diff options
Diffstat (limited to 'target/linux')
17 files changed, 0 insertions, 1759 deletions
diff --git a/target/linux/kirkwood/config-4.19 b/target/linux/kirkwood/config-4.19 deleted file mode 100644 index d7ea9e9eef..0000000000 --- a/target/linux/kirkwood/config-4.19 +++ /dev/null @@ -1,344 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_ARCH_HAS_FORTIFY_SOURCE=y -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_ARCH_HAS_KCOV=y -CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y -CONFIG_ARCH_HAS_PHYS_TO_DMA=y -CONFIG_ARCH_HAS_SET_MEMORY=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y -CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_CPU_AUTO=y -# CONFIG_ARCH_MULTI_V4 is not set -# CONFIG_ARCH_MULTI_V4T is not set -CONFIG_ARCH_MULTI_V4_V5=y -CONFIG_ARCH_MULTI_V5=y -CONFIG_ARCH_MVEBU=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_LIBATA_LEDS=y -CONFIG_ARM=y -# CONFIG_ARMADA_THERMAL is not set -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -CONFIG_ARM_HAS_SG_CHAIN=y -# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set -CONFIG_ARM_L1_CACHE_SHIFT=5 -# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_THUMB is not set -CONFIG_ATA=y -CONFIG_ATAGS=y -CONFIG_ATA_LEDS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_CACHE_FEROCEON_L2=y -# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_FEROCEON=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FEROCEON=y -# CONFIG_CPU_FEROCEON_OLD_ID is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_PABRT_LEGACY=y -CONFIG_CPU_PM=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_FEROCEON=y -CONFIG_CPU_USE_DOMAINS=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y -# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set -CONFIG_DEBUG_UART_8250=y -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=2 -# CONFIG_DEBUG_UART_8250_WORD is not set -CONFIG_DEBUG_UART_PHYS=0xf1012000 -CONFIG_DEBUG_UART_VIRT=0xfed12000 -CONFIG_DEBUG_UNCOMPRESS=y -# CONFIG_DEBUG_USER is not set -# CONFIG_DLCI is not set -CONFIG_DNOTIFY=y -CONFIG_DTC=y -# CONFIG_EARLY_PRINTK is not set -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EXT4_FS=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FRAME_POINTER=y -CONFIG_FS_IOMAP=y -CONFIG_FS_MBCACHE=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_SYSFS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_EBPF_JIT=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_RSEQ=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_OMAP=y -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MV64XXX=y -# CONFIG_I2C_PXA is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_JBD2=y -CONFIG_KIRKWOOD_CLK=y -CONFIG_KIRKWOOD_THERMAL=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_NETXBIG=y -CONFIG_LEDS_NS2=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_MVEBU_ANY=y -CONFIG_MANGLE_BOOTARGS=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_MVSDIO=y -# CONFIG_MMC_TIFM_SD is not set -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -# CONFIG_MTD_NAND_MARVELL is not set -CONFIG_MTD_NAND_ORION=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MV643XX_ETH=y -CONFIG_MVEBU_CLK_COMMON=y -CONFIG_MVEBU_MBUS=y -CONFIG_MVMDIO=y -# CONFIG_MVNETA is not set -# CONFIG_MVPP2 is not set -CONFIG_MVSW61XX_PHY=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_KUSER_HELPERS=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NLS=y -CONFIG_NO_BOOTMEM=y -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_ORION_IRQCHIP=y -CONFIG_ORION_TIMER=y -CONFIG_ORION_WATCHDOG=y -CONFIG_OUTER_CACHE=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MVEBU=y -# CONFIG_PCI_V3_SEMI is not set -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -# CONFIG_PHY_MVEBU_CP110_COMPHY is not set -CONFIG_PHY_MVEBU_SATA=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_KIRKWOOD=y -CONFIG_PINCTRL_MVEBU=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PLAT_ORION=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO=y -# CONFIG_POWER_RESET_QNAP is not set -CONFIG_POWER_SUPPLY=y -CONFIG_RATIONAL=y -CONFIG_REFCOUNT_FULL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_SPI=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_MV=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SATA_MV=y -CONFIG_SATA_PMP=y -CONFIG_SCSI=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_FSL=y -# CONFIG_SERIAL_MVEBU_UART is not set -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SG_POOL=y -CONFIG_SOC_BUS=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -# CONFIG_SPI_ARMADA_3700 