diff options
Diffstat (limited to 'target')
4 files changed, 243 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/qca9558_domywifi_dw33d.dts b/target/linux/ath79/dts/qca9558_domywifi_dw33d.dts new file mode 100644 index 0000000000..b71bec4e04 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_domywifi_dw33d.dts @@ -0,0 +1,217 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca9557.dtsi" + +/ { + compatible = "domywifi,dw33d", "qca,qca9558"; + model = "DomyWifi DW33D"; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + }; + + leds { + compatible = "gpio-leds"; + + led_system: system { + label = "dw33d:blue:system"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + mmc { + label = "dw33d:blue:mmc"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port0>; + linux,default-trigger = "usbport"; + }; + + usb { + label = "dw33d:blue:usb"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + trigger-sources = <&hub_port1>; + linux,default-trigger = "usbport"; + }; + + wlan2g { + label = "dw33d:blue:wlan2g"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + internet { + label = "dw33d:blue:internet"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; +}; + +&pcie0 { + status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + }; +}; + +&uart { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port0: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&spi { + status = "okay"; + + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + }; + + partition@50000 { + label = "oem-firmware"; + reg = <0x50000 0xfa0000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x500000>; + }; + + partition@500000 { + label = "ubi"; + reg = <0x500000 0x5b00000>; + }; + + partition@6000000 { + label = "oem-backup"; + reg = <0x6000000 0x2000000>; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + + qca,ar8327-initvals = < + 0x04 0x87600000 /* PORT0 PAD MODE CTRL */ + 0x0c 0x00080080 /* PORT6 PAD MODE CTRL */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x0000007e /* PORT6 STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + pll-data = <0x56000000 0x00000101 0x00001616>; + phy-handle = <&phy0>; +}; + +ð1 { + status = "okay"; + + mtd-mac-address = <&art 0x6>; + pll-data = <0x03000101 0x00000101 0x00001616>; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0xc>; +}; diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk index 5a61be3545..ab4299ef37 100644 --- a/target/linux/ath79/image/nand.mk +++ b/target/linux/ath79/image/nand.mk @@ -47,6 +47,24 @@ define Device/aerohive_hiveap-121 endef TARGET_DEVICES += aerohive_hiveap-121 +define Device/domywifi_dw33d + SOC := qca9558 + DEVICE_VENDOR := DomyWifi + DEVICE_MODEL := DW33D + DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport \ + kmod-ath10k-ct ath10k-firmware-qca988x-ct + KERNEL_SIZE := 5120k + IMAGE_SIZE := 98304k + BLOCKSIZE := 128k + PAGESIZE := 2048 + UBINIZE_OPTS := -E 5 + IMAGES += factory.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \ + check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += domywifi_dw33d + define Device/glinet_gl-ar300m-common-nand SOC := qca9531 DEVICE_VENDOR := GL.iNet diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network index f42b1ea9c2..06a2aec471 100755 --- a/target/linux/ath79/nand/base-files/etc/board.d/02_network +++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network @@ -12,6 +12,10 @@ ath79_setup_interfaces() mikrotik,routerboard-922uags-5hpacd) ucidef_set_interface_lan "eth0" ;; + domywifi,dw33d) + ucidef_add_switch "switch0" \ + "0@eth0" "1:wan" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" + ;; glinet,gl-ar750s-nor|\ glinet,gl-ar750s-nor-nand) ucidef_add_switch "switch0" \ diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 1989332f81..8a1bed58c1 100644 --- a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -10,6 +10,10 @@ board=$(board_name) case "$FIRMWARE" in "ath10k/cal-pci-0000:00:00.0.bin") case $board in + domywifi,dw33d) + caldata_extract "art" 0x5000 0x844 + ath10k_patch_mac $(mtd_get_mac_binary art 0x12) + ;; glinet,gl-ar750s-nor|\ glinet,gl-ar750s-nor-nand) caldata_extract "art" 0x5000 0x844 |