -AUTOEXT struct strucScanRegion _rEye1; -AUTOEXT struct strucScanRegion _rEye2; -AUTOEXT struct strucTestCycle _rTestCycle; -AUTOEXT PHY_UINT8 _bXcurr; -AUTOEXT PHY_UINT8 _bYcurr; -AUTOEXT enumScanDir _eScanDir; -AUTOEXT PHY_INT8 _fgXChged; -AUTOEXT PHY_INT8 _bPIResult; -/* use local variable instead to save memory use */ -#if 0 -AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; -AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; -#endif - -/***********************************/ -#endif - diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c deleted file mode 100644 index 9d9352678e..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c +++ /dev/null @@ -1,115 +0,0 @@ -#include "xhci-mtk.h" -#include "xhci-mtk-power.h" -#include "xhci.h" -#include <linux/kernel.h> /* printk() */ -#include <linux/slab.h> -#include <linux/delay.h> - -static int g_num_u3_port; -static int g_num_u2_port; - - -void enableXhciAllPortPower(struct xhci_hcd *xhci){ - int i; - u32 port_id, temp; - u32 __iomem *addr; - - g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); - g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); - - for(i=1; i<=g_num_u3_port; i++){ - port_id=i; - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); - temp = xhci_readl(xhci, addr); - temp = xhci_port_state_to_neutral(temp); - temp |= PORT_POWER; - xhci_writel(xhci, temp, addr); - } - for(i=1; i<=g_num_u2_port; i++){ - port_id=i+g_num_u3_port; - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); - temp = xhci_readl(xhci, addr); - temp = xhci_port_state_to_neutral(temp); - temp |= PORT_POWER; - xhci_writel(xhci, temp, addr); - } -} - -void enableAllClockPower(){ - - int i; - u32 temp; - - g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); - g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); - - //2. Enable xHC - writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); - writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); - writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); - - //1. Enable target ports - for(i=0; i<g_num_u3_port; i++){ - temp = readl(SSUSB_U3_CTRL(i)); - temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS); - writel(temp, SSUSB_U3_CTRL(i)); - } - for(i=0; i<g_num_u2_port; i++){ - temp = readl(SSUSB_U2_CTRL(i)); - temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS); - writel(temp, SSUSB_U2_CTRL(i)); - } - msleep(100); -} - - -//(X)disable clock/power of a port -//(X)if all ports are disabled, disable IP ctrl power -//disable all ports and IP clock/power, this is just mention HW that the power/clock of port -//and IP could be disable if suspended. -//If doesn't not disable all ports at first, the IP clock/power will never be disabled -//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time -//port_index: port number -//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed) -void disablePortClockPower(void){ - int i; - u32 temp; - - g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); - g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); - - for(i=0; i<g_num_u3_port; i++){ - temp = readl(SSUSB_U3_CTRL(i)); - temp = temp | (SSUSB_U3_PORT_PDN); - writel(temp, SSUSB_U3_CTRL(i)); - } - for(i=0; i<g_num_u2_port; i++){ - temp = readl(SSUSB_U2_CTRL(i)); - temp = temp | (SSUSB_U2_PORT_PDN); - writel(temp, SSUSB_U2_CTRL(i)); - } - writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); -} - -//if IP ctrl power is disabled, enable it -//enable clock/power of a port -//port_index: port number -//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed) -void enablePortClockPower(int port_index, int port_rev){ - int i; - u32 temp; - - writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); - - if(port_rev == 0x3){ - temp = readl(SSUSB_U3_CTRL(port_index)); - temp = temp & (~SSUSB_U3_PORT_PDN); - writel(temp, SSUSB_U3_CTRL(port_index)); - } - else if(port_rev == 0x2){ - temp = readl(SSUSB_U2_CTRL(port_index)); - temp = temp & (~SSUSB_U2_PORT_PDN); - writel(temp, SSUSB_U2_CTRL(port_index)); - } -} - diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.h b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.h deleted file mode 100644 index e57c243f56..