is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_ORION=y -CONFIG_SPLIT_PTLOCK_CPUS=999999 -CONFIG_SRAM=y -CONFIG_SRAM_EXEC=y -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWPHY=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_ORION=y -# CONFIG_USB_EHCI_HCD_PLATFORM is not set -CONFIG_USB_LED_TRIG=y -# CONFIG_USB_ROLE_SWITCH is not set -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -# CONFIG_VFP is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WAN=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts deleted file mode 100644 index b0b69b46cd..0000000000 --- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-goflexhome.dts +++ /dev/null @@ -1,135 +0,0 @@ -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6281.dtsi" - -/ { - model = "Seagate GoFlex Home"; - compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - aliases { - led-boot = &led_health; - led-failsafe = &led_fault; - led-running = &led_health; - led-upgrade = &led_fault; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x8000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pmx_usb_power_enable: pmx-usb-power-enable { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_white: pmx-led-white { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - - pmx_led_green: pmx-led_green { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - - pmx_led_orange: pmx-led-orange { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - led_health: health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - led_fault: fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - misc { - label = "status:white:misc"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; - linux,default-trigger = "disk-activity"; - }; - }; - - regulators { - compatible = "simple-bus"; - - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&pmx_usb_power_enable>; - pinctrl-names = "default"; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&nand { - status = "okay"; - - chip-delay = <40>; - - partition@0 { - label = "u-boot"; - reg = <0x0000000 0x0100000>; - read-only; - }; - - partition@100000 { - label = "ubi"; - reg = <0x0100000 0xff00000>; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - reg = <0>; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - }; -}; diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts deleted file mode 100644 index eff9102d33..0000000000 --- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts +++ /dev/null @@ -1,207 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500 - * - * (c) 2013 Jonas Gorski <jogo@openwrt.org> - * (c) 2013 Deutsche Telekom Innovation Laboratories - * (c) 2014 Luka Perkov <luka@openwrt.org> - * (c) 2014 Dan Walters <dan@walters.io> - * - */ - -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6282.dtsi" - -/ { - model = "Linksys Audi (EA3500)"; - compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x4000000>; - }; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&pmx_btn_wps &pmx_btn_reset>; - pinctrl-names = "default"; - - wps { - label = "WPS Button"; - linux,code = <KEY_WPS_BUTTON>; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&pmx_led_green_power>; - pinctrl-names = "default"; - - led_power: power { - label = "audi:green:power"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - mvsw61xx { - compatible = "marvell,88e6171"; - status = "okay"; - reg = <0x10>; - - mii-bus = <&mdio>; - cpu-port-0 = <5>; - cpu-port-1 = <6>; - is-indirect; - }; -}; - -&pinctrl { - pmx_led_green_power: pmx-led-green-power { - marvell,pins = "mpp7"; - marvell,function = "gpo"; - }; - - pmx_btn_wps: pmx-btn-wps { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp48"; - marvell,function = "gpio"; - }; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "u_env"; - reg = <0x80000 0x4000>; - }; - - partition@84000 { - label = "s_env"; - reg = <0x84000 0x4000>; - }; - - partition@200000 { - label = "kernel1"; - reg = <0x200000 0x290000>; - }; - - partition@490000 { - label = "rootfs1"; - reg = <0x490000 0x1170000>; - }; - - partition@1600000 { - label = "kernel2"; - reg = <0x1600000 0x290000>; - }; - - partition@1890000 { - label = "rootfs2"; - reg = <0x1890000 0x1170000>; - }; - - partition@2a00000 { - label = "syscfg"; - reg = <0x2a00000 0x1600000>; - }; - - partition@88000 { - label = "unused"; - reg = <0x88000 0x178000>; - }; - }; -}; - -&pciec { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&mdio { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set - * fixed speed and duplex. - */ -ð0 { - status = "okay"; - - ethernet0-port@0 { - speed = <1000>; - duplex = <1>; - }; -}; - -/* eth1 is connected to the switch at port 6. However DSA only supports a - * single CPU port. Upstream uses DSA so they disable this port to avoid confusion. - */ -ð1 { - status = "okay"; - - ethernet1-port@0 { - speed = <1000>; - duplex = <1>; - }; -}; - -/* There is no battery on the board, so the RTC does not keep - * time when there is no power, making it useless. - */ -&rtc { - status = "disabled"; -}; diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts deleted file mode 100644 index 10b119eb01..0000000000 --- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-nsa310b.dts +++ /dev/null @@ -1,141 +0,0 @@ -/dts-v1/; - -#include "kirkwood-nsa3x0-common.dtsi" - -/* - * There are at least two different NSA310 designs. This variant has - * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller. - */ - -/ { - model = "ZyXEL NSA310b"; - compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - - aliases { - led-boot = &led_green_sys; - led-failsafe = &led_red_sys; - led-running = &led_green_sys; - led-upgrade = &led_red_sys; - }; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &uart0; - }; - - ocp@f1000000 { - pinctrl: pin-controller@10000 { - pinctrl-names = "default"; - - pmx_led_esata_green: pmx-led-esata-green { - marvell,pins = "mpp12"; - marvell,function = "gpio"; - }; - - pmx_led_esata_red: pmx-led-esata-red { - marvell,pins = "mpp13"; - marvell,function = "gpio"; - }; - - pmx_led_usb_green: pmx-led-usb-green { - marvell,pins = "mpp15"; - marvell,function = "gpio"; - }; - - pmx_led_usb_red: pmx-led-usb-red { - marvell,pins = "mpp16"; - marvell,function = "gpio"; - }; - - pmx_led_sys_green: pmx-led-sys-green { - marvell,pins = "mpp28"; - marvell,function = "gpio"; - }; - - pmx_led_sys_red: pmx-led-sys-red { - marvell,pins = "mpp29"; - marvell,function = "gpio"; - }; - - pmx_led_hdd_green: pmx-led-hdd-green { - marvell,pins = "mpp41"; - marvell,function = "gpio"; - }; - - pmx_led_hdd_red: pmx-led-hdd-red { - marvell,pins = "mpp42"; - marvell,function = "gpio"; - }; - - }; - - i2c@11000 { - status = "okay"; - - lm85: lm85@2e { - compatible = "national,lm85"; - reg = <0x2e>; - }; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - led_green_sys: green-sys { - label = "nsa310:green:sys"; - gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - led_red_sys: red-sys { - label = "nsa310:red:sys"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - - green-hdd { - label = "nsa310:green:hdd"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - }; - - red-hdd { - label = "nsa310:red:hdd"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - }; - - green-esata { - label = "nsa310:green:esata"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - }; - - red-esata { - label = "nsa310:red:esata"; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - - green-usb { - label = "nsa310:green:usb"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; - }; - - red-usb { - label = "nsa310:red:usb"; - gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; - }; - - green-copy { - label = "nsa310:green:copy"; - gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - }; - - red-copy { - label = "nsa310:red:copy"; - gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; - }; - }; -}; diff --git a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts b/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts deleted file mode 100644 index 5ae66ede2f..0000000000 --- a/target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-on100.dts +++ /dev/null @@ -1,165 +0,0 @@ -/dts-v1/; - -#include "kirkwood.dtsi" -#include "kirkwood-6282.dtsi" - -/ { - model = "Cisco Systems ON100"; - compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - - memory@0 { - device_type = "memory"; - reg = <0x00000000 0x20000000>; - }; - - aliases { - led-boot = &led_health_green; - led-failsafe = &led_health_red; - led-running = &led_health_green; - led-upgrade = &led_health_red; - serial0 = &uart0; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&pmx_btn_reset>; - pinctrl-names = "default"; - - reset { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&pmx_led_health_red &pmx_led_health_green>; - pinctrl-names = "default"; - - led_health_green: health-green { - label = "on100:green:health"; - gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; - - led_health_red: health-red { - label = "on100:red:health"; - gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; - }; - - health2-green { - label = "on100:green:health2"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; - }; - - health2-red { - label = "on100:red:health2"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - }; -}; - -ð0 { - status = "okay"; - - ethernet0-port@0 { - phy-handle = <ðphy0>; - phy-connection-type = "rgmii-id"; - }; -}; - -ð1 { - status = "okay"; - - ethernet1-port@0 { - phy-handle = <ðphy1>; - phy-connection-type = "rgmii-id"; - }; -}; - -&mdio { - status = "okay"; - - ethphy0: ethernet-phy@0 { - /* Marvell 88E1121R */ - compatible = "ethernet-phy-id0141.0cb0", - "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; - - ethphy1: ethernet-phy@1 { - /* Marvell 88E1121R */ - compatible = "ethernet-phy-id0141.0cb0", - "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; -}; - -&nand { - status = "okay"; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x000a0000>; - read-only; - }; - - partition@a0000 { - label = "u-boot environment"; - reg = <0x000a0000 0x00020000>; - read-only; - }; - - partition@c0000 { - label = "kernel"; - reg = <0x000c0000 0x00540000>; - }; - - partition@600000 { - label = "ubi"; - reg = <0x00600000 0x1fa00000>; - }; -}; - -&pinctrl { - pmx_led_health_red: pmx-led-health-red { - marvell,pins = "mpp45"; - marvell,function = "gpio"; - }; - - pmx_led_health_green: pmx-led-health-green { - marvell,pins = "mpp44"; - marvell,function = "gpio"; - }; - - pmx_led_health2_red: pmx-led-health2-red { - marvell,pins = "mpp47"; - marvell,function = "gpio"; - }; - - pmx_led_health2_green: pmx-led-health2-green { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp31"; - marvell,function = "gpio"; - }; -}; - -&sdio { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; diff --git a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch deleted file mode 100644 index 0637c24b63..0000000000 --- a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts -+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts -@@ -6,7 +6,14 @@ - - / { - model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; -- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -+ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -+ -+ aliases { -+ led-boot = &led_green_os; -+ led-failsafe = &led_red_os; -+ led-running = &led_green_os; -+ led-upgrade = &led_red_os; -+ }; - - memory { - device_type = "memory"; -@@ -81,12 +88,12 @@ - &pmx_led_usb_transfer>; - pinctrl-names = "default"; - -- green-os { -+ led_green_os: green-os { - label = "ib62x0:green:os"; - gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; -- default-state = "keep"; -+ default-state = "on"; - }; -- red-os { -+ led_red_os: red-os { - label = "ib62x0:red:os"; - gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; - }; -@@ -118,13 +125,13 @@ - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x600000>; -+ label = "second stage u-boot"; -+ reg = <0x100000 0x200000>; - }; - -- partition@700000 { -- label = "root"; -- reg = <0x0700000 0xf900000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0xfe00000>; - }; - - }; diff --git a/target/linux/kirkwood/patches-4.19/101-iconnect.patch b/target/linux/kirkwood/patches-4.19/101-iconnect.patch deleted file mode 100644 index 935e2dfcf5..0000000000 --- a/target/linux/kirkwood/patches-4.19/101-iconnect.patch +++ /dev/null @@ -1,80 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-iconnect.dts -+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts -@@ -8,6 +8,13 @@ - model = "Iomega Iconnect"; - compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_power_blue; -+ led-failsafe = &led_power_red; -+ led-running = &led_power_blue; -+ led-upgrade = &led_power_red; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; -@@ -16,8 +23,6 @@ - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; -- linux,initrd-start = <0x4500040>; -- linux,initrd-end = <0x4800000>; - }; - - ocp@f1000000 { -@@ -89,12 +94,12 @@ - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; -- power-blue { -+ led_power_blue: power-blue { - label = "power:blue"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; -- default-state = "keep"; -+ default-state = "on"; - }; -- power-red { -+ led_power_red: power-red { - label = "power:red"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; -@@ -146,28 +151,23 @@ - status = "okay"; - - partition@0 { -- label = "uboot"; -- reg = <0x0000000 0xc0000>; -+ label = "u-boot"; -+ reg = <0x0000000 0xe0000>; - }; - -- partition@a0000 { -- label = "env"; -- reg = <0xa0000 0x20000>; -+ partition@e0000 { -+ label = "u-boot environment"; -+ reg = <0xe0000 0x100000>; - }; - - partition@100000 { -- label = "zImage"; -- reg = <0x100000 0x300000>; -- }; -- -- partition@540000 { -- label = "initrd"; -- reg = <0x540000 