diff options
Diffstat (limited to 'target/linux/realtek/dts-5.10/rtl931x.dtsi')
| -rw-r--r-- | target/linux/realtek/dts-5.10/rtl931x.dtsi | 200 |
1 files changed, 0 insertions, 200 deletions
diff --git a/target/linux/realtek/dts-5.10/rtl931x.dtsi b/target/linux/realtek/dts-5.10/rtl931x.dtsi deleted file mode 100644 index fd932c8be1..0000000000 --- a/target/linux/realtek/dts-5.10/rtl931x.dtsi +++ /dev/null @@ -1,200 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/interrupt-controller/mips-gic.h> - -/ { - #address-cells = <1>; - #size-cells = <1>; - - compatible = "realtek,rtl838x-soc"; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - frequency = <1000000000>; - - cpu@0 { - compatible = "mti,interaptive"; - reg = <0>; - }; - - cpu@1 { - compatible = "mti,interaptive"; - reg = <1>; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - lx_clk: lx_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <200000000>; - }; - - cpuclock: cpuclock@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - - /* FIXME: there should be way to detect this */ - clock-frequency = <1000000000>; - }; - - cpuintc: cpuintc { - compatible = "mti,cpu-interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - - gic: interrupt-controller@1ddc0000 { - compatible = "mti,gic"; - reg = <0x1ddc0000 0x20000>; - - interrupt-controller; - #interrupt-cells = <3>; - - /* - * Declare the interrupt-parent even though the mti,gic - * binding doesn't require it, such that the kernel can - * figure out that cpu_intc is the root interrupt - * controller & should be probed first. - */ - interrupt-parent = <&cpuintc>; - - timer { - compatible = "mti,gic-timer"; - interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>; - clocks = <&cpuclock>; - }; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x18000000 0x10000>; - - spi0: spi@1200 { - status = "okay"; - - compatible = "realtek,rtl8380-spi"; - reg = <0x1200 0x100>; - - #address-cells = <1>; - #size-cells = <0>; - }; - - watchdog0: watchdog@3260 { - compatible = "realtek,rtl9310-wdt"; - reg = <0x3260 0xc>; - - realtek,reset-mode = "soc"; - - clocks = <&lx_clk>; - timeout-sec = <30>; - - interrupt-parent = <&gic>; - interrupt-names = "phase1", "phase2"; - interrupts = <GIC_SHARED 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SHARED 9 IRQ_TYPE_LEVEL_HIGH>; - }; - - gpio0: gpio-controller@3300 { - compatible = "realtek,rtl9310-gpio", "realtek,otto-gpio"; - reg = <0x3300 0x1c>; - - gpio-controller; - #gpio-cells = <2>; - ngpios = <32>; - - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>; - }; - - uart0: uart@2000 { - compatible = "ns16550a"; - reg = <0x2000 0x100>; - - clock-frequency = <200000000>; - - interrupt-parent = <&gic>; - #interrupt-cells = <3>; - interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - }; - - uart1: uart@2100 { - compatible = "ns16550a"; - reg = <0x2100 0x100>; - - clock-frequency = <200000000>; - - interrupt-parent = <&gic>; - #interrupt-cells = <3>; - interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; - - reg-io-width = <1>; - reg-shift = <2>; - fifo-size = <1>; - no-loopback-test; - - status = "disabled"; - }; - }; - - pinmux: pinmux@1b001358 { - compatible = "pinctrl-single"; - reg = <0x1b001358 0x4>; - - pinctrl-single,bit-per-mux; - pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0x1>; - #pinctrl-cells = <2>; - - /* Enable GPIO6 and GPIO7, possibly unknown others */ - pinmux_disable_jtag: disable_jtag { - pinctrl-single,bits = <0x0 0x0 0x8000>; - }; - - /* Controls GPIO0 */ - pinmux_disable_sys_led: disable_sys_led { - pinctrl-single,bits = <0x0 0x0 0x100>; - }; - }; - - ethernet0: ethernet@1b00a300 { - status = "okay"; - compatible = "realtek,rtl838x-eth"; - reg = <0x1b00a300 0x100>; - interrupt-parent = <&gic>; - #interrupt-cells = <3>; - interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>; - phy-mode = "internal"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch0: switch@1b000000 { - compatible = "realtek,rtl83xx-switch"; - status = "okay"; - - interrupt-parent = <&gic>; - #interrupt-cells = <3>; - interrupts = <GIC_SHARED 15 IRQ_TYPE_LEVEL_HIGH>; - }; -}; |