diff options
Diffstat (limited to 'target')
42 files changed, 945 insertions, 8865 deletions
diff --git a/target/linux/lantiq/base-files/lib/preinit/05_set_preinit_iface_lantiq b/target/linux/lantiq/ase/base-files/lib/preinit/05_set_preinit_iface_lantiq index 5f059ee974..5f059ee974 100644 --- a/target/linux/lantiq/base-files/lib/preinit/05_set_preinit_iface_lantiq +++ b/target/linux/lantiq/ase/base-files/lib/preinit/05_set_preinit_iface_lantiq diff --git a/target/linux/lantiq/ase/config-5.10 b/target/linux/lantiq/ase/config-5.10 index 7007016dde..195e49df69 100644 --- a/target/linux/lantiq/ase/config-5.10 +++ b/target/linux/lantiq/ase/config-5.10 @@ -16,6 +16,7 @@ CONFIG_NLS=y CONFIG_SGL_ALLOC=y CONFIG_SOC_AMAZON_SE=y CONFIG_SOC_TYPE_XWAY=y +CONFIG_SWCONFIG=y CONFIG_TARGET_ISA_REV=1 CONFIG_USB=y CONFIG_USB_COMMON=y diff --git a/target/linux/lantiq/ase/config-5.4 b/target/linux/lantiq/ase/config-5.4 index 9e4d047059..34187d809e 100644 --- a/target/linux/lantiq/ase/config-5.4 +++ b/target/linux/lantiq/ase/config-5.4 @@ -16,6 +16,7 @@ CONFIG_NLS=y CONFIG_SGL_ALLOC=y CONFIG_SOC_AMAZON_SE=y # CONFIG_SOC_XWAY is not set +CONFIG_SWCONFIG=y CONFIG_TARGET_ISA_REV=1 CONFIG_USB=y CONFIG_USB_COMMON=y diff --git a/target/linux/lantiq/config-5.10 b/target/linux/lantiq/config-5.10 index a630b9db26..70f240d779 100644 --- a/target/linux/lantiq/config-5.10 +++ b/target/linux/lantiq/config-5.10 @@ -129,7 +129,6 @@ CONFIG_LANTIQ_DT_NONE=y # CONFIG_LANTIQ_ETOP is not set CONFIG_LANTIQ_WDT=y # CONFIG_LANTIQ_XRX200 is not set -# CONFIG_LANTIQ_XRX200_LEGACY is not set CONFIG_LEDS_GPIO=y CONFIG_LIBFDT=y CONFIG_LLD_VERSION=0 @@ -211,7 +210,6 @@ CONFIG_SPI_MASTER=y CONFIG_SPI_MEM=y CONFIG_SRCU=y CONFIG_SWAP_IO_SPACE=y -CONFIG_SWCONFIG=y CONFIG_SWPHY=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y @@ -228,4 +226,3 @@ CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TINY_SRCU=y CONFIG_USE_OF=y CONFIG_WATCHDOG_CORE=y -# CONFIG_XRX200_PHY_FW is not set diff --git a/target/linux/lantiq/config-5.4 b/target/linux/lantiq/config-5.4 index 7398a23489..5112a9b5ec 100644 --- a/target/linux/lantiq/config-5.4 +++ b/target/linux/lantiq/config-5.4 @@ -130,7 +130,6 @@ CONFIG_LANTIQ_DT_NONE=y # CONFIG_LANTIQ_ETOP is not set CONFIG_LANTIQ_WDT=y # CONFIG_LANTIQ_XRX200 is not set -# CONFIG_LANTIQ_XRX200_LEGACY is not set CONFIG_LEDS_GPIO=y CONFIG_LIBFDT=y CONFIG_LOCK_DEBUGGING_SUPPORT=y @@ -207,7 +206,6 @@ CONFIG_SPI_MASTER=y CONFIG_SPI_MEM=y CONFIG_SRCU=y CONFIG_SWAP_IO_SPACE=y -CONFIG_SWCONFIG=y CONFIG_SWPHY=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y @@ -224,4 +222,3 @@ CONFIG_TICK_CPU_ACCOUNTING=y CONFIG_TINY_SRCU=y CONFIG_USE_OF=y CONFIG_WATCHDOG_CORE=y -# CONFIG_XRX200_PHY_FW is not set diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi index 22d5509a33..27858be28f 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9.dtsi @@ -120,22 +120,6 @@ ranges = <0x0 0x203000 0x100>; big-endian; - gphy0: gphy@20 { - compatible = "lantiq,xrx200-gphy"; - reg = <0x20 0x4>; - - resets = <&reset0 31 30>, <&reset1 7 7>; - reset-names = "gphy", "gphy2"; - }; - - gphy1: gphy@68 { - compatible = "lantiq,xrx200-gphy"; - reg = <0x68 0x4>; - - resets = <&reset0 29 28>, <&reset1 6 6>; - reset-names = "gphy", "gphy2"; - }; - reset0: reset-controller@10 { compatible = "lantiq,xrx200-reset"; reg = <0x10 4>, <0x14 4>; @@ -446,22 +430,71 @@ }; }; - eth0: eth@e108000 { + gswip: switch@e108000 { + compatible = "lantiq,xrx200-gswip"; #address-cells = <1>; #size-cells = <0>; + reg = < 0xe108000 0x3000 /* switch */ + 0xe10b100 0x70 /* mdio */ + 0xe10b1d8 0x30 /* mii */ + >; + + dsa,member = <0 0>; + + gswip_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@6 { + reg = <0x6>; + label = "cpu"; + ethernet = <ð0>; + }; + }; + + gswip_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + }; + + gphy-fw { + compatible = "lantiq,xrx200-gphy-fw", "lantiq,gphy-fw"; + lantiq,rcu = <&rcu0>; + #address-cells = <1>; + #size-cells = <0>; + + gphy0: gphy@20 { + reg = <0x20>; + + resets = <&reset0 31 30>; + reset-names = "gphy"; + }; + + gphy1: gphy@68 { + reg = <0x68>; + + resets = <&reset0 29 28>; + reset-names = "gphy"; + }; + }; + }; + + eth0: eth@e10b308 { compatible = "lantiq,xrx200-net"; - reg = < 0xe108000 0x3000 /* switch */ - 0xe10b100 0x70 /* mdio */ - 0xe10b1d8 0x30 /* mii */ - 0xe10b308 0x30 /* pmac */ - >; + reg = <0xe10b308 0x30>; /* pmac */ interrupt-parent = <&icu0>; - interrupts = <75 73 72>; - resets = <&reset0 21 16>, <&reset0 8 8>; - reset-names = "switch", "ppe"; - lantiq,phys = <&gphy0>, <&gphy1>; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; + interrupts = <73>, <72>; + interrupt-names = "tx", "rx"; + resets = <&reset0 21 16>, <&reset0 8 8>, <&reset0 3 3>; + reset-names = "switch", "ppe", "ppe_dsp"; + #address-cells = <1>; + #size-cells = <0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; }; mei@e116000 { diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts index 84a2a93428..77fcff3392 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_alphanetworks_asl56026.dts @@ -69,52 +69,38 @@ }; }; -ð0 { - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <3>; - phy-mode = "mii"; - phy-handle = <&phy14>; - }; - }; +&gphy0 { + lantiq,gphy-mode = <GPHY_MODE_FE>; +}; - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; +&gphy1 { + lantiq,gphy-mode = <GPHY_MODE_FE>; +}; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; +&gswip_mdio { + phy11: ethernet-phy@11 { + reg = <0x11>; + }; - phy14: ethernet-phy@14 { - reg = <0x14>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; + phy14: ethernet-phy@14 { + reg = <0x14>; }; }; -&gphy0 { - lantiq,gphy-mode = <GPHY_MODE_FE>; -}; +&gswip_ports { + port@2 { + reg = <2>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; -&gphy1 { - lantiq,gphy-mode = <GPHY_MODE_FE>; + port@3 { + reg = <3>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy14>; + }; }; &localbus { diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts index c924a2b275..4b7343207e 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_arv7519rw22.dts @@ -94,72 +94,7 @@ }; ð0 { - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&boardconfig 0x16>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <3>; - phy-mode = "mii"; - phy-handle = <&phy12>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "mii"; - phy-handle = <&phy14>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy12: ethernet-phy@12 { - reg = <0x12>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy14: ethernet-phy@14 { - reg = <0x14>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - }; + mtd-mac-address = <&boardconfig 0x16>; }; &gphy0 { @@ -183,6 +118,62 @@ }; }; +&gswip { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan5"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@3 { + reg = <3>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy12>; + }; + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + port@5 { + reg = <5>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy14>; + }; +}; + &localbus { flash@0 { compatible = "lantiq,nor"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts index e7c5532145..fb771edcb7 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vg3503j.dts @@ -54,56 +54,6 @@ }; }; -ð0 { - pinctrl-0 = <&mdio_pins>, - <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>, - <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>; - - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - lantiq,switch; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,led1h = <0x70>; - lantiq,led1l = <0x00>; - lantiq,led2h = <0x00>; - lantiq,led2l = <0x03>; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,led1h = <0x70>; - lantiq,led1l = <0x00>; - lantiq,led2h = <0x00>; - lantiq,led2l = <0x03>; - }; - }; -}; - &gphy0 { lantiq,gphy-mode = <GPHY_MODE_GE>; }; @@ -112,6 +62,44 @@ lantiq,gphy-mode = <GPHY_MODE_GE>; }; +&gswip { + pinctrl-0 = <&gphy0_led0_pins>, <&gphy0_led1_pins>, <&gphy0_led2_pins>, + <&gphy1_led0_pins>, <&gphy1_led1_pins>, <&gphy1_led2_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy11: ethernet-phy@11 { + reg = <0x11>; + lantiq,led1h = <0x70>; + lantiq,led1l = <0x00>; + lantiq,led2h = <0x00>; + lantiq,led2l = <0x03>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + lantiq,led1h = <0x70>; + lantiq,led1l = <0x00>; + lantiq,led2h = <0x00>; + lantiq,led2l = <0x03>; + }; +}; + +&gswip_ports { + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; +}; + &localbus { flash@0 { compatible = "lantiq,nor"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi index 696a61a861..8faf335c02 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7510kw22.dtsi @@ -107,78 +107,7 @@ }; ð0 { - pinctrl-0 = <&mdio_pins>, - <&gphy0_led0_pins>, - <&gphy1_led0_pins>, <&gphy1_led1_pins>; - pinctrl-names = "default"; - - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&boardconfig 0x16>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "mii"; - phy-handle = <&phy1>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <3>; - phy-mode = "mii"; - phy-handle = <&phy12>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "mii"; - phy-handle = <&phy14>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy12: ethernet-phy@12 { - reg = <0x12>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy14: ethernet-phy@14 { - reg = <0x14>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - }; + mtd-mac-address = <&boardconfig 0x16>; }; &gphy0 { @@ -203,6 +132,64 @@ }; }; +&gswip { + pinctrl-0 = <&mdio_pins>, + <&gphy0_led0_pins>, + <&gphy1_led0_pins>, <&gphy1_led1_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "wan"; + phy-mode = "mii"; + phy-handle = <&phy1>; + }; + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@3 { + reg = <3>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy12>; + }; + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + port@5 { + reg = <5>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy14>; + }; +}; + &localbus { flash@0 { compatible = "lantiq,nor"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi index 08d9148faf..7c3ab53d73 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_arcadyan_vgv7519.dtsi @@ -127,76 +127,8 @@ }; ð0 { - pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led0_pins>; - pinctrl-names = "default"; - - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&boardconfig 0x16>; - mtd-mac-address-increment = <1>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; }; &gphy0 { @@ -221,6 +153,62 @@ }; }; +&gswip { + pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led0_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan4"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + port@1 { + reg = <1>; + label = "lan3"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; +}; + &localbus { flash@0 { compatible = "lantiq,nor"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi index 09c95375d5..664327a861 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi @@ -114,72 +114,6 @@ }; }; -ð0 { - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; - }; - - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - &gphy0 { lantiq,gphy-mode = <GPHY_MODE_GE>; }; @@ -208,6 +142,61 @@ }; }; +&gswip { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x0>; + gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + + phy13: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan3"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; +}; + &pcie0 { gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts index 09c97a6454..c4b92f9f91 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3390.dts @@ -106,72 +106,6 @@ }; }; -ð0 { - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; - }; - - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; - }; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - &gphy0 { lantiq,gphy-mode = <GPHY_MODE_GE>; }; @@ -207,6 +141,61 @@ }; }; +&gswip { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x0>; + gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + + phy13: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan3"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; +}; + &spi { status = "okay"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi index c7e600aace..dafff26f1b 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi @@ -81,71 +81,8 @@ }; ð0 { - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&urlader 0xa91>; - mtd-mac-address-increment = <(-2)>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rmii"; - phy-handle = <&phy0>; - }; - - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rmii"; - phy-handle = <&phy1>; - }; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x00>; - compatible = "ethernet-phy-ieee802.3-c22"; - reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; - }; - - phy1: ethernet-phy@1 { - reg = <0x01>; - compatible = "ethernet-phy-ieee802.3-c22"; - reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; - }; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; + mtd-mac-address = <&urlader 0xa91>; + mtd-mac-address-increment = <(-2)>; }; &gphy0 { @@ -171,6 +108,61 @@ }; +&gswip { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x00>; + reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + + phy1: ethernet-phy@1 { + reg = <0x01>; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + + phy13: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan3"; + phy-mode = "rmii"; + phy-handle = <&phy0>; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "rmii"; + phy-handle = <&phy1>; + }; + + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; +}; + &pcie0 { status = "okay"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts index 3b1703dd3c..a9d20915ea 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7412.dts @@ -181,33 +181,17 @@ lantiq,gphy-mode = <GPHY_MODE_FE>; }; -ð0 { - lantiq,phys = <&gphy0>; - - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; - lantiq,switch; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; +&gswip_mdio { + phy11: ethernet-phy@11 { + reg = <0x11>; }; +}; - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; +&gswip_ports { + port@2 { + reg = <2>; + label = "lan"; + phy-mode = "internal"; + phy-handle = <&phy11>; }; }; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts index 3894fecb43..3be20e1ff0 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7430.dts @@ -185,70 +185,6 @@ lantiq,gphy-mode = <GPHY_MODE_FE>; }; -ð0 { - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <3>; - phy-mode = "mii"; - phy-handle = <&phy12>; - }; - - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "mii"; - phy-handle = <&phy14>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - - phy12: ethernet-phy@12 { - reg = <0x12>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - - phy14: ethernet-phy@14 { - reg = <0x14>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - &gpio { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -262,6 +198,48 @@ }; }; +&gswip_mdio { + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + }; +}; + +&gswip_ports { + port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@3 { + reg = <3>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy12>; + }; + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + port@5 { + reg = <5>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy14>; + }; +}; + &usb_phy0 { status = "okay"; }; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts index f817b3a41b..e24ee787f1 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_bt_homehub-v5a.dts @@ -114,74 +114,6 @@ }; }; -ð0 { - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - &gphy0 { lantiq,gphy-mode = <GPHY_MODE_GE>; }; @@ -215,6 +147,62 @@ }; }; +&gswip { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan3"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + port@1 { + reg = <1>; + label = "lan4"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; +}; + &localbus { flash@1 { compatible = "lantiq,nand-xway"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts index 8917d359e7..eea27a2a1f 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_buffalo_wbmr-300hpd.dts @@ -152,64 +152,6 @@ }; }; -ð0 { - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <3>; - phy-mode = "mii"; - phy-handle = <&phy12>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "mii"; - phy-handle = <&phy14>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy12: ethernet-phy@12 { - reg = <0x12>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - phy14: ethernet-phy@14 { - reg = <0x14>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - &gphy0 { lantiq,gphy-mode = <GPHY_MODE_FE>; }; @@ -237,6 +179,48 @@ }; }; +&gswip_mdio { + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + }; +}; + +&gswip_ports { + port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@3 { + reg = <3>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy12>; + }; + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + port@5 { + reg = <5>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy14>; + }; +}; + &spi { status = "okay"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi index 9cac3e6ec0..8df81111fa 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_lantiq_easy80920.dtsi @@ -97,83 +97,6 @@ }; }; -ð0 { - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - interface@1 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - lantiq,wan; - - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - &gphy0 { lantiq,gphy-mode = <GPHY_MODE_GE>; }; @@ -210,6 +133,62 @@ }; }; +&gswip { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan4"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + port@1 { + reg = <1>; + label = "lan3"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; +}; + &spi { status = "okay"; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts index be4810c431..b817ff3224 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_netgear_dm200.dts @@ -83,37 +83,23 @@ }; }; -ð0 { - lantiq,phys = <&gphy1>; - - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; +&gphy1 { + lantiq,gphy-mode = <GPHY_MODE_FE>; +}; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; - }; +&gswip_mdio { + phy13: ethernet-phy@13 { + reg = <0x13>; }; }; -&gphy1 { - lantiq,gphy-mode = <GPHY_MODE_FE>; +&gswip_ports { + port@4 { + reg = <4>; + label = "lan"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; }; &pcie0 { diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi index d33b817f2d..10389e539f 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_tdw89x0.dtsi @@ -110,66 +110,7 @@ }; ð0 { - pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>; - pinctrl-names = "default"; - - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&ath9k_cal 0xf100>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; + mtd-mac-address = <&ath9k_cal 0xf100>; }; &gphy0 { @@ -199,6 +140,54 @@ }; }; +&gswip { + pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x0>; + // reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan2"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + port@5 { + reg = <5>; + label = "lan1"; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; +}; + &pcie0 { pcie@0 { reg = <0 0 0 0 0>; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi index aa76f66267..d3d8907860 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_tplink_vr200.dtsi @@ -100,66 +100,7 @@ }; ð0 { - pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>; - pinctrl-names = "default"; - - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mtd-mac-address = <&romfile 0xf100>; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; + mtd-mac-address = <&romfile 0xf100>; }; &gphy0 { @@ -189,6 +130,54 @@ }; }; +&gswip { + pinctrl-0 = <&mdio_pins>, <&gphy0_led1_pins>, <&gphy1_led1_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x0>; + // reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan3"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + port@2 { + reg = <2>; + label = "lan2"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@4 { + reg = <4>; + label = "lan1"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + port@5 { + reg = <5>; + label = "lan4"; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; +}; + &pcie0 { pcie@0 { reg = <0 0 0 0 0>; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi index ee951dc3be..ff7dce3477 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_zyxel_p-2812hnu-fx.dtsi @@ -110,80 +110,6 @@ }; }; -ð0 { - pinctrl-0 = <&mdio_pins>, - <&gphy0_led1_pins>, <&gphy0_led2_pins>, - <&gphy1_led1_pins>, <&gphy1_led2_pins>; - pinctrl-names = "default"; - - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; - lantiq,switch; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - ethernet@5 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <5>; - phy-mode = "rgmii"; - phy-handle = <&phy5>; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy5: ethernet-phy@5 { - reg = <0x5>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - }; - }; -}; - &gphy0 { lantiq,gphy-mode = <GPHY_MODE_GE>; }; @@ -221,6 +147,64 @@ }; }; +&gswip { + pinctrl-0 = <&mdio_pins>, + <&gphy0_led1_pins>, <&gphy0_led2_pins>, + <&gphy1_led1_pins>, <&gphy1_led2_pins>; + pinctrl-names = "default"; +}; + +&gswip_mdio { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + }; +}; + +&gswip_ports { + port@0 { + reg = <0>; + label = "lan1"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + port@1 { + reg = <1>; + label = "lan2"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + port@2 { + reg = <2>; + label = "lan3"; + phy-mode = "internal"; + phy-handle = <&phy11>; + }; + port@4 { + reg = <4>; + label = "lan4"; + phy-mode = "internal"; + phy-handle = <&phy13>; + }; + port@5 { + reg = <5>; + label = "wan"; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; +}; + &pci0 { status = "okay"; diff --git a/target/linux/lantiq/image/tp-link.mk b/target/linux/lantiq/image/tp-link.mk index cebdf46e12..e269aacd02 100644 --- a/target/linux/lantiq/image/tp-link.mk +++ b/target/linux/lantiq/image/tp-link.mk @@ -1,5 +1,10 @@ DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION +define Device/dsa-migration + DEVICE_COMPAT_VERSION := 1.1 + DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA +endef + define Device/lantiqTpLink DEVICE_VENDOR := TP-Link TPLINK_HWREVADD := 0 @@ -13,6 +18,7 @@ define Device/lantiqTpLink endef define Device/tplink_tdw8970 + $(Device/dsa-migration) $(Device/lantiqTpLink) DEVICE_MODEL := TD-W8970 DEVICE_VARIANT := v1 @@ -26,6 +32,7 @@ endef TARGET_DEVICES += tplink_tdw8970 define Device/tplink_tdw8980 + $(Device/dsa-migration) $(Device/lantiqTpLink) DEVICE_MODEL := TD-W8980 DEVICE_VARIANT := v1 @@ -39,6 +46,7 @@ endef TARGET_DEVICES += tplink_tdw8980 define Device/tplink_vr200 + $(Device/dsa-migration) $(Device/lantiqTpLink) DEVICE_MODEL := Archer VR200 DEVICE_VARIANT := v1 @@ -52,6 +60,7 @@ endef TARGET_DEVICES += tplink_vr200 define Device/tplink_vr200v + $(Device/dsa-migration) $(Device/lantiqTpLink) DEVICE_MODEL := Archer VR200v DEVICE_VARIANT := v1 diff --git a/target/linux/lantiq/image/vr9.mk b/target/linux/lantiq/image/vr9.mk index d8cabea972..5bc31314f8 100644 --- a/target/linux/lantiq/image/vr9.mk +++ b/target/linux/lantiq/image/vr9.mk @@ -1,6 +1,12 @@ DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID +define Device/dsa-migration + DEVICE_COMPAT_VERSION := 1.1 + DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA +endef + define Device/alphanetworks_asl56026 + $(Device/dsa-migration) DEVICE_VENDOR := Alpha DEVICE_MODEL := ASL56026 DEVICE_ALT0_VENDOR := BT Openreach @@ -10,6 +16,7 @@ endef TARGET_DEVICES += alphanetworks_asl56026 define Device/arcadyan_arv7519rw22 + $(Device/dsa-migration) DEVICE_VENDOR := Arcadyan DEVICE_MODEL := ARV7519RW22 DEVICE_ALT0_VENDOR := Orange @@ -26,6 +33,7 @@ endef TARGET_DEVICES += arcadyan_arv7519rw22 define Device/arcadyan_vg3503j + $(Device/dsa-migration) DEVICE_VENDOR := BT Openreach DEVICE_MODEL := ECI VDSL Modem V-2FUb/R IMAGE_SIZE := 8000k @@ -34,6 +42,7 @@ endef TARGET_DEVICES += arcadyan_vg3503j define Device/arcadyan_vgv7510kw22-brn + $(Device/dsa-migration) $(Device/lantiqBrnImage) DEVICE_VENDOR := Arcadyan DEVICE_MODEL := VGV7510KW22 @@ -51,6 +60,7 @@ endef TARGET_DEVICES += arcadyan_vgv7510kw22-brn define Device/arcadyan_vgv7510kw22-nor + $(Device/dsa-migration) DEVICE_VENDOR := Arcadyan DEVICE_MODEL := VGV7510KW22 DEVICE_VARIANT := NOR @@ -64,6 +74,7 @@ endef TARGET_DEVICES += arcadyan_vgv7510kw22-nor define Device/arcadyan_vgv7519-brn + $(Device/dsa-migration) $(Device/lantiqBrnImage) DEVICE_VENDOR := Arcadyan DEVICE_MODEL := VGV7519 @@ -81,6 +92,7 @@ endef TARGET_DEVICES += arcadyan_vgv7519-brn define Device/arcadyan_vgv7519-nor + $(Device/dsa-migration) DEVICE_VENDOR := Arcadyan DEVICE_MODEL := VGV7519 DEVICE_VARIANT := NOR @@ -94,6 +106,7 @@ endef TARGET_DEVICES += arcadyan_vgv7519-nor define Device/avm_fritz3370 + $(Device/dsa-migration) $(Device/AVM) $(Device/NAND) DEVICE_MODEL := FRITZ!Box 3370 @@ -107,6 +120,7 @@ define Device/avm_fritz3370 endef define Device/avm_fritz3370-rev2-hynix + $(Device/dsa-migration) $(Device/avm_fritz3370) DEVICE_MODEL := FRITZ!Box 3370 DEVICE_VARIANT := Rev. 2 (Hynix NAND) @@ -114,6 +128,7 @@ endef TARGET_DEVICES += avm_fritz3370-rev2-hynix define Device/avm_fritz3370-rev2-micron + $(Device/dsa-migration) $(Device/avm_fritz3370) DEVICE_MODEL := FRITZ!Box 3370 DEVICE_VARIANT := Rev. 2 (Micron NAND) @@ -121,6 +136,7 @@ endef TARGET_DEVICES += avm_fritz3370-rev2-micron define Device/avm_fritz3390 + $(Device/dsa-migration) $(Device/AVM) $(Device/NAND) DEVICE_MODEL := FRITZ!Box 3390 @@ -132,6 +148,7 @@ endef TARGET_DEVICES += avm_fritz3390 define Device/avm_fritz7360sl + $(Device/dsa-migration) $(Device/AVM) DEVICE_MODEL := FRITZ!Box 7360 SL IMAGE_SIZE := 15744k @@ -141,6 +158,7 @@ endef TARGET_DEVICES += avm_fritz7360sl define Device/avm_fritz7360-v2 + $(Device/dsa-migration) $(Device/AVM) DEVICE_MODEL := FRITZ!Box 7360 DEVICE_VARIANT := v2 @@ -150,6 +168,7 @@ endef TARGET_DEVICES += avm_fritz7360-v2 define Device/avm_fritz7362sl + $(Device/dsa-migration) $(Device/AVM) $(Device/NAND) DEVICE_MODEL := FRITZ!Box 7362 SL @@ -160,6 +179,7 @@ endef TARGET_DEVICES += avm_fritz7362sl define Device/avm_fritz7412 + $(Device/dsa-migration) $(Device/AVM) $(Device/NAND) DEVICE_MODEL := FRITZ!Box 7412 @@ -171,6 +191,7 @@ endef TARGET_DEVICES += avm_fritz7412 define Device/avm_fritz7430 + $(Device/dsa-migration) $(Device/AVM) $(Device/NAND) DEVICE_MODEL := FRITZ!Box 7430 @@ -181,6 +202,7 @@ endef TARGET_DEVICES += avm_fritz7430 define Device/bt_homehub-v5a + $(Device/dsa-migration) $(Device/NAND) DEVICE_VENDOR := British Telecom DEVICE_MODEL := Home Hub 5 @@ -193,6 +215,7 @@ endef TARGET_DEVICES += bt_homehub-v5a define Device/buffalo_wbmr-300hpd + $(Device/dsa-migration) DEVICE_VENDOR := Buffalo DEVICE_MODEL := WBMR-300HPD IMAGE_SIZE := 15616k @@ -202,6 +225,7 @@ endef TARGET_DEVICES += buffalo_wbmr-300hpd define Device/lantiq_easy80920-nand + $(Device/dsa-migration) $(Device/lantiqFullImage) DEVICE_VENDOR := Lantiq DEVICE_MODEL := VR9 EASY80920 @@ -212,6 +236,7 @@ endef TARGET_DEVICES += lantiq_easy80920-nand define Device/lantiq_easy80920-nor + $(Device/dsa-migration) DEVICE_VENDOR := Lantiq DEVICE_MODEL := VR9 EASY80920 DEVICE_VARIANT := NOR @@ -221,6 +246,7 @@ endef TARGET_DEVICES += lantiq_easy80920-nor define Device/netgear_dm200 + $(Device/dsa-migration) DEVICE_VENDOR := NETGEAR DEVICE_MODEL := DM200 IMAGES := sysupgrade.bin factory.img @@ -236,6 +262,7 @@ endef TARGET_DEVICES += netgear_dm200 define Device/zyxel_p-2812hnu-f1 + $(Device/dsa-migration) $(Device/NAND) DEVICE_VENDOR := ZyXEL DEVICE_MODEL := P-2812HNU @@ -248,6 +275,7 @@ endef TARGET_DEVICES += zyxel_p-2812hnu-f1 define Device/zyxel_p-2812hnu-f3 + $(Device/dsa-migration) $(Device/NAND) DEVICE_VENDOR := ZyXEL DEVICE_MODEL := P-2812HNU diff --git a/target/linux/lantiq/patches-5.10/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch b/target/linux/lantiq/patches-5.10/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch deleted file mode 100644 index 4265eeca57..0000000000 --- a/target/linux/lantiq/patches-5.10/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch +++ /dev/null @@ -1,71 +0,0 @@ -From d0ee51bbb7ce9880749a3d4794ec1fbbcda0f381 Mon Sep 17 00:00:00 2001 -From: Mathias Kresin <dev@kresin.me> -Date: Sun, 7 Jul 2019 21:45:51 +0200 -Subject: [PATCH] MIPS: lantiq revert DSA switch driver PMU/clock changes - -Switch back to the former used names, to make the legacy switch driver -happy. - -Signed-off-by: Mathias Kresin <dev@kresin.me> ---- - arch/mips/lantiq/xway/sysctrl.c | 18 +++++++++--------- - 1 file changed, 9 insertions(+), 9 deletions(-) - ---- a/arch/mips/lantiq/xway/sysctrl.c -+++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -469,9 +469,9 @@ void __init ltq_soc_init(void) - - if (of_machine_is_compatible("lantiq,grx390") || - of_machine_is_compatible("lantiq,ar10")) { -- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY0); -- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY1); -- clkdev_add_pmu("1e108000.switch", "gphy2", 0, 0, PMU_GPHY2); -+ clkdev_add_pmu("1f203020.gphy", NULL, 1, 0, PMU_GPHY0); -+ clkdev_add_pmu("1f203068.gphy", NULL, 1, 0, PMU_GPHY1); -+ clkdev_add_pmu("1f2030ac.gphy", NULL, 1, 0, PMU_GPHY2); - clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB0_P); - clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB1_P); - /* rc 0 */ -@@ -503,7 +503,7 @@ void __init ltq_soc_init(void) - } else if (of_machine_is_compatible("lantiq,grx390")) { - clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(), - ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz()); -- clkdev_add_pmu("1e108000.switch", "gphy3", 0, 0, PMU_GPHY3); -+ clkdev_add_pmu("1f203264.gphy", NULL, 1, 0, PMU_GPHY3); - clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); - clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1); - /* rc 2 */ -@@ -511,7 +511,7 @@ void __init ltq_soc_init(void) - clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI); - clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); - clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL); -- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); -+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); - clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); - clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); - } else if (of_machine_is_compatible("lantiq,ar10")) { -@@ -519,7 +519,7 @@ void __init ltq_soc_init(void) - ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz()); - clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); - clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1); -- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | -+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | - PMU_PPE_DP | PMU_PPE_TC); - clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); - clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); -@@ -540,12 +540,12 @@ void __init ltq_soc_init(void) - clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS); - - clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); -- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, -+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, - PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | - PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | - PMU_PPE_QSB | PMU_PPE_TOP); -- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY); -- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY); -+ clkdev_add_pmu("1f203020.gphy", NULL, 0, 0, PMU_GPHY); -+ clkdev_add_pmu("1f203068.gphy", NULL, 0, 0, PMU_GPHY); - clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); - clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); - clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); diff --git a/target/linux/lantiq/patches-5.10/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch b/target/linux/lantiq/patches-5.10/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch deleted file mode 100644 index d95e36caad..0000000000 --- a/target/linux/lantiq/patches-5.10/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch +++ /dev/null @@ -1,3473 +0,0 @@ -From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Mon, 22 Oct 2012 12:22:23 +0200 -Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver - ---- - drivers/net/ethernet/Kconfig | 8 +- - drivers/net/ethernet/Makefile | 1 + - drivers/net/ethernet/lantiq_pce.h | 163 +++ - drivers/net/ethernet/lantiq_xrx200_legacy.c | 1798 +++++++++++++++++++++++++++++++ - drivers/net/ethernet/lantiq_xrx200_legacy.h | 1328 +++++++++++++++++++++++ - 5 files changed, 3297 insertions(+), 1 deletion(-) - create mode 100644 drivers/net/ethernet/lantiq_pce.h - create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.c - create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.h - ---- a/drivers/net/ethernet/Kconfig -+++ b/drivers/net/ethernet/Kconfig -@@ -107,7 +107,13 @@ config LANTIQ_ETOP - tristate "Lantiq SoC ETOP driver" - depends on SOC_TYPE_XWAY - help -- Support for the MII0 inside the Lantiq SoC -+ Support for the MII0 inside the Lantiq ADSL SoC -+ -+config LANTIQ_XRX200_LEGACY -+ tristate "Lantiq SoC XRX200 driver" -+ depends on SOC_TYPE_XWAY -+ help -+ Support for the MII0 inside the Lantiq VDSL SoC - - config LANTIQ_XRX200 - tristate "Lantiq / Intel xRX200 PMAC network driver" ---- a/drivers/net/ethernet/Makefile -+++ b/drivers/net/ethernet/Makefile -@@ -50,6 +50,7 @@ obj-$(CONFIG_JME) += jme.o - obj-$(CONFIG_KORINA) += korina.o - obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o - obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o -+obj-$(CONFIG_LANTIQ_XRX200_LEGACY) += lantiq_xrx200_legacy.o - obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/ - obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/ - obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_pce.h -@@ -0,0 +1,163 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland GmbH -+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> -+ * -+ * PCE microcode extracted from UGW5.2 switch api -+ */ -+ -+/* Switch API Micro Code V0.3 */ -+enum { -+ OUT_MAC0 = 0, -+ OUT_MAC1, -+ OUT_MAC2, -+ OUT_MAC3, -+ OUT_MAC4, -+ OUT_MAC5, -+ OUT_ETHTYP, -+ OUT_VTAG0, -+ OUT_VTAG1, -+ OUT_ITAG0, -+ OUT_ITAG1, /*10 */ -+ OUT_ITAG2, -+ OUT_ITAG3, -+ OUT_IP0, -+ OUT_IP1, -+ OUT_IP2, -+ OUT_IP3, -+ OUT_SIP0, -+ OUT_SIP1, -+ OUT_SIP2, -+ OUT_SIP3, /*20*/ -+ OUT_SIP4, -+ OUT_SIP5, -+ OUT_SIP6, -+ OUT_SIP7, -+ OUT_DIP0, -+ OUT_DIP1, -+ OUT_DIP2, -+ OUT_DIP3, -+ OUT_DIP4, -+ OUT_DIP5, /*30*/ -+ OUT_DIP6, -+ OUT_DIP7, -+ OUT_SESID, -+ OUT_PROT, -+ OUT_APP0, -+ OUT_APP1, -+ OUT_IGMP0, -+ OUT_IGMP1, -+ OUT_IPOFF, /*39*/ -+ OUT_NONE = 63 -+}; -+ -+/* parser's microcode length type */ -+#define INSTR 0 -+#define IPV6 1 -+#define LENACCU 2 -+ -+/* parser's microcode flag type */ -+enum { -+ FLAG_ITAG = 0, -+ FLAG_VLAN, -+ FLAG_SNAP, -+ FLAG_PPPOE, -+ FLAG_IPV6, -+ FLAG_IPV6FL, -+ FLAG_IPV4, -+ FLAG_IGMP, -+ FLAG_TU, -+ FLAG_HOP, -+ FLAG_NN1, /*10 */ -+ FLAG_NN2, -+ FLAG_END, -+ FLAG_NO, /*13*/ -+}; -+ -+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */ -+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \ -+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }} -+struct pce_microcode { -+ unsigned short val[4]; -+/* unsigned short val_2; -+ unsigned short val_1; -+ unsigned short val_0;*/ -+} pce_microcode[] = { -+ /* value mask ns fields L type flags ipv4_len */ -+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0), -+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0), -+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1), -+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0), -+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0), -+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0), -+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0), -+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0), -+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0), -+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+}; ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_xrx200_legacy.c -@@ -0,0 +1,1930 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland -+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/switch.h> -+#include <linux/etherdevice.