diff options
Diffstat (limited to 'target/linux/realtek/dts-5.10/rtl838x.dtsi')
| -rw-r--r-- | target/linux/realtek/dts-5.10/rtl838x.dtsi | 287 |
1 files changed, 0 insertions, 287 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl838x.dtsi b/target/linux/realtek/dts-5.10/rtl838x.dtsi deleted file mode 100644 index 64e13e1ff3..0000000000 --- a/target/linux/realtek/dts-5.10/rtl838x.dtsi +++ /dev/null @@ -1,287 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/clock/rtl83xx-clk.h> - -/dts-v1/; - -#define STRINGIZE(s) #s -#define LAN_LABEL(p, s) STRINGIZE(p ## s) -#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n) - -#define INTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - phy-is-integrated; \ - }; - -#define EXTERNAL_PHY(n) \ - phy##n: ethernet-phy@##n { \ - reg = <##n>; \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - }; - -#define EXTERNAL_SFP_PHY(n) \ - phy##n: ethernet-phy@##n { \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - sfp; \ - media = "fibre"; \ - reg = <##n>; \ - }; - -#define EXTERNAL_SFP_PHY_FULL(n, s) \ - phy##n: ethernet-phy@##n { \ - compatible = "ethernet-phy-ieee802.3-c22"; \ - sfp = <&sfp##s>; \ - reg = <##n>; \ - }; - -#define SWITCH_PORT(n, s, m) \ - port##n: port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - }; - -#define SWITCH_SFP_PORT(n, s, m) \ - port##n: port@##n { \ - reg = <##n>; \ - label = SWITCH_PORT_LABEL(s) ; \ - phy-handle = <&phy##n>; \ - phy-mode = #m ; \ - fixed-link { \ - speed = <1000>; \ - full-duplex; \ - }; \ - }; - -/ { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "realtek,rtl838x-soc"; - - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - ccu: clock-controller { - compatible = "realtek,rtl8380-clock"; - #clock-cells = <1>; - clocks = <&osc>; - clock-names = "ref_clk"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "mips,mips4KEc"; - reg = <0>; - clocks = <&ccu CLK_CPU>; - operating-points-v2 = <&cpu_opp_table>; - }; - }; - - cpu_opp_table: opp-table-0 { - compatible = "operating-points-v2"; - opp-shared; - - opp00 { - opp-hz = /bits/ 64 <325000000>; - }; - opp01 { - opp-hz = /bits/ 64 <350000000>; - }; - opp02 { - opp-hz = /bits/ 64 <375000000>; - }; - opp03 { - opp-hz = /bits/ 64 <400000000>; - }; - opp04 { - opp-hz = /bits/ 64 <425000000>; - }; - opp05 { - opp-hz = /bits/ 64 <450000000>; - }; - opp06 { - opp-hz = /bits/ 64 <475000000>; - }; - opp07 { - opp-hz = /bits/ 64 <500000000>; - }; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - cpuintc: cpuintc { - compatible = "mti,cpu-interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x18000000 0x10000>; - - intc: interrupt-controller@3000 { - compatible = "realtek,rtl8380-intc", "realtek,rtl-intc"; - reg = <0x3000 0x18>; - interrupt-controller; - #interrupt-cells = <2>; - - interrupt-parent = <&cpuintc>; - interrupts = <2>, <3>, <4>, <5>, <6>; - }; - - spi0: spi@1200 { - compatible = "realtek,rtl8380-spi"; - reg = <0x1200 0x100>; - - #address-cells = <1>; - #size-cells = <0>; - }; - - timer0: timer@3100 { - compatible = "realtek,rtl8380-timer", "realtek,otto-timer"; - reg = <0x3100 0x10>, <0x3110 0x10>, <0x3120 0x10>, - <0x3130 0x10>, <0x3140 0x10>; - - interrupt-parent = <&intc>; - interrupts = <29 4>, <28 4>, <17 4>, <16 4>, <15 4>; - clocks = <&ccu CLK_LXB>; - }; - - uart0: uart@2000 { - compatible = "ns16550a"; - reg = <0x2000 0x100>; - - clocks = <&ccu CLK_LXB>; - - interrupt-parent = <&intc>; - interrupts = <31 1>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; - - uart1: uart@2100 { - pinctrl-names = "default"; - pinctrl-0 = <&enable_uart1>; - - compatible = "ns16550a"; - reg = <0x2100 0x100>; - - clocks = <&ccu CLK_LXB>; - - interrupt-parent = <&intc>; - interrupts = <30 0>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - - status = "disabled"; - }; - - watchdog0: watchdog@3150 { - compatible = "realtek,rtl8380-wdt"; - reg = <0x3150 0xc>; - - realtek,reset-mode = "soc"; - - clocks = <&ccu CLK_LXB>; - timeout-sec = <30>; - - interrupt-parent = <&intc>; - interrupt-names = "phase1", "phase2"; - interrupts = <19 3>, <18 4>; - }; - - gpio0: gpio-controller@3500 { - compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; - reg = <0x3500 0x20>; - - gpio-controller; - #gpio-cells = <2>; - ngpios = <24>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&intc>; - interrupts = <23 3>; - }; - }; - - pinmux: pinmux@1b001000 { - compatible = "pinctrl-single"; - reg = <0x1b001000 0x4>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - enable_uart1: pinmux_enable_uart1 { - pinctrl-single,bits = <0x0 0x10 0x10>; - }; - }; - - /* LED_GLB_CTRL */ - pinmux_led: pinmux@1b00a000 { - compatible = "pinctrl-single"; - reg = <0x1b00a000 0x4>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - /* enable GPIO 0 */ - pinmux_disable_sys_led: disable_sys_led { - pinctrl-single,bits = <0x0 0x0 0x8000>; - }; - }; - - ethernet0: ethernet@1b00a300 { - compatible = "realtek,rtl838x-eth"; - reg = <0x1b00a300 0x100>; - interrupt-parent = <&intc>; - interrupts = <24 3>; - #interrupt-cells = <1>; - phy-mode = "internal"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - sram0: sram@9f000000 { - compatible = "mmio-sram"; - reg = <0x9f000000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x9f000000 0x10000>; - }; - - switch0: switch@1b000000 { - compatible = "realtek,rtl83xx-switch"; - - interrupt-parent = <&intc>; - interrupts = <20 2>; - }; -}; |