aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network4
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/03_gpio_switches3
-rw-r--r--target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts211
-rw-r--r--target/linux/ath79/image/generic.mk8
4 files changed, 226 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index e66eb938fd..037e5777ed 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -118,6 +118,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
+ librerouter,librerouter-v1)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "5:wan" "6@eth1" "4:lan"
+ ;;
nec,wg800hp)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
index 4f08fab525..dc5cbf6e9c 100755
--- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches
@@ -14,6 +14,9 @@ dlink,dir-825-c1|\
dlink,dir-835-a1)
ucidef_add_gpio_switch "wan_led_auto" "WAN LED Auto" "20" "0"
;;
+librerouter,librerouter-v1)
+ ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0"
+ ;;
ubnt,nanostation-ac)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3"
;;
diff --git a/target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts b/target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts
new file mode 100644
index 0000000000..9e2f67977a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_librerouter_librerouter-v1.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ compatible = "librerouter,librerouter-v1", "qca,qca9558";
+ model = "LibreRouter v1";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &system;
+ led-failsafe = &system;
+ led-running = &system;
+ led-upgrade = &system;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system: system {
+ label = "librerouter-v1:green:system";
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wifi_green {
+ label = "librerouter-v1:green:wlan2g";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ status_blue {
+ label = "librerouter-v1:blue:status";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ button {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <1000>;
+ always-running;
+ };
+
+};
+
+&pcie0 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&pcie1 {
+ status = "okay";
+
+ wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0x7c0000>;
+ };
+
+ partition@810000 {
+ label = "fw2";
+ reg = <0x810000 0x7d0000>;
+ };
+
+ partition@fd0000 {
+ label = "res";
+ reg = <0xfd0000 0x20000>;
+ };
+
+ ART: partition@ff0000 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ qca,ar8327-initvals = <
+ 0x04 0x87600000 /* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, rx_delay 10 */
+ 0x0c 0x00000080 /* PORT6: SGMII */
+ 0x10 0x81000080 /* POWER_ON_STRAP: LED open drain, SerDes auto-neg disabled */
+ 0x50 0xcf37cf37 /* LED_CTRL0 */
+ 0x54 0xcf37cf37 /* LED_CTRL1 */
+ 0x58 0xcf37cf37 /* LED_CTRL2 */
+ 0x5c 0x0 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ pll-data = <0xa6000000 0x00000101 0x00001616>;
+ mtd-mac-address = <&ART 0x0>;
+
+ phy-handle = <&phy0>;
+
+};
+
+&eth1 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+ mtd-mac-address = <&ART 0x6>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&ART 0x1000>;
+ mtd-mac-address = <&ART 0xc>;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index c68e6a4a90..6e3dcf0bd8 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -394,6 +394,14 @@ define Device/iodata_wn-ag300dgr
endef
TARGET_DEVICES += iodata_wn-ag300dgr
+define Device/librerouter_librerouter-v1
+ ATH_SOC := qca9558
+ DEVICE_TITLE := LibreRouter v1
+ IMAGE_SIZE := 7936k
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2
+endef
+TARGET_DEVICES += librerouter_librerouter-v1
+
define Device/nec_wg800hp
ATH_SOC := qca9563
DEVICE_TITLE := NEC Aterm WG800HP