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/interrupt.h> -+#include <linux/clk.h> -+#include <linux/if_vlan.h> -+#include <asm/delay.h> -+ -+#include <linux/of_net.h> -+#include <linux/of_mdio.h> -+#include <linux/of_gpio.h> -+#include <linux/of_platform.h> -+ -+#include <xway_dma.h> -+#include <lantiq_soc.h> -+ -+#include "lantiq_pce.h" -+#include "lantiq_xrx200_legacy.h" -+ -+#define SW_POLLING -+#define SW_ROUTING -+ -+#ifdef SW_ROUTING -+#define XRX200_MAX_DEV 2 -+#else -+#define XRX200_MAX_DEV 1 -+#endif -+ -+#define XRX200_MAX_VLAN 64 -+#define XRX200_PCE_ACTVLAN_IDX 0x01 -+#define XRX200_PCE_VLANMAP_IDX 0x02 -+ -+#define XRX200_MAX_PORT 7 -+#define XRX200_MAX_DMA 8 -+ -+#define XRX200_HEADROOM 4 -+ -+#define XRX200_TX_TIMEOUT (10 * HZ) -+ -+/* port type */ -+#define XRX200_PORT_TYPE_PHY 1 -+#define XRX200_PORT_TYPE_MAC 2 -+ -+/* DMA */ -+#define XRX200_DMA_DATA_LEN 0x600 -+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0 -+#define XRX200_DMA_RX 0 -+#define XRX200_DMA_TX 1 -+#define XRX200_DMA_TX_2 3 -+#define XRX200_DMA_IS_TX(x) (x%2) -+#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x)) -+ -+/* fetch / store dma */ -+#define FDMA_PCTRL0 0x2A00 -+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18)) -+#define SDMA_PCTRL0 0x2F00 -+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18)) -+ -+/* buffer management */ -+#define BM_PCFG0 0x200 -+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8)) -+ -+/* MDIO */ -+#define MDIO_GLOB 0x0000 -+#define MDIO_CTRL 0x0020 -+#define MDIO_READ 0x0024 -+#define MDIO_WRITE 0x0028 -+#define MDIO_PHY0 0x0054 -+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned))) -+#define MDIO_CLK_CFG0 0x002C -+#define MDIO_CLK_CFG1 0x0030 -+ -+#define MDIO_GLOB_ENABLE 0x8000 -+#define MDIO_BUSY BIT(12) -+#define MDIO_RD BIT(11) -+#define MDIO_WR BIT(10) -+#define MDIO_MASK 0x1f -+#define MDIO_ADDRSHIFT 5 -+#define MDIO1_25MHZ 9 -+ -+#define MDIO_PHY_LINK_DOWN 0x4000 -+#define MDIO_PHY_LINK_UP 0x2000 -+ -+#define MDIO_PHY_SPEED_M10 0x0000 -+#define MDIO_PHY_SPEED_M100 0x0800 -+#define MDIO_PHY_SPEED_G1 0x1000 -+ -+#define MDIO_PHY_FDUP_EN 0x0200 -+#define MDIO_PHY_FDUP_DIS 0x0600 -+ -+#define MDIO_PHY_LINK_MASK 0x6000 -+#define MDIO_PHY_SPEED_MASK 0x1800 -+#define MDIO_PHY_FDUP_MASK 0x0600 -+#define MDIO_PHY_ADDR_MASK 0x001f -+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \ -+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK -+ -+/* MII */ -+#define MII_CFG(p) (p * 8) -+ -+#define MII_CFG_EN BIT(14) -+ -+#define MII_CFG_MODE_MIIP 0x0 -+#define MII_CFG_MODE_MIIM 0x1 -+#define MII_CFG_MODE_RMIIP 0x2 -+#define MII_CFG_MODE_RMIIM 0x3 -+#define MII_CFG_MODE_RGMII 0x4 -+#define MII_CFG_MODE_MASK 0xf -+ -+#define MII_CFG_RATE_M2P5 0x00 -+#define MII_CFG_RATE_M25 0x10 -+#define MII_CFG_RATE_M125 0x20 -+#define MII_CFG_RATE_M50 0x30 -+#define MII_CFG_RATE_AUTO 0x40 -+#define MII_CFG_RATE_MASK 0x70 -+ -+/* cpu port mac */ -+#define PMAC_HD_CTL 0x0000 -+#define PMAC_RX_IPG 0x0024 -+#define PMAC_EWAN 0x002c -+ -+#define PMAC_IPG_MASK 0xf -+#define PMAC_HD_CTL_AS 0x0008 -+#define PMAC_HD_CTL_AC 0x0004 -+#define PMAC_HD_CTL_RC 0x0010 -+#define PMAC_HD_CTL_RXSH 0x0040 -+#define PMAC_HD_CTL_AST 0x0080 -+#define PMAC_HD_CTL_RST 0x0100 -+ -+/* PCE */ -+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4)) -+#define PCE_TBL_MASK 0x1120 -+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4)) -+#define PCE_TBL_ADDR 0x1138 -+#define PCE_TBL_CTRL 0x113c -+#define PCE_PMAP1 0x114c -+#define PCE_PMAP2 0x1150 -+#define PCE_PMAP3 0x1154 -+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4)) -+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4)) -+ -+#define PCE_TBL_BUSY BIT(15) -+#define PCE_TBL_CFG_ADDR_MASK 0x1f -+#define PCE_TBL_CFG_ADWR 0x20 -+#define PCE_TBL_CFG_ADWR_MASK 0x60 -+#define PCE_INGRESS BIT(11) -+ -+/* MAC */ -+#define MAC_FLEN_REG (0x2314) -+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4)) -+ -+/* buffer management */ -+#define BM_PCFG(p) (0x200 + (p * 8)) -+ -+/* special tag in TX path header */ -+#define SPID_SHIFT 24 -+#define DPID_SHIFT 16 -+#define DPID_ENABLE 1 -+#define SPID_CPU_PORT 2 -+#define PORT_MAP_SEL BIT(15) -+#define PORT_MAP_EN BIT(14) -+#define PORT_MAP_SHIFT 1 -+#define PORT_MAP_MASK 0x3f -+ -+#define SPPID_MASK 0x7 -+#define SPPID_SHIFT 4 -+ -+/* MII regs not yet in linux */ -+#define MDIO_DEVAD_NONE (-1) -+#define ADVERTIZE_MPD (1 << 10) -+ -+struct xrx200_port { -+ u8 num; -+ u8 phy_addr; -+ u16 flags; -+ phy_interface_t phy_if; -+ -+ int link; -+ int gpio; -+ enum of_gpio_flags gpio_flags; -+ -+ struct phy_device *phydev; -+ struct device_node *phy_node; -+}; -+ -+struct xrx200_chan { -+ int idx; -+ int refcount; -+ int tx_free; -+ -+ struct net_device dummy_dev; -+ struct net_device *devs[XRX200_MAX_DEV]; -+ -+ struct tasklet_struct tasklet; -+ struct napi_struct napi; -+ struct ltq_dma_channel dma; -+ struct sk_buff *skb[LTQ_DESC_NUM]; -+ -+ spinlock_t lock; -+}; -+ -+struct xrx200_hw { -+ struct clk *clk; -+ struct mii_bus *mii_bus; -+ u8 phy_addr[XRX200_MAX_PORT]; -+ -+ struct xrx200_chan chan[XRX200_MAX_DMA]; -+ u16 vlan_vid[XRX200_MAX_VLAN]; -+ u16 vlan_port_map[XRX200_MAX_VLAN]; -+ -+ struct net_device *devs[XRX200_MAX_DEV]; -+ int num_devs; -+ -+ int port_map[XRX200_MAX_PORT]; -+ unsigned short wan_map; -+ -+ struct switch_dev swdev; -+}; -+ -+struct xrx200_priv { -+ struct net_device_stats stats; -+ int id; -+ -+ struct xrx200_port port[XRX200_MAX_PORT]; -+ int num_port; -+ bool wan; -+ bool sw; -+ unsigned short port_map; -+ unsigned char mac[6]; -+ -+ struct xrx200_hw *hw; -+}; -+ -+static __iomem void *xrx200_switch_membase; -+static __iomem void *xrx200_mii_membase; -+static __iomem void *xrx200_mdio_membase; -+static __iomem void *xrx200_pmac_membase; -+ -+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x)) -+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y)) -+#define ltq_switch_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_switch_membase + (z)) -+ -+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x)) -+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y)) -+#define ltq_mdio_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z)) -+ -+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x)) -+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y)) -+#define ltq_mii_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_mii_membase + (z)) -+ -+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x)) -+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y)) -+#define ltq_pmac_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z)) -+ -+#define XRX200_GLOBAL_REGATTR(reg) \ -+ .id = reg, \ -+ .type = SWITCH_TYPE_INT, \ -+ .set = xrx200_set_global_attr, \ -+ .get = xrx200_get_global_attr -+ -+#define XRX200_PORT_REGATTR(reg) \ -+ .id = reg, \ -+ .type = SWITCH_TYPE_INT, \ -+ .set = xrx200_set_port_attr, \ -+ .get = xrx200_get_port_attr -+ -+static int xrx200sw_read_x(int reg, int x) -+{ -+ int value, mask, addr; -+ -+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x); -+ value = ltq_switch_r32(addr); -+ mask = (1 << xrx200sw_reg[reg].size) - 1; -+ value = (value >> xrx200sw_reg[reg].shift); -+ -+ return (value & mask); -+} -+ -+static int xrx200sw_read(int reg) -+{ -+ return xrx200sw_read_x(reg, 0); -+} -+ -+static void xrx200sw_write_x(int value, int reg, int x) -+{ -+ int mask, addr; -+ -+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x); -+ mask = (1 << xrx200sw_reg[reg].size) - 1; -+ mask = (mask << xrx200sw_reg[reg].shift); -+ value = (value << xrx200sw_reg[reg].shift) & mask; -+ -+ ltq_switch_w32_mask(mask, value, addr); -+} -+ -+static void xrx200sw_write(int value, int reg) -+{ -+ xrx200sw_write_x(value, reg, 0); -+} -+ -+struct xrx200_pce_table_entry { -+ int index; // PCE_TBL_ADDR.ADDR = pData->table_index -+ int table; // PCE_TBL_CTRL.ADDR = pData->table -+ unsigned short key[8]; -+ unsigned short val[5]; -+ unsigned short mask; -+ unsigned short type; -+ unsigned short valid; -+ unsigned short gmap; -+}; -+ -+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl) -+{ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ // prepare the table access: -+ // PCE_TBL_ADDR.ADDR = pData->table_index -+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR); -+ // PCE_TBL_CTRL.ADDR = pData->table -+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR); -+ -+ //(address-based read) -+ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD -+ -+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access -+ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ // read the keys -+ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7); -+ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6); -+ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5); -+ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4); -+ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3); -+ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2); -+ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1); -+ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0); -+ -+ // read the values -+ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4); -+ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3); -+ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2); -+ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1); -+ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0); -+ -+ // read the mask -+ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0); -+ // read the type -+ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE); -+ // read the valid flag -+ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD); -+ // read the group map -+ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP); -+ -+ return 0; -+} -+ -+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl) -+{ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ // prepare the table access: -+ // PCE_TBL_ADDR.ADDR = pData->table_index -+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR); -+ // PCE_TBL_CTRL.ADDR = pData->table -+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR); -+ -+ //(address-based write) -+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD -+ -+ // read the keys -+ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7); -+ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6); -+ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5); -+ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4); -+ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3); -+ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2); -+ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1); -+ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0); -+ -+ // read the values -+ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4); -+ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3); -+ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2); -+ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1); -+ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0); -+ -+ // read the mask -+ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0); -+ // read the type -+ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE); -+ // read the valid flag -+ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD); -+ // read the group map -+ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP); -+ -+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access -+ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ return 0; -+} -+ -+static void xrx200sw_fixup_pvids(void) -+{ -+ int index, p, portmap, untagged; -+ struct xrx200_pce_table_entry tem; -+ struct xrx200_pce_table_entry tev; -+ -+ portmap = 0; -+ for (p = 0; p < XRX200_MAX_PORT; p++) -+ portmap |= BIT(p); -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ -+ for (index = XRX200_MAX_VLAN; index-- > 0;) -+ { -+ tev.index = index; -+ xrx200_pce_table_entry_read(&tev); -+ -+ if (tev.valid == 0) -+ continue; -+ -+ tem.index = index; -+ xrx200_pce_table_entry_read(&tem); -+ -+ if (tem.val[0] == 0) -+ continue; -+ -+ untagged = portmap & (tem.val[1] ^ tem.val[2]); -+ -+ for (p = 0; p < XRX200_MAX_PORT; p++) -+ if (untagged & BIT(p)) -+ { -+ portmap &= ~BIT(p); -+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p); -+ } -+ -+ for (p = 0; p < XRX200_MAX_PORT; p++) -+ if (portmap & BIT(p)) -+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p); -+ } -+} -+ -+// swconfig interface -+static void xrx200_hw_init(struct xrx200_hw *hw); -+ -+// global -+static int xrx200sw_reset_switch(struct switch_dev *dev) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ -+ xrx200_hw_init(hw); -+ -+ return 0; -+} -+ -+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ int p; -+ -+ if ((attr->max > 0) && (val->value.i > attr->max)) -+ return -EINVAL; -+ -+ for (p = 0; p < XRX200_MAX_PORT; p++) { -+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p); -+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p); -+ } -+ -+ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN); -+ return 0; -+} -+ -+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ val->value.i = xrx200sw_read(attr->id); -+ return 0; -+} -+ -+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ if ((attr->max > 0) && (val->value.i > attr->max)) -+ return -EINVAL; -+ -+ xrx200sw_write(val->value.i, attr->id); -+ return 0; -+} -+ -+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ val->value.i = xrx200sw_read(attr->id); -+ return 0; -+} -+ -+// vlan -+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ int i; -+ struct xrx200_pce_table_entry tev; -+ struct xrx200_pce_table_entry tem; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ -+ for (i = 0; i < XRX200_MAX_VLAN; i++) -+ { -+ tev.index = i; -+ xrx200_pce_table_entry_read(&tev); -+ if (tev.key[0] == val->value.i && i != val->port_vlan) -+ return -EINVAL; -+ } -+ -+ hw->vlan_vid[val->port_vlan] = val->value.i; -+ -+ tev.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tev); -+ tev.key[0] = val->value.i; -+ tev.valid = val->value.i > 0; -+ xrx200_pce_table_entry_write(&tev); -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ tem.val[0] = val->value.i; -+ xrx200_pce_table_entry_write(&tem); -+ -+ xrx200sw_fixup_pvids(); -+ return 0; -+} -+ -+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_pce_table_entry te; -+ -+ te.table = XRX200_PCE_ACTVLAN_IDX; -+ te.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&te); -+ val->value.i = te.key[0]; -+ -+ return 0; -+} -+ -+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ int i, portmap, tagmap, untagged; -+ struct xrx200_pce_table_entry tem; -+ -+ portmap = 0; -+ tagmap = 0; -+ for (i = 0; i < val->len; i++) -+ { -+ struct switch_port *p = &val->value.ports[i]; -+ -+ portmap |= (1 << p->id); -+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) -+ tagmap |= (1 << p->id); -+ } -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ -+ untagged = portmap ^ tagmap; -+ for (i = 0; i < XRX200_MAX_VLAN; i++) -+ { -+ tem.index = i; -+ xrx200_pce_table_entry_read(&tem); -+ -+ if (tem.val[0] == 0) -+ continue; -+ -+ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i)) -+ return -EINVAL; -+ } -+ -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ -+ // auto-enable this vlan if not enabled already -+ if (tem.val[0] == 0) -+ { -+ struct switch_val v; -+ v.port_vlan = val->port_vlan; -+ v.value.i = val->port_vlan; -+ if(xrx200sw_set_vlan_vid(dev, NULL, &v)) -+ return -EINVAL; -+ -+ //read updated tem -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ } -+ -+ tem.val[1] = portmap; -+ tem.val[2] = tagmap; -+ xrx200_pce_table_entry_write(&tem); -+ -+ ltq_switch_w32_mask(0, portmap, PCE_PMAP2); -+ ltq_switch_w32_mask(0, portmap, PCE_PMAP3); -+ hw->vlan_port_map[val->port_vlan] = portmap; -+ -+ xrx200sw_fixup_pvids(); -+ -+ return 0; -+} -+ -+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ int i; -+ unsigned short ports, tags; -+ struct xrx200_pce_table_entry tem; -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ -+ ports = tem.val[1]; -+ tags = tem.val[2]; -+ -+ for (i = 0; i < XRX200_MAX_PORT; i++) { -+ struct switch_port *p; -+ -+ if (!(ports & (1 << i))) -+ continue; -+ -+ p = &val->value.ports[val->len++]; -+ p->id = i; -+ if (tags & (1 << i)) -+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); -+ else -+ p->flags = 0; -+ } -+ -+ return 0; -+} -+ -+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_pce_table_entry tev; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ tev.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tev); -+ -+ if (tev.key[0] == 0) -+ return -EINVAL; -+ -+ tev.valid = val->value.i; -+ xrx200_pce_table_entry_write(&tev); -+ -+ xrx200sw_fixup_pvids(); -+ return 0; -+} -+ -+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_pce_table_entry tev; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ tev.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tev); -+ val->value.i = tev.valid; -+ -+ return 0; -+} -+ -+// port -+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val) -+{ -+ struct xrx200_pce_table_entry tev; -+ -+ if (port >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port); -+ xrx200_pce_table_entry_read(&tev); -+ -+ *val = tev.key[0]; -+ return 0; -+} -+ -+static int xrx200sw_get_port_link(struct switch_dev *dev, -+ int port, -+ struct switch_port_link *link) -+{ -+ if (port >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port); -+ if (!link->link) -+ return 0; -+ -+ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port); -+ -+ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010); -+ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020); -+ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port)); -+ -+ link->speed = SWITCH_PORT_SPEED_10; -+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port)) -+ link->speed = SWITCH_PORT_SPEED_100; -+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port)) -+ link->speed = SWITCH_PORT_SPEED_1000; -+ -+ return 0; -+} -+ -+static int xrx200sw_set_port_link(struct switch_dev *dev, int port, -+ struct switch_port_link *link) -+{ -+ if (port >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ return switch_generic_set_link(dev, port, link); -+} -+ -+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val); -+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg); -+ -+static int xrx200sw_phy_read16(struct switch_dev *dev, int addr, u8 reg, u16 *value) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ -+ *value = xrx200_mdio_rd(hw->mii_bus, hw->phy_addr[addr], reg); -+ -+ return 0; -+} -+ -+static int xrx200sw_phy_write16(struct switch_dev *dev, int addr, u8 reg, u16 value) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ -+ return xrx200_mdio_wr(hw->mii_bus, hw->phy_addr[addr], reg, value); -+} -+ -+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ if (val->port_vlan >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ if ((attr->max > 0) && (val->value.i > attr->max)) -+ return -EINVAL; -+ -+ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan); -+ return 0; -+} -+ -+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ if (val->port_vlan >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan); -+ return 0; -+} -+ -+// attributes -+static struct switch_attr xrx200sw_globals[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .set = xrx200_set_vlan_mode_enable, -+ .get = xrx200_get_vlan_mode_enable, -+ .name = "enable_vlan", -+ .description = "Enable VLAN mode", -+ .max = 1}, -+}; -+ -+static struct switch_attr xrx200sw_port[] = { -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR), -+ .name = "uvr", -+ .description = "Unknown VLAN Rule", -+ .max = 1, -+ }, -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR), -+ .name = "vsr", -+ .description = "VLAN Security Rule", -+ .max = 1, -+ }, -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR), -+ .name = "vinr", -+ .description = "VLAN Ingress Tag Rule", -+ .max = 2, -+ }, -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM), -+ .name = "tvm", -+ .description = "Transparent VLAN Mode", -+ .max = 1, -+ }, -+}; -+ -+static struct switch_attr xrx200sw_vlan[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "vid", -+ .description = "VLAN ID (0-4094)", -+ .set = xrx200sw_set_vlan_vid, -+ .get = xrx200sw_get_vlan_vid, -+ .max = 4094, -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable", -+ .description = "Enable VLAN", -+ .set = xrx200sw_set_vlan_enable, -+ .get = xrx200sw_get_vlan_enable, -+ .max = 1, -+ }, -+}; -+ -+static const struct switch_dev_ops xrx200sw_ops = { -+ .attr_global = { -+ .attr = xrx200sw_globals, -+ .n_attr = ARRAY_SIZE(xrx200sw_globals), -+ }, -+ .attr_port = { -+ .attr = xrx200sw_port, -+ .n_attr = ARRAY_SIZE(xrx200sw_port), -+ }, -+ .attr_vlan = { -+ .attr = xrx200sw_vlan, -+ .n_attr = ARRAY_SIZE(xrx200sw_vlan), -+ }, -+ .get_vlan_ports = xrx200sw_get_vlan_ports, -+ .set_vlan_ports = xrx200sw_set_vlan_ports, -+ .get_port_pvid = xrx200sw_get_port_pvid, -+ .reset_switch = xrx200sw_reset_switch, -+ .get_port_link = xrx200sw_get_port_link, -+ .set_port_link = xrx200sw_set_port_link, -+// .get_port_stats = xrx200sw_get_port_stats, //TODO -+ .phy_read16 = xrx200sw_phy_read16, -+ .phy_write16 = xrx200sw_phy_write16, -+}; -+ -+static int xrx200sw_init(struct xrx200_hw *hw) -+{ -+ int netdev_num; -+ -+ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++) -+ { -+ struct switch_dev *swdev; -+ struct net_device *dev = hw->devs[netdev_num]; -+ struct xrx200_priv *priv = netdev_priv(dev); -+ if (!priv->sw) -+ continue; -+ -+ swdev = &hw->swdev; -+ -+ swdev->name = "Lantiq XRX200 Switch"; -+ swdev->vlans = XRX200_MAX_VLAN; -+ swdev->ports = XRX200_MAX_PORT; -+ swdev->cpu_port = 6; -+ swdev->ops = &xrx200sw_ops; -+ -+ register_switch(swdev, dev); -+ return 0; // enough switches -+ } -+ return 0; -+} -+ -+static int xrx200_open(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ for (i = 0; i < XRX200_MAX_DMA; i++) { -+ if (!priv->hw->chan[i].dma.irq) -+ continue; -+ spin_lock_bh(&priv->hw->chan[i].lock); -+ if (!priv->hw->chan[i].refcount) { -+ if (XRX200_DMA_IS_RX(i)) -+ napi_enable(&priv->hw->chan[i].napi); -+ ltq_dma_open(&priv->hw->chan[i].dma); -+ ltq_dma_enable_irq(&priv->hw->chan[i].dma); -+ } -+ priv->hw->chan[i].refcount++; -+ spin_unlock_bh(&priv->hw->chan[i].lock); -+ } -+ for (i = 0; i < priv->num_port; i++) -+ if (priv->port[i].phydev) -+ phy_start(priv->port[i].phydev); -+ netif_wake_queue(dev); -+ -+ return 0; -+} -+ -+static int xrx200_close(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ netif_stop_queue(dev); -+ -+ for (i = 0; i < priv->num_port; i++) -+ if (priv->port[i].phydev) -+ phy_stop(priv->port[i].phydev); -+ -+ for (i = 0; i < XRX200_MAX_DMA; i++) { -+ if (!priv->hw->chan[i].dma.irq) -+ continue; -+ -+ priv->hw->chan[i].refcount--; -+ if (!priv->hw->chan[i].refcount) { -+ if (XRX200_DMA_IS_RX(i)) -+ napi_disable(&priv->hw->chan[i].napi); -+ spin_lock_bh(&priv->hw->chan[i].lock); -+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma); -+ spin_unlock_bh(&priv->hw->chan[i].lock); -+ } -+ } -+ -+ return 0; -+} -+ -+static int xrx200_alloc_skb(struct xrx200_chan *ch) -+{ -+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD) -+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD); -+ if (!ch->skb[ch->dma.desc]) -+ goto skip; -+ -+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD); -+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(ch->dma.dev, -+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN, -+ DMA_FROM_DEVICE); -+ ch->dma.desc_base[ch->dma.desc].addr = -+ CPHYSADDR(ch->skb[ch->dma.desc]->data); -+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN); -+ -+skip: -+ ch->dma.desc_base[ch->dma.desc].ctl = -+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | -+ XRX200_DMA_DATA_LEN; -+ -+ return 0; -+} -+ -+static void xrx200_hw_receive(struct xrx200_chan *ch, int id) -+{ -+ struct net_device *dev = ch->devs[id]; -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -+ struct sk_buff *skb = ch->skb[ch->dma.desc]; -+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK); -+ int ret; -+ -+ ret = xrx200_alloc_skb(ch); -+ -+ ch->dma.desc++; -+ ch->dma.desc %= LTQ_DESC_NUM; -+ -+ if (ret) { -+ netdev_err(dev, -+ "failed to allocate new rx buffer\n"); -+ return; -+ } -+ -+ skb_put(skb, len); -+#ifdef SW_ROUTING -+ skb_pull(skb, 8); -+#endif -+ skb->dev = dev; -+ skb->protocol = eth_type_trans(skb, dev); -+ netif_receive_skb(skb); -+ priv->stats.rx_packets++; -+ priv->stats.rx_bytes+=len; -+} -+ -+static int xrx200_poll_rx(struct napi_struct *napi, int budget) -+{ -+ struct xrx200_chan *ch = container_of(napi, -+ struct xrx200_chan, napi); -+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]); -+ int rx = 0; -+ int complete = 0; -+ -+ while ((rx < budget) && !complete) { -+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { -+#ifdef SW_ROUTING -+ struct sk_buff *skb = ch->skb[ch->dma.desc]; -+ u8 *special_tag = (u8*)skb->data; -+ int port = (special_tag[7] >> SPPID_SHIFT) & SPPID_MASK; -+ xrx200_hw_receive(ch, priv->hw->port_map[port]); -+#else -+ xrx200_hw_receive(ch, 0); -+#endif -+ rx++; -+ } else { -+ complete = 1; -+ } -+ } -+ -+ if (complete || !rx) { -+ napi_complete(&ch->napi); -+ ltq_dma_enable_irq(&ch->dma); -+ } -+ -+ return rx; -+} -+ -+static void xrx200_tx_housekeeping(unsigned long ptr) -+{ -+ struct xrx200_chan *ch = (struct xrx200_chan *) ptr; -+ int pkts = 0; -+ int i; -+ -+ spin_lock_bh(&ch->lock); -+ ltq_dma_ack_irq(&ch->dma); -+ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { -+ struct sk_buff *skb = ch->skb[ch->tx_free]; -+ -+ pkts++; -+ ch->skb[ch->tx_free] = NULL; -+ dev_kfree_skb(skb); -+ memset(&ch->dma.desc_base[ch->tx_free], 0, -+ sizeof(struct ltq_dma_desc)); -+ ch->tx_free++; -+ ch->tx_free %= LTQ_DESC_NUM; -+ } -+ ltq_dma_enable_irq(&ch->dma); -+ spin_unlock_bh(&ch->lock); -+ -+ if (!pkts) -+ return; -+ -+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) -+ netif_wake_queue(ch->devs[i]); -+} -+ -+static struct net_device_stats *xrx200_get_stats (struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ -+ return &priv->stats; -+} -+ -+static void xrx200_tx_timeout(struct net_device *dev, unsigned int txqueue) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ -+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name); -+ -+ priv->stats.tx_errors++; -+ netif_wake_queue(dev); -+} -+ -+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct xrx200_chan *ch; -+ struct ltq_dma_desc *desc; -+ u32 byte_offset; -+ int ret = NETDEV_TX_OK; -+ int len; -+#ifdef SW_ROUTING -+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE; -+#endif -+ if(priv->id) -+ ch = &priv->hw->chan[XRX200_DMA_TX_2]; -+ else -+ ch = &priv->hw->chan[XRX200_DMA_TX]; -+ -+ desc = &ch->dma.desc_base[ch->dma.desc]; -+ -+ skb->dev = dev; -+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; -+ -+#ifdef SW_ROUTING -+ if (is_multicast_ether_addr(eth_hdr(skb)->h_dest)) { -+ u16 port_map = priv->port_map; -+ -+ if (priv->sw && skb->protocol == htons(ETH_P_8021Q)) { -+ u16 vid; -+ int i; -+ -+ port_map = 0; -+ if (!__vlan_get_tag(skb, &vid)) { -+ for (i = 0; i < XRX200_MAX_VLAN; i++) { -+ if (priv->hw->vlan_vid[i] != vid) -+ continue; -+ port_map = priv->hw->vlan_port_map[i]; -+ break; -+ } -+ } -+ } -+ -+ special_tag |= (port_map << PORT_MAP_SHIFT) | -+ PORT_MAP_SEL | PORT_MAP_EN; -+ } -+ if(priv->wan) -+ special_tag |= (1 << DPID_SHIFT); -+ if(skb_headroom(skb) < 4) { -+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4); -+ dev_kfree_skb_any(skb); -+ skb = tmp; -+ } -+ skb_push(skb, 4); -+ memcpy(skb->data, &special_tag, sizeof(u32)); -+ len += 4; -+#endif -+ -+ /* dma needs to start on a 16 byte aligned address */ -+ byte_offset = CPHYSADDR(skb->data) % 16; -+ -+ spin_lock_bh(&ch->lock); -+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { -+ netdev_err(dev, "tx ring full\n"); -+ netif_stop_queue(dev); -+ ret = NETDEV_TX_BUSY; -+ goto out; -+ } -+ -+ ch->skb[ch->dma.desc] = skb; -+ -+ netif_trans_update(dev); -+ -+ desc->addr = ((unsigned int) dma_map_single(ch->dma.dev, skb->data, len, -+ DMA_TO_DEVICE)) - byte_offset; -+ wmb(); -+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | -+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); -+ ch->dma.desc++; -+ ch->dma.desc %= LTQ_DESC_NUM; -+ if (ch->dma.desc == ch->tx_free) -+ netif_stop_queue(dev); -+ -+ -+ priv->stats.tx_packets++; -+ priv->stats.tx_bytes+=len; -+ -+out: -+ spin_unlock_bh(&ch->lock); -+ -+ return ret; -+} -+ -+static irqreturn_t xrx200_dma_irq(int irq, void *priv) -+{ -+ struct xrx200_hw *hw = priv; -+ int chnr = irq - XRX200_DMA_IRQ; -+ struct xrx200_chan *ch = &hw->chan[chnr]; -+ -+ ltq_dma_disable_irq(&ch->dma); -+ ltq_dma_ack_irq(&ch->dma); -+ -+ if (chnr % 2) -+ tasklet_schedule(&ch->tasklet); -+ else -+ napi_schedule(&ch->napi); -+ -+ return IRQ_HANDLED; -+} -+ -+static int xrx200_dma_init(struct device *dev, struct xrx200_hw *hw) -+{ -+ int i, err = 0; -+ -+ ltq_dma_init_port(DMA_PORT_ETOP); -+ -+ for (i = 0; i < 8 && !err; i++) { -+ int irq = XRX200_DMA_IRQ + i; -+ struct xrx200_chan *ch = &hw->chan[i]; -+ -+ spin_lock_init(&ch->lock); -+ -+ ch->idx = ch->dma.nr = i; -+ ch->dma.dev = dev; -+ -+ if (i == XRX200_DMA_TX) { -+ ltq_dma_alloc_tx(&ch->dma); -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw); -+ } else if (i == XRX200_DMA_TX_2) { -+ ltq_dma_alloc_tx(&ch->dma); -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx_2", hw); -+ } else if (i == XRX200_DMA_RX) { -+ ltq_dma_alloc_rx(&ch->dma); -+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; -+ ch->dma.desc++) -+ if (xrx200_alloc_skb(ch)) -+ err = -ENOMEM; -+ ch->dma.desc = 0; -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw); -+ } else -+ continue; -+ -+ if (!err) -+ ch->dma.irq = irq; -+ else -+ pr_err("net-xrx200: failed to request irq %d\n", irq); -+ } -+ -+ return err; -+} -+ -+#ifdef SW_POLLING -+static void xrx200_gmac_update(struct xrx200_port *port) -+{ -+ u16 phyaddr = port->phydev->mdio.addr & MDIO_PHY_ADDR_MASK; -+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK; -+ u16 miirate = 0; -+ -+ switch (port->phydev->speed) { -+ case SPEED_1000: -+ phyaddr |= MDIO_PHY_SPEED_G1; -+ miirate = MII_CFG_RATE_M125; -+ break; -+ -+ case SPEED_100: -+ phyaddr |= MDIO_PHY_SPEED_M100; -+ switch (miimode) { -+ case MII_CFG_MODE_RMIIM: -+ case MII_CFG_MODE_RMIIP: -+ miirate = MII_CFG_RATE_M50; -+ break; -+ default: -+ miirate = MII_CFG_RATE_M25; -+ break; -+ } -+ break; -+ -+ default: -+ phyaddr |= MDIO_PHY_SPEED_M10; -+ miirate = MII_CFG_RATE_M2P5; -+ break; -+ } -+ -+ if (port->phydev->link) -+ phyaddr |= MDIO_PHY_LINK_UP; -+ else -+ phyaddr |= MDIO_PHY_LINK_DOWN; -+ -+ if (port->phydev->duplex == DUPLEX_FULL) -+ phyaddr |= MDIO_PHY_FDUP_EN; -+ else -+ phyaddr |= MDIO_PHY_FDUP_DIS; -+ -+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num)); -+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num)); -+ udelay(1); -+} -+#else -+static void xrx200_gmac_update(struct xrx200_port *port) -+{ -+ -+} -+#endif -+ -+static void xrx200_mdio_link(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ for (i = 0; i < priv->num_port; i++) { -+ if (!priv->port[i].phydev) -+ continue; -+ -+ if (priv->port[i].link != priv->port[i].phydev->link) { -+ xrx200_gmac_update(&priv->port[i]); -+ priv->port[i].link = priv->port[i].phydev->link; -+ netdev_info(dev, "port %d %s link\n", -+ priv->port[i].num, -+ (priv->port[i].link)?