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _XHCI_MTK_POWER_H -#define _XHCI_MTK_POWER_H - -#include <linux/usb.h> -#include "xhci.h" -#include "xhci-mtk.h" - -void enableXhciAllPortPower(struct xhci_hcd *xhci); -void enableAllClockPower(void); -void disablePortClockPower(void); -void enablePortClockPower(int port_index, int port_rev); - -#endif diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c deleted file mode 100644 index bf6a8bdc19..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c +++ /dev/null @@ -1,608 +0,0 @@ -#include "xhci-mtk-scheduler.h" -#include <linux/kernel.h> /* printk() */ - -static struct sch_ep **ss_out_eps[MAX_EP_NUM]; -static struct sch_ep **ss_in_eps[MAX_EP_NUM]; -static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc -static struct sch_ep **tt_intr_eps[MAX_EP_NUM]; - - -int mtk_xhci_scheduler_init(void){ - int i; - - for(i=0; i<MAX_EP_NUM; i++){ - ss_out_eps[i] = NULL; - } - for(i=0; i<MAX_EP_NUM; i++){ - ss_in_eps[i] = NULL; - } - for(i=0; i<MAX_EP_NUM; i++){ - hs_eps[i] = NULL; - } - for(i=0; i<MAX_EP_NUM; i++){ - tt_intr_eps[i] = NULL; - } - return 0; -} - -int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst - , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode - , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){ - - struct sch_ep **ep_array; - int i; - - if(is_in && dev_speed == USB_SPEED_SUPER ){ - ep_array = (struct sch_ep **)ss_in_eps; - } - else if(dev_speed == USB_SPEED_SUPER){ - ep_array = (struct sch_ep **)ss_out_eps; - } - else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){ - ep_array = (struct sch_ep **)hs_eps; - } - else{ - ep_array = (struct sch_ep **)tt_intr_eps; - } - for(i=0; i<MAX_EP_NUM; i++){ - if(ep_array[i] == NULL){ - tmp_ep->dev_speed = dev_speed; - tmp_ep->isTT = isTT; - tmp_ep->is_in = is_in; - tmp_ep->ep_type = ep_type; - tmp_ep->maxp = maxp; - tmp_ep->interval = interval; - tmp_ep->burst = burst; - tmp_ep->mult = mult; - tmp_ep->offset = offset; - tmp_ep->repeat = repeat; - tmp_ep->pkts = pkts; - tmp_ep->cs_count = cs_count; - tmp_ep->burst_mode = burst_mode; - tmp_ep->bw_cost = bw_cost; - tmp_ep->ep = ep; - ep_array[i] = tmp_ep; - return SCH_SUCCESS; - } - } - return SCH_FAIL; -} - -int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat - , int td_size){ - int i, j, k; - int bw_required[3]; - int final_bw_required; - int bw_required_per_repeat; - int tmp_bw_required; - struct sch_ep *cur_sch_ep; - struct sch_ep **ep_array; - int cur_offset; - int cur_ep_offset; - int tmp_offset; - int tmp_interval; - int ep_offset; - int ep_interval; - int ep_repeat; - int ep_mult; - - if(is_in){ - ep_array = (struct sch_ep **)ss_in_eps; - } - else{ - ep_array = (struct sch_ep **)ss_out_eps; - } - - bw_required[0] = 0; - bw_required[1] = 0; - bw_required[2] = 0; - - if(repeat == 0){ - final_bw_required = 0; - for(i=0; i<MAX_EP_NUM; i++){ - cur_sch_ep = ep_array[i]; - if(cur_sch_ep == NULL){ - continue; - } - ep_interval = cur_sch_ep->interval; - ep_offset = cur_sch_ep->offset; - if(cur_sch_ep->repeat == 0){ - if(ep_interval >= interval){ - tmp_offset = ep_offset + ep_interval - offset; - tmp_interval = interval; - } - else{ - tmp_offset = offset + interval - ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset % tmp_interval == 0){ - final_bw_required += cur_sch_ep->bw_cost; - } - } - else{ - ep_repeat = cur_sch_ep->repeat; - ep_mult = cur_sch_ep->mult; - for(k=0; k<=ep_mult; k++){ - cur_ep_offset = ep_offset+(k*ep_mult); - if(ep_interval >= interval){ - tmp_offset = cur_ep_offset + ep_interval - offset; - tmp_interval = interval; - } - else{ - tmp_offset = offset + interval - cur_ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset % tmp_interval == 0){ - final_bw_required += cur_sch_ep->bw_cost; - break; - } - } - } - } - final_bw_required += td_size; - } - else{ - bw_required_per_repeat = maxp * (burst+1); - for(j=0; j<=mult; j++){ - tmp_bw_required = 0; - cur_offset = offset+(j*repeat); - for(i=0; i<MAX_EP_NUM; i++){ - cur_sch_ep = ep_array[i]; - if(cur_sch_ep == NULL){ - continue; - } - ep_interval = cur_sch_ep->interval; - ep_offset = cur_sch_ep->offset; - if(cur_sch_ep->repeat == 0){ - if(ep_interval >= interval){ - tmp_offset = ep_offset + ep_interval - cur_offset; - tmp_interval = interval; - } - else{ - tmp_offset = cur_offset + interval - ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset % tmp_interval == 0){ - tmp_bw_required += cur_sch_ep->bw_cost; - } - } - else{ - ep_repeat = cur_sch_ep->repeat; - ep_mult = cur_sch_ep->mult; - for(k=0; k<=ep_mult; k++){ - cur_ep_offset = ep_offset+(k*ep_repeat); - if(ep_interval >= interval){ - tmp_offset = cur_ep_offset + ep_interval - cur_offset; - tmp_interval = interval; - } - else{ - tmp_offset = cur_offset + interval - cur_ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset % tmp_interval == 0){ - tmp_bw_required += cur_sch_ep->bw_cost; - break; - } - } - } - } - bw_required[j] = tmp_bw_required; - } - final_bw_required = SS_BW_BOUND; - for(j=0; j<=mult; j++){ - if(bw_required[j] < final_bw_required){ - final_bw_required = bw_required[j]; - } - } - final_bw_required += bw_required_per_repeat; - } - return final_bw_required; -} - -int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){ - int i; - int bw_required; - struct sch_ep *cur_sch_ep; - int tmp_offset; - int tmp_interval; - int ep_offset; - int ep_interval; - int cur_tt_isoc_interval; //for isoc tt check - - bw_required = 0; - for(i=0; i<MAX_EP_NUM; i++){ - - cur_sch_ep = (struct sch_ep *)hs_eps[i]; - if(cur_sch_ep == NULL){ - continue; - } - ep_offset = cur_sch_ep->offset; - ep_interval = cur_sch_ep->interval; - - if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ - cur_tt_isoc_interval = ep_interval<<3; - if(ep_interval >= interval){ - tmp_offset = ep_offset + cur_tt_isoc_interval - offset; - tmp_interval = interval; - } - else{ - tmp_offset = offset + interval - ep_offset; - tmp_interval = cur_tt_isoc_interval; - } - if(cur_sch_ep->is_in){ - if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ - bw_required += 188; - } - } - else{ - if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ - bw_required += 188; - } - } - } - else{ - if(ep_interval >= interval){ - tmp_offset = ep_offset + ep_interval - offset; - tmp_interval = interval; - } - else{ - tmp_offset = offset + interval - ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset%tmp_interval == 0){ - bw_required += cur_sch_ep->bw_cost; - } - } - } - bw_required += td_size; - return bw_required; -} - -int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){ - char is_cs; - int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe; - int bw_required, max_bw; - int ss_cs_count; - int cs_mframe; - int max_frame; - int i,j; - struct sch_ep *cur_sch_ep; - int ep_offset; - int ep_interval; - int ep_cs_count; - int tt_isoc_interval; //for isoc tt check - int cur_tt_isoc_interval; //for isoc tt check - int tmp_offset; - int tmp_interval; - - is_cs = 0; - - tt_isoc_interval = interval<<3; //frame to mframe - if(is_in){ - is_cs = 1; - } - s_frame = offset/8; - s_mframe = offset%8; - ss_cs_count = (maxp + (188 - 1))/188; - if(is_cs){ - cs_mframe = offset%8 + 2 + ss_cs_count; - if (cs_mframe <= 6) - ss_cs_count += 2; - else if (cs_mframe == 7) - ss_cs_count++; - else if (cs_mframe > 8) - return -1; - } - max_bw = 0; - if(is_in){ - i=2; - } - for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){ - bw_required = 0; - for(j=0; j<MAX_EP_NUM; j++){ - cur_sch_ep = (struct sch_ep *)hs_eps[j]; - if(cur_sch_ep == NULL){ - continue; - } - ep_offset = cur_sch_ep->offset; - ep_interval = cur_sch_ep->interval; - if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ - //isoc tt - //check if mframe offset overlap - //if overlap, add 188 to the bw - cur_tt_isoc_interval = ep_interval<<3; - if(cur_tt_isoc_interval >= tt_isoc_interval){ - tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe; - tmp_interval = tt_isoc_interval; - } - else{ - tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; - tmp_interval = cur_tt_isoc_interval; - } - if(cur_sch_ep->is_in){ - if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ - bw_required += 188; - } - } - else{ - if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ - bw_required += 188; - } - } - - } - else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){ - //check if mframe - if(ep_interval >= tt_isoc_interval){ - tmp_offset = (ep_offset+ep_interval) - cur_mframe; - tmp_interval = tt_isoc_interval; - } - else{ - tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset%tmp_interval == 0){ - bw_required += cur_sch_ep->bw_cost; - } - } - } - bw_required += 188; - if(bw_required > max_bw){ - max_bw = bw_required; - } - } - return max_bw; -} - -int count_tt_intr_bw(int interval, int frame_offset){ - //check all eps in tt_intr_eps - int ret; - int i,j; - int ep_offset; - int ep_interval; - int tmp_offset; - int tmp_interval; - ret = SCH_SUCCESS; - struct sch_ep *cur_sch_ep; - - for(i=0; i<MAX_EP_NUM; i++){ - cur_sch_ep = (struct sch_ep *)tt_intr_eps[i]; - if(cur_sch_ep == NULL){ - continue; - } - ep_offset = cur_sch_ep->offset; - ep_interval = cur_sch_ep->interval; - if(ep_interval >= interval){ - tmp_offset = ep_offset + ep_interval - frame_offset; - tmp_interval = interval; - } - else{ - tmp_offset = frame_offset + interval - ep_offset; - tmp_interval = ep_interval; - } - - if(tmp_offset%tmp_interval==0){ - return SCH_FAIL; - } - } - return SCH_SUCCESS; -} - -struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){ - int i; - struct sch_ep **ep_array; - struct sch_ep *cur_ep; - - if (is_in && dev_speed == USB_SPEED_SUPER) { - ep_array = (struct sch_ep **)ss_in_eps; - } - else if (dev_speed == USB_SPEED_SUPER) { - ep_array = (struct sch_ep **)ss_out_eps; - } - else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) { - ep_array = (struct sch_ep **)hs_eps; - } - else { - ep_array = (struct sch_ep **)tt_intr_eps; - } - for (i = 0; i < MAX_EP_NUM; i++) { - cur_ep = (struct sch_ep *)ep_array[i]; - if(cur_ep != NULL && cur_ep->ep == ep){ - ep_array[i] = NULL; - return cur_ep; - } - } - return NULL; -} - -int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst - , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){ - mtk_u32 bPkts = 0; - mtk_u32 bCsCount = 0; - mtk_u32 bBm = 1; - mtk_u32 bOffset = 0; - mtk_u32 bRepeat = 0; - int ret; - struct mtk_xhci_ep_ctx *temp_ep_ctx; - int td_size; - int mframe_idx, frame_idx; - int bw_cost; - int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat; - int cur_offset, cs_mframe; - int break_out; - int frame_interval; - - printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp - , interval, burst, mult, ep, ep_ctx, sch_ep); - if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){ - frame_interval = interval >> 3; - for(frame_idx=0; frame_idx<frame_interval; frame_idx++){ - printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx); - if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){ - printk(KERN_ERR "check OK............