diff options
Diffstat (limited to 'target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x')
-rw-r--r-- | target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h | 27 | ||||
-rw-r--r-- | target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h | 217 |
2 files changed, 105 insertions, 139 deletions
diff --git a/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h index 580c3d8d61..a4e95ab511 100644 --- a/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h +++ b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/irq.h @@ -34,6 +34,9 @@ #define UART1_CASCADE 1 #define TC0_CASCADE 5 #define TC1_CASCADE 1 +#define TC2_CASCADE 1 +#define TC3_CASCADE 1 +#define TC4_CASCADE 1 #define OCPTO_CASCADE 1 #define HLXTO_CASCADE 1 #define SLXTO_CASCADE 1 @@ -44,6 +47,7 @@ #define SWCORE_CASCADE 3 #define WDT_IP1_CASCADE 4 #define WDT_IP2_CASCADE 5 +#define USB_H2_CASCADE 1 /* Pack cascade map into interrupt routing registers */ #define RTL83XX_IRR0_SETTING (\ @@ -63,4 +67,27 @@ #define RTL83XX_IRR2_SETTING 0 #define RTL83XX_IRR3_SETTING 0 +/* On the RTL8390 there is no GPIO_EFGH and RTC IRQ */ +#define RTL8390_IRR1_SETTING (\ + (GPIO_ABCD_CASCADE << 28) | \ + (SWCORE_CASCADE << 16)) + +/* The RTL9300 has a different external IRQ numbering scheme */ +#define RTL9300_IRR0_SETTING (\ + (UART1_CASCADE << 28) | \ + (UART0_CASCADE << 24) | \ + (USB_H2_CASCADE << 16) | \ + (NIC_CASCADE << 0)) +#define RTL9300_IRR1_SETTING (\ + (SWCORE_CASCADE << 28)) +#define RTL9300_IRR2_SETTING (\ + (GPIO_ABCD_CASCADE << 20) | \ + (TC4_CASCADE << 12) | \ + (TC3_CASCADE << 8) | \ + (TC2_CASCADE << 4) | \ + (TC1_CASCADE << 0)) +#define RTL9300_IRR3_SETTING (\ + (TC0_CASCADE << 28) | \ + (WDT_IP1_CASCADE << 20)) + #endif /* _RTL83XX_IRQ_H_ */ diff --git a/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h index b7d2a6f037..fc401e5481 100644 --- a/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h +++ b/target/linux/realtek/files-5.4/arch/mips/include/asm/mach-rtl838x/mach-rtl83xx.h @@ -47,20 +47,32 @@ #define RTL838X_IRQ_ICTL_BASE (RTL838X_IRQ_CPU_BASE + RTL838X_IRQ_CPU_NUM) #define RTL838X_IRQ_ICTL_NUM 32 -#define RTL83XX_IRQ_UART0 31 -#define RTL83XX_IRQ_UART1 30 -#define RTL83XX_IRQ_TC0 29 -#define RTL83XX_IRQ_TC1 28 -#define RTL83XX_IRQ_OCPTO 27 -#define RTL83XX_IRQ_HLXTO 26 -#define RTL83XX_IRQ_SLXTO 25 -#define RTL83XX_IRQ_NIC 24 -#define RTL83XX_IRQ_GPIO_ABCD 23 -#define RTL83XX_IRQ_GPIO_EFGH 22 -#define RTL83XX_IRQ_RTC 21 -#define RTL83XX_IRQ_SWCORE 20 -#define RTL83XX_IRQ_WDT_IP1 19 -#define RTL83XX_IRQ_WDT_IP2 18 +#define RTL83XX_IRQ_UART0 31 +#define RTL83XX_IRQ_UART1 30 +#define RTL83XX_IRQ_TC0 29 +#define RTL83XX_IRQ_TC1 28 +#define RTL83XX_IRQ_OCPTO 27 +#define RTL83XX_IRQ_HLXTO 26 +#define RTL83XX_IRQ_SLXTO 25 +#define RTL83XX_IRQ_NIC 24 +#define RTL83XX_IRQ_GPIO_ABCD 23 +#define RTL83XX_IRQ_GPIO_EFGH 22 +#define RTL83XX_IRQ_RTC 21 +#define RTL83XX_IRQ_SWCORE 20 +#define RTL83XX_IRQ_WDT_IP1 19 +#define RTL83XX_IRQ_WDT_IP2 18 + +#define RTL9300_UART1_IRQ 31 +#define RTL9300_UART0_IRQ 30 +#define RTL9300_USB_H2_IRQ 28 +#define RTL9300_NIC_IRQ 24 +#define RTL9300_SWCORE_IRQ 23 +#define RTL9300_GPIO_ABC_IRQ 13 +#define RTL9300_TC4_IRQ 11 +#define RTL9300_TC3_IRQ 10 +#define RTL9300_TC2_IRQ 9 +#define RTL9300_TC1_IRQ 8 +#define RTL9300_TC0_IRQ 7 /* @@ -108,32 +120,6 @@ #define WDT_IP1_IP (1 << 19) #define WDT_IP2_IP (1 << 18) -#define IRR0 (0x08) -#define IRR0_SETTING ((UART0_RS << 28) | \ - (UART1_RS << 24) | \ - (TC0_RS << 20) | \ - (TC1_RS << 16) | \ - (OCPTO_RS << 12) | \ - (HLXTO_RS << 8) | \ - (SLXTO_RS << 4) | \ - (NIC_RS << 0) \ - ) - -#define IRR1 (0x0c) -#define IRR1_SETTING_RTL838X ((GPIO_ABCD_RS << 28) | \ - (GPIO_EFGH_RS << 24) | \ - (RTC_RS << 20) | \ - (SWCORE_RS << 16) \ - ) -#define IRR1_SETTING_RTL839X ((GPIO_ABCD_RS << 28) | \ - (SWCORE_RS << 16) \ - ) - -#define IRR2 (0x10) -#define IRR2_SETTING 0 - -#define IRR3 (0x14) -#define IRR3_SETTING 0 /* Interrupt Routing Selection */ #define UART0_RS 2 @@ -200,107 +186,9 @@ #define UART1_DLM (RTL838X_UART1_BASE + 0x004) #define UART1_IIR (RTL838X_UART1_BASE + 0x008) #define UART1_FCR (RTL838X_UART1_BASE + 0x008) - #define FCR_EN 0x01 - #define FCR_RXRST 0x02 - #define XRST 0x02 - #define FCR_TXRST 0x04 - #define TXRST 0x04 - #define FCR_DMA 0x08 - #define FCR_RTRG 0xC0 - #define CHAR_TRIGGER_01 0x00 - #define CHAR_TRIGGER_04 0x40 - #define CHAR_TRIGGER_08 0x80 - #define CHAR_TRIGGER_14 0xC0 #define UART1_LCR (RTL838X_UART1_BASE + 0x00C) - #define LCR_WLN 0x03 - #define CHAR_LEN_5 0x00 - #define CHAR_LEN_6 0x01 - #define CHAR_LEN_7 0x02 - #define CHAR_LEN_8 0x03 - #define LCR_STB 0x04 - #define ONE_STOP 0x00 - #define TWO_STOP 0x04 - #define LCR_PEN 0x08 - #define PARITY_ENABLE 0x01 - #define PARITY_DISABLE 0x00 - #define LCR_EPS 0x30 - #define PARITY_ODD 0x00 - #define PARITY_EVEN 0x10 - #define PARITY_MARK 0x20 - #define PARITY_SPACE 0x30 - #define LCR_BRK 0x40 - #define LCR_DLAB 0x80 - #define DLAB 0x80 #define UART1_MCR (RTL838X_UART1_BASE + 0x010) #define UART1_LSR (RTL838X_UART1_BASE + 0x014) - #define LSR_DR 0x01 - #define RxCHAR_AVAIL 0x01 - #define LSR_OE 0x02 - #define LSR_PE 0x04 - #define LSR_FE 0x08 - #define LSR_BI 0x10 - #define LSR_THRE 0x20 - #define TxCHAR_AVAIL 0x00 - #define TxCHAR_EMPTY 0x20 - #define LSR_TEMT 0x40 - #define LSR_RFE 0x80 - -/* - * Timer/counter for 8390/80/28 TC & MP chip - */ -#define RTL838X_TIMER0_BASE ((volatile void *)(0xb8003100UL)) -#define RTL838X_TIMER0_IRQ RTL838X_TC0_EXT_IRQ - -#define RTL8390TC_TC1DATA (RTL838X_TIMER0_BASE + 0x04) -#define RTL8390TC_TCD_OFFSET 8 -#define RTL8390TC_TC0CNT (RTL838X_TIMER0_BASE + 0x08) -#define