aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips')
-rw-r--r--target/linux/ramips/dts/mt7628an_netgear_r6020.dts133
-rw-r--r--target/linux/ramips/dts/mt7628an_netgear_r6080.dts86
-rw-r--r--target/linux/ramips/dts/mt7628an_netgear_r6120.dts93
-rw-r--r--target/linux/ramips/dts/mt7628an_netgear_r6xxx.dtsi73
-rw-r--r--target/linux/ramips/image/Makefile2
-rw-r--r--target/linux/ramips/image/mt7621.mk2
-rw-r--r--target/linux/ramips/image/mt76x8.mk45
7 files changed, 151 insertions, 283 deletions
diff --git a/target/linux/ramips/dts/mt7628an_netgear_r6020.dts b/target/linux/ramips/dts/mt7628an_netgear_r6020.dts
index 83a751c2f7..b0be381eca 100644
--- a/target/linux/ramips/dts/mt7628an_netgear_r6020.dts
+++ b/target/linux/ramips/dts/mt7628an_netgear_r6020.dts
@@ -1,10 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7628an_netgear_r6xxx.dtsi"
/ {
compatible = "netgear,r6020", "mediatek,mt7628an-soc";
@@ -17,16 +14,6 @@
led-upgrade = &led_power;
};
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
leds {
compatible = "gpio-leds";
@@ -65,101 +52,47 @@
&state_default {
gpio {
- groups = "p0led_an", "p1led_an", "p2led_an",
- "p3led_an", "p4led_an", "wdt",
- "wled_an";
+ groups = "p0led_an", "p1led_an", "p2led_an", "p3led_an",
+ "p4led_an", "wdt", "wled_an";
function = "gpio";
};
};
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <86000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "nvram";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- partition@90000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x90000 0x6f0000>;
- };
-
- partition@780000 {
- label = "ML";
- reg = <0x780000 0x20000>;
- read-only;
- };
-
- partition@7a0000 {
- label = "ML1";
- reg = <0x7a0000 0x20000>;
- read-only;
- };
-
- partition@7c0000 {
- label = "ML2";
- reg = <0x7c0000 0x20000>;
- read-only;
- };
-
- partition@7e0000 {
- label = "POT";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- partition@7f0000 {
- label = "reserved";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
+&partitions {
+ partition@90000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x90000 0x6f0000>;
};
-};
-&wmac {
- status = "okay";
-};
+ partition@780000 {
+ label = "ML";
+ reg = <0x780000 0x20000>;
+ read-only;
+ };
-&ethernet {
- mtd-mac-address = <&factory 0x4>;
-};
+ partition@7a0000 {
+ label = "ML1";
+ reg = <0x7a0000 0x20000>;
+ read-only;
+ };
-&pcie {
- status = "okay";
-};
+ partition@7c0000 {
+ label = "ML2";
+ reg = <0x7c0000 0x20000>;
+ read-only;
+ };
+
+ partition@7e0000 {
+ label = "POT";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
+ partition@7f0000 {
+ label = "reserved";
+ reg = <0x7f0000 0x10000>;
+ read-only;
};
};
diff --git a/target/linux/ramips/dts/mt7628an_netgear_r6080.dts b/target/linux/ramips/dts/mt7628an_netgear_r6080.dts
index 5bca023c71..b56bab8b41 100644
--- a/target/linux/ramips/dts/mt7628an_netgear_r6080.dts
+++ b/target/linux/ramips/dts/mt7628an_netgear_r6080.dts
@@ -1,10 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7628an_netgear_r6xxx.dtsi"
/ {
compatible = "netgear,r6080", "mediatek,mt7628an-soc";
@@ -18,16 +15,6 @@
label-mac-device = &ethernet;
};
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
leds {
compatible = "gpio-leds";
@@ -72,70 +59,17 @@
};
};
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <86000000>;
- m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "nvram";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- partition@90000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x90000 0x760000>;
- };
-
- partition@7f0000 {
- label = "reserved";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
+&partitions {
+ partition@90000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x90000 0x760000>;
};
-};
-
-&wmac {
- status = "okay";
-};
-
-&ethernet {
- mtd-mac-address = <&factory 0x4>;
-};
-
-&pcie {
- status = "okay";
-};
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
+ partition@7f0000 {
+ label = "reserved";
+ reg = <0x7f0000 0x10000>;
+ read-only;
};
};
diff --git a/target/linux/ramips/dts/mt7628an_netgear_r6120.dts b/target/linux/ramips/dts/mt7628an_netgear_r6120.dts
index 191538100c..51e51db3ec 100644
--- a/target/linux/ramips/dts/mt7628an_netgear_r6120.dts
+++ b/target/linux/ramips/dts/mt7628an_netgear_r6120.dts
@@ -1,9 +1,6 @@
/dts-v1/;
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7628an_netgear_r6xxx.dtsi"
/ {
compatible = "netgear,r6120", "mediatek,mt7628an-soc";
@@ -17,16 +14,6 @@
label-mac-device = &ethernet;
};
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
leds {
compatible = "gpio-leds";
@@ -77,77 +64,27 @@
&state_default {
gpio {
- groups = "p0led_an", "p1led_an", "p2led_an",