("got"):("lost")); -+ } -+ } -+} -+ -+static inline int xrx200_mdio_poll(struct mii_bus *bus) -+{ -+ unsigned cnt = 10000; -+ -+ while (likely(cnt--)) { -+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL); -+ if ((ctrl & MDIO_BUSY) == 0) -+ return 0; -+ } -+ -+ return 1; -+} -+ -+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) -+{ -+ if (xrx200_mdio_poll(bus)) -+ return 1; -+ -+ ltq_mdio_w32(val, MDIO_WRITE); -+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR | -+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | -+ (reg & MDIO_MASK), -+ MDIO_CTRL); -+ -+ return 0; -+} -+ -+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg) -+{ -+ if (xrx200_mdio_poll(bus)) -+ return -1; -+ -+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD | -+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | -+ (reg & MDIO_MASK), -+ MDIO_CTRL); -+ -+ if (xrx200_mdio_poll(bus)) -+ return -1; -+ -+ return ltq_mdio_r32(MDIO_READ); -+} -+ -+static int xrx200_phy_has_link(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ for (i = 0; i < priv->num_port; i++) { -+ if (!priv->port[i].phydev) -+ continue; -+ -+ if (priv->port[i].phydev->link) -+ return 1; -+ } -+ -+ return 0; -+} -+ -+static void xrx200_phy_link_change(struct phy_device *phydev, bool up) -+{ -+ struct net_device *netdev = phydev->attached_dev; -+ -+ if (up) -+ netif_carrier_on(netdev); -+ else if (!xrx200_phy_has_link(netdev)) -+ netif_carrier_off(netdev); -+ -+ phydev->adjust_link(netdev); -+} -+ -+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct phy_device *phydev = NULL; -+ unsigned val; -+ -+ phydev = mdiobus_get_phy(priv->hw->mii_bus, port->phy_addr); -+ -+ if (!phydev) { -+ netdev_err(dev, "no PHY found\n"); -+ return -ENODEV; -+ } -+ -+ phydev = phy_connect(dev, phydev_name(phydev), &xrx200_mdio_link, -+ port->phy_if); -+ -+ if (IS_ERR(phydev)) { -+ netdev_err(dev, "Could not attach to PHY\n"); -+ return PTR_ERR(phydev); -+ } -+ -+ linkmode_zero(phydev->supported); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, phydev->supported); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, phydev->supported); -+ linkmode_set_bit_array(phy_10_100_features_array, -+ ARRAY_SIZE(phy_10_100_features_array), -+ phydev->supported); -+ linkmode_set_bit_array(phy_gbit_features_array, -+ ARRAY_SIZE(phy_gbit_features_array), -+ phydev->supported); -+ linkmode_copy(phydev->advertising, phydev->supported); -+ -+ port->phydev = phydev; -+ phydev->phy_link_change = xrx200_phy_link_change; -+ -+ phy_attached_info(phydev); -+ -+#ifdef SW_POLLING -+ phy_read_status(phydev); -+ -+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000); -+ val |= ADVERTIZE_MPD; -+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val); -+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040); -+ -+ phy_start_aneg(phydev); -+#endif -+ return 0; -+} -+ -+static void xrx200_port_config(struct xrx200_priv *priv, -+ const struct xrx200_port *port) -+{ -+ u16 miimode = 0; -+ -+ switch (port->num) { -+ case 0: /* xMII0 */ -+ case 1: /* xMII1 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ if (port->flags & XRX200_PORT_TYPE_PHY) -+ /* MII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ else -+ /* MII PHY mode, connected to external MAC */ -+ miimode = MII_CFG_MODE_MIIP; -+ break; -+ case PHY_INTERFACE_MODE_RMII: -+ if (port->flags & XRX200_PORT_TYPE_PHY) -+ /* RMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RMIIM; -+ else -+ /* RMII PHY mode, connected to external MAC */ -+ miimode = MII_CFG_MODE_RMIIP; -+ break; -+ case PHY_INTERFACE_MODE_RGMII: -+ /* RGMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RGMII; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 2: /* internal GPHY0 */ -+ case 3: /* internal GPHY0 */ -+ case 4: /* internal GPHY1 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ case PHY_INTERFACE_MODE_GMII: -+ /* MII MAC mode, connected to internal GPHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 5: /* internal GPHY1 or xMII2 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ /* MII MAC mode, connected to internal GPHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ break; -+ case PHY_INTERFACE_MODE_RGMII: -+ /* RGMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RGMII; -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN, -+ MII_CFG(port->num)); -+} -+ -+static int xrx200_init(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct sockaddr mac; -+ int err, i; -+ -+#ifndef SW_POLLING -+ unsigned int reg = 0; -+ -+ /* enable auto polling */ -+ for (i = 0; i < priv->num_port; i++) -+ reg |= BIT(priv->port[i].num); -+ ltq_mdio_w32(reg, MDIO_CLK_CFG0); -+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1); -+#endif -+ -+ /* setup each port */ -+ for (i = 0; i < priv->num_port; i++) -+ xrx200_port_config(priv, &priv->port[i]); -+ -+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); -+ if (!is_valid_ether_addr(mac.sa_data)) { -+ pr_warn("net-xrx200: invalid MAC, using random\n"); -+ eth_random_addr(mac.sa_data); -+ dev->addr_assign_type |= NET_ADDR_RANDOM; -+ } -+ -+ err = eth_mac_addr(dev, &mac); -+ if (err) -+ goto err_netdev; -+ -+ for (i = 0; i < priv->num_port; i++) -+ if (xrx200_mdio_probe(dev, &priv->port[i])) -+ pr_warn("xrx200-mdio: probing phy of port %d failed\n", -+ priv->port[i].num); -+ -+ return 0; -+ -+err_netdev: -+ unregister_netdev(dev); -+ free_netdev(dev); -+ return err; -+} -+ -+static void xrx200_pci_microcode(void) -+{ -+ int i; -+ -+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK, -+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL); -+ ltq_switch_w32(0, PCE_TBL_MASK); -+ -+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) { -+ ltq_switch_w32(i, PCE_TBL_ADDR); -+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0)); -+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1)); -+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2)); -+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3)); -+ -+ // start the table access: -+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL); -+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY); -+ } -+ -+ /* tell the switch that the microcode is loaded */ -+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0)); -+} -+ -+static void xrx200_hw_init(struct xrx200_hw *hw) -+{ -+ int i; -+ -+ /* enable clock gate */ -+ clk_enable(hw->clk); -+ -+ ltq_switch_w32(1, 0); -+ mdelay(100); -+ ltq_switch_w32(0, 0); -+ /* -+ * TODO: we should really disbale all phys/miis here and explicitly -+ * enable them in the device secific init function -+ */ -+ -+ /* disable port fetch/store dma */ -+ for (i = 0; i < 7; i++ ) { -+ ltq_switch_w32(0, FDMA_PCTRLx(i)); -+ ltq_switch_w32(0, SDMA_PCTRLx(i)); -+ } -+ -+ /* enable Switch */ -+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB); -+ -+ /* load the pce microcode */ -+ xrx200_pci_microcode(); -+ -+ /* Default unknown Broadcat/Multicast/Unicast port maps */ -+ ltq_switch_w32(0x40, PCE_PMAP1); -+ ltq_switch_w32(0x40, PCE_PMAP2); -+ ltq_switch_w32(0x40, PCE_PMAP3); -+ -+ /* RMON Counter Enable for all physical ports */ -+ for (i = 0; i < 7; i++) -+ ltq_switch_w32(0x1, BM_PCFG(i)); -+ -+ /* disable auto polling */ -+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0); -+ -+ /* enable port statistic counters */ -+ for (i = 0; i < 7; i++) -+ ltq_switch_w32(0x1, BM_PCFGx(i)); -+ -+ /* set IPG to 12 */ -+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG); -+ -+#ifdef SW_ROUTING -+ /* enable status header, enable CRC */ -+ ltq_pmac_w32_mask(0, -+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC, -+ PMAC_HD_CTL); -+#else -+ /* disable status header, enable CRC */ -+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS, -+ PMAC_HD_CTL_AC | PMAC_HD_CTL_RC, -+ PMAC_HD_CTL); -+#endif -+ -+ /* enable port fetch/store dma & VLAN Modification */ -+ for (i = 0; i < 7; i++ ) { -+ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i)); -+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i)); -+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0)); -+ } -+ -+ /* enable special tag insertion on cpu port */ -+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6)); -+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0)); -+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2)); -+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG); -+ xrx200sw_write_x(1, XRX200_BM_QUEUE_GCTRL_GL_MOD, 0); -+ -+ for (i = 0; i < XRX200_MAX_VLAN; i++) -+ hw->vlan_vid[i] = i; -+} -+ -+static void xrx200_hw_cleanup(struct xrx200_hw *hw) -+{ -+ int i; -+ -+ /* disable the switch */ -+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB); -+ -+ /* free the channels and IRQs */ -+ for (i = 0; i < 2; i++) { -+ ltq_dma_free(&hw->chan[i].dma); -+ if (hw->chan[i].dma.irq) -+ free_irq(hw->chan[i].dma.irq, hw); -+ } -+ -+ /* free the allocated RX ring */ -+ for (i = 0; i < LTQ_DESC_NUM; i++) -+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]); -+ -+ /* clear the mdio bus */ -+ mdiobus_unregister(hw->mii_bus); -+ mdiobus_free(hw->mii_bus); -+ -+ /* release the clock */ -+ clk_disable(hw->clk); -+ clk_put(hw->clk); -+} -+ -+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np) -+{ -+ hw->mii_bus = mdiobus_alloc(); -+ if (!hw->mii_bus) -+ return -ENOMEM; -+ -+ hw->mii_bus->read = xrx200_mdio_rd; -+ hw->mii_bus->write = xrx200_mdio_wr; -+ hw->mii_bus->name = "lantiq,xrx200-mdio"; -+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0); -+ -+ if (of_mdiobus_register(hw->mii_bus, np)) { -+ mdiobus_free(hw->mii_bus); -+ return -ENXIO; -+ } -+ -+ return 0; -+} -+ -+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port) -+{ -+ const __be32 *addr, *id = of_get_property(port, "reg", NULL); -+ struct xrx200_port *p = &priv->port[priv->num_port]; -+ int ret; -+ -+ if (!id) -+ return; -+ -+ memset(p, 0, sizeof(struct xrx200_port)); -+ p->phy_node = of_parse_phandle(port, "phy-handle", 0); -+ addr = of_get_property(p->phy_node, "reg", NULL); -+ if (!addr) -+ return; -+ -+ p->num = *id; -+ p->phy_addr = *addr; -+ -+ ret = of_get_phy_mode(port, &p->phy_if); -+ if (ret) -+ pr_err("Can't find phy-mode for port\n"); -+ -+ if (p->phy_addr > 0x10) -+ p->flags = XRX200_PORT_TYPE_MAC; -+ else -+ p->flags = XRX200_PORT_TYPE_PHY; -+ priv->num_port++; -+ -+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags); -+ if (gpio_is_valid(p->gpio)) -+ if (!gpio_request(p->gpio, "phy-reset")) { -+ gpio_direction_output(p->gpio, -+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0)); -+ udelay(100); -+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); -+ } -+ /* is this port a wan port ? */ -+ if (priv->wan) -+ priv->hw->wan_map |= BIT(p->num); -+ -+ priv->port_map |= BIT(p->num); -+ -+ /* store the port id in the hw struct so we can map ports -> devices */ -+ priv->hw->port_map[p->num] = priv->hw->num_devs; -+ -+ /* store the phy addr in the hw struct so we can map ports -> phys */ -+ priv->hw->phy_addr[p->num] = p->phy_addr; -+} -+ -+static const struct net_device_ops xrx200_netdev_ops = { -+ .ndo_init = xrx200_init, -+ .ndo_open = xrx200_open, -+ .ndo_stop = xrx200_close, -+ .ndo_start_xmit = xrx200_start_xmit, -+ .ndo_set_mac_address = eth_mac_addr, -+ .ndo_validate_addr = eth_validate_addr, -+ .ndo_get_stats = xrx200_get_stats, -+ .ndo_tx_timeout = xrx200_tx_timeout, -+}; -+ -+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface, struct device *dev) -+{ -+ struct xrx200_priv *priv; -+ struct device_node *port; -+ const __be32 *wan; -+ const u8 *mac; -+ -+ /* alloc the network device */ -+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv)); -+ if (!hw->devs[hw->num_devs]) -+ return; -+ -+ /* setup the network device */ -+ strcpy(hw->devs[hw->num_devs]->name, "eth%d"); -+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops; -+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT; -+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM; -+ SET_NETDEV_DEV(hw->devs[hw->num_devs], dev); -+ -+ /* setup our private data */ -+ priv = netdev_priv(hw->devs[hw->num_devs]); -+ priv->hw = hw; -+ priv->id = hw->num_devs; -+ -+ mac = of_get_mac_address(iface); -+ if (!IS_ERR(mac)) -+ memcpy(priv->mac, mac, ETH_ALEN); -+ -+ /* is this the wan interface ? */ -+ wan = of_get_property(iface, "lantiq,wan", NULL); -+ if (wan && (*wan == 1)) -+ priv->wan = 1; -+ -+ /* should the switch be enabled on this interface ? */ -+ if (of_find_property(iface, "lantiq,switch", NULL)) -+ priv->sw = 1; -+ -+ /* load the ports that are part of the interface */ -+ for_each_child_of_node(iface, port) -+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port")) -+ xrx200_of_port(priv, port); -+ -+ /* register the actual device */ -+ if (!register_netdev(hw->devs[hw->num_devs])) -+ hw->num_devs++; -+} -+ -+static struct xrx200_hw xrx200_hw; -+ -+static int xrx200_probe(struct platform_device *pdev) -+{ -+ struct resource *res[4]; -+ struct device_node *mdio_np, *iface_np, *phy_np; -+ struct of_phandle_iterator it; -+ int err; -+ int i; -+ -+ /* load the memory ranges */ -+ for (i = 0; i < 4; i++) { -+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i); -+ if (!res[i]) { -+ dev_err(&pdev->dev, "failed to get resources\n"); -+ return -ENOENT; -+ } -+ } -+ xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]); -+ xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]); -+ xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]); -+ xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]); -+ if (!xrx200_switch_membase || !xrx200_mdio_membase || -+ !xrx200_mii_membase || !xrx200_pmac_membase) { -+ dev_err(&pdev->dev, "failed to request and remap io ranges \n"); -+ return -ENOMEM; -+ } -+ -+ of_for_each_phandle(&it, err, pdev->dev.of_node, "lantiq,phys", NULL, 0) { -+ phy_np = it.node; -+ if (phy_np) { -+ struct platform_device *phy = of_find_device_by_node(phy_np); -+ -+ of_node_put(phy_np); -+ if (!platform_get_drvdata(phy)) -+ return -EPROBE_DEFER; -+ } -+ } -+ -+ /* get the clock */ -+ xrx200_hw.clk = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(xrx200_hw.clk)) { -+ dev_err(&pdev->dev, "failed to get clock\n"); -+ return PTR_ERR(xrx200_hw.clk); -+ } -+ -+ /* bring up the dma engine and IP core */ -+ xrx200_dma_init(&pdev->dev, &xrx200_hw); -+ xrx200_hw_init(&xrx200_hw); -+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX]); -+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX_2].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX_2]); -+ -+ /* bring up the mdio bus */ -+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL, -+ "lantiq,xrx200-mdio"); -+ if (mdio_np) -+ if (xrx200_of_mdio(&xrx200_hw, mdio_np)) -+ dev_err(&pdev->dev, "mdio probe failed\n"); -+ -+ /* load the interfaces */ -+ for_each_child_of_node(pdev->dev.of_node, iface_np) -+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) { -+ if (xrx200_hw.num_devs < XRX200_MAX_DEV) -+ xrx200_of_iface(&xrx200_hw, iface_np, &pdev->dev); -+ else -+ dev_err(&pdev->dev, -+ "only %d interfaces allowed\n", -+ XRX200_MAX_DEV); -+ } -+ -+ if (!xrx200_hw.num_devs) { -+ xrx200_hw_cleanup(&xrx200_hw); -+ dev_err(&pdev->dev, "failed to load interfaces\n"); -+ return -ENOENT; -+ } -+ -+ xrx200sw_init(&xrx200_hw); -+ -+ /* set wan port mask */ -+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN); -+ -+ for (i = 0; i < xrx200_hw.num_devs; i++) { -+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i]; -+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i]; -+ xrx200_hw.chan[XRX200_DMA_TX_2].devs[i] = xrx200_hw.devs[i]; -+ } -+ -+ /* setup NAPI */ -+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev); -+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev, -+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32); -+ -+ platform_set_drvdata(pdev, &xrx200_hw); -+ -+ return 0; -+} -+ -+static int xrx200_remove(struct platform_device *pdev) -+{ -+ struct net_device *dev = platform_get_drvdata(pdev); -+ struct xrx200_priv *priv; -+ -+ if (!dev) -+ return 0; -+ -+ priv = netdev_priv(dev); -+ -+ /* free stack related instances */ -+ netif_stop_queue(dev); -+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi); -+ -+ /* shut down hardware */ -+ xrx200_hw_cleanup(&xrx200_hw); -+ -+ /* remove the actual device */ -+ unregister_netdev(dev); -+ free_netdev(dev); -+ -+ return 0; -+} -+ -+static const struct of_device_id xrx200_match[] = { -+ { .compatible = "lantiq,xrx200-net" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, xrx200_match); -+ -+static struct platform_driver xrx200_driver = { -+ .probe = xrx200_probe, -+ .remove = xrx200_remove, -+ .driver = { -+ .name = "lantiq,xrx200-net", -+ .of_match_table = xrx200_match, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+module_platform_driver(xrx200_driver); -+ -+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); -+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_xrx200_legacy.h -@@ -0,0 +1,1328 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland GmbH -+ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com> -+ * -+ * VR9 switch registers extracted from 310TUJ0 switch api -+ * WARNING mult values of 0x00 may not be correct -+ * -+ */ -+ -+enum { -+// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */ -+// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */ -+// XRX200_ETHSW_SWRES_R0, /* Register Configuration */ -+// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */ -+// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */ -+// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */ -+// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */ -+// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */ -+// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */ -+// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */ -+// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */ -+// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */ -+// XRX200_ETHSW_DBG_MODE, /* Debug Mode */ -+// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */ -+// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */ -+// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */ -+// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */ -+// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */ -+// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */ -+// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */ -+// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */ -+// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */ -+// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */ -+// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */ -+// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */ -+// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */ -+// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */ -+// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */ -+// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */ -+// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */ -+// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */ -+// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */ -+// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */ -+// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */ -+// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */ -+// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */ -+// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */ -+// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */ -+// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */ -+// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */ -+// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */ -+// XRX200_ETHSW_CAP_6_APPL, /* Application table size */ -+// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */ -+// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */ -+// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */ -+// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */ -+// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */ -+// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */ -+// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */ -+// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */ -+// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */ -+// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */ -+// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */ -+// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */ -+// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */ -+// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */ -+// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */ -+// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */ -+// XRX200_ETHSW_IER, /* Interrupt Enable Register */ -+// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */ -+// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */ -+// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */ -+// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */ -+// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */ -+// XRX200_ETHSW_ISR, /* Interrupt Status Register */ -+// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */ -+// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */ -+// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */ -+// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */ -+// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */ -+// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */ -+// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */ -+// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */ -+// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */ -+// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */ -+// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */ -+// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */ -+// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */ -+// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */ -+// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */ -+// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */ -+// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */ -+// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */ -+// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */ -+// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */ -+// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */ -+// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */ -+// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */ -+// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */ -+// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */ -+// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */ -+// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */ -+// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */ -+// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */ -+// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */ -+// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */ -+// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */ -+// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */ -+// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */ -+// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */ -+// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */ -+// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */ -+// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */ -+// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */ -+// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */ -+// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */ -+// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */ -+// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */ -+// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */ -+// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */ -+// XRX200_BM_RAM_ADDR, /* RAM Address Register */ -+// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */ -+// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */ -+// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */ -+// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */ -+// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */ -+// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */ -+// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */ -+// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */ -+// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */ -+// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */ -+// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */ -+// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */ -+// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */ -+// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */ -+// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */ -+// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */ -+// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */ -+// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */ -+// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */ -+// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */ -+// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */ -+// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */ -+// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */ -+// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */ -+// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */ -+// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */ -+// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */ -+ XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */ -+// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */ -+// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */ -+// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */ -+// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */ -+// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */ -+// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */ -+// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */ -+// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */ -+// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */ -+// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */ -+// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */ -+// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */ -+// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */ -+// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */ -+// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */ -+// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */ -+// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */ -+// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */ -+// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */ -+// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */ -+// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */ -+// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */ -+// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */ -+// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */ -+// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */ -+// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */ -+// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */ -+// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */ -+// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */ -+// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */ -+// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */ -+// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */ -+// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */ -+// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */ -+// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */ -+// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */ -+// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */ -+// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */ -+// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */ -+// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */ -+// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */ -+// XRX200_BM_CISEL_PORT, /* Port Number */ -+// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */ -+// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */ -+// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */ -+// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */ -+// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */ -+// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */ -+// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */ -+// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */ -+// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */ -+// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */ -+// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */ -+// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */ -+// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */ -+// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */ -+// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */ -+// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */ -+// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */ -+// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */ -+// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */ -+// XRX200_RS_CBS_CBS, /* Committed Burst Size */ -+// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */ -+// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */ -+// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */ -+// XRX200_RS_CIR_EXP_EXP, /* Exponent */ -+// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */ -+// XRX200_RS_CIR_MANT_MANT, /* Mantissa */ -+ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */ -+// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */ -+// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */ -+// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */ -+// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */ -+// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */ -+// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */ -+// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */ -+ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */ -+// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */ -+// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */ -+ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */ -+// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */ -+// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */ -+// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */ -+// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */ -+// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */ -+// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */ -+ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */ -+// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */ -+ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */ -+ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */ -+ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */ -+ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */ -+ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */ -+ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */ -+// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */ -+// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */ -+// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */ -+// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */ -+// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */ -+// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */ -+// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */ -+// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */ -+// XRX200_PCE_PMAP_1, /* Port Map Register 1 */ -+// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */ -+// XRX200_PCE_PMAP_2, /* Port Map Register 2 */ -+// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */ -+// XRX200_PCE_PMAP_3, /* Port Map Register 3 */ -+// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */ -+// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */ -+// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */ -+ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */ -+// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */ -+// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */ -+// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */ -+// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */ -+// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */ -+// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */ -+// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */ -+// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */ -+// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */ -+// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */ -+// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */ -+// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */ -+// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */ -+// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */ -+// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */ -+// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */ -+// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */ -+// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */ -+// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */ -+// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */ -+// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */ -+// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */ -+// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */ -+// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */ -+// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */ -+// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */ -+// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */ -+// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */ -+// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */ -+// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */ -+// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */ -+// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */ -+// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */ -+// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */ -+// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */ -+// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */ -+// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */ -+// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */ -+// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */ -+// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */ -+// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */ -+// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */ -+// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */ -+// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */ -+// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */ -+// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */ -+// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */ -+// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */ -+// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */ -+// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */ -+// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */ -+// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */ -+// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */ -+// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */ -+// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */ -+// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */ -+// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */ -+// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */ -+// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */ -+// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */ -+// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */ -+// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */ -+// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */ -+// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */ -+// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */ -+// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */ -+// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */ -+// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */ -+// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */ -+// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */ -+// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */ -+// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */ -+// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */ -+// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */ -+// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */ -+// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */ -+// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */ -+// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */ -+// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */ -+// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */ -+// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */ -+ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */ -+// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */ -+// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */ -+// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */ -+// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */ -+// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */ -+// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */ -+// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */ -+// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */ -+// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */ -+// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */ -+// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */ -+// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */ -+// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */ -+// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */ -+// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */ -+// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */ -+// XRX200_WOL_CTRL_PORT, /* WoL Enable */ -+// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */ -+ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */ -+ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */ -+ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */ -+ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */ -+ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */ -+// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */ -+ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */ -+// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */ -+// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */ -+// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */ -+// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */ -+// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */ -+// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */ -+// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */ -+// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */ -+// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */ -+// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */ -+// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */ -+// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */ -+// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */ -+// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */ -+// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */ -+// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */ -+// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */ -+// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */ -+// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */ -+// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */ -+// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */ -+// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */ -+// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */ -+// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */ -+// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */ -+// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */ -+// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */ -+// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */ -+// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */ -+// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */ -+// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */ -+// XRX200_MAC_TEST, /* MAC Test Register */ -+// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */ -+// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */ -+// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */ -+// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */ -+// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */ -+// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */ -+// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */ -+// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */ -+// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */ -+// XRX200_MAC_FLEN, /* MAC Frame Length Register */ -+// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */ -+// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */ -+// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */ -+// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */ -+// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */ -+// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */ -+// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */ -+// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */ -+// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */ -+// XRX200_MAC_PSTAT, /* MAC Port Status Register */ -+// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */ -+ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */ -+ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */ -+ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */ -+// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */ -+// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */ -+// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */ -+// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */ -+ XRX200_MAC_PSTAT_LSTAT, /* Link Status */ -+// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */ -+// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */ -+// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */ -+// XRX200_MAC_PISR, /* MAC Interrupt Status Register */ -+// XRX200_MAC_PISR_PACT, /* PHY Active Status */ -+// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */ -+// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */ -+// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */ -+// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */ -+// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */ -+// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */ -+// XRX200_MAC_PISR_JAM, /* Jam Status Detected */ -+// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */ -+// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */ -+// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */ -+// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */ -+// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */ -+// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */ -+// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */ -+// XRX200_MAC_PIER_PACT, /* PHY Active Status */ -+// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */ -+// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */ -+// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */ -+// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */ -+// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */ -+// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */ -+// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */ -+// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */ -+// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */ -+// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */ -+// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */ -+// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */ -+// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */ -+// XRX200_MAC_CTRL_0, /* MAC Control Register0 */ -+// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */ -+// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */ -+// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */ -+// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */ -+// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */ -+// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */ -+// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */ -+ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */ -+// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */ -+// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */ -+// XRX200_MAC_CTRL_1, /* MAC Control Register1 */ -+// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */ -+// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */ -+// XRX200_MAC_CTRL_2, /* MAC Control Register2 */ -+// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */ -+// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */ -+// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */ -+// XRX200_MAC_CTRL_3, /* MAC Control Register3 */ -+// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */ -+// XRX200_MAC_CTRL_4, /* MAC Control Register4 */ -+// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */ -+// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */ -+// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */ -+// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */ -+// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */ -+// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */ -+// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */ -+// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */ -+// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */ -+// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */ -+// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */ -+// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */ -+// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */ -+// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */ -+// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */ -+// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */ -+// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */ -+// XRX200_MAC_TESTEN, /* MAC Test Enable Register */ -+// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */ -+// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */ -+// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */ -+// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */ -+// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */ -+// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */ -+// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */ -+// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */ -+// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */ -+// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */ -+// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */ -+// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */ -+// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */ -+// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */ -+// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */ -+// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */ -+// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */ -+// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */ -+// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */ -+// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */ -+// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */ -+// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */ -+// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */ -+// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */ -+// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */ -+// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */ -+// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */ -+// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */ -+// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */ -+// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */ -+// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */ -+// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */ -+// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */ -+// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */ -+// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */ -+// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */ -+// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */ -+// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */ -+// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */ -+// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */ -+// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */ -+// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */ -+// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */ -+// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */ -+// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */ -+// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */ -+// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */ -+// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */ -+// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */ -+// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */ -+// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */ -+// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */ -+// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */ -+// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */ -+// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */ -+// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */ -+// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */ -+// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */ -+// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */ -+// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */ -+// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */ -+// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */ -+// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */ -+// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */ -+// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */ -+// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */ -+// XRX200_SDMA_IER_BFULL, /* Buffer Full */ -+// XRX200_SDMA_IER_FERR, /* Frame Error */ -+// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */ -+// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */ -+// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */ -+// XRX200_SDMA_ISR_BFULL, /* Buffer Full */ -+// XRX200_SDMA_ISR_FERR, /* Frame Error */ -+// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */ -+// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */ -+// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */ -+// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */ -+// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */ -+// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */ -+// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */ -+// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */ -+// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */ -+// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */ -+// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */ -+// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */ -+// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */ -+// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */ -+// XRX200_SDMA_PCTRL_PEN, /* Port Enable */ -+// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */ -+// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */ -+// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */ -+// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */ -+// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */ -+// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */ -+// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */ -+// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */ -+// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */ -+// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */ -+}; -+ -+ -+struct xrx200sw_reg { -+ int offset; -+ int shift; -+ int size; -+ int mult; -+} xrx200sw_reg[] = { -+// offeset shift size mult -+// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */ -+// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */ -+// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */ -+// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */ -+// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */ -+// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */ -+// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */ -+// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */ -+// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */ -+// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */ -+// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */ -+// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */ -+// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */ -+// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */ -+// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */ -+// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */ -+// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */ -+// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */ -+// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */ -+// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */ -+// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */ -+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */ -+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */ -+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */ -+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */ -+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */ -+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */ -+// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */ -+// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */ -+// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */ -+// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */ -+// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */ -+// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */ -+// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */ -+// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */ -+// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */ -+// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */ -+// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */ -+// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */ -+// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */ -+// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */ -+// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */ -+// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */ -+// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */ -+// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */ -+// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */ -+// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */ -+// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */ -+// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */ -+// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */ -+// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */ -+// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */ -+// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */ -+// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */ -+// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */ -+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */ -+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */ -+// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */ -+// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */ -+// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */ -+// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */ -+// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */ -+// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */ -+// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */ -+// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */ -+// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */ -+// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */ -+// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */ -+// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */ -+// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */ -+// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */ -+// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */ -+// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */ -+// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */ -+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */ -+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */ -+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */ -+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */ -+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */ -+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */ -+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */ -+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */ -+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */ -+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */ -+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */ -+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */ -+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */ -+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */ -+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */ -+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */ -+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */ -+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */ -+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */ -+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */ -+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */ -+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */ -+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */ -+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */ -+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */ -+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */ -+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */ -+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */ -+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */ -+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */ -+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */ -+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */ -+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */ -+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */ -+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */ -+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */ -+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */ -+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */ -+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */ -+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */ -+// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */ -+// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */ -+// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */ -+// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */ -+// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */ -+// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */ -+// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */ -+// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */ -+// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */ -+// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */ -+// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */ -+// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */ -+// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */ -+// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */ -+// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */ -+// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */ -+// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */ -+// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */ -+// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */ -+// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */ -+// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */ -+// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */ -+// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */ -+// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */ -+// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */ -+// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */ -+// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */ -+// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */ -+ {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */ -+// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */ -+// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */ -+// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */ -+// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */ -+// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */ -+// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */ -+// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */ -+// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */ -+// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */ -+// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */ -+// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */ -+// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */ -+// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */ -+// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */ -+// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */ -+// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */ -+// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */ -+// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */ -+// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */ -+// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */ -+// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */ -+// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */ -+// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */ -+// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */ -+// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */ -+// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */ -+// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */ -+// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */ -+// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */ -+// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */ -+// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */ -+// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */ -+// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */ -+// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */ -+// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */ -+// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */ -+// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */ -+// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */ -+// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */ -+// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */ -+// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */ -+// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */ -+// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */ -+// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */ -+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */ -+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */ -+// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */ -+// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */ -+// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */ -+// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */ -+// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */ -+// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */ -+// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */ -+// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */ -+// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */ -+// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */ -+// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */ -+// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */ -+// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */ -+// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */ -+// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */ -+// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */ -+// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */ -+// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */ -+// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */ -+// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */ -+// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */ -+// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */ -+ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */ -+// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */ -+ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */ -+// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */ -+ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */ -+// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */ -+ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */ -+// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */ -+ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */ -+// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */ -+ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */ -+// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */ -+ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */ -+// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */ -+ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */ -+// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */ -+ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */ -+// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */ -+ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */ -+// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */ -+ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */ -+// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */ -+ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */ -+// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */ -+ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */ -+// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */ -+ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */ -+// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */ -+// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */ -+ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */ -+// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */ -+ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */ -+ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */ -+ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */ -+ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */ -+ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */ -+ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */ -+// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */ -+// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */ -+// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */ -+// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */ -+// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */ -+// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */ -+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */ -+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */ -+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */ -+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */ -+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */ -+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */ -+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */ -+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */ -+// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */ -+// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */ -+ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */ -+// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */ -+// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */ -+// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */ -+// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */ -+// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */ -+// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */ -+// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */ -+// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */ -+// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */ -+// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */ -+// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */ -+// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */ -+// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */ -+// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */ -+// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */ -+// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */ -+// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */ -+// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */ -+// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */ -+// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */ -+// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */ -+// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */ -+// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */ -+// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */ -+// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */ -+// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */ -+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */ -+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */ -+// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */ -+// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */ -+// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */ -+// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */ -+// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */ -+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */ -+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */ -+// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */ -+// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */ -+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */ -+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */ -+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */ -+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */ -+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */ -+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */ -+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */ -+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */ -+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */ -+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */ -+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */ -+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */ -+// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */ -+// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */ -+// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */ -+// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */ -+// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */ -+// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */ -+// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */ -+// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */ -+// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */ -+// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */ -+// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */ -+// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */ -+// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */ -+// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */ -+// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */ -+// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */ -+// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */ -+// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */ -+// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */ -+// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */ -+// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */ -+// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */ -+// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */ -+// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */ -+// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */ -+// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */ -+// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */ -+// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */ -+// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */ -+// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */ -+// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */ -+// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */ -+// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */ -+// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */ -+// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */ -+// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */ -+// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */ -+// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */ -+// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */ -+// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */ -+// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */ -+// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */ -+// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */ -+// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */ -+// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */ -+// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */ -+// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */ -+// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */ -+// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */ -+// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */ -+// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */ -+// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */ -+// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */ -+// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */ -+// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */ -+// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */ -+// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */ -+// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */ -+// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */ -+// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */ -+// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */ -+// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */ -+// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */ -+// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */ -+// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */ -+// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */ -+// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */ -+ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */ -+// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */ -+// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */ -+// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */ -+// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */ -+// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */ -+// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */ -+// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */ -+// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */ -+// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */ -+// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */ -+// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */ -+// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */ -+// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */ -+// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */ -+// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */ -+// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */ -+// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */ -+// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */ -+// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */ -+// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */ -+// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */ -+// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */ -+// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */ -+// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */ -+// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */ -+// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */ -+ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */ -+ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */ -+ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */ -+ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */ -+ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */ -+// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */ -+ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */ -+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */ -+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */ -+// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */ -+// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */ -+// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */ -+// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */ -+// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */ -+// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */ -+// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */ -+// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */ -+// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */ -+// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */ -+// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */ -+// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */ -+// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */ -+// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */ -+// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */ -+// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */ -+// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */ -+// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */ -+// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */ -+// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */ -+// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */ -+// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */ -+// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */ -+// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */ -+// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */ -+// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */ -+// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */ -+// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */ -+// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */ -+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */ -+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */ -+// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */ -+// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */ -+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */ -+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */ -+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */ -+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */ -+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */ -+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */ -+// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */ -+// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */ -+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */ -+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */ -+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */ -+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */ -+// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */ -+// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */ -+// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */ -+// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */ -+// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */ -+// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */ -+ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */ -+ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */ -+ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */ -+// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */ -+// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */ -+// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */ -+// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */ -+ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */ -+// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */ -+// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */ -+// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */ -+// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */ -+// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */ -+// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */ -+// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */ -+// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */ -+// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */ -+// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */ -+// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */ -+// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */ -+// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */ -+// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */ -+// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */ -+// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */ -+// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */ -+// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */ -+// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */ -+// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */ -+// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */ -+// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */ -+// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */ -+// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */ -+// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */ -+// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */ -+// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */ -+// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */ -+// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */ -+// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */ -+// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */ -+// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */ -+// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */ -+// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */ -+// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */ -+// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */ -+// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */ -+// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */ -+// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */ -+// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */ -+// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */ -+ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */ -+// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */ -+// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */ -+// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */ -+// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */ -+// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */ -+// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */ -+// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */ -+// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */ -+// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */ -+// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */ -+// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */ -+// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */ -+// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */ -+// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */ -+// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */ -+// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */ -+// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */ -+// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */ -+// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */ -+// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */ -+// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */ -+// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */ -+// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */ -+// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */ -+// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */ -+// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */ -+// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */ -+// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */ -+// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */ -+// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */ -+// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */ -+// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */ -+// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */ -+// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */ -+// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */ -+// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */ -+// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */ -+// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */ -+// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */ -+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */ -+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */ -+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */ -+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */ -+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */ -+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */ -+// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */ -+// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */ -+// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */ -+// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */ -+// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */ -+// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */ -+// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */ -+// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */ -+// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */ -+// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */ -+// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */ -+// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */ -+// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */ -+// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */ -+// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */ -+// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */ -+// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */ -+// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */ -+// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */ -+// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */ -+// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */ -+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */ -+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */ -+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */ -+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */ -+// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */ -+// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */ -+// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */ -+// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */ -+// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */ -+// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */ -+// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */ -+// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */ -+// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */ -+// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */ -+// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */ -+// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */ -+// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */ -+// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */ -+// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */ -+// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */ -+// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */ -+// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */ -+// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */ -+// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */ -+// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */ -+// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */ -+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */ -+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */ -+// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */ -+// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */ -+// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */ -+// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */ -+// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */ -+// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */ -+// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */ -+// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */ -+// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */ -+// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */ -+// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */ -+// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */ -+// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */ -+// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */ -+// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */ -+// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */ -+// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */ -+// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */ -+// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */ -+// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */ -+// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */ -+// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */ -+// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */ -+// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */ -+// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */ -+// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */ -+// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */ -+// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */ -+// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */ -+// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */ -+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */ -+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */ -+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */ -+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */ -+}; -+ -+ diff --git a/target/linux/lantiq/patches-5.10/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch b/target/linux/lantiq/patches-5.10/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch deleted file mode 100644 index 8fd29161fe..0000000000 --- a/target/linux/lantiq/patches-5.10/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch +++ /dev/null @@ -1,352 +0,0 @@ -From c8eedcadc38a5e6008d3990fbe0a5285b30335fc Mon Sep 17 00:00:00 2001 -From: Mathias Kresin <dev@kresin.me> -Date: Sun, 7 Jul 2019 21:48:56 +0200 -Subject: [PATCH] MIPS: lantiq: Add GPHY Firmware loader - -Upstream, the GPHY Firmware loader has been merged into the DSA switch -driver. But we don't use the driver yet, so bring it back. - -Signed-off-by: Mathias Kresin <dev@kresin.me> ---- - .../bindings/mips/lantiq/rcu-gphy.txt | 36 +++ - .../devicetree/bindings/mips/lantiq/rcu.txt | 18 ++ - arch/mips/configs/xway_defconfig | 1 + - arch/mips/lantiq/Kconfig | 4 + - drivers/soc/lantiq/Makefile | 1 + - drivers/soc/lantiq/gphy.c | 224 ++++++++++++++++++ - 6 files changed, 284 insertions(+) - create mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt - create mode 100644 drivers/soc/lantiq/gphy.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt -@@ -0,0 +1,37 @@ -+Lantiq XWAY SoC GPHY binding -+============================ -+ -+This binding describes a software-defined ethernet PHY, provided by the RCU -+module on newer Lantiq XWAY SoCs (xRX200 and newer). -+ -+------------------------------------------------------------------------------- -+Required properties: -+- compatible : Should be one of -+ "lantiq,xrx200-gphy" -+ "lantiq,xrx200a1x-gphy" -+ "lantiq,xrx200a2x-gphy" -+ "lantiq,xrx300-gphy" -+ "lantiq,xrx330-gphy" -+- reg : Addrress of the GPHY FW load address register -+- resets : Must reference the RCU GPHY reset bit -+- reset-names : One entry, value must be "gphy" or optional "gphy2" -+- clocks : A reference to the (PMU) GPHY clock gate -+ -+Optional properties: -+- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in -+ <dt-bindings/mips/lantiq_xway_gphy.h> -+ -+ -+------------------------------------------------------------------------------- -+Example for the GPHys on the xRX200 SoCs: -+ -+#include <dt-bindings/mips/lantiq_rcu_gphy.h> -+ gphy0: gphy@20 { -+ compatible = "lantiq,xrx200a2x-gphy"; -+ reg = <0x20 0x4>; -+ -+ resets = <&reset0 31 30>, <&reset1 7 7>; -+ reset-names = "gphy", "gphy2"; -+ clocks = <&pmu0 XRX200_PMU_GATE_GPHY>; -+ lantiq,gphy-mode = <GPHY_MODE_GE>; -+ }; ---- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt -+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt -@@ -26,6 +26,24 @@ Example of the RCU bindings on a xRX200 - ranges = <0x0 0x203000 0x100>; - big-endian; - -+ gphy0: gphy@20 { -+ compatible = "lantiq,xrx200a2x-gphy"; -+ reg = <0x20 0x4>; -+ -+ resets = <&reset0 31 30>, <&reset1 7 7>; -+ reset-names = "gphy", "gphy2"; -+ lantiq,gphy-mode = <GPHY_MODE_GE>; -+ }; -+ -+ gphy1: gphy@68 { -+ compatible = "lantiq,xrx200a2x-gphy"; -+ reg = <0x68 0x4>; -+ -+ resets = <&reset0 29 28>, <&reset1 6 6>; -+ reset-names = "gphy", "gphy2"; -+ lantiq,gphy-mode = <GPHY_MODE_GE>; -+ }; -+ - reset0: reset-controller@10 { - compatible = "lantiq,xrx200-reset"; - reg = <0x10 4>, <0x14 4>; ---- a/arch/mips/configs/xway_defconfig -+++ b/arch/mips/configs/xway_defconfig -@@ -13,6 +13,7 @@ CONFIG_EMBEDDED=y - # CONFIG_COMPAT_BRK is not set - CONFIG_LANTIQ=y - CONFIG_PCI_LANTIQ=y -+CONFIG_XRX200_PHY_FW=y - CONFIG_CPU_MIPS32_R2=y - CONFIG_MIPS_VPE_LOADER=y - CONFIG_NR_CPUS=2 ---- a/arch/mips/lantiq/Kconfig -+++ b/arch/mips/lantiq/Kconfig -@@ -62,4 +62,8 @@ config PCIE_LANTIQ_MSI - depends on PCIE_LANTIQ && PCI_MSI - default y - -+config XRX200_PHY_FW -+ bool "XRX200 PHY firmware loader" -+ depends on SOC_XWAY -+ - endif ---- a/drivers/soc/lantiq/Makefile -+++ b/drivers/soc/lantiq/Makefile -@@ -1,2 +1,3 @@ - # SPDX-License-Identifier: GPL-2.0-only - obj-y += fpi-bus.o -+obj-$(CONFIG_XRX200_PHY_FW) += gphy.o ---- /dev/null -+++ b/drivers/soc/lantiq/gphy.c -@@ -0,0 +1,235 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2012 John Crispin <blogic@phrozen.org> -+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com> -+ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de> -+ */ -+ -+#include <linux/clk.h> -+#include <linux/delay.h> -+#include <linux/dma-mapping.h> -+#include <linux/firmware.h> -+#include <linux/mfd/syscon.h> -+#include <linux/module.h> -+#include <linux/reboot.h> -+#include <linux/regmap.h> -+#include <linux/reset.h> -+#include <linux/of_device.h> -+#include <linux/of_platform.h> -+#include <linux/property.h> -+#include <dt-bindings/mips/lantiq_rcu_gphy.h> -+ -+#include <lantiq_soc.h> -+ -+#define XRX200_GPHY_FW_ALIGN (16 * 1024) -+ -+struct xway_gphy_priv { -+ struct clk *gphy_clk_gate; -+ struct reset_control *gphy_reset; -+ struct reset_control *gphy_reset2; -+ void __iomem *membase; -+ char *fw_name; -+}; -+ -+struct xway_gphy_match_data { -+ char *fe_firmware_name; -+ char *ge_firmware_name; -+}; -+ -+static const struct xway_gphy_match_data xrx200a1x_gphy_data = { -+ .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin", -+ .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin", -+}; -+ -+static const struct xway_gphy_match_data xrx200a2x_gphy_data = { -+ .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin", -+ .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin", -+}; -+ -+static const struct xway_gphy_match_data xrx300_gphy_data = { -+ .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin", -+ .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin", -+}; -+ -+static const struct of_device_id xway_gphy_match[] = { -+ { .compatible = "lantiq,xrx200-gphy", .data = NULL }, -+ { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data }, -+ { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data }, -+ { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data }, -+ { .compatible = "lantiq,xrx330-gphy", .data = &xrx300_gphy_data }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, xway_gphy_match); -+ -+static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv, -+ dma_addr_t *dev_addr) -+{ -+ const struct firmware *fw; -+ void *fw_addr; -+ dma_addr_t dma_addr; -+ size_t size; -+ int ret; -+ -+ ret = request_firmware(&fw, priv->fw_name, dev); -+ if (ret) { -+ dev_err(dev, "failed to load firmware: %s, error: %i\n", -+ priv->fw_name, ret); -+ return ret; -+ } -+ -+ /* -+ * GPHY cores need the firmware code in a persistent and contiguous -+ * memory area with a 16 kB boundary aligned start address. -+ */ -+ size = fw->size + XRX200_GPHY_FW_ALIGN; -+ -+ fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL); -+ if (fw_addr) { -+ fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); -+ *dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN); -+ memcpy(fw_addr, fw->data, fw->size); -+ } else { -+ dev_err(dev, "failed to alloc firmware memory\n"); -+ ret = -ENOMEM; -+ } -+ -+ release_firmware(fw); -+ -+ return ret; -+} -+ -+static int xway_gphy_of_probe(struct platform_device *pdev, -+ struct xway_gphy_priv *priv) -+{ -+ struct device *dev = &pdev->dev; -+ const struct xway_gphy_match_data *gphy_fw_name_cfg; -+ u32 gphy_mode; -+ int ret; -+ struct resource *res_gphy; -+ -+ gphy_fw_name_cfg = of_device_get_match_data(dev); -+ -+ if (of_device_is_compatible(pdev->dev.of_node, "lantiq,xrx200-gphy")) -+ switch (ltq_soc_type()) { -+ case SOC_TYPE_VR9: -+ gphy_fw_name_cfg = &xrx200a1x_gphy_data; -+ break; -+ case SOC_TYPE_VR9_2: -+ gphy_fw_name_cfg = &xrx200a2x_gphy_data; -+ break; -+ } -+ -+ priv->gphy_clk_gate = devm_clk_get(dev, NULL); -+ if (IS_ERR(priv->gphy_clk_gate)) { -+ dev_err(dev, "Failed to lookup gate clock\n"); -+ return PTR_ERR(priv->gphy_clk_gate); -+ } -+ -+ res_gphy = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ priv->membase = devm_ioremap_resource(dev, res_gphy); -+ if (IS_ERR(priv->membase)) -+ return PTR_ERR(priv->membase); -+ -+ priv->gphy_reset = devm_reset_control_get(dev, "gphy"); -+ if (IS_ERR(priv->gphy_reset)) { -+ if (PTR_ERR(priv->gphy_reset) != -EPROBE_DEFER) -+ dev_err(dev, "Failed to lookup gphy reset\n"); -+ return PTR_ERR(priv->gphy_reset); -+ } -+ -+ priv->gphy_reset2 = devm_reset_control_get_optional(dev, "gphy2"); -+ if (IS_ERR(priv->gphy_reset2)) -+ return PTR_ERR(priv->gphy_reset2); -+ -+ ret = device_property_read_u32(dev, "lantiq,gphy-mode", &gphy_mode); -+ /* Default to GE mode */ -+ if (ret) -+ gphy_mode = GPHY_MODE_GE; -+ -+ switch (gphy_mode) { -+ case GPHY_MODE_FE: -+ priv->fw_name = gphy_fw_name_cfg->fe_firmware_name; -+ break; -+ case GPHY_MODE_GE: -+ priv->fw_name = gphy_fw_name_cfg->ge_firmware_name; -+ break; -+ default: -+ dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static int xway_gphy_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct xway_gphy_priv *priv; -+ dma_addr_t fw_addr = 0; -+ int ret; -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ ret = xway_gphy_of_probe(pdev, priv); -+ if (ret) -+ return ret; -+ -+ ret = clk_prepare_enable(priv->gphy_clk_gate); -+ if (ret) -+ return ret; -+ -+ ret = xway_gphy_load(dev, priv, &fw_addr); -+ if (ret) { -+ clk_disable_unprepare(priv->gphy_clk_gate); -+ return ret; -+ } -+ -+ reset_control_assert(priv->gphy_reset); -+ reset_control_assert(priv->gphy_reset2); -+ -+ iowrite32be(fw_addr, priv->membase); -+ -+ reset_control_deassert(priv->gphy_reset); -+ reset_control_deassert(priv->gphy_reset2); -+ -+ platform_set_drvdata(pdev, priv); -+ -+ return ret; -+} -+ -+static int xway_gphy_remove(struct platform_device *pdev) -+{ -+ struct xway_gphy_priv *priv = platform_get_drvdata(pdev); -+ -+ iowrite32be(0, priv->membase); -+ -+ clk_disable_unprepare(priv->gphy_clk_gate); -+ -+ return 0; -+} -+ -+static struct platform_driver xway_gphy_driver = { -+ .probe = xway_gphy_probe, -+ .remove = xway_gphy_remove, -+ .driver = { -+ .name = "xway-rcu-gphy", -+ .of_match_table = xway_gphy_match, -+ }, -+}; -+ -+module_platform_driver(xway_gphy_driver); -+ -+MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin"); -+MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin"); -+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin"); -+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin"); -+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin"); -+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin"); -+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); -+MODULE_DESCRIPTION("Lantiq XWAY GPHY Firmware Loader"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch b/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch deleted file mode 100644 index 9b326c50d1..0000000000 --- a/target/linux/lantiq/patches-5.4/0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch +++ /dev/null @@ -1,55 +0,0 @@ -From d0ee51bbb7ce9880749a3d4794ec1fbbcda0f381 Mon Sep 17 00:00:00 2001 -From: Mathias Kresin <dev@kresin.me> -Date: Sun, 7 Jul 2019 21:45:51 +0200 -Subject: [PATCH] MIPS: lantiq revert DSA switch driver PMU/clock changes - -Switch back to the former used names, to make the legacy switch driver -happy. - -Signed-off-by: Mathias Kresin <dev@kresin.me> ---- - arch/mips/lantiq/xway/sysctrl.c | 14 +++++++------- - 1 file changed, 7 insertions(+), 7 deletions(-) - ---- a/arch/mips/lantiq/xway/sysctrl.c -+++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -503,7 +503,7 @@ void __init ltq_soc_init(void) - clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI); - clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); - clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL); -- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); -+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); - clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); - clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); - } else if (of_machine_is_compatible("lantiq,ar10")) { -@@ -511,11 +511,11 @@ void __init ltq_soc_init(void) - ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz()); - clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); - clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1); -- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | -+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, PMU_SWITCH | - PMU_PPE_DP | PMU_PPE_TC); - clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); -- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY); -- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY); -+ clkdev_add_pmu("1f203020.gphy", NULL, 1, 0, PMU_GPHY); -+ clkdev_add_pmu("1f203068.gphy", NULL, 1, 0, PMU_GPHY); - clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); - clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE); - clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); -@@ -534,12 +534,12 @@ void __init ltq_soc_init(void) - clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS); - - clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); -- clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, -+ clkdev_add_pmu("1e108000.eth", NULL, 0, 0, - PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | - PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | - PMU_PPE_QSB | PMU_PPE_TOP); -- clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY); -- clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY); -+ clkdev_add_pmu("1f203020.gphy", NULL, 0, 0, PMU_GPHY); -+ clkdev_add_pmu("1f203068.gphy", NULL, 0, 0, PMU_GPHY); - clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); - clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); - clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); diff --git a/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch b/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch deleted file mode 100644 index 6a2143e17e..0000000000 --- a/target/linux/lantiq/patches-5.4/0025-NET-MIPS-lantiq-adds-xrx200-legacy.patch +++ /dev/null @@ -1,3470 +0,0 @@ -From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Mon, 22 Oct 2012 12:22:23 +0200 -Subject: NET: MIPS: lantiq: adds xrx200 ethernet and switch driver - ---- - drivers/net/ethernet/Kconfig | 8 +- - drivers/net/ethernet/Makefile | 1 + - drivers/net/ethernet/lantiq_pce.h | 163 +++ - drivers/net/ethernet/lantiq_xrx200_legacy.c | 1798 +++++++++++++++++++++++++++++++ - drivers/net/ethernet/lantiq_xrx200_legacy.h | 1328 +++++++++++++++++++++++ - 5 files changed, 3297 insertions(+), 1 deletion(-) - create mode 100644 drivers/net/ethernet/lantiq_pce.h - create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.c - create mode 100644 drivers/net/ethernet/lantiq_xrx200_legacy.h - ---- a/drivers/net/ethernet/Kconfig -+++ b/drivers/net/ethernet/Kconfig -@@ -108,7 +108,13 @@ config LANTIQ_ETOP - tristate "Lantiq SoC ETOP driver" - depends on SOC_TYPE_XWAY - ---help--- -- Support for the MII0 inside the Lantiq SoC -+ Support for the MII0 inside the Lantiq ADSL SoC -+ -+config LANTIQ_XRX200_LEGACY -+ tristate "Lantiq SoC XRX200 driver" -+ depends on SOC_TYPE_XWAY -+ ---help--- -+ Support for the MII0 inside the Lantiq VDSL SoC - - config LANTIQ_XRX200 - tristate "Lantiq / Intel xRX200 PMAC network driver" ---- a/drivers/net/ethernet/Makefile -+++ b/drivers/net/ethernet/Makefile -@@ -51,6 +51,7 @@ obj-$(CONFIG_JME) += jme.o - obj-$(CONFIG_KORINA) += korina.o - obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o - obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o -+obj-$(CONFIG_LANTIQ_XRX200_LEGACY) += lantiq_xrx200_legacy.o - obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/ - obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/ - obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_pce.h -@@ -0,0 +1,163 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland GmbH -+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> -+ * -+ * PCE microcode extracted from UGW5.2 switch api -+ */ -+ -+/* Switch API Micro Code V0.3 */ -+enum { -+ OUT_MAC0 = 0, -+ OUT_MAC1, -+ OUT_MAC2, -+ OUT_MAC3, -+ OUT_MAC4, -+ OUT_MAC5, -+ OUT_ETHTYP, -+ OUT_VTAG0, -+ OUT_VTAG1, -+ OUT_ITAG0, -+ OUT_ITAG1, /*10 */ -+ OUT_ITAG2, -+ OUT_ITAG3, -+ OUT_IP0, -+ OUT_IP1, -+ OUT_IP2, -+ OUT_IP3, -+ OUT_SIP0, -+ OUT_SIP1, -+ OUT_SIP2, -+ OUT_SIP3, /*20*/ -+ OUT_SIP4, -+ OUT_SIP5, -+ OUT_SIP6, -+ OUT_SIP7, -+ OUT_DIP0, -+ OUT_DIP1, -+ OUT_DIP2, -+ OUT_DIP3, -+ OUT_DIP4, -+ OUT_DIP5, /*30*/ -+ OUT_DIP6, -+ OUT_DIP7, -+ OUT_SESID, -+ OUT_PROT, -+ OUT_APP0, -+ OUT_APP1, -+ OUT_IGMP0, -+ OUT_IGMP1, -+ OUT_IPOFF, /*39*/ -+ OUT_NONE = 63 -+}; -+ -+/* parser's microcode length type */ -+#define INSTR 0 -+#define IPV6 1 -+#define LENACCU 2 -+ -+/* parser's microcode flag type */ -+enum { -+ FLAG_ITAG = 0, -+ FLAG_VLAN, -+ FLAG_SNAP, -+ FLAG_PPPOE, -+ FLAG_IPV6, -+ FLAG_IPV6FL, -+ FLAG_IPV4, -+ FLAG_IGMP, -+ FLAG_TU, -+ FLAG_HOP, -+ FLAG_NN1, /*10 */ -+ FLAG_NN2, -+ FLAG_END, -+ FLAG_NO, /*13*/ -+}; -+ -+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */ -+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \ -+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }} -+struct pce_microcode { -+ unsigned short val[4]; -+/* unsigned short val_2; -+ unsigned short val_1; -+ unsigned short val_0;*/ -+} pce_microcode[] = { -+ /* value mask ns fields L type flags ipv4_len */ -+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0), -+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), -+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0), -+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1), -+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0), -+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0), -+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0), -+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0), -+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0), -+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0), -+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), -+}; ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_xrx200_legacy.c -@@ -0,0 +1,1927 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland -+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/switch.h> -+#include <linux/etherdevice.h> -+#include <linux/module.h> -+#include <linux/platform_device.h> -+#include <linux/interrupt.h> -+#include <linux/clk.h> -+#include <linux/if_vlan.h> -+#include <asm/delay.h> -+ -+#include <linux/of_net.h> -+#include <linux/of_mdio.h> -+#include <linux/of_gpio.h> -+#include <linux/of_platform.h> -+ -+#include <xway_dma.h> -+#include <lantiq_soc.h> -+ -+#include "lantiq_pce.h" -+#include "lantiq_xrx200_legacy.h" -+ -+#define SW_POLLING -+#define SW_ROUTING -+ -+#ifdef SW_ROUTING -+#define XRX200_MAX_DEV 2 -+#else -+#define XRX200_MAX_DEV 1 -+#endif -+ -+#define XRX200_MAX_VLAN 64 -+#define XRX200_PCE_ACTVLAN_IDX 0x01 -+#define XRX200_PCE_VLANMAP_IDX 0x02 -+ -+#define XRX200_MAX_PORT 7 -+#define XRX200_MAX_DMA 8 -+ -+#define XRX200_HEADROOM 4 -+ -+#define XRX200_TX_TIMEOUT (10 * HZ) -+ -+/* port type */ -+#define XRX200_PORT_TYPE_PHY 1 -+#define XRX200_PORT_TYPE_MAC 2 -+ -+/* DMA */ -+#define XRX200_DMA_DATA_LEN 0x600 -+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0 -+#define XRX200_DMA_RX 0 -+#define XRX200_DMA_TX 1 -+#define XRX200_DMA_TX_2 3 -+#define XRX200_DMA_IS_TX(x) (x%2) -+#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x)) -+ -+/* fetch / store dma */ -+#define FDMA_PCTRL0 0x2A00 -+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18)) -+#define SDMA_PCTRL0 0x2F00 -+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18)) -+ -+/* buffer management */ -+#define BM_PCFG0 0x200 -+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8)) -+ -+/* MDIO */ -+#define MDIO_GLOB 0x0000 -+#define MDIO_CTRL 0x0020 -+#define MDIO_READ 0x0024 -+#define MDIO_WRITE 0x0028 -+#define MDIO_PHY0 0x0054 -+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned))) -+#define MDIO_CLK_CFG0 0x002C -+#define MDIO_CLK_CFG1 0x0030 -+ -+#define MDIO_GLOB_ENABLE 0x8000 -+#define MDIO_BUSY BIT(12) -+#define MDIO_RD BIT(11) -+#define MDIO_WR BIT(10) -+#define MDIO_MASK 0x1f -+#define MDIO_ADDRSHIFT 5 -+#define MDIO1_25MHZ 9 -+ -+#define MDIO_PHY_LINK_DOWN 0x4000 -+#define MDIO_PHY_LINK_UP 0x2000 -+ -+#define MDIO_PHY_SPEED_M10 0x0000 -+#define MDIO_PHY_SPEED_M100 0x0800 -+#define MDIO_PHY_SPEED_G1 0x1000 -+ -+#define MDIO_PHY_FDUP_EN 0x0200 -+#define MDIO_PHY_FDUP_DIS 0x0600 -+ -+#define MDIO_PHY_LINK_MASK 0x6000 -+#define MDIO_PHY_SPEED_MASK 0x1800 -+#define MDIO_PHY_FDUP_MASK 0x0600 -+#define MDIO_PHY_ADDR_MASK 0x001f -+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \ -+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK -+ -+/* MII */ -+#define MII_CFG(p) (p * 8) -+ -+#define MII_CFG_EN BIT(14) -+ -+#define MII_CFG_MODE_MIIP 0x0 -+#define MII_CFG_MODE_MIIM 0x1 -+#define MII_CFG_MODE_RMIIP 0x2 -+#define MII_CFG_MODE_RMIIM 0x3 -+#define MII_CFG_MODE_RGMII 0x4 -+#define MII_CFG_MODE_MASK 0xf -+ -+#define MII_CFG_RATE_M2P5 0x00 -+#define MII_CFG_RATE_M25 0x10 -+#define MII_CFG_RATE_M125 0x20 -+#define MII_CFG_RATE_M50 0x30 -+#define MII_CFG_RATE_AUTO 0x40 -+#define MII_CFG_RATE_MASK 0x70 -+ -+/* cpu port mac */ -+#define PMAC_HD_CTL 0x0000 -+#define PMAC_RX_IPG 0x0024 -+#define PMAC_EWAN 0x002c -+ -+#define PMAC_IPG_MASK 0xf -+#define PMAC_HD_CTL_AS 0x0008 -+#define PMAC_HD_CTL_AC 0x0004 -+#define PMAC_HD_CTL_RC 0x0010 -+#define PMAC_HD_CTL_RXSH 0x0040 -+#define PMAC_HD_CTL_AST 0x0080 -+#define PMAC_HD_CTL_RST 0x0100 -+ -+/* PCE */ -+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4)) -+#define PCE_TBL_MASK 0x1120 -+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4)) -+#define PCE_TBL_ADDR 0x1138 -+#define PCE_TBL_CTRL 0x113c -+#define PCE_PMAP1 0x114c -+#define PCE_PMAP2 0x1150 -+#define PCE_PMAP3 0x1154 -+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4)) -+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4)) -+ -+#define PCE_TBL_BUSY BIT(15) -+#define PCE_TBL_CFG_ADDR_MASK 0x1f -+#define PCE_TBL_CFG_ADWR 0x20 -+#define PCE_TBL_CFG_ADWR_MASK 0x60 -+#define PCE_INGRESS BIT(11) -+ -+/* MAC */ -+#define MAC_FLEN_REG (0x2314) -+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4)) -+ -+/* buffer management */ -+#define BM_PCFG(p) (0x200 + (p * 8)) -+ -+/* special tag in TX path header */ -+#define SPID_SHIFT 24 -+#define DPID_SHIFT 16 -+#define DPID_ENABLE 1 -+#define SPID_CPU_PORT 2 -+#define PORT_MAP_SEL BIT(15) -+#define PORT_MAP_EN BIT(14) -+#define PORT_MAP_SHIFT 1 -+#define PORT_MAP_MASK 0x3f -+ -+#define SPPID_MASK 0x7 -+#define SPPID_SHIFT 4 -+ -+/* MII regs not yet in linux */ -+#define MDIO_DEVAD_NONE (-1) -+#define ADVERTIZE_MPD (1 << 10) -+ -+struct xrx200_port { -+ u8 num; -+ u8 phy_addr; -+ u16 flags; -+ phy_interface_t phy_if; -+ -+ int link; -+ int gpio; -+ enum of_gpio_flags gpio_flags; -+ -+ struct phy_device *phydev; -+ struct device_node *phy_node; -+}; -+ -+struct xrx200_chan { -+ int idx; -+ int refcount; -+ int tx_free; -+ -+ struct net_device dummy_dev; -+ struct net_device *devs[XRX200_MAX_DEV]; -+ -+ struct tasklet_struct tasklet; -+ struct napi_struct napi; -+ struct ltq_dma_channel dma; -+ struct sk_buff *skb[LTQ_DESC_NUM]; -+ -+ spinlock_t lock; -+}; -+ -+struct xrx200_hw { -+ struct clk *clk; -+ struct mii_bus *mii_bus; -+ u8 phy_addr[XRX200_MAX_PORT]; -+ -+ struct xrx200_chan chan[XRX200_MAX_DMA]; -+ u16 vlan_vid[XRX200_MAX_VLAN]; -+ u16 vlan_port_map[XRX200_MAX_VLAN]; -+ -+ struct net_device *devs[XRX200_MAX_DEV]; -+ int num_devs; -+ -+ int port_map[XRX200_MAX_PORT]; -+ unsigned short wan_map; -+ -+ struct switch_dev swdev; -+}; -+ -+struct xrx200_priv { -+ struct net_device_stats stats; -+ int id; -+ -+ struct xrx200_port port[XRX200_MAX_PORT]; -+ int num_port; -+ bool wan; -+ bool sw; -+ unsigned short port_map; -+ unsigned char mac[6]; -+ -+ struct xrx200_hw *hw; -+}; -+ -+static __iomem void *xrx200_switch_membase; -+static __iomem void *xrx200_mii_membase; -+static __iomem void *xrx200_mdio_membase; -+static __iomem void *xrx200_pmac_membase; -+ -+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x)) -+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y)) -+#define ltq_switch_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_switch_membase + (z)) -+ -+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x)) -+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y)) -+#define ltq_mdio_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z)) -+ -+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x)) -+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y)) -+#define ltq_mii_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_mii_membase + (z)) -+ -+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x)) -+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y)) -+#define ltq_pmac_w32_mask(x, y, z) \ -+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z)) -+ -+#define XRX200_GLOBAL_REGATTR(reg) \ -+ .id = reg, \ -+ .type = SWITCH_TYPE_INT, \ -+ .set = xrx200_set_global_attr, \ -+ .get = xrx200_get_global_attr -+ -+#define XRX200_PORT_REGATTR(reg) \ -+ .id = reg, \ -+ .type = SWITCH_TYPE_INT, \ -+ .set = xrx200_set_port_attr, \ -+ .get = xrx200_get_port_attr -+ -+static int xrx200sw_read_x(int reg, int x) -+{ -+ int value, mask, addr; -+ -+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x); -+ value = ltq_switch_r32(addr); -+ mask = (1 << xrx200sw_reg[reg].size) - 1; -+ value = (value >> xrx200sw_reg[reg].shift); -+ -+ return (value & mask); -+} -+ -+static int xrx200sw_read(int reg) -+{ -+ return xrx200sw_read_x(reg, 0); -+} -+ -+static void xrx200sw_write_x(int value, int reg, int x) -+{ -+ int mask, addr; -+ -+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x); -+ mask = (1 << xrx200sw_reg[reg].size) - 1; -+ mask = (mask << xrx200sw_reg[reg].shift); -+ value = (value << xrx200sw_reg[reg].shift) & mask; -+ -+ ltq_switch_w32_mask(mask, value, addr); -+} -+ -+static void xrx200sw_write(int value, int reg) -+{ -+ xrx200sw_write_x(value, reg, 0); -+} -+ -+struct xrx200_pce_table_entry { -+ int index; // PCE_TBL_ADDR.ADDR = pData->table_index -+ int table; // PCE_TBL_CTRL.ADDR = pData->table -+ unsigned short key[8]; -+ unsigned short val[5]; -+ unsigned short mask; -+ unsigned short type; -+ unsigned short valid; -+ unsigned short gmap; -+}; -+ -+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl) -+{ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ // prepare the table access: -+ // PCE_TBL_ADDR.ADDR = pData->table_index -+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR); -+ // PCE_TBL_CTRL.ADDR = pData->table -+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR); -+ -+ //(address-based read) -+ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD -+ -+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access -+ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ // read the keys -+ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7); -+ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6); -+ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5); -+ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4); -+ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3); -+ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2); -+ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1); -+ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0); -+ -+ // read the values -+ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4); -+ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3); -+ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2); -+ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1); -+ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0); -+ -+ // read the mask -+ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0); -+ // read the type -+ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE); -+ // read the valid flag -+ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD); -+ // read the group map -+ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP); -+ -+ return 0; -+} -+ -+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl) -+{ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ // prepare the table access: -+ // PCE_TBL_ADDR.ADDR = pData->table_index -+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR); -+ // PCE_TBL_CTRL.ADDR = pData->table -+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR); -+ -+ //(address-based write) -+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD -+ -+ // read the keys -+ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7); -+ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6); -+ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5); -+ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4); -+ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3); -+ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2); -+ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1); -+ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0); -+ -+ // read the values -+ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4); -+ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3); -+ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2); -+ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1); -+ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0); -+ -+ // read the mask -+ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0); -+ // read the type -+ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE); -+ // read the valid flag -+ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD); -+ // read the group map -+ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP); -+ -+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access -+ -+ // wait until hardware is ready -+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; -+ -+ return 0; -+} -+ -+static void xrx200sw_fixup_pvids(void) -+{ -+ int index, p, portmap, untagged; -+ struct xrx200_pce_table_entry tem; -+ struct xrx200_pce_table_entry tev; -+ -+ portmap = 0; -+ for (p = 0; p < XRX200_MAX_PORT; p++) -+ portmap |= BIT(p); -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ -+ for (index = XRX200_MAX_VLAN; index-- > 0;) -+ { -+ tev.index = index; -+ xrx200_pce_table_entry_read(&tev); -+ -+ if (tev.valid == 0) -+ continue; -+ -+ tem.index = index; -+ xrx200_pce_table_entry_read(&tem); -+ -+ if (tem.val[0] == 0) -+ continue; -+ -+ untagged = portmap & (tem.val[1] ^ tem.val[2]); -+ -+ for (p = 0; p < XRX200_MAX_PORT; p++) -+ if (untagged & BIT(p)) -+ { -+ portmap &= ~BIT(p); -+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p); -+ } -+ -+ for (p = 0; p < XRX200_MAX_PORT; p++) -+ if (portmap & BIT(p)) -+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p); -+ } -+} -+ -+// swconfig interface -+static void xrx200_hw_init(struct xrx200_hw *hw); -+ -+// global -+static int xrx200sw_reset_switch(struct switch_dev *dev) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ -+ xrx200_hw_init(hw); -+ -+ return 0; -+} -+ -+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ int p; -+ -+ if ((attr->max > 0) && (val->value.i > attr->max)) -+ return -EINVAL; -+ -+ for (p = 0; p < XRX200_MAX_PORT; p++) { -+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p); -+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p); -+ } -+ -+ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN); -+ return 0; -+} -+ -+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ val->value.i = xrx200sw_read(attr->id); -+ return 0; -+} -+ -+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ if ((attr->max > 0) && (val->value.i > attr->max)) -+ return -EINVAL; -+ -+ xrx200sw_write(val->value.i, attr->id); -+ return 0; -+} -+ -+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ val->value.i = xrx200sw_read(attr->id); -+ return 0; -+} -+ -+// vlan -+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ int i; -+ struct xrx200_pce_table_entry tev; -+ struct xrx200_pce_table_entry tem; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ -+ for (i = 0; i < XRX200_MAX_VLAN; i++) -+ { -+ tev.index = i; -+ xrx200_pce_table_entry_read(&tev); -+ if (tev.key[0] == val->value.i && i != val->port_vlan) -+ return -EINVAL; -+ } -+ -+ hw->vlan_vid[val->port_vlan] = val->value.i; -+ -+ tev.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tev); -+ tev.key[0] = val->value.i; -+ tev.valid = val->value.i > 0; -+ xrx200_pce_table_entry_write(&tev); -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ tem.val[0] = val->value.i; -+ xrx200_pce_table_entry_write(&tem); -+ -+ xrx200sw_fixup_pvids(); -+ return 0; -+} -+ -+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_pce_table_entry te; -+ -+ te.table = XRX200_PCE_ACTVLAN_IDX; -+ te.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&te); -+ val->value.i = te.key[0]; -+ -+ return 0; -+} -+ -+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ int i, portmap, tagmap, untagged; -+ struct xrx200_pce_table_entry tem; -+ -+ portmap = 0; -+ tagmap = 0; -+ for (i = 0; i < val->len; i++) -+ { -+ struct switch_port *p = &val->value.ports[i]; -+ -+ portmap |= (1 << p->id); -+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) -+ tagmap |= (1 << p->id); -+ } -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ -+ untagged = portmap ^ tagmap; -+ for (i = 0; i < XRX200_MAX_VLAN; i++) -+ { -+ tem.index = i; -+ xrx200_pce_table_entry_read(&tem); -+ -+ if (tem.val[0] == 0) -+ continue; -+ -+ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i)) -+ return -EINVAL; -+ } -+ -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ -+ // auto-enable this vlan if not enabled already -+ if (tem.val[0] == 0) -+ { -+ struct switch_val v; -+ v.port_vlan = val->port_vlan; -+ v.value.i = val->port_vlan; -+ if(xrx200sw_set_vlan_vid(dev, NULL, &v)) -+ return -EINVAL; -+ -+ //read updated tem -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ } -+ -+ tem.val[1] = portmap; -+ tem.val[2] = tagmap; -+ xrx200_pce_table_entry_write(&tem); -+ -+ ltq_switch_w32_mask(0, portmap, PCE_PMAP2); -+ ltq_switch_w32_mask(0, portmap, PCE_PMAP3); -+ hw->vlan_port_map[val->port_vlan] = portmap; -+ -+ xrx200sw_fixup_pvids(); -+ -+ return 0; -+} -+ -+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ int i; -+ unsigned short ports, tags; -+ struct xrx200_pce_table_entry tem; -+ -+ tem.table = XRX200_PCE_VLANMAP_IDX; -+ tem.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tem); -+ -+ ports = tem.val[1]; -+ tags = tem.val[2]; -+ -+ for (i = 0; i < XRX200_MAX_PORT; i++) { -+ struct switch_port *p; -+ -+ if (!(ports & (1 << i))) -+ continue; -+ -+ p = &val->value.ports[val->len++]; -+ p->id = i; -+ if (tags & (1 << i)) -+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); -+ else -+ p->flags = 0; -+ } -+ -+ return 0; -+} -+ -+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_pce_table_entry tev; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ tev.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tev); -+ -+ if (tev.key[0] == 0) -+ return -EINVAL; -+ -+ tev.valid = val->value.i; -+ xrx200_pce_table_entry_write(&tev); -+ -+ xrx200sw_fixup_pvids(); -+ return 0; -+} -+ -+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct xrx200_pce_table_entry tev; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ tev.index = val->port_vlan; -+ xrx200_pce_table_entry_read(&tev); -+ val->value.i = tev.valid; -+ -+ return 0; -+} -+ -+// port -+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val) -+{ -+ struct xrx200_pce_table_entry tev; -+ -+ if (port >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ tev.table = XRX200_PCE_ACTVLAN_IDX; -+ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port); -+ xrx200_pce_table_entry_read(&tev); -+ -+ *val = tev.key[0]; -+ return 0; -+} -+ -+static int xrx200sw_get_port_link(struct switch_dev *dev, -+ int port, -+ struct switch_port_link *link) -+{ -+ if (port >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port); -+ if (!link->link) -+ return 0; -+ -+ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port); -+ -+ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010); -+ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020); -+ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port)); -+ -+ link->speed = SWITCH_PORT_SPEED_10; -+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port)) -+ link->speed = SWITCH_PORT_SPEED_100; -+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port)) -+ link->speed = SWITCH_PORT_SPEED_1000; -+ -+ return 0; -+} -+ -+static int xrx200sw_set_port_link(struct switch_dev *dev, int port, -+ struct switch_port_link *link) -+{ -+ if (port >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ return switch_generic_set_link(dev, port, link); -+} -+ -+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val); -+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg); -+ -+static int xrx200sw_phy_read16(struct switch_dev *dev, int addr, u8 reg, u16 *value) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ -+ *value = xrx200_mdio_rd(hw->mii_bus, hw->phy_addr[addr], reg); -+ -+ return 0; -+} -+ -+static int xrx200sw_phy_write16(struct switch_dev *dev, int addr, u8 reg, u16 value) -+{ -+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); -+ -+ return xrx200_mdio_wr(hw->mii_bus, hw->phy_addr[addr], reg, value); -+} -+ -+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ if (val->port_vlan >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ if ((attr->max > 0) && (val->value.i > attr->max)) -+ return -EINVAL; -+ -+ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan); -+ return 0; -+} -+ -+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) -+{ -+ if (val->port_vlan >= XRX200_MAX_PORT) -+ return -EINVAL; -+ -+ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan); -+ return 0; -+} -+ -+// attributes -+static struct switch_attr xrx200sw_globals[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .set = xrx200_set_vlan_mode_enable, -+ .get = xrx200_get_vlan_mode_enable, -+ .name = "enable_vlan", -+ .description = "Enable VLAN mode", -+ .max = 1}, -+}; -+ -+static struct switch_attr xrx200sw_port[] = { -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR), -+ .name = "uvr", -+ .description = "Unknown VLAN Rule", -+ .max = 1, -+ }, -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR), -+ .name = "vsr", -+ .description = "VLAN Security Rule", -+ .max = 1, -+ }, -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR), -+ .name = "vinr", -+ .description = "VLAN Ingress Tag Rule", -+ .max = 2, -+ }, -+ { -+ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM), -+ .name = "tvm", -+ .description = "Transparent VLAN Mode", -+ .max = 1, -+ }, -+}; -+ -+static struct switch_attr xrx200sw_vlan[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "vid", -+ .description = "VLAN ID (0-4094)", -+ .set = xrx200sw_set_vlan_vid, -+ .get = xrx200sw_get_vlan_vid, -+ .max = 4094, -+ }, -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable", -+ .description = "Enable VLAN", -+ .set = xrx200sw_set_vlan_enable, -+ .get = xrx200sw_get_vlan_enable, -+ .max = 1, -+ }, -+}; -+ -+static const struct switch_dev_ops xrx200sw_ops = { -+ .attr_global = { -+ .attr = xrx200sw_globals, -+ .n_attr = ARRAY_SIZE(xrx200sw_globals), -+ }, -+ .attr_port = { -+ .attr = xrx200sw_port, -+ .n_attr = ARRAY_SIZE(xrx200sw_port), -+ }, -+ .attr_vlan = { -+ .attr = xrx200sw_vlan, -+ .n_attr = ARRAY_SIZE(xrx200sw_vlan), -+ }, -+ .get_vlan_ports = xrx200sw_get_vlan_ports, -+ .set_vlan_ports = xrx200sw_set_vlan_ports, -+ .get_port_pvid = xrx200sw_get_port_pvid, -+ .reset_switch = xrx200sw_reset_switch, -+ .get_port_link = xrx200sw_get_port_link, -+ .set_port_link = xrx200sw_set_port_link, -+// .get_port_stats = xrx200sw_get_port_stats, //TODO -+ .phy_read16 = xrx200sw_phy_read16, -+ .phy_write16 = xrx200sw_phy_write16, -+}; -+ -+static int xrx200sw_init(struct xrx200_hw *hw) -+{ -+ int netdev_num; -+ -+ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++) -+ { -+ struct switch_dev *swdev; -+ struct net_device *dev = hw->devs[netdev_num]; -+ struct xrx200_priv *priv = netdev_priv(dev); -+ if (!priv->sw) -+ continue; -+ -+ swdev = &hw->swdev; -+ -+ swdev->name = "Lantiq XRX200 Switch"; -+ swdev->vlans = XRX200_MAX_VLAN; -+ swdev->ports = XRX200_MAX_PORT; -+ swdev->cpu_port = 6; -+ swdev->ops = &xrx200sw_ops; -+ -+ register_switch(swdev, dev); -+ return 0; // enough switches -+ } -+ return 0; -+} -+ -+static int xrx200_open(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ for (i = 0; i < XRX200_MAX_DMA; i++) { -+ if (!priv->hw->chan[i].dma.irq) -+ continue; -+ spin_lock_bh(&priv->hw->chan[i].lock); -+ if (!priv->hw->chan[i].refcount) { -+ if (XRX200_DMA_IS_RX(i)) -+ napi_enable(&priv->hw->chan[i].napi); -+ ltq_dma_open(&priv->hw->chan[i].dma); -+ ltq_dma_enable_irq(&priv->hw->chan[i].dma); -+ } -+ priv->hw->chan[i].refcount++; -+ spin_unlock_bh(&priv->hw->chan[i].lock); -+ } -+ for (i = 0; i < priv->num_port; i++) -+ if (priv->port[i].phydev) -+ phy_start(priv->port[i].phydev); -+ netif_wake_queue(dev); -+ -+ return 0; -+} -+ -+static int xrx200_close(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ netif_stop_queue(dev); -+ -+ for (i = 0; i < priv->num_port; i++) -+ if (priv->port[i].phydev) -+ phy_stop(priv->port[i].phydev); -+ -+ for (i = 0; i < XRX200_MAX_DMA; i++) { -+ if (!priv->hw->chan[i].dma.irq) -+ continue; -+ -+ priv->hw->chan[i].refcount--; -+ if (!priv->hw->chan[i].refcount) { -+ if (XRX200_DMA_IS_RX(i)) -+ napi_disable(&priv->hw->chan[i].napi); -+ spin_lock_bh(&priv->hw->chan[i].lock); -+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma); -+ spin_unlock_bh(&priv->hw->chan[i].lock); -+ } -+ } -+ -+ return 0; -+} -+ -+static int xrx200_alloc_skb(struct xrx200_chan *ch) -+{ -+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD) -+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD); -+ if (!ch->skb[ch->dma.desc]) -+ goto skip; -+ -+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD); -+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(ch->dma.dev, -+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN, -+ DMA_FROM_DEVICE); -+ ch->dma.desc_base[ch->dma.desc].addr = -+ CPHYSADDR(ch->skb[ch->dma.desc]->data); -+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN); -+ -+skip: -+ ch->dma.desc_base[ch->dma.desc].ctl = -+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | -+ XRX200_DMA_DATA_LEN; -+ -+ return 0; -+} -+ -+static void xrx200_hw_receive(struct xrx200_chan *ch, int id) -+{ -+ struct net_device *dev = ch->devs[id]; -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -+ struct sk_buff *skb = ch->skb[ch->dma.desc]; -+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK); -+ int ret; -+ -+ ret = xrx200_alloc_skb(ch); -+ -+ ch->dma.desc++; -+ ch->dma.desc %= LTQ_DESC_NUM; -+ -+ if (ret) { -+ netdev_err(dev, -+ "failed to allocate new rx buffer\n"); -+ return; -+ } -+ -+ skb_put(skb, len); -+#ifdef SW_ROUTING -+ skb_pull(skb, 8); -+#endif -+ skb->dev = dev; -+ skb->protocol = eth_type_trans(skb, dev); -+ netif_receive_skb(skb); -+ priv->stats.rx_packets++; -+ priv->stats.rx_bytes+=len; -+} -+ -+static int xrx200_poll_rx(struct napi_struct *napi, int budget) -+{ -+ struct xrx200_chan *ch = container_of(napi, -+ struct xrx200_chan, napi); -+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]); -+ int rx = 0; -+ int complete = 0; -+ -+ while ((rx < budget) && !complete) { -+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; -+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { -+#ifdef SW_ROUTING -+ struct sk_buff *skb = ch->skb[ch->dma.desc]; -+ u8 *special_tag = (u8*)skb->data; -+ int port = (special_tag[7] >> SPPID_SHIFT) & SPPID_MASK; -+ xrx200_hw_receive(ch, priv->hw->port_map[port]); -+#else -+ xrx200_hw_receive(ch, 0); -+#endif -+ rx++; -+ } else { -+ complete = 1; -+ } -+ } -+ -+ if (complete || !rx) { -+ napi_complete(&ch->napi); -+ ltq_dma_enable_irq(&ch->dma); -+ } -+ -+ return rx; -+} -+ -+static void xrx200_tx_housekeeping(unsigned long ptr) -+{ -+ struct xrx200_chan *ch = (struct xrx200_chan *) ptr; -+ int pkts = 0; -+ int i; -+ -+ spin_lock_bh(&ch->lock); -+ ltq_dma_ack_irq(&ch->dma); -+ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { -+ struct sk_buff *skb = ch->skb[ch->tx_free]; -+ -+ pkts++; -+ ch->skb[ch->tx_free] = NULL; -+ dev_kfree_skb(skb); -+ memset(&ch->dma.desc_base[ch->tx_free], 0, -+ sizeof(struct ltq_dma_desc)); -+ ch->tx_free++; -+ ch->tx_free %= LTQ_DESC_NUM; -+ } -+ ltq_dma_enable_irq(&ch->dma); -+ spin_unlock_bh(&ch->lock); -+ -+ if (!pkts) -+ return; -+ -+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) -+ netif_wake_queue(ch->devs[i]); -+} -+ -+static struct net_device_stats *xrx200_get_stats (struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ -+ return &priv->stats; -+} -+ -+static void xrx200_tx_timeout(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ -+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name); -+ -+ priv->stats.tx_errors++; -+ netif_wake_queue(dev); -+} -+ -+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct xrx200_chan *ch; -+ struct ltq_dma_desc *desc; -+ u32 byte_offset; -+ int ret = NETDEV_TX_OK; -+ int len; -+#ifdef SW_ROUTING -+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE; -+#endif -+ if(priv->id) -+ ch = &priv->hw->chan[XRX200_DMA_TX_2]; -+ else -+ ch = &priv->hw->chan[XRX200_DMA_TX]; -+ -+ desc = &ch->dma.desc_base[ch->dma.desc]; -+ -+ skb->dev = dev; -+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; -+ -+#ifdef SW_ROUTING -+ if (is_multicast_ether_addr(eth_hdr(skb)->h_dest)) { -+ u16 port_map = priv->port_map; -+ -+ if (priv->sw && skb->protocol == htons(ETH_P_8021Q)) { -+ u16 vid; -+ int i; -+ -+ port_map = 0; -+ if (!__vlan_get_tag(skb, &vid)) { -+ for (i = 0; i < XRX200_MAX_VLAN; i++) { -+ if (priv->hw->vlan_vid[i] != vid) -+ continue; -+ port_map = priv->hw->vlan_port_map[i]; -+ break; -+ } -+ } -+ } -+ -+ special_tag |= (port_map << PORT_MAP_SHIFT) | -+ PORT_MAP_SEL | PORT_MAP_EN; -+ } -+ if(priv->wan) -+ special_tag |= (1 << DPID_SHIFT); -+ if(skb_headroom(skb) < 4) { -+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4); -+ dev_kfree_skb_any(skb); -+ skb = tmp; -+ } -+ skb_push(skb, 4); -+ memcpy(skb->data, &special_tag, sizeof(u32)); -+ len += 4; -+#endif -+ -+ /* dma needs to start on a 16 byte aligned address */ -+ byte_offset = CPHYSADDR(skb->data) % 16; -+ -+ spin_lock_bh(&ch->lock); -+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { -+ netdev_err(dev, "tx ring full\n"); -+ netif_stop_queue(dev); -+ ret = NETDEV_TX_BUSY; -+ goto out; -+ } -+ -+ ch->skb[ch->dma.desc] = skb; -+ -+ netif_trans_update(dev); -+ -+ desc->addr = ((unsigned int) dma_map_single(ch->dma.dev, skb->data, len, -+ DMA_TO_DEVICE)) - byte_offset; -+ wmb(); -+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | -+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); -+ ch->dma.desc++; -+ ch->dma.desc %= LTQ_DESC_NUM; -+ if (ch->dma.desc == ch->tx_free) -+ netif_stop_queue(dev); -+ -+ -+ priv->stats.tx_packets++; -+ priv->stats.tx_bytes+=len; -+ -+out: -+ spin_unlock_bh(&ch->lock); -+ -+ return ret; -+} -+ -+static irqreturn_t xrx200_dma_irq(int irq, void *priv) -+{ -+ struct xrx200_hw *hw = priv; -+ int chnr = irq - XRX200_DMA_IRQ; -+ struct xrx200_chan *ch = &hw->chan[chnr]; -+ -+ ltq_dma_disable_irq(&ch->dma); -+ ltq_dma_ack_irq(&ch->dma); -+ -+ if (chnr % 2) -+ tasklet_schedule(&ch->tasklet); -+ else -+ napi_schedule(&ch->napi); -+ -+ return IRQ_HANDLED; -+} -+ -+static int xrx200_dma_init(struct device *dev, struct xrx200_hw *hw) -+{ -+ int i, err = 0; -+ -+ ltq_dma_init_port(DMA_PORT_ETOP); -+ -+ for (i = 0; i < 8 && !err; i++) { -+ int irq = XRX200_DMA_IRQ + i; -+ struct xrx200_chan *ch = &hw->chan[i]; -+ -+ spin_lock_init(&ch->lock); -+ -+ ch->idx = ch->dma.nr = i; -+ ch->dma.dev = dev; -+ -+ if (i == XRX200_DMA_TX) { -+ ltq_dma_alloc_tx(&ch->dma); -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw); -+ } else if (i == XRX200_DMA_TX_2) { -+ ltq_dma_alloc_tx(&ch->dma); -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx_2", hw); -+ } else if (i == XRX200_DMA_RX) { -+ ltq_dma_alloc_rx(&ch->dma); -+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; -+ ch->dma.desc++) -+ if (xrx200_alloc_skb(ch)) -+ err = -ENOMEM; -+ ch->dma.desc = 0; -+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw); -+ } else -+ continue; -+ -+ if (!err) -+ ch->dma.irq = irq; -+ else -+ pr_err("net-xrx200: failed to request irq %d\n", irq); -+ } -+ -+ return err; -+} -+ -+#ifdef SW_POLLING -+static void xrx200_gmac_update(struct xrx200_port *port) -+{ -+ u16 phyaddr = port->phydev->mdio.addr & MDIO_PHY_ADDR_MASK; -+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK; -+ u16 miirate = 0; -+ -+ switch (port->phydev->speed) { -+ case SPEED_1000: -+ phyaddr |= MDIO_PHY_SPEED_G1; -+ miirate = MII_CFG_RATE_M125; -+ break; -+ -+ case SPEED_100: -+ phyaddr |= MDIO_PHY_SPEED_M100; -+ switch (miimode) { -+ case MII_CFG_MODE_RMIIM: -+ case MII_CFG_MODE_RMIIP: -+ miirate = MII_CFG_RATE_M50; -+ break; -+ default: -+ miirate = MII_CFG_RATE_M25; -+ break; -+ } -+ break; -+ -+ default: -+ phyaddr |= MDIO_PHY_SPEED_M10; -+ miirate = MII_CFG_RATE_M2P5; -+ break; -+ } -+ -+ if (port->phydev->link) -+ phyaddr |= MDIO_PHY_LINK_UP; -+ else -+ phyaddr |= MDIO_PHY_LINK_DOWN; -+ -+ if (port->phydev->duplex == DUPLEX_FULL) -+ phyaddr |= MDIO_PHY_FDUP_EN; -+ else -+ phyaddr |= MDIO_PHY_FDUP_DIS; -+ -+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num)); -+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num)); -+ udelay(1); -+} -+#else -+static void xrx200_gmac_update(struct xrx200_port *port) -+{ -+ -+} -+#endif -+ -+static void xrx200_mdio_link(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ for (i = 0; i < priv->num_port; i++) { -+ if (!priv->port[i].phydev) -+ continue; -+ -+ if (priv->port[i].link != priv->port[i].phydev->link) { -+ xrx200_gmac_update(&priv->port[i]); -+ priv->port[i].link = priv->port[i].phydev->link; -+ netdev_info(dev, "port %d %s link\n", -+ priv->port[i].num, -+ (priv->port[i].link)?