diff options
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/ramips/dts/mt7621_yuncore_ax820.dts | 32 |
1 files changed, 26 insertions, 6 deletions
diff --git a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts index fe0e9daf7f..9638f1f060 100644 --- a/target/linux/ramips/dts/mt7621_yuncore_ax820.dts +++ b/target/linux/ramips/dts/mt7621_yuncore_ax820.dts @@ -10,10 +10,10 @@ model = "YunCore AX820"; aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_green; - led-running = &led_status_green; - led-upgrade = &led_status_green; + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; }; chosen { @@ -23,10 +23,30 @@ leds { compatible = "gpio-leds"; - led_status_green: status_green { - label = "green:status"; + /* At least 2 AX820 variants are known and cannot be distinguished (same hw rev): + - System LED green GPIO 15; red and blue apparently not connected + - System LED red GPIO 15, WLAN2G LED green GPIO 14, WLAN5G LED blue GPIO 16 + The canonical values taken from a Yuncore datasheet are: + - System LED green GPIO 15, WLAN2G LED blue GPIO 14, WLAN5G LED red GPIO 16 + All 3 colors relate to the same single RGB LED showing up on the front lightpipe. + As a result, all 3 LEDs are defined even if only one may be available, and + the color information is absent as it is not reliable */ + wlan2g { + label = "wlan2g"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0radio"; + }; + + led_system: system { + label = "system"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; + + wlan5g { + label = "wlan5g"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1radio"; + }; }; watchdog { |