- "p3led_an", "p4led_an", "wdt",
- "wled_an", "uart1";
+ groups = "p0led_an", "p1led_an", "p2led_an", "p3led_an",
+ "p4led_an", "wdt", "wled_an", "uart1";
function = "gpio";
};
};
-&spi0 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- partition@60000 {
- label = "nvram";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- partition@90000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x90000 0xf60000>;
- };
-
- partition@ff0000 {
- label = "reserved";
- reg = <0xff0000 0x10000>;
- read-only;
- };
- };
+&partitions {
+ partition@90000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x90000 0xf60000>;
};
-};
-&wmac {
- status = "okay";
+ partition@ff0000 {
+ label = "reserved";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
};
-&ethernet {
+&wifi5 {
mtd-mac-address = <&factory 0x4>;
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- mtd-mac-address = <&factory 0x4>;
- mtd-mac-address-increment = <(2)>;
- };
+ mtd-mac-address-increment = <(2)>;
};
diff --git a/target/linux/ramips/dts/mt7628an_netgear_r6xxx.dtsi b/target/linux/ramips/dts/mt7628an_netgear_r6xxx.dtsi
new file mode 100644
index 0000000000..640591c316
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_netgear_r6xxx.dtsi
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <86000000>;
+ m25p,fast-read;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "nvram";
+ reg = <0x60000 0x30000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi5: wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 3ee9828a64..d72d937ab8 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -11,7 +11,7 @@ DEVICE_VARS += LOADER_TYPE
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
-DEVICE_VARS += SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER
+DEVICE_VARS += SERCOMM_HWNAME SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER
DEVICE_VARS += JCG_MAXSIZE
loadaddr-y := 0x80000000
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 25de2fa597..9e5bd811b0 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -7,7 +7,7 @@ include ./common-tp-link.mk
DEFAULT_SOC := mt7621
KERNEL_DTB += -d21
-DEVICE_VARS += UIMAGE_MAGIC SERCOMM_HWNAME
+DEVICE_VARS += UIMAGE_MAGIC
# The OEM webinterface expects an kernel with initramfs which has the uImage
# header field ih_name.
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index de92c982cc..4b2255bd6a 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -189,60 +189,51 @@ define Device/mercury_mac1200r-v2
endef
TARGET_DEVICES += mercury_mac1200r-v2
-define Device/netgear_r6020
+define Device/netgear_r6xxx
BLOCKSIZE := 64k
- IMAGE_SIZE := 7104k
DEVICE_VENDOR := NETGEAR
- DEVICE_MODEL := R6020
- DEVICE_PACKAGES := kmod-mt76x2
- SERCOMM_HWID := CFR
- SERCOMM_HWVER := A001
- SERCOMM_SWVER := 0x0040
IMAGES += factory.img
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size
IMAGE/factory.img := pad-extra 576k | $$(IMAGE/default) | \
- pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | zip R6020.bin | \
- sercom-seal
+ pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
+ zip $$$$(SERCOMM_HWNAME).bin | sercom-seal
+endef
+
+define Device/netgear_r6020
+ $(Device/netgear_r6xxx)
+ IMAGE_SIZE := 7104k
+ DEVICE_MODEL := R6020
+ DEVICE_PACKAGES := kmod-mt76x2
+ SERCOMM_HWNAME := R6020
+ SERCOMM_HWID := CFR
+ SERCOMM_HWVER := A001
+ SERCOMM_SWVER := 0x0040
endef
TARGET_DEVICES += netgear_r6020
define Device/netgear_r6080
- BLOCKSIZE := 64k
+ $(Device/netgear_r6xxx)
IMAGE_SIZE := 7552k
- DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := R6080
DEVICE_PACKAGES := kmod-mt76x2
+ SERCOMM_HWNAME := R6080
SERCOMM_HWID := CFR
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0040
- IMAGES += factory.img
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
- pad-rootfs
- IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size
- IMAGE/factory.img := pad-extra 576k | $$(IMAGE/default) | \
- pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | zip R6080.bin | \
- sercom-seal
endef
TARGET_DEVICES += netgear_r6080
define Device/netgear_r6120
- BLOCKSIZE := 64k
+ $(Device/netgear_r6xxx)
IMAGE_SIZE := 15744k
- DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := R6120
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
+ SERCOMM_HWNAME := R6120
SERCOMM_HWID := CGQ
SERCOMM_HWVER := A001
SERCOMM_SWVER := 0x0040
- IMAGES += factory.img
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
- pad-rootfs
- IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size
- IMAGE/factory.img := pad-extra 576k | $$(IMAGE/default) | \
- pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | zip R6120.bin | \
- sercom-seal
endef
TARGET_DEVICES += netgear_r6120