\n"); - bOffset = frame_idx<<3; - bPkts = 1; - bCsCount = 3; - bw_cost = maxp; - bRepeat = 0; - if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult - , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){ - return SCH_FAIL; - } - ret = SCH_SUCCESS; - break; - } - } - } - else if(isTT && ep_type == USB_EP_ISOC){ - best_bw = HS_BW_BOUND; - best_bw_idx = -1; - cur_bw = 0; - td_size = maxp; - break_out = 0; - frame_interval = interval>>3; - for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){ - for(mframe_idx=0; mframe_idx<8; mframe_idx++){ - cur_offset = (frame_idx*8) + mframe_idx; - cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size); - if(cur_bw > 0 && cur_bw < best_bw){ - best_bw_idx = cur_offset; - best_bw = cur_bw; - if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ - break_out = 1; - break; - } - } - } - } - if(best_bw_idx == -1){ - return SCH_FAIL; - } - else{ - bOffset = best_bw_idx; - bPkts = 1; - bCsCount = (maxp + (188 - 1)) / 188; - if(is_in){ - cs_mframe = bOffset%8 + 2 + bCsCount; - if (cs_mframe <= 6) - bCsCount += 2; - else if (cs_mframe == 7) - bCsCount++; - } - bw_cost = 188; - bRepeat = 0; - if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult - , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ - return SCH_FAIL; - } - ret = SCH_SUCCESS; - } - } - else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){ - bPkts = 1; - ret = SCH_SUCCESS; - } - else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){ - bPkts = 1; - ret = SCH_SUCCESS; - } - else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ - best_bw = HS_BW_BOUND; - best_bw_idx = -1; - cur_bw = 0; - td_size = maxp*(burst+1); - for(cur_offset = 0; cur_offset<interval; cur_offset++){ - cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size); - if(cur_bw > 0 && cur_bw < best_bw){ - best_bw_idx = cur_offset; - best_bw = cur_bw; - if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ - break; - } - } - } - if(best_bw_idx == -1){ - return SCH_FAIL; - } - else{ - bOffset = best_bw_idx; - bPkts = burst + 1; - bCsCount = 0; - bw_cost = td_size; - bRepeat = 0; - if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult - , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ - return SCH_FAIL; - } - ret = SCH_SUCCESS; - } - } - else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ - best_bw = SS_BW_BOUND; - best_bw_idx = -1; - cur_bw = 0; - td_size = maxp * (mult+1) * (burst+1); - if(mult == 0){ - max_repeat = 0; - } - else{ - max_repeat = (interval-1)/(mult+1); - } - break_out = 0; - for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){ - for(repeat = max_repeat; repeat >= 0; repeat--){ - cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx - , repeat, td_size); - printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n" - , frame_idx, repeat, td_size, cur_bw); - if(cur_bw > 0 && cur_bw < best_bw){ - best_bw_idx = frame_idx; - best_bw_repeat = repeat; - best_bw = cur_bw; - if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){ - break_out = 1; - break; - } - } - } - } - printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat); - if(best_bw_idx == -1){ - return SCH_FAIL; - } - else{ - bOffset = best_bw_idx; - bCsCount = 0; - bRepeat = best_bw_repeat; - if(bRepeat == 0){ - bw_cost = (burst+1)*(mult+1)*maxp; - bPkts = (burst+1)*(mult+1); - } - else{ - bw_cost = (burst+1)*maxp; - bPkts = (burst+1); - } - if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult - , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ - return SCH_FAIL; - } - ret = SCH_SUCCESS; - } - } - else{ - bPkts = 1; - ret = SCH_SUCCESS; - } - if(ret == SCH_SUCCESS){ - temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx; - temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm)); - temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat)); - - printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm); - printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat); - return SCH_SUCCESS; - } - else{ - return SCH_FAIL; - } -} diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h deleted file mode 100644 index c55dfb10da..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _XHCI_MTK_SCHEDULER_H -#define _XHCI_MTK_SCHEDULER_H - -#define MTK_SCH_NEW 1 - -#define SCH_SUCCESS 1 -#define SCH_FAIL 0 - -#define MAX_EP_NUM 64 -#define SS_BW_BOUND 51000 -#define HS_BW_BOUND 6144 - -#define USB_EP_CONTROL 0 -#define USB_EP_ISOC 1 -#define USB_EP_BULK 2 -#define USB_EP_INT 3 - -#define USB_SPEED_LOW 1 -#define USB_SPEED_FULL 2 -#define USB_SPEED_HIGH 3 -#define USB_SPEED_SUPER 5 - -/* mtk scheduler bitmasks */ -#define BPKTS(p) ((p) & 0x3f) -#define BCSCOUNT(p) (((p) & 0x7) << 8) -#define BBM(p) ((p) << 11) -#define BOFFSET(p) ((p) & 0x3fff) -#define BREPEAT(p) (((p) & 0x7fff) << 16) - - -#if 1 -typedef unsigned int mtk_u32; -typedef unsigned long long mtk_u64; -#endif - -#define NULL ((void *)0) - -struct mtk_xhci_ep_ctx { - mtk_u32 ep_info; - mtk_u32 ep_info2; - mtk_u64 deq; - mtk_u32 tx_info; - /* offset 0x14 - 0x1f reserved for HC internal use */ - mtk_u32 reserved[3]; -}; - - -struct sch_ep -{ - //device info - int dev_speed; - int isTT; - //ep info - int is_in; - int ep_type; - int maxp; - int interval; - int burst; - int mult; - //scheduling info - int offset; - int repeat; - int pkts; - int cs_count; - int burst_mode; - //other - int bw_cost; //bandwidth cost in each repeat; including overhead - mtk_u32 *ep; //address of usb_endpoint pointer -}; - -int mtk_xhci_scheduler_init(void); -int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst - , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep); -struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep); - - -#endif diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk.c b/target/linux/ramips/files/drivers/usb/host/xhci-mtk.c deleted file mode 100644 index 2eed0a174a..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk.c +++ /dev/null @@ -1,265 +0,0 @@ -#include "xhci-mtk.h" -#include "xhci-mtk-power.h" -#include "xhci.h" -#include "mtk-phy.h" -#ifdef CONFIG_C60802_SUPPORT -#include "mtk-phy-c60802.h" -#endif -#include "xhci-mtk-scheduler.h" -#include <linux/kernel.h> /* printk() */ -#include <linux/slab.h> -#include <linux/delay.h> -#include <asm/uaccess.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -void setInitialReg(void ) -{ - __u32 __iomem *addr; - u32 temp; - - /* set SSUSB DMA burst size to 128B */ - addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG; - temp = SSUSB_HDMA_CFG_MT7621_VALUE; - writel(temp, addr); - - /* extend U3 LTSSM Polling.LFPS timeout value */ - addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3; - temp = U3_LTSSM_TIMING_PARAMETER3_VALUE; - writel(temp, addr); - - /* EOF */ - addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF; - temp = SYNC_HS_EOF_VALUE; - writel(temp, addr); - -#if defined (CONFIG_PERIODIC_ENP) - /* HSCH_CFG1: SCH2_FIFO_DEPTH */ - addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1; - temp = readl(addr); - temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET); - writel(temp, addr); -#endif - - /* Doorbell handling */ - addr = SIFSLV_IPPC + SSUSB_IP_SPAR0; - temp = 0x1; - writel(temp, addr); - - /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */ - /* Port 0 */ - addr = U2_PHY_BASE + U2_PHYD_CR1; - temp = readl(addr); - temp &= ~(0x3 << 18); - temp |= (1 << 18); - writel(temp, addr); - - /* Port 1 */ - addr = U2_PHY_BASE_P1 + U2_PHYD_CR1; - temp = readl(addr); - temp &= ~(0x3 << 18); - temp |= (1 << 18); - writel(temp, addr); -} - - -void setLatchSel(void){ - __u32 __iomem *latch_sel_addr; - u32 latch_sel_value; - latch_sel_addr = U3_PIPE_LATCH_SEL_ADD; - latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX); - writel(latch_sel_value, latch_sel_addr); -} - -void reinitIP(void){ - __u32 __iomem *ip_reset_addr; - u32 ip_reset_value; - - enableAllClockPower(); - mtk_xhci_scheduler_init(); -} - -void dbg_prb_out(void){ - mtk_probe_init(0x0f0f0f0f); - mtk_probe_out(0xffffffff); - mtk_probe_out(0x01010101); - mtk_probe_out(0x02020202); - mtk_probe_out(0x04040404); - mtk_probe_out(0x08080808); - mtk_probe_out(0x10101010); - mtk_probe_out(0x20202020); - mtk_probe_out(0x40404040); - mtk_probe_out(0x80808080); - mtk_probe_out(0x55555555); - mtk_probe_out(0xaaaaaaaa); -} - - - -/////////////////////////////////////////////////////////////////////////////// - -#define RET_SUCCESS 0 -#define RET_FAIL 1 - -static int dbg_u3w(int argc, char**argv) -{ - int u4TimingValue; - char u1TimingValue; - int u4TimingAddress; - - if (argc<3) - { - printk(KERN_ERR "Arg: address value\n"); - return RET_FAIL; - } - u3phy_init(); - - u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); - u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16); - u1TimingValue = u4TimingValue & 0xff; - /* access MMIO directly */ - writel(u1TimingValue, u4TimingAddress); - printk(KERN_ERR "Write done\n"); - return RET_SUCCESS; - -} - -static int dbg_u3r(int argc, char**argv) -{ - char u1ReadTimingValue; - int u4TimingAddress; - if (argc<2) - { - printk(KERN_ERR "Arg: address\n"); - return 0; - } - u3phy_init(); - mdelay(500); - u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); - /* access MMIO directly */ - u1ReadTimingValue = readl(u4TimingAddress); - printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue); - return 0; -} - -static int dbg_u3init(int argc, char**argv) -{ - int ret; - ret = u3phy_init(); - printk(KERN_ERR "phy registers and operations initial done\n"); - if(u3phy_ops->u2_slew_rate_calibration){ - u3phy_ops->u2_slew_rate_calibration(u3phy); - } - else{ - printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); - } - if(u3phy_ops->init(u3phy) == PHY_TRUE) - return RET_SUCCESS; - return RET_FAIL; -} - -void dbg_setU1U2(int argc, char**argv){ - struct xhci_hcd *xhci; - int u1_value; - int u2_value; - u32 port_id, temp; - u32 __iomem *addr; - - if (argc<3) - { - printk(KERN_ERR "Arg: u1value u2value\n"); - return RET_FAIL; - } - - u1_value = (int)simple_strtol(argv[1], &argv[1], 10); - u2_value = (int)simple_strtol(argv[2], &argv[2], 10); - addr = (SSUSB_U3_XHCI_BASE + 0x424); - temp = readl(addr); - temp = temp & (~(0x0000ffff)); - temp = temp | u1_value | (u2_value<<8); - writel(temp, addr); -} -/////////////////////////////////////////////////////////////////////////////// - -int call_function(char *buf) -{ - int i; - int argc; - char *argv[80]; - - argc = 0; - do - { - argv[argc] = strsep(&buf, " "); - printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]); - argc++; - } while (buf); - if (!strcmp("dbg.r", argv[0])) - dbg_prb_out(); - else if (!strcmp("dbg.u3w", argv[0])) - dbg_u3w(argc, argv); - else if (!strcmp("dbg.u3r", argv[0])) - dbg_u3r(argc, argv); - else if (!strcmp("dbg.u3i", argv[0])) - dbg_u3init(argc, argv); - else if (!strcmp("pw.u1u2", argv[0])) - dbg_setU1U2(argc, argv); - return 0; -} - -long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - char w_buf[200]; - char r_buf[200] = "this is a test"; - int len = 200; - - switch (cmd) { - case IOCTL_READ: - copy_to_user((char *) arg, r_buf, len); - printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf); - break; - case IOCTL_WRITE: - copy_from_user(w_buf, (char *) arg, len); - printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf); - - //invoke function - return call_function(w_buf); - break; - default: - return -ENOTTY; - } - - return len; -} - -int xhci_mtk_test_open(struct inode *inode, struct file *file) -{ - - printk(KERN_DEBUG "xhci_mtk_test open: successful\n"); - return 0; -} - -int xhci_mtk_test_release(struct inode *inode, struct file *file) -{ - - printk(KERN_DEBUG "xhci_mtk_test release: successful\n"); - return 0; -} - -ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr) -{ - - printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n"); - return 0; -} - -ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos) -{ - - printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n"); - return 0; -} - - - - diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk.h b/target/linux/ramips/files/drivers/usb/host/xhci-mtk.h deleted file mode 100644 index 0f2d5e834c..