aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ramips')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network15
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh11
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh9
-rw-r--r--target/linux/ramips/dts/WCR-1166DS.dts172
-rw-r--r--target/linux/ramips/image/Makefile3
-rw-r--r--target/linux/ramips/image/mt7628.mk16
-rw-r--r--target/linux/ramips/mt7628/config-4.41
-rw-r--r--target/linux/ramips/patches-4.4/0400-mtd-mtdsplit-add-support-for-custom-trx-magic-for-Buffalo-WCR-1166DS.patch30
9 files changed, 245 insertions, 15 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 91f1aaacbe..c001dfe85a 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -263,6 +263,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
;;
+ wcr-1166ds)
+ ucidef_add_switch "switch0" \
+ "3:lan" "4:wan" "6@eth0"
+ ;;
wcr-150gn)
ucidef_add_switch "switch0" \
"0:lan" "6t@eth0"
@@ -410,6 +414,12 @@ ramips_setup_macs()
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 5)
;;
+ wcr-1166ds|\
+ wsr-1166)
+ local index="$(find_mtd_index "board_data")"
+ wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
+ lan_mac=$wan_mac
+ ;;
wcr-150gn)
wan_mac=$(mtd_get_mac_binary factory 40)
;;
@@ -427,11 +437,6 @@ ramips_setup_macs()
wlr-6000)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2)
;;
- wsr-1166)
- local index="$(find_mtd_index "board_data")"
- wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
- lan_mac=$wan_mac
- ;;
*)
lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 1)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 94998333b3..5fb221380e 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -219,6 +219,12 @@ get_status_led() {
zbt-wr8305rt)
status_led="$board:green:sys"
;;
+ wcr-1166ds|\
+ whr-300hp2|\
+ wsr-1166|\
+ wsr-600)
+ status_led="$board:green:power"
+ ;;
wcr-150gn|\
wl-351)
status_led="$board:amber:power"
@@ -233,11 +239,6 @@ get_status_led() {
wizfi630a)
status_led="$board::run"
;;
- whr-300hp2|\
- wsr-1166|\
- wsr-600)
- status_led="$board:green:power"
- ;;
wrtnode2r | \
wrtnode2p | \
wrtnode)
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 8292da1d4a..d9918cceb5 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -499,6 +499,9 @@ ramips_board_detect() {
*"W502U")
name="w502u"
;;
+ *"WCR-1166DS")
+ name="wcr-1166ds"
+ ;;
*"WCR-150GN")
name="wcr-150gn"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index c6ad8ca3e5..d83e5c1dd2 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -226,6 +226,11 @@ platform_check_image() {
}
return 0
;;
+ ubnt-erx)
+ nand_do_platform_check "$board" "$1"
+ return $?;
+ ;;
+ wcr-1166ds|\
wsr-1166)
[ "$magic" != "48445230" ] && {
echo "Invalid image type."
@@ -233,10 +238,6 @@ platform_check_image() {
}
return 0
;;
- ubnt-erx)
- nand_do_platform_check "$board" "$1"
- return $?;
- ;;
esac
echo "Sysupgrade is not yet supported on $board."
diff --git a/target/linux/ramips/dts/WCR-1166DS.dts b/target/linux/ramips/dts/WCR-1166DS.dts
new file mode 100644
index 0000000000..ad3f21ba67
--- /dev/null
+++ b/target/linux/ramips/dts/WCR-1166DS.dts
@@ -0,0 +1,172 @@
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "buffalo,wcr-1166ds", "mediatek,mt7628an-soc";
+ model = "Buffalo WCR-1166DS";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ aoss {
+ label = "aoss";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ router_o {
+ label = "wcr-1166ds:orange:router";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ router_g {
+ label = "wcr-1166ds:green:router";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ };
+
+ internet_o {
+ label = "wcr-1166ds:orange:internet";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ internet_g {
+ label = "wcr-1166ds:green:internet";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless_o {
+ label = "wcr-1166ds:orange:wireless";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless_g {
+ label = "wcr-1166ds:green:wireless";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+
+ diag {
+ label = "wcr-1166ds:orange:diag";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "wcr-1166ds:green:power";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&esw {
+ mediatek,portmap = <0x2f>;
+ mediatek,portdisable = <0x27>;
+};
+
+&ohci {
+ status = "disabled";
+};
+
+&pcie {
+ status = "okay";
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart1", "wled_an", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt", "refclk", "gpio", "i2s";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7c0000>;
+ };
+
+ partition@810000 {
+ label = "firmware2";
+ reg = <0x810000 0x7c0000>;
+ };
+
+ partition@fd0000 {
+ label = "glbcfg";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "board_data";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 2952c5f840..f34eba79cd 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -23,6 +23,7 @@ define Image/Build/Initramfs
endef
DEVICE_VARS += DTS IMAGE_SIZE NETGEAR_BOARD_ID NETGEAR_HW_ID
+DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
loadaddr-y := 0x80000000
loadaddr-$(CONFIG_TARGET_ramips_rt288x) := 0x88000000
@@ -48,7 +49,7 @@ define Build/patch-dtb
endef
define Build/trx
- $(STAGING_DIR_HOST)/bin/trx \
+ $(STAGING_DIR_HOST)/bin/trx $(1) \
-o $@ \
-m $(IMAGE_SIZE) \
-f $(IMAGE_KERNEL) \
diff --git a/target/linux/ramips/image/mt7628.mk b/target/linux/ramips/image/mt7628.mk
index 4502588c80..0304921f41 100644
--- a/target/linux/ramips/image/mt7628.mk
+++ b/target/linux/ramips/image/mt7628.mk
@@ -55,3 +55,19 @@ define Device/mac1200r-v2
DEVICE_TITLE := Mercury MAC1200R v2.0
endef
TARGET_DEVICES += mac1200r-v2
+
+define Device/wcr-1166ds
+ DTS := WCR-1166DS
+ BUFFALO_TAG_PLATFORM := MTK
+ BUFFALO_TAG_VERSION := 9.99
+ BUFFALO_TAG_MINOR := 9.99
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
+ IMAGE/factory.bin := \
+ trx -M 0x746f435c | pad-rootfs | append-metadata | \
+ buffalo-enc WCR-1166DS $$(BUFFALO_TAG_VERSION) -l | \
+ buffalo-tag-dhp WCR-1166DS JP JP | buffalo-enc-tag -l | \
+ buffalo-dhp-image
+ DEVICE_TITLE := Buffalo WCR-1166DS
+endef
+TARGET_DEVICES += wcr-1166ds
diff --git a/target/linux/ramips/mt7628/config-4.4 b/target/linux/ramips/mt7628/config-4.4
index 6b04457f17..6cd7838aee 100644
--- a/target/linux/ramips/mt7628/config-4.4
+++ b/target/linux/ramips/mt7628/config-4.4
@@ -138,6 +138,7 @@ CONFIG_MTD_NAND_MT7620=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_TRX_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
diff --git a/target/linux/ramips/patches-4.4/0400-mtd-mtdsplit-add-support-for-custom-trx-magic-for-Buffalo-WCR-1166DS.patch b/target/linux/ramips/patches-4.4/0400-mtd-mtdsplit-add-support-for-custom-trx-magic-for-Buffalo-WCR-1166DS.patch
new file mode 100644
index 0000000000..1af72f93df
--- /dev/null
+++ b/target/linux/ramips/patches-4.4/0400-mtd-mtdsplit-add-support-for-custom-trx-magic-for-Buffalo-WCR-1166DS.patch
@@ -0,0 +1,30 @@
+--- a/drivers/mtd/mtdsplit/mtdsplit_trx.c
++++ b/drivers/mtd/mtdsplit/mtdsplit_trx.c
+@@ -13,6 +13,7 @@
+ #include <linux/module.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
++#include <linux/of.h>
+ #include <linux/slab.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+@@ -20,7 +21,8 @@
+
+ #include "mtdsplit.h"
+
+-#define TRX_MAGIC 0x30524448 /* "HDR0" */
++#define TRX_MAGIC 0x30524448 /* "HDR0" */
++#define TRX_MAGIC_BUFFALO 0x746f435c
+
+ struct trx_header {
+ __le32 magic;
+@@ -82,7 +84,8 @@ mtdsplit_parse_trx(struct mtd_info *mast
+ if (ret)
+ continue;
+
+- if (hdr.magic != cpu_to_le32(TRX_MAGIC)) {
++ if (hdr.magic != cpu_to_le32(TRX_MAGIC) &&
++ !(of_machine_is_compatible("buffalo,wcr-1166ds") && hdr.magic == cpu_to_le32(TRX_MAGIC_BUFFALO))) {
+ pr_debug("no valid trx header found in \"%s\" at offset %llx\n",
+ master->name, (unsigned long long) offset);
+ continue;