aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/ipq40xx/patches-4.14/716-essedma-vlan-double-tag.patch128
1 files changed, 0 insertions, 128 deletions
diff --git a/target/linux/ipq40xx/patches-4.14/716-essedma-vlan-double-tag.patch b/target/linux/ipq40xx/patches-4.14/716-essedma-vlan-double-tag.patch
deleted file mode 100644
index e268351273..0000000000
--- a/target/linux/ipq40xx/patches-4.14/716-essedma-vlan-double-tag.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From: Sven Eckelmann <sven@narfation.org>
-Date: Wed, 8 Feb 2017 16:26:00 +0100
-Subject: [PATCH] ipq40xx: Fix ar40xx port separation
-
-It is currently not possible to submit (or receive) VLAN tagged frames over
-the ar40xx PHY switch and the edma ethernet device.
-
-This can be worked around by disabling enable_vlan. The separation of the
-eth0 and eth1 ports is then done by the vlan_tag information from the
-device tree. But the ar40xx PHY switch then also has to parse the word3
-port bitmap (word3) from the TDP when data was received from the CPU port
-(0).
-
-IssueID: #2857
-
-Forwarded: no
- The ar40xx.c change was forwarded to Xiaofei Shen <xiaofeis@codeaurora.org>
- (QCA). But John Crispin will rewrite the driver anyway and we have to check
- later if this change is required in his driver too.
----
- drivers/net/phy/ar40xx.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/ar40xx.c
-+++ b/drivers/net/phy/ar40xx.c
-@@ -1200,7 +1200,11 @@ ar40xx_init_port(struct ar40xx_priv *pri
- ar40xx_rmw(priv, AR40XX_REG_PORT_STATUS(port),
- AR40XX_PORT_AUTO_LINK_EN, 0);
-
-- ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0);
-+ /* CPU port is setting headers to limit output ports */
-+ if (port == 0)
-+ ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0x8);
-+ else
-+ ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0);
-
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0);
-
-@@ -1243,6 +1247,10 @@ ar40xx_init_globals(struct ar40xx_priv *
- t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) |
- AR40XX_PORT0_FC_THRESH_OFF_DFLT;
- ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t);
-+
-+ /* set service tag to 802.1q */
-+ t = ETH_P_8021Q | AR40XX_ESS_SERVICE_TAG_STAG;
-+ ar40xx_write(priv, AR40XX_ESS_SERVICE_TAG, t);
- }
-
- static void
-@@ -1568,7 +1576,11 @@ ar40xx_setup_port(struct ar40xx_priv *pr
- u32 pvid = priv->vlan_id[priv->pvid[port]];
-
- if (priv->vlan) {
-- egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD;
-+ if (priv->vlan_tagged & BIT(port))
-+ egress = AR40XX_PORT_VLAN1_OUT_MODE_TAG;
-+ else
-+ egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD;
-+
- ingress = AR40XX_IN_SECURE;
- } else {
- egress = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH;
-@@ -1579,8 +1591,17 @@ ar40xx_setup_port(struct ar40xx_priv *pr
- t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S;
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t);
-
-- t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP;
-- t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S;
-+ t = egress << AR40XX_PORT_VLAN1_OUT_MODE_S;
-+
-+ /* set CPU port to core port */
-+ if (port == 0)
-+ t |= AR40XX_PORT_VLAN1_CORE_PORT;
-+
-+ if (priv->vlan_tagged & BIT(port))
-+ t |= AR40XX_PORT_VLAN1_PORT_VLAN_PROP;
-+ else
-+ t |= AR40XX_PORT_VLAN1_PORT_TLS_MODE;
-+
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
-
- t = members;
---- a/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
-+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
-@@ -970,7 +970,6 @@ static int edma_axi_probe(struct platfor
- edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops;
- edma_netdev[i]->max_mtu = 9000;
- edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM
-- | NETIF_F_HW_VLAN_CTAG_TX
- | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_GRO;
- edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
-@@ -982,10 +981,10 @@ static int edma_axi_probe(struct platfor
- NETIF_F_TSO | NETIF_F_GRO;
-
- #ifdef CONFIG_RFS_ACCEL
-- edma_netdev[i]->features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
-- edma_netdev[i]->hw_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
-- edma_netdev[i]->vlan_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
-- edma_netdev[i]->wanted_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
-+ edma_netdev[i]->features |= NETIF_F_NTUPLE;
-+ edma_netdev[i]->hw_features |= NETIF_F_NTUPLE;
-+ edma_netdev[i]->vlan_features |= NETIF_F_NTUPLE;
-+ edma_netdev[i]->wanted_features |= NETIF_F_NTUPLE;
- #endif
- edma_set_ethtool_ops(edma_netdev[i]);
-
---- a/drivers/net/phy/ar40xx.h
-+++ b/drivers/net/phy/ar40xx.h
-@@ -151,6 +151,9 @@ struct ar40xx_mib_desc {
- #define AR40XX_MIB_FUNC_NO_OP 0x0
- #define AR40XX_MIB_FUNC_FLUSH 0x1
-
-+#define AR40XX_ESS_SERVICE_TAG 0x48
-+#define AR40XX_ESS_SERVICE_TAG_STAG BIT(17)
-+
- #define AR40XX_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
- #define AR40XX_PORT_SPEED BITS(0, 2)
- #define AR40XX_PORT_STATUS_SPEED_S 0
-@@ -179,6 +182,8 @@ struct ar40xx_mib_desc {
- #define AR40XX_PORT_VLAN0_DEF_CVID_S 16
-
- #define AR40XX_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8)
-+#define AR40XX_PORT_VLAN1_CORE_PORT BIT(9)
-+#define AR40XX_PORT_VLAN1_PORT_TLS_MODE BIT(7)
- #define AR40XX_PORT_VLAN1_PORT_VLAN_PROP BIT(6)
- #define AR40XX_PORT_VLAN1_OUT_MODE BITS(12, 2)
- #define AR40XX_PORT_VLAN1_OUT_MODE_S 12