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk.h +++ /dev/null @@ -1,120 +0,0 @@ -#ifndef _XHCI_MTK_H -#define _XHCI_MTK_H - -#include <linux/usb.h> -#include "xhci.h" - -#define SSUSB_U3_XHCI_BASE 0xBE1C0000 -#define SSUSB_U3_MAC_BASE 0xBE1C2400 -#define SSUSB_U3_SYS_BASE 0xBE1C2600 -#define SSUSB_U2_SYS_BASE 0xBE1C3400 -#define SSUB_SIF_SLV_TOP 0xBE1D0000 -#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700) - -#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130 -#define U3_PIPE_LATCH_TX 0 -#define U3_PIPE_LATCH_RX 0 - -#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0 -#define U3_REF_CK_PAR 0xb0 -#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8 -#define U3_RX_UX_EXIT_LFPS_REF 3 -#define U3_REF_CK_VAL 10 - -#define U3_TIMING_PULSE_CTRL 0xb4 -#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125 - -#define USB20_TIMING_PARAMETER 0x40 -#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125 - -#define LINK_PM_TIMER 0x8 -#define PM_LC_TIMEOUT_VALUE 3 - -#define XHCI_IMOD 0x624 -#define XHCI_IMOD_MT7621_VALUE 0x10 - -#define SSUSB_HDMA_CFG 0x950 -#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C - -#define U3_LTSSM_TIMING_PARAMETER3 0x2514 -#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C - -#define U2_PHYD_CR1 0x64 - -#define SSUSB_IP_SPAR0 0xC8 - -#define SYNC_HS_EOF 0x938 -#define SYNC_HS_EOF_VALUE 0x201F3 - -#define HSCH_CFG1 0x960 -#define SCH2_FIFO_DEPTH_OFFSET 16 - - -#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0) -#define SSUSB_IP_SW_RST (1<<0) -#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4) -#define SSUSB_IP_PDN (1<<0) -#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08)) -#define SSUSB_U3_PORT_DIS (1<<0) -#define SSUSB_U3_PORT_PDN (1<<1) -#define SSUSB_U3_PORT_HOST_SEL (1<<2) -#define SSUSB_U3_PORT_CKBG_EN (1<<3) -#define SSUSB_U3_PORT_MAC_RST (1<<4) -#define SSUSB_U3_PORT_PHYD_RST (1<<5) -#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08)) -#define SSUSB_U2_PORT_DIS (1<<0) -#define SSUSB_U2_PORT_PDN (1<<1) -#define SSUSB_U2_PORT_HOST_SEL (1<<2) -#define SSUSB_U2_PORT_CKBG_EN (1<<3) -#define SSUSB_U2_PORT_MAC_RST (1<<4) -#define SSUSB_U2_PORT_PHYD_RST (1<<5) -#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024) - -#define SSUSB_U3_PORT_NUM(p) (p & 0xff) -#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff) - - -#define XHCI_MTK_TEST_MAJOR 234 -#define DEVICE_NAME "xhci_mtk_test" - -#define CLI_MAGIC 'CLI' -#define IOCTL_READ _IOR(CLI_MAGIC, 0, int) -#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int) - -void reinitIP(void); -void setInitialReg(void); -void dbg_prb_out(void); -int call_function(char *buf); - -long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); -int xhci_mtk_test_open(struct inode *inode, struct file *file); -int xhci_mtk_test_release(struct inode *inode, struct file *file); -ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr); -ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos); - -/* - mediatek probe out -*/ -/************************************************************************************/ - -#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0) -#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc) - -static inline void mtk_probe_init(const u32 byte){ - __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR; - writel(byte, ptr); -} - -static inline void mtk_probe_out(const u32 value){ - __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; - writel(value, ptr); -} - -static inline u32 mtk_probe_value(void){ - __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; - - return readl(ptr); -} - - -#endif |