("got"):("lost")); -+ } -+ } -+} -+ -+static inline int xrx200_mdio_poll(struct mii_bus *bus) -+{ -+ unsigned cnt = 10000; -+ -+ while (likely(cnt--)) { -+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL); -+ if ((ctrl & MDIO_BUSY) == 0) -+ return 0; -+ } -+ -+ return 1; -+} -+ -+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) -+{ -+ if (xrx200_mdio_poll(bus)) -+ return 1; -+ -+ ltq_mdio_w32(val, MDIO_WRITE); -+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR | -+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | -+ (reg & MDIO_MASK), -+ MDIO_CTRL); -+ -+ return 0; -+} -+ -+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg) -+{ -+ if (xrx200_mdio_poll(bus)) -+ return -1; -+ -+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD | -+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | -+ (reg & MDIO_MASK), -+ MDIO_CTRL); -+ -+ if (xrx200_mdio_poll(bus)) -+ return -1; -+ -+ return ltq_mdio_r32(MDIO_READ); -+} -+ -+static int xrx200_phy_has_link(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ int i; -+ -+ for (i = 0; i < priv->num_port; i++) { -+ if (!priv->port[i].phydev) -+ continue; -+ -+ if (priv->port[i].phydev->link) -+ return 1; -+ } -+ -+ return 0; -+} -+ -+static void xrx200_phy_link_change(struct phy_device *phydev, bool up, bool do_carrier) -+{ -+ struct net_device *netdev = phydev->attached_dev; -+ -+ if (do_carrier) { -+ if (up) -+ netif_carrier_on(netdev); -+ else if (!xrx200_phy_has_link(netdev)) -+ netif_carrier_off(netdev); -+ } -+ -+ phydev->adjust_link(netdev); -+} -+ -+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct phy_device *phydev = NULL; -+ unsigned val; -+ -+ phydev = mdiobus_get_phy(priv->hw->mii_bus, port->phy_addr); -+ -+ if (!phydev) { -+ netdev_err(dev, "no PHY found\n"); -+ return -ENODEV; -+ } -+ -+ phydev = phy_connect(dev, phydev_name(phydev), &xrx200_mdio_link, -+ port->phy_if); -+ -+ if (IS_ERR(phydev)) { -+ netdev_err(dev, "Could not attach to PHY\n"); -+ return PTR_ERR(phydev); -+ } -+ -+ linkmode_zero(phydev->supported); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, phydev->supported); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_MII_BIT, phydev->supported); -+ linkmode_set_bit_array(phy_10_100_features_array, -+ ARRAY_SIZE(phy_10_100_features_array), -+ phydev->supported); -+ linkmode_set_bit_array(phy_gbit_features_array, -+ ARRAY_SIZE(phy_gbit_features_array), -+ phydev->supported); -+ linkmode_copy(phydev->advertising, phydev->supported); -+ -+ port->phydev = phydev; -+ phydev->phy_link_change = xrx200_phy_link_change; -+ -+ phy_attached_info(phydev); -+ -+#ifdef SW_POLLING -+ phy_read_status(phydev); -+ -+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000); -+ val |= ADVERTIZE_MPD; -+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val); -+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040); -+ -+ phy_start_aneg(phydev); -+#endif -+ return 0; -+} -+ -+static void xrx200_port_config(struct xrx200_priv *priv, -+ const struct xrx200_port *port) -+{ -+ u16 miimode = 0; -+ -+ switch (port->num) { -+ case 0: /* xMII0 */ -+ case 1: /* xMII1 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ if (port->flags & XRX200_PORT_TYPE_PHY) -+ /* MII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ else -+ /* MII PHY mode, connected to external MAC */ -+ miimode = MII_CFG_MODE_MIIP; -+ break; -+ case PHY_INTERFACE_MODE_RMII: -+ if (port->flags & XRX200_PORT_TYPE_PHY) -+ /* RMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RMIIM; -+ else -+ /* RMII PHY mode, connected to external MAC */ -+ miimode = MII_CFG_MODE_RMIIP; -+ break; -+ case PHY_INTERFACE_MODE_RGMII: -+ /* RGMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RGMII; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 2: /* internal GPHY0 */ -+ case 3: /* internal GPHY0 */ -+ case 4: /* internal GPHY1 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ case PHY_INTERFACE_MODE_GMII: -+ /* MII MAC mode, connected to internal GPHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 5: /* internal GPHY1 or xMII2 */ -+ switch (port->phy_if) { -+ case PHY_INTERFACE_MODE_MII: -+ /* MII MAC mode, connected to internal GPHY */ -+ miimode = MII_CFG_MODE_MIIM; -+ break; -+ case PHY_INTERFACE_MODE_RGMII: -+ /* RGMII MAC mode, connected to external PHY */ -+ miimode = MII_CFG_MODE_RGMII; -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN, -+ MII_CFG(port->num)); -+} -+ -+static int xrx200_init(struct net_device *dev) -+{ -+ struct xrx200_priv *priv = netdev_priv(dev); -+ struct sockaddr mac; -+ int err, i; -+ -+#ifndef SW_POLLING -+ unsigned int reg = 0; -+ -+ /* enable auto polling */ -+ for (i = 0; i < priv->num_port; i++) -+ reg |= BIT(priv->port[i].num); -+ ltq_mdio_w32(reg, MDIO_CLK_CFG0); -+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1); -+#endif -+ -+ /* setup each port */ -+ for (i = 0; i < priv->num_port; i++) -+ xrx200_port_config(priv, &priv->port[i]); -+ -+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); -+ if (!is_valid_ether_addr(mac.sa_data)) { -+ pr_warn("net-xrx200: invalid MAC, using random\n"); -+ eth_random_addr(mac.sa_data); -+ dev->addr_assign_type |= NET_ADDR_RANDOM; -+ } -+ -+ err = eth_mac_addr(dev, &mac); -+ if (err) -+ goto err_netdev; -+ -+ for (i = 0; i < priv->num_port; i++) -+ if (xrx200_mdio_probe(dev, &priv->port[i])) -+ pr_warn("xrx200-mdio: probing phy of port %d failed\n", -+ priv->port[i].num); -+ -+ return 0; -+ -+err_netdev: -+ unregister_netdev(dev); -+ free_netdev(dev); -+ return err; -+} -+ -+static void xrx200_pci_microcode(void) -+{ -+ int i; -+ -+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK, -+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL); -+ ltq_switch_w32(0, PCE_TBL_MASK); -+ -+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) { -+ ltq_switch_w32(i, PCE_TBL_ADDR); -+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0)); -+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1)); -+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2)); -+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3)); -+ -+ // start the table access: -+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL); -+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY); -+ } -+ -+ /* tell the switch that the microcode is loaded */ -+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0)); -+} -+ -+static void xrx200_hw_init(struct xrx200_hw *hw) -+{ -+ int i; -+ -+ /* enable clock gate */ -+ clk_enable(hw->clk); -+ -+ ltq_switch_w32(1, 0); -+ mdelay(100); -+ ltq_switch_w32(0, 0); -+ /* -+ * TODO: we should really disbale all phys/miis here and explicitly -+ * enable them in the device secific init function -+ */ -+ -+ /* disable port fetch/store dma */ -+ for (i = 0; i < 7; i++ ) { -+ ltq_switch_w32(0, FDMA_PCTRLx(i)); -+ ltq_switch_w32(0, SDMA_PCTRLx(i)); -+ } -+ -+ /* enable Switch */ -+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB); -+ -+ /* load the pce microcode */ -+ xrx200_pci_microcode(); -+ -+ /* Default unknown Broadcat/Multicast/Unicast port maps */ -+ ltq_switch_w32(0x40, PCE_PMAP1); -+ ltq_switch_w32(0x40, PCE_PMAP2); -+ ltq_switch_w32(0x40, PCE_PMAP3); -+ -+ /* RMON Counter Enable for all physical ports */ -+ for (i = 0; i < 7; i++) -+ ltq_switch_w32(0x1, BM_PCFG(i)); -+ -+ /* disable auto polling */ -+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0); -+ -+ /* enable port statistic counters */ -+ for (i = 0; i < 7; i++) -+ ltq_switch_w32(0x1, BM_PCFGx(i)); -+ -+ /* set IPG to 12 */ -+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG); -+ -+#ifdef SW_ROUTING -+ /* enable status header, enable CRC */ -+ ltq_pmac_w32_mask(0, -+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC, -+ PMAC_HD_CTL); -+#else -+ /* disable status header, enable CRC */ -+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS, -+ PMAC_HD_CTL_AC | PMAC_HD_CTL_RC, -+ PMAC_HD_CTL); -+#endif -+ -+ /* enable port fetch/store dma & VLAN Modification */ -+ for (i = 0; i < 7; i++ ) { -+ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i)); -+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i)); -+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0)); -+ } -+ -+ /* enable special tag insertion on cpu port */ -+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6)); -+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0)); -+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2)); -+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG); -+ xrx200sw_write_x(1, XRX200_BM_QUEUE_GCTRL_GL_MOD, 0); -+ -+ for (i = 0; i < XRX200_MAX_VLAN; i++) -+ hw->vlan_vid[i] = i; -+} -+ -+static void xrx200_hw_cleanup(struct xrx200_hw *hw) -+{ -+ int i; -+ -+ /* disable the switch */ -+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB); -+ -+ /* free the channels and IRQs */ -+ for (i = 0; i < 2; i++) { -+ ltq_dma_free(&hw->chan[i].dma); -+ if (hw->chan[i].dma.irq) -+ free_irq(hw->chan[i].dma.irq, hw); -+ } -+ -+ /* free the allocated RX ring */ -+ for (i = 0; i < LTQ_DESC_NUM; i++) -+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]); -+ -+ /* clear the mdio bus */ -+ mdiobus_unregister(hw->mii_bus); -+ mdiobus_free(hw->mii_bus); -+ -+ /* release the clock */ -+ clk_disable(hw->clk); -+ clk_put(hw->clk); -+} -+ -+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np) -+{ -+ hw->mii_bus = mdiobus_alloc(); -+ if (!hw->mii_bus) -+ return -ENOMEM; -+ -+ hw->mii_bus->read = xrx200_mdio_rd; -+ hw->mii_bus->write = xrx200_mdio_wr; -+ hw->mii_bus->name = "lantiq,xrx200-mdio"; -+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0); -+ -+ if (of_mdiobus_register(hw->mii_bus, np)) { -+ mdiobus_free(hw->mii_bus); -+ return -ENXIO; -+ } -+ -+ return 0; -+} -+ -+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port) -+{ -+ const __be32 *addr, *id = of_get_property(port, "reg", NULL); -+ struct xrx200_port *p = &priv->port[priv->num_port]; -+ -+ if (!id) -+ return; -+ -+ memset(p, 0, sizeof(struct xrx200_port)); -+ p->phy_node = of_parse_phandle(port, "phy-handle", 0); -+ addr = of_get_property(p->phy_node, "reg", NULL); -+ if (!addr) -+ return; -+ -+ p->num = *id; -+ p->phy_addr = *addr; -+ p->phy_if = of_get_phy_mode(port); -+ if (p->phy_addr > 0x10) -+ p->flags = XRX200_PORT_TYPE_MAC; -+ else -+ p->flags = XRX200_PORT_TYPE_PHY; -+ priv->num_port++; -+ -+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags); -+ if (gpio_is_valid(p->gpio)) -+ if (!gpio_request(p->gpio, "phy-reset")) { -+ gpio_direction_output(p->gpio, -+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0)); -+ udelay(100); -+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); -+ } -+ /* is this port a wan port ? */ -+ if (priv->wan) -+ priv->hw->wan_map |= BIT(p->num); -+ -+ priv->port_map |= BIT(p->num); -+ -+ /* store the port id in the hw struct so we can map ports -> devices */ -+ priv->hw->port_map[p->num] = priv->hw->num_devs; -+ -+ /* store the phy addr in the hw struct so we can map ports -> phys */ -+ priv->hw->phy_addr[p->num] = p->phy_addr; -+} -+ -+static const struct net_device_ops xrx200_netdev_ops = { -+ .ndo_init = xrx200_init, -+ .ndo_open = xrx200_open, -+ .ndo_stop = xrx200_close, -+ .ndo_start_xmit = xrx200_start_xmit, -+ .ndo_set_mac_address = eth_mac_addr, -+ .ndo_validate_addr = eth_validate_addr, -+ .ndo_get_stats = xrx200_get_stats, -+ .ndo_tx_timeout = xrx200_tx_timeout, -+}; -+ -+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface, struct device *dev) -+{ -+ struct xrx200_priv *priv; -+ struct device_node *port; -+ const __be32 *wan; -+ const u8 *mac; -+ -+ /* alloc the network device */ -+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv)); -+ if (!hw->devs[hw->num_devs]) -+ return; -+ -+ /* setup the network device */ -+ strcpy(hw->devs[hw->num_devs]->name, "eth%d"); -+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops; -+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT; -+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM; -+ SET_NETDEV_DEV(hw->devs[hw->num_devs], dev); -+ -+ /* setup our private data */ -+ priv = netdev_priv(hw->devs[hw->num_devs]); -+ priv->hw = hw; -+ priv->id = hw->num_devs; -+ -+ mac = of_get_mac_address(iface); -+ if (!IS_ERR(mac)) -+ memcpy(priv->mac, mac, ETH_ALEN); -+ -+ /* is this the wan interface ? */ -+ wan = of_get_property(iface, "lantiq,wan", NULL); -+ if (wan && (*wan == 1)) -+ priv->wan = 1; -+ -+ /* should the switch be enabled on this interface ? */ -+ if (of_find_property(iface, "lantiq,switch", NULL)) -+ priv->sw = 1; -+ -+ /* load the ports that are part of the interface */ -+ for_each_child_of_node(iface, port) -+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port")) -+ xrx200_of_port(priv, port); -+ -+ /* register the actual device */ -+ if (!register_netdev(hw->devs[hw->num_devs])) -+ hw->num_devs++; -+} -+ -+static struct xrx200_hw xrx200_hw; -+ -+static int xrx200_probe(struct platform_device *pdev) -+{ -+ struct resource *res[4]; -+ struct device_node *mdio_np, *iface_np, *phy_np; -+ struct of_phandle_iterator it; -+ int err; -+ int i; -+ -+ /* load the memory ranges */ -+ for (i = 0; i < 4; i++) { -+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i); -+ if (!res[i]) { -+ dev_err(&pdev->dev, "failed to get resources\n"); -+ return -ENOENT; -+ } -+ } -+ xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]); -+ xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]); -+ xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]); -+ xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]); -+ if (!xrx200_switch_membase || !xrx200_mdio_membase || -+ !xrx200_mii_membase || !xrx200_pmac_membase) { -+ dev_err(&pdev->dev, "failed to request and remap io ranges \n"); -+ return -ENOMEM; -+ } -+ -+ of_for_each_phandle(&it, err, pdev->dev.of_node, "lantiq,phys", NULL, 0) { -+ phy_np = it.node; -+ if (phy_np) { -+ struct platform_device *phy = of_find_device_by_node(phy_np); -+ -+ of_node_put(phy_np); -+ if (!platform_get_drvdata(phy)) -+ return -EPROBE_DEFER; -+ } -+ } -+ -+ /* get the clock */ -+ xrx200_hw.clk = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(xrx200_hw.clk)) { -+ dev_err(&pdev->dev, "failed to get clock\n"); -+ return PTR_ERR(xrx200_hw.clk); -+ } -+ -+ /* bring up the dma engine and IP core */ -+ xrx200_dma_init(&pdev->dev, &xrx200_hw); -+ xrx200_hw_init(&xrx200_hw); -+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX]); -+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX_2].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX_2]); -+ -+ /* bring up the mdio bus */ -+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL, -+ "lantiq,xrx200-mdio"); -+ if (mdio_np) -+ if (xrx200_of_mdio(&xrx200_hw, mdio_np)) -+ dev_err(&pdev->dev, "mdio probe failed\n"); -+ -+ /* load the interfaces */ -+ for_each_child_of_node(pdev->dev.of_node, iface_np) -+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) { -+ if (xrx200_hw.num_devs < XRX200_MAX_DEV) -+ xrx200_of_iface(&xrx200_hw, iface_np, &pdev->dev); -+ else -+ dev_err(&pdev->dev, -+ "only %d interfaces allowed\n", -+ XRX200_MAX_DEV); -+ } -+ -+ if (!xrx200_hw.num_devs) { -+ xrx200_hw_cleanup(&xrx200_hw); -+ dev_err(&pdev->dev, "failed to load interfaces\n"); -+ return -ENOENT; -+ } -+ -+ xrx200sw_init(&xrx200_hw); -+ -+ /* set wan port mask */ -+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN); -+ -+ for (i = 0; i < xrx200_hw.num_devs; i++) { -+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i]; -+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i]; -+ xrx200_hw.chan[XRX200_DMA_TX_2].devs[i] = xrx200_hw.devs[i]; -+ } -+ -+ /* setup NAPI */ -+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev); -+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev, -+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32); -+ -+ platform_set_drvdata(pdev, &xrx200_hw); -+ -+ return 0; -+} -+ -+static int xrx200_remove(struct platform_device *pdev) -+{ -+ struct net_device *dev = platform_get_drvdata(pdev); -+ struct xrx200_priv *priv; -+ -+ if (!dev) -+ return 0; -+ -+ priv = netdev_priv(dev); -+ -+ /* free stack related instances */ -+ netif_stop_queue(dev); -+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi); -+ -+ /* shut down hardware */ -+ xrx200_hw_cleanup(&xrx200_hw); -+ -+ /* remove the actual device */ -+ unregister_netdev(dev); -+ free_netdev(dev); -+ -+ return 0; -+} -+ -+static const struct of_device_id xrx200_match[] = { -+ { .compatible = "lantiq,xrx200-net" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, xrx200_match); -+ -+static struct platform_driver xrx200_driver = { -+ .probe = xrx200_probe, -+ .remove = xrx200_remove, -+ .driver = { -+ .name = "lantiq,xrx200-net", -+ .of_match_table = xrx200_match, -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+module_platform_driver(xrx200_driver); -+ -+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); -+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet"); -+MODULE_LICENSE("GPL"); ---- /dev/null -+++ b/drivers/net/ethernet/lantiq_xrx200_legacy.h -@@ -0,0 +1,1328 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * Copyright (C) 2010 Lantiq Deutschland GmbH -+ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com> -+ * -+ * VR9 switch registers extracted from 310TUJ0 switch api -+ * WARNING mult values of 0x00 may not be correct -+ * -+ */ -+ -+enum { -+// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */ -+// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */ -+// XRX200_ETHSW_SWRES_R0, /* Register Configuration */ -+// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */ -+// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */ -+// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */ -+// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */ -+// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */ -+// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */ -+// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */ -+// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */ -+// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */ -+// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */ -+// XRX200_ETHSW_DBG_MODE, /* Debug Mode */ -+// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */ -+// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */ -+// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */ -+// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */ -+// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */ -+// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */ -+// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */ -+// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */ -+// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */ -+// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */ -+// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */ -+// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */ -+// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */ -+// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */ -+// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */ -+// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */ -+// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */ -+// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */ -+// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */ -+// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */ -+// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */ -+// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */ -+// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */ -+// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */ -+// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */ -+// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */ -+// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */ -+// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */ -+// XRX200_ETHSW_CAP_6_APPL, /* Application table size */ -+// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */ -+// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */ -+// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */ -+// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */ -+// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */ -+// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */ -+// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */ -+// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */ -+// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */ -+// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */ -+// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */ -+// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */ -+// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */ -+// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */ -+// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */ -+// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */ -+// XRX200_ETHSW_IER, /* Interrupt Enable Register */ -+// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */ -+// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */ -+// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */ -+// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */ -+// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */ -+// XRX200_ETHSW_ISR, /* Interrupt Status Register */ -+// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */ -+// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */ -+// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */ -+// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */ -+// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */ -+// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */ -+// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */ -+// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */ -+// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */ -+// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */ -+// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */ -+// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */ -+// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */ -+// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */ -+// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */ -+// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */ -+// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */ -+// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */ -+// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */ -+// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */ -+// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */ -+// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */ -+// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */ -+// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */ -+// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */ -+// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */ -+// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */ -+// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */ -+// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */ -+// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */ -+// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */ -+// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */ -+// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */ -+// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */ -+// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */ -+// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */ -+// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */ -+// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */ -+// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */ -+// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */ -+// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */ -+// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */ -+// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */ -+// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */ -+// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */ -+// XRX200_BM_RAM_ADDR, /* RAM Address Register */ -+// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */ -+// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */ -+// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */ -+// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */ -+// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */ -+// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */ -+// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */ -+// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */ -+// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */ -+// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */ -+// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */ -+// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */ -+// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */ -+// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */ -+// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */ -+// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */ -+// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */ -+// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */ -+// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */ -+// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */ -+// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */ -+// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */ -+// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */ -+// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */ -+// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */ -+// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */ -+// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */ -+ XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */ -+// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */ -+// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */ -+// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */ -+// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */ -+// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */ -+// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */ -+// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */ -+// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */ -+// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */ -+// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */ -+// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */ -+// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */ -+// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */ -+// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */ -+// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */ -+// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */ -+// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */ -+// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */ -+// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */ -+// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */ -+// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */ -+// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */ -+// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */ -+// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */ -+// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */ -+// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */ -+// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */ -+// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */ -+// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */ -+// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */ -+// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */ -+// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */ -+// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */ -+// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */ -+// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */ -+// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */ -+// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */ -+// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */ -+// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */ -+// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */ -+// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */ -+// XRX200_BM_CISEL_PORT, /* Port Number */ -+// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */ -+// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */ -+// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */ -+// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */ -+// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */ -+// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */ -+// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */ -+// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */ -+// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */ -+// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */ -+// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */ -+// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */ -+// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */ -+// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */ -+// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */ -+// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */ -+// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */ -+// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */ -+// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */ -+// XRX200_RS_CBS_CBS, /* Committed Burst Size */ -+// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */ -+// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */ -+// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */ -+// XRX200_RS_CIR_EXP_EXP, /* Exponent */ -+// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */ -+// XRX200_RS_CIR_MANT_MANT, /* Mantissa */ -+ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */ -+// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */ -+// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */ -+// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */ -+// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */ -+// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */ -+// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */ -+// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */ -+ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */ -+// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */ -+ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */ -+// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */ -+ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */ -+// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */ -+// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */ -+// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */ -+// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */ -+ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */ -+// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */ -+// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */ -+ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */ -+// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */ -+ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */ -+ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */ -+ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */ -+ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */ -+ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */ -+ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */ -+// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */ -+// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */ -+// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */ -+// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */ -+// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */ -+// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */ -+// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */ -+// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */ -+// XRX200_PCE_PMAP_1, /* Port Map Register 1 */ -+// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */ -+// XRX200_PCE_PMAP_2, /* Port Map Register 2 */ -+// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */ -+// XRX200_PCE_PMAP_3, /* Port Map Register 3 */ -+// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */ -+// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */ -+// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */ -+ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */ -+// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */ -+// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */ -+// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */ -+// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */ -+// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */ -+// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */ -+// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */ -+// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */ -+// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */ -+// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */ -+// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */ -+// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */ -+// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */ -+// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */ -+// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */ -+// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */ -+// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */ -+// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */ -+// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */ -+// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */ -+// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */ -+// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */ -+// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */ -+// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */ -+// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */ -+// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */ -+// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */ -+// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */ -+// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */ -+// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */ -+// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */ -+// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */ -+// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */ -+// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */ -+// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */ -+// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */ -+// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */ -+// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */ -+// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */ -+// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */ -+// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */ -+// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */ -+// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */ -+// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */ -+// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */ -+// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */ -+// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */ -+// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */ -+// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */ -+// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */ -+// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */ -+// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */ -+// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */ -+// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */ -+// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */ -+// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */ -+// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */ -+// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */ -+// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */ -+// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */ -+// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */ -+// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */ -+// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */ -+// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */ -+// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */ -+// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */ -+// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */ -+// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */ -+// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */ -+// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */ -+// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */ -+// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */ -+// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */ -+// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */ -+// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */ -+// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */ -+// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */ -+// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */ -+// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */ -+// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */ -+// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */ -+// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */ -+// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */ -+// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */ -+ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */ -+// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */ -+// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */ -+// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */ -+// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */ -+// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */ -+// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */ -+// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */ -+// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */ -+// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */ -+// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */ -+// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */ -+// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */ -+// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */ -+// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */ -+// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */ -+// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */ -+// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */ -+// XRX200_WOL_CTRL_PORT, /* WoL Enable */ -+// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */ -+ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */ -+ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */ -+ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */ -+ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */ -+ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */ -+// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */ -+ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */ -+// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */ -+// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */ -+// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */ -+// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */ -+// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */ -+// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */ -+// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */ -+// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */ -+// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */ -+// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */ -+// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */ -+// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */ -+// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */ -+// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */ -+// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */ -+// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */ -+// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */ -+// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */ -+// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */ -+// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */ -+// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */ -+// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */ -+// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */ -+// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */ -+// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */ -+// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */ -+// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */ -+// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */ -+// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */ -+// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */ -+// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */ -+// XRX200_MAC_TEST, /* MAC Test Register */ -+// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */ -+// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */ -+// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */ -+// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */ -+// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */ -+// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */ -+// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */ -+// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */ -+// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */ -+// XRX200_MAC_FLEN, /* MAC Frame Length Register */ -+// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */ -+// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */ -+// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */ -+// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */ -+// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */ -+// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */ -+// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */ -+// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */ -+// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */ -+// XRX200_MAC_PSTAT, /* MAC Port Status Register */ -+// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */ -+ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */ -+ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */ -+ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */ -+// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */ -+// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */ -+// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */ -+// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */ -+ XRX200_MAC_PSTAT_LSTAT, /* Link Status */ -+// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */ -+// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */ -+// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */ -+// XRX200_MAC_PISR, /* MAC Interrupt Status Register */ -+// XRX200_MAC_PISR_PACT, /* PHY Active Status */ -+// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */ -+// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */ -+// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */ -+// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */ -+// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */ -+// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */ -+// XRX200_MAC_PISR_JAM, /* Jam Status Detected */ -+// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */ -+// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */ -+// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */ -+// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */ -+// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */ -+// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */ -+// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */ -+// XRX200_MAC_PIER_PACT, /* PHY Active Status */ -+// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */ -+// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */ -+// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */ -+// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */ -+// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */ -+// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */ -+// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */ -+// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */ -+// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */ -+// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */ -+// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */ -+// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */ -+// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */ -+// XRX200_MAC_CTRL_0, /* MAC Control Register0 */ -+// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */ -+// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */ -+// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */ -+// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */ -+// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */ -+// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */ -+// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */ -+ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */ -+// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */ -+// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */ -+// XRX200_MAC_CTRL_1, /* MAC Control Register1 */ -+// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */ -+// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */ -+// XRX200_MAC_CTRL_2, /* MAC Control Register2 */ -+// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */ -+// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */ -+// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */ -+// XRX200_MAC_CTRL_3, /* MAC Control Register3 */ -+// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */ -+// XRX200_MAC_CTRL_4, /* MAC Control Register4 */ -+// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */ -+// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */ -+// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */ -+// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */ -+// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */ -+// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */ -+// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */ -+// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */ -+// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */ -+// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */ -+// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */ -+// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */ -+// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */ -+// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */ -+// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */ -+// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */ -+// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */ -+// XRX200_MAC_TESTEN, /* MAC Test Enable Register */ -+// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */ -+// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */ -+// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */ -+// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */ -+// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */ -+// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */ -+// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */ -+// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */ -+// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */ -+// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */ -+// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */ -+// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */ -+// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */ -+// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */ -+// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */ -+// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */ -+// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */ -+// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */ -+// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */ -+// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */ -+// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */ -+// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */ -+// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */ -+// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */ -+// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */ -+// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */ -+// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */ -+// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */ -+// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */ -+// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */ -+// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */ -+// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */ -+// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */ -+// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */ -+// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */ -+// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */ -+// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */ -+// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */ -+// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */ -+// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */ -+// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */ -+// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */ -+// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */ -+// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */ -+// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */ -+// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */ -+// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */ -+// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */ -+// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */ -+// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */ -+// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */ -+// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */ -+// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */ -+// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */ -+// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */ -+// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */ -+// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */ -+// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */ -+// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */ -+// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */ -+// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */ -+// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */ -+// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */ -+// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */ -+// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */ -+// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */ -+// XRX200_SDMA_IER_BFULL, /* Buffer Full */ -+// XRX200_SDMA_IER_FERR, /* Frame Error */ -+// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */ -+// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */ -+// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */ -+// XRX200_SDMA_ISR_BFULL, /* Buffer Full */ -+// XRX200_SDMA_ISR_FERR, /* Frame Error */ -+// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */ -+// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */ -+// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */ -+// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */ -+// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */ -+// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */ -+// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */ -+// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */ -+// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */ -+// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */ -+// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */ -+// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */ -+// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */ -+// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */ -+// XRX200_SDMA_PCTRL_PEN, /* Port Enable */ -+// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */ -+// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */ -+// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */ -+// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */ -+// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */ -+// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */ -+// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */ -+// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */ -+// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */ -+// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */ -+}; -+ -+ -+struct xrx200sw_reg { -+ int offset; -+ int shift; -+ int size; -+ int mult; -+} xrx200sw_reg[] = { -+// offeset shift size mult -+// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */ -+// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */ -+// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */ -+// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */ -+// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */ -+// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */ -+// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */ -+// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */ -+// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */ -+// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */ -+// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */ -+// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */ -+// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */ -+// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */ -+// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */ -+// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */ -+// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */ -+// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */ -+// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */ -+// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */ -+// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */ -+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */ -+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */ -+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */ -+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */ -+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */ -+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */ -+// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */ -+// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */ -+// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */ -+// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */ -+// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */ -+// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */ -+// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */ -+// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */ -+// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */ -+// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */ -+// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */ -+// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */ -+// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */ -+// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */ -+// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */ -+// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */ -+// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */ -+// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */ -+// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */ -+// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */ -+// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */ -+// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */ -+// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */ -+// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */ -+// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */ -+// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */ -+// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */ -+// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */ -+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */ -+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */ -+// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */ -+// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */ -+// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */ -+// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */ -+// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */ -+// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */ -+// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */ -+// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */ -+// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */ -+// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */ -+// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */ -+// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */ -+// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */ -+// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */ -+// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */ -+// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */ -+// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */ -+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */ -+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */ -+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */ -+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */ -+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */ -+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */ -+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */ -+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */ -+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */ -+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */ -+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */ -+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */ -+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */ -+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */ -+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */ -+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */ -+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */ -+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */ -+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */ -+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */ -+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */ -+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */ -+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */ -+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */ -+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */ -+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */ -+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */ -+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */ -+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */ -+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */ -+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */ -+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */ -+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */ -+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */ -+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */ -+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */ -+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */ -+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */ -+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */ -+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */ -+// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */ -+// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */ -+// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */ -+// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */ -+// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */ -+// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */ -+// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */ -+// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */ -+// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */ -+// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */ -+// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */ -+// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */ -+// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */ -+// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */ -+// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */ -+// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */ -+// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */ -+// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */ -+// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */ -+// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */ -+// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */ -+// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */ -+// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */ -+// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */ -+// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */ -+// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */ -+// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */ -+// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */ -+ {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */ -+// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */ -+// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */ -+// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */ -+// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */ -+// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */ -+// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */ -+// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */ -+// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */ -+// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */ -+// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */ -+// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */ -+// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */ -+// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */ -+// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */ -+// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */ -+// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */ -+// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */ -+// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */ -+// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */ -+// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */ -+// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */ -+// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */ -+// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */ -+// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */ -+// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */ -+// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */ -+// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */ -+// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */ -+// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */ -+// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */ -+// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */ -+// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */ -+// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */ -+// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */ -+// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */ -+// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */ -+// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */ -+// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */ -+// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */ -+// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */ -+// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */ -+// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */ -+// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */ -+// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */ -+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */ -+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */ -+// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */ -+// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */ -+// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */ -+// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */ -+// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */ -+// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */ -+// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */ -+// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */ -+// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */ -+// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */ -+// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */ -+// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */ -+// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */ -+// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */ -+// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */ -+// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */ -+// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */ -+// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */ -+// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */ -+// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */ -+// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */ -+// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */ -+ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */ -+// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */ -+ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */ -+// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */ -+ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */ -+// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */ -+ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */ -+// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */ -+ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */ -+// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */ -+ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */ -+// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */ -+ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */ -+// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */ -+ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */ -+// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */ -+ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */ -+// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */ -+ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */ -+// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */ -+ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */ -+// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */ -+ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */ -+// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */ -+ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */ -+// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */ -+ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */ -+// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */ -+// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */ -+ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */ -+// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */ -+ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */ -+ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */ -+ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */ -+ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */ -+ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */ -+ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */ -+// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */ -+// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */ -+// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */ -+// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */ -+// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */ -+// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */ -+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */ -+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */ -+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */ -+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */ -+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */ -+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */ -+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */ -+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */ -+// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */ -+// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */ -+ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */ -+// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */ -+// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */ -+// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */ -+// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */ -+// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */ -+// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */ -+// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */ -+// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */ -+// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */ -+// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */ -+// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */ -+// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */ -+// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */ -+// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */ -+// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */ -+// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */ -+// