1 files changed, 60 insertions, 0 deletions
diff --git a/target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch b/target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch
new file mode 100644
index 0000000000..20d18597db
--- /dev/null
+++ b/target/linux/rockchip/patches-5.10/102-rockchip-enable-LAN-port-on-NanoPi-R2S.patch
@@ -0,0 +1,60 @@
+From 0fc3b9b7619c4878f73a6a7989863f0d1a3fd392 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Fri, 10 Jul 2020 21:12:16 +0200
+Subject: [PATCH] rockchip: enabled LAN port on NanoPi R2S
+
+Enable the USB3 port on the FriendlyARM NanoPi R2S.
+This is required for the USB3 attached LAN port to work.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ .../boot/dts/rockchip/rk3328-nanopi-r2s.dts   | 27 +++++++++++++++++++
+ 1 file changed, 27 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+@@ -44,6 +44,18 @@
+ 		};
+ 	};
+ 
++	vcc_rtl8153: vcc-rtl8153-regulator {
++		compatible = "regulator-fixed";
++		gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&rtl8153_en_drv>;
++		regulator-always-on;
++		regulator-name = "vcc_rtl8153";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		enable-active-high;
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+ 		pinctrl-0 = <&lan_led_pin>,  <&sys_led_pin>, <&wan_led_pin>;
+@@ -267,6 +279,12 @@
+ 			};
+ 		};
+ 	};
++
++	usb {
++		rtl8153_en_drv: rtl8153-en-drv {
++			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
+ };
+ 
+ &io_domains {
+@@ -373,3 +391,12 @@
+ &usb_host0_ohci {
+ 	status = "okay";
+ };
++
++&usbdrd3 {
++	status = "okay";
++};
++
++&usbdrd_dwc3 {
++	dr_mode = "host";
++	status = "okay";
++};