RTL8390TC_TC1CNT (RTL838X_TIMER0_BASE + 0x0C) -#define RTL8390TC_TCCNR (RTL838X_TIMER0_BASE + 0x10) -#define RTL8390TC_TC0EN (1 << 31) -#define RTL8390TC_TC0MODE_TIMER (1 << 30) -#define RTL8390TC_TC1EN (1 << 29) -#define RTL8390TC_TC1MODE_TIMER (1 << 28) -#define RTL8390TC_TCIR (RTL838X_TIMER0_BASE + 0x14) -#define RTL8390TC_TC0IE (1 << 31) -#define RTL8390TC_TC1IE (1 << 30) -#define RTL8390TC_TC0IP (1 << 29) -#define RTL8390TC_TC1IP (1 << 28) -#define RTL8390TC_CDBR (RTL838X_TIMER0_BASE + 0x18) -#define RTL8390TC_DIVF_OFFSET 16 -#define RTL8390TC_WDTCNR (RTL838X_TIMER0_BASE + 0x1C) - -#define RTL8390MP_TC1DATA (RTL838X_TIMER0_BASE + 0x10) -#define RTL8390MP_TC0CNT (RTL838X_TIMER0_BASE + 0x04) -#define RTL8390MP_TC1CNT (RTL838X_TIMER0_BASE + 0x14) -#define RTL8390MP_TC0CTL (RTL838X_TIMER0_BASE + 0x08) -#define RTL8390MP_TC1CTL (RTL838X_TIMER0_BASE + 0x18) -#define RTL8390MP_TCEN (1 << 28) -#define RTL8390MP_TCMODE_TIMER (1 << 24) -#define RTL8390MP_TCDIV_FACTOR (0xFFFF << 0) -#define RTL8390MP_TC0INT (RTL838X_TIMER0_BASE + 0xC) -#define RTL8390MP_TC1INT (RTL838X_TIMER0_BASE + 0x1C) -#define RTL8390MP_TCIE (1 << 20) -#define RTL8390MP_TCIP (1 << 16) -#define RTL8390MP_WDTCNR (RTL838X_TIMER0_BASE + 0x50) - -#define RTL8380MP_TC0DATA (RTL838X_TIMER0_BASE + 0x00) -#define RTL8380MP_TC1DATA (RTL838X_TIMER0_BASE + 0x10) -#define RTL8380MP_TC0CNT (RTL838X_TIMER0_BASE + 0x04) -#define RTL8380MP_TC1CNT (RTL838X_TIMER0_BASE + 0x14) -#define RTL8380MP_TC0CTL (RTL838X_TIMER0_BASE + 0x08) -#define RTL8380MP_TC1CTL (RTL838X_TIMER0_BASE + 0x18) -#define RTL8380MP_TCEN (1 << 28) -#define RTL8380MP_TCMODE_TIMER (1 << 24) -#define RTL8380MP_TCDIV_FACTOR (0xFFFF << 0) -#define RTL8380MP_TC0INT (RTL838X_TIMER0_BASE + 0xC) -#define RTL8380MP_TC1INT (RTL838X_TIMER0_BASE + 0x1C) -#define RTL8380MP_TCIE (1 << 20) -#define RTL8380MP_TCIP (1 << 16) -#define RTL8380MP_WDTCNR (RTL838X_TIMER0_BASE + 0x50) - -#define DIVISOR_RTL8390 55 -#define DIVISOR_RTL8380 2500 -#define DIVISOR_MAX 16834 /* * Memory Controller @@ -328,8 +216,14 @@ #define RTL838X_MODEL_NAME_INFO (0x00D4) #define RTL839X_MODEL_NAME_INFO (0x0FF0) +#define RTL93XX_MODEL_NAME_INFO (0x0004) + #define RTL838X_LED_GLB_CTRL (0xA000) #define RTL839X_LED_GLB_CTRL (0x00E4) +#define RTL9302_LED_GLB_CTRL (0xcc00) +#define RTL930X_LED_GLB_CTRL (0xC400) +#define RTL931X_LED_GLB_CTRL (0x0600) + #define RTL838X_EXT_GPIO_DIR (0xA08C) #define RTL839X_EXT_GPIO_DIR (0x0214) #define RTL838X_EXT_GPIO_DATA (0xA094) @@ -377,8 +271,11 @@ * Reset */ #define RGCR (0x1E70) -#define RTL839X_RST_GLB_CTRL (0x0014) +#define RTL838X_RST_GLB_CTRL_0 (0x003c) #define RTL838X_RST_GLB_CTRL_1 (0x0040) +#define RTL839X_RST_GLB_CTRL (0x0014) +#define RTL930X_RST_GLB_CTRL_0 (0x000c) +#define RTL931X_RST_GLB_CTRL (0x0400) /* LED control by switch */ #define RTL838X_LED_MODE_SEL (0x1004) @@ -419,6 +316,24 @@ #define RTL839X_PHYREG_PORT_CTRL(p) (0x03E4 + ((p >> 5) << 2)) #define RTL839X_PHYREG_DATA_CTRL (0x03F0) +#define RTL930X_SMI_GLB_CTRL (0xCA00) +#define RTL930X_SMI_POLL_CTRL (0xca90) +#define RTL930X_SMI_PORT0_15_POLLING_SEL (0xCA08) +#define RTL930X_SMI_PORT16_27_POLLING_SEL (0xCA0C) +#define RTL930X_SMI_PORT0_5_ADDR (0xCB80) +#define RTL930X_SMI_ACCESS_PHY_CTRL_0 (0xCB70) +#define RTL930X_SMI_ACCESS_PHY_CTRL_1 (0xCB74) +#define RTL930X_SMI_ACCESS_PHY_CTRL_2 (0xCB78) +#define RTL930X_SMI_ACCESS_PHY_CTRL_3 (0xCB7C) + +#define RTL931X_SMI_GLB_CTRL1 (0x0CBC) +#define RTL931X_SMI_GLB_CTRL0 (0x0CC0) +#define RTL931X_SMI_PORT_POLLING_CTRL (0x0CCC) +#define RTL931X_SMI_INDRT_ACCESS_CTRL_0 (0x0C00) +#define RTL931X_SMI_INDRT_ACCESS_CTRL_1 (0x0C04) +#define RTL931X_SMI_INDRT_ACCESS_CTRL_2 (0x0C08) +#define RTL931X_SMI_INDRT_ACCESS_CTRL_3 (0x0C10) + /* * Switch interrupts */ @@ -426,11 +341,22 @@ #define RTL838X_IMR_PORT_LINK_STS_CHG (0x1104) #define RTL838X_ISR_GLB_SRC (0x1148) #define RTL838X_ISR_PORT_LINK_STS_CHG (0x114C) + #define RTL839X_IMR_GLB (0x0064) #define RTL839X_IMR_PORT_LINK_STS_CHG (0x0068) #define RTL839X_ISR_GLB_SRC (0x009c) #define RTL839X_ISR_PORT_LINK_STS_CHG (0x00a0) +#define RTL930X_IMR_GLB (0xC628) +#define RTL930X_IMR_PORT_LINK_STS_CHG (0xC62C) +#define RTL930X_ISR_GLB (0xC658) +#define RTL930X_ISR_PORT_LINK_STS_CHG (0xC660) + +// IMR_GLB does not exit on RTL931X +#define RTL931X_IMR_PORT_LINK_STS_CHG (0x126C) +#define RTL931X_ISR_GLB_SRC (0x12B4) +#define RTL931X_ISR_PORT_LINK_STS_CHG (0x12B8) + /* Definition of family IDs */ #define RTL8389_FAMILY_ID (0x8389) #define RTL8328_FAMILY_ID (0x8328) @@ -438,6 +364,14 @@ #define RTL8350_FAMILY_ID (0x8350) #define RTL8380_FAMILY_ID (0x8380) #define RTL8330_FAMILY_ID (0x8330) +#define RTL9300_FAMILY_ID (0x9300) +#define RTL9310_FAMILY_ID (0x9310) + +/* Basic SoC Features */ +#define RTL838X_CPU_PORT 28 +#define RTL839X_CPU_PORT 52 +#define RTL930X_CPU_PORT 28 +#define RTL931X_CPU_PORT 56 struct rtl83xx_soc_info { unsigned char *name; @@ -446,6 +380,7 @@ struct rtl83xx_soc_info { unsigned char *compatible; volatile void *sw_base; volatile void *icu_base; + int cpu_port; }; /* rtl83xx-related functions used across subsystems */ @@ -454,5 +389,9 @@ int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val); int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val); int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val); int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val); +int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val); +int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val); +int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val); +int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val); #endif /* _MACH_RTL838X_H_ */ |