0x300000>; -+ label = "second stage u-boot"; -+ reg = <0x100000 0x200000>; - }; - -- partition@980000 { -- label = "boot"; -- reg = <0x980000 0x1f400000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0x1fe00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-4.19/102-dockstar.patch b/target/linux/kirkwood/patches-4.19/102-dockstar.patch deleted file mode 100644 index 127f84962c..0000000000 --- a/target/linux/kirkwood/patches-4.19/102-dockstar.patch +++ /dev/null @@ -1,62 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-dockstar.dts -+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts -@@ -8,6 +8,13 @@ - model = "Seagate FreeAgent Dockstar"; - compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; -@@ -42,12 +49,12 @@ - pinctrl-0 = <&pmx_led_green &pmx_led_orange>; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; -@@ -78,18 +85,22 @@ - - partition@0 { - label = "u-boot"; -- reg = <0x0000000 0x100000>; -- read-only; -+ reg = <0x0000000 0xe0000>; -+ }; -+ -+ partition@e0000 { -+ label = "u-boot environment"; -+ reg = <0xe0000 0x100000>; - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -+ label = "second stage u-boot"; -+ reg = <0x100000 0x200000>; - }; - -- partition@500000 { -- label = "data"; -- reg = <0x0500000 0xfb00000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0xfe00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch deleted file mode 100644 index 9313b4bc3e..0000000000 --- a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -@@ -8,6 +8,13 @@ - model = "Iomega StorCenter ix2-200"; - compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_power; -+ led-failsafe = &led_health; -+ led-running = &led_power; -+ led-upgrade = &led_health; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; -@@ -127,16 +134,16 @@ - &pmx_led_rebuild &pmx_led_health >; - pinctrl-names = "default"; - -- power_led { -+ led_power: power_led { - label = "status:white:power_led"; - gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; -- default-state = "keep"; -+ default-state = "on"; - }; - rebuild_led { - label = "status:white:rebuild_led"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - }; -- health_led { -+ led_health: health_led { - label = "status:red:health_led"; - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - }; -@@ -186,18 +193,18 @@ - }; - - partition@a0000 { -- label = "env"; -+ label = "u-boot environment"; - reg = <0xa0000 0x20000>; - read-only; - }; - - partition@100000 { -- label = "uImage"; -+ label = "kernel"; - reg = <0x100000 0x300000>; - }; - - partition@400000 { -- label = "rootfs"; -+ label = "ubi"; - reg = <0x400000 0x1C00000>; - }; - }; -@@ -211,7 +218,7 @@ - }; - - ð0 { -- status = "okay"; -+ status = "disabled"; - ethernet0-port@0 { - speed = <1000>; - duplex = <1>; diff --git a/target/linux/kirkwood/patches-4.19/105-ea4500.patch b/target/linux/kirkwood/patches-4.19/105-ea4500.patch deleted file mode 100644 index 4c3c82bdfd..0000000000 --- a/target/linux/kirkwood/patches-4.19/105-ea4500.patch +++ /dev/null @@ -1,144 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts -+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts -@@ -24,6 +24,10 @@ - }; - - aliases { -+ led-boot = &led_white_health; -+ led-failsafe = &led_white_health; -+ led-running = &led_white_health; -+ led-upgrade = &led_white_health; - serial0 = &uart0; - }; - -@@ -56,9 +60,10 @@ - pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; - pinctrl-names = "default"; - -- white-health { -+ led_white_health: white-health { - label = "viper:white:health"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; - }; - - white-pulse { -@@ -67,9 +72,18 @@ - }; - }; - -- dsa { -- status = "disabled"; -+ mvsw61xx { -+ compatible = "marvell,88e6171"; -+ status = "okay"; -+ reg = <0x10>; -+ -+ mii-bus = <&mdio>; -+ cpu-port-0 = <5>; -+ cpu-port-1 = <6>; -+ is-indirect; -+ }; - -+ dsa { - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; -@@ -161,22 +175,22 @@ - }; - - partition@200000 { -- label = "kernel"; -+ label = "kernel1"; - reg = <0x200000 0x2A0000>; - }; - - partition@4a0000 { -- label = "rootfs"; -+ label = "rootfs1"; - reg = <0x4A0000 0x1760000>; - }; - - partition@1c00000 { -- label = "alt_kernel"; -+ label = "kernel2"; - reg = <0x1C00000 0x2A0000>; - }; - - partition@1ea0000 { -- label = "alt_rootfs"; -+ label = "rootfs2"; - reg = <0x1EA0000 0x1760000>; - }; - -@@ -207,53 +221,6 @@ - - &mdio { - status = "okay"; -- -- switch@10 { -- compatible = "marvell,mv88e6085"; -- #address-cells = <1>; -- #size-cells = <0>; -- reg = <16>; -- -- ports { -- #address-cells = <1>; -- #size-cells = <0>; -- -- port@0 { -- reg = <0>; -- label = "ethernet1"; -- }; -- -- port@1 { -- reg = <1>; -- label = "ethernet2"; -- }; -- -- port@2 { -- reg = <2>; -- label = "ethernet3"; -- }; -- -- port@3 { -- reg = <3>; -- label = "ethernet4"; -- }; -- -- port@4 { -- reg = <4>; -- label = "internet"; -- }; -- -- port@5 { -- reg = <5>; -- label = "cpu"; -- ethernet = <ð0port>; -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; -- }; -- }; -- }; - }; - - &uart0 { -@@ -272,10 +239,14 @@ - }; - - /* eth1 is connected to the switch at port 6. However DSA only supports a -- * single CPU port. So leave this port disabled to avoid confusion. -+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion. - */ - ð1 { -- status = "disabled"; -+ status = "okay"; -+ ethernet1-port@0 { -+ speed = <1000>; -+ duplex = <1>; -+ }; - }; - - /* There is no battery on the board, so the RTC does not keep diff --git a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch deleted file mode 100644 index 82cf90841e..0000000000 --- a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-goflexnet.dts -+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts -@@ -8,6 +8,13 @@ - model = "Seagate GoFlex Net"; - compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; -@@ -85,12 +92,12 @@ - >; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; -@@ -159,18 +166,8 @@ - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -- }; -- -- partition@500000 { -- label = "pogoplug"; -- reg = <0x0500000 0x2000000>; -- }; -- -- partition@2500000 { -- label = "root"; -- reg = <0x02500000 0xd800000>; -+ label = "ubi"; -+ reg = <0x0100000 0x0ff00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch deleted file mode 100644 index df654033fd..0000000000 --- a/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi -+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi -@@ -112,40 +112,16 @@ - - partition@0 { - label = "uboot"; -- reg = <0x0000000 0x0100000>; -+ reg = <0x0000000 0x00c0000>; - read-only; - }; - partition@100000 { - label = "uboot_env"; -- reg = <0x0100000 0x0080000>; -+ reg = <0x00c0000 0x0080000>; - }; -- partition@180000 { -- label = "key_store"; -- reg = <0x0180000 0x0080000>; -- }; -- partition@200000 { -- label = "info"; -- reg = <0x0200000 0x0080000>; -- }; -- partition@280000 { -- label = "etc"; -- reg = <0x0280000 0x0a00000>; -- }; -- partition@c80000 { -- label = "kernel_1"; -- reg = <0x0c80000 0x0a00000>; -- }; -- partition@1680000 { -- label = "rootfs1"; -- reg = <0x1680000 0x2fc0000>; -- }; -- partition@4640000 { -- label = "kernel_2"; -- reg = <0x4640000 0x0a00000>; -- }; -- partition@5040000 { -- label = "rootfs2"; -- reg = <0x5040000 0x2fc0000>; -+ partition@140000 { -+ label = "ubi"; -+ reg = <0x0140000 0x7ec0000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch b/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch deleted file mode 100644 index 36c77cd44a..0000000000 --- a/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-nsa325.dts -+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts -@@ -15,6 +15,13 @@ - model = "ZyXEL NSA325"; - compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_green_sys; -+ led-failsafe = &led_orange_sys; -+ led-running = &led_green_sys; -+ led-upgrade = &led_orange_sys; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; -@@ -162,11 +169,12 @@ - &pmx_led_hdd1_green &pmx_led_hdd1_red>; - pinctrl-names = "default"; - -- green-sys { -+ led_green_sys: green-sys { - label = "nsa325:green:sys"; - gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; - }; -- orange-sys { -+ led_orange_sys: orange-sys { - label = "nsa325:orange:sys"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; diff --git a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch deleted file mode 100644 index 4273eb9af1..0000000000 --- a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch +++ /dev/null @@ -1,87 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts -+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts -@@ -18,12 +18,20 @@ - compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", - "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; - - chosen { -+ bootargs = "console=ttyS0,115200"; - stdout-path = "uart0:115200n8"; - }; - -@@ -37,8 +45,8 @@ - eject { - debounce-interval = <50>; - wakeup-source; -- linux,code = <KEY_EJECTCD>; -- label = "Eject Button"; -+ linux,code = <KEY_RESTART>; -+ label = "Reset"; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; -@@ -48,12 +56,12 @@ - pinctrl-0 = <&pmx_led_green &pmx_led_red>; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "pogoplugv4:green:health"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "pogoplugv4:red:fault"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; -@@ -137,29 +145,19 @@ - #size-cells = <1>; - - partition@0 { -- label = "u-boot"; -- reg = <0x00000000 0x200000>; -+ label = "uboot"; -+ reg = <0x00000000 0x1c0000>; - read-only; - }; - -- partition@200000 { -- label = "uImage"; -- reg = <0x00200000 0x300000>; -- }; -- -- partition@500000 { -- label = "uImage2"; -- reg = <0x00500000 0x300000>; -- }; -- -- partition@800000 { -- label = "failsafe"; -- reg = <0x00800000 0x800000>; -+ partition@1c0000 { -+ label = "uboot_env"; -+ reg = <0x001c0000 0x40000>; - }; - -- partition@1000000 { -- label = "root"; -- reg = <0x01000000 0x7000000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x00200000 0x7e00000>; - }; - }; - }; diff --git a/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch b/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch deleted file mode 100644 index 4b64337c9c..0000000000 --- a/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts -+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts -@@ -20,6 +20,13 @@ - compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", - "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; -@@ -33,12 +40,12 @@ - gpio-leds { - compatible = "gpio-leds"; - -- health { -+ led_health: health { - label = "pogo_e02:green:health"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "pogo_e02:orange:fault"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; -@@ -95,25 +102,26 @@ - status = "okay"; - - partition@0 { -- label = "u-boot"; -- reg = <0x0000000 0x100000>; -+ label = "uboot"; -+ reg = <0x0 0xe0000>; - read-only; - }; - -- partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -+ partition@e0000 { -+ label = "uboot_env"; -+ reg = <0xe0000 0x20000>; - }; - -- partition@500000 { -- label = "pogoplug"; -- reg = <0x0500000 0x2000000>; -+ partition@100000 { -+ label = "second_stage_uboot"; -+ reg = <0x100000 0x100000>; - }; - -- partition@2500000 { -- label = "root"; -- reg = <0x02500000 0x5b00000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0x7e00000>; - }; -+ - }; - - &mdio { diff --git a/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch deleted file mode 100644 index 71d9bba3f1..0000000000 --- a/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/mach-mvebu/Kconfig -+++ b/arch/arm/mach-mvebu/Kconfig -@@ -118,6 +118,7 @@ config MACH_DOVE - config MACH_KIRKWOOD - bool "Marvell Kirkwood boards" - depends on ARCH_MULTI_V5 -+ select ARCH_WANT_LIBATA_LEDS - select CPU_FEROCEON - select GPIOLIB - select KIRKWOOD_CLK diff --git a/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch deleted file mode 100644 index 860d7b0728..0000000000 --- a/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch +++ /dev/null @@ -1,62 +0,0 @@ -The WRT1900AC among other Linksys routers uses a dual-firmware layout. -Dynamically rename the active partition to "ubi". - -Signed-off-by: Imre Kaloz <kaloz@openwrt.org> ---- ---- a/drivers/mtd/ofpart.c -+++ b/drivers/mtd/ofpart.c -@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d - return of_get_property(pp, "compatible", NULL); - } - -+static int mangled_rootblock; -+ - static int parse_fixed_partitions(struct mtd_info *master, - const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -32,6 +34,7 @@ static int parse_fixed_partitions(struct - struct mtd_partition *parts; - struct device_node *mtd_node; - struct device_node *ofpart_node; -+ const char *owrtpart = "ubi"; - const char *partname; - struct device_node *pp; - int nr_parts, i, ret = 0; -@@ -110,9 +113,15 @@ static int parse_fixed_partitions(struct - parts[i].size = of_read_number(reg + a_cells, s_cells); - parts[i].of_node = pp; - -- partname = of_get_property(pp, "label", &len); -- if (!partname) -- partname = of_get_property(pp, "name", &len); -+ if (mangled_rootblock && (i == mangled_rootblock)) { -+ partname = owrtpart; -+ } else { -+ partname = of_get_property(pp, "label", &len); -+ -+ if (!partname) -+ partname = of_get_property(pp, "name", &len); -+ } -+ - parts[i].name = partname; - - if (of_get_property(pp, "read-only", &len)) -@@ -219,6 +228,18 @@ static int __init ofpart_parser_init(voi - return 0; - } - -+static int __init active_root(char *str) -+{ -+ get_option(&str, &mangled_rootblock); -+ -+ if (!mangled_rootblock) -+ return 1; -+ -+ return 1; -+} -+ -+__setup("mangled_rootblock=", active_root); -+ - static void __exit ofpart_parser_exit(void) - { - deregister_mtd_parser(&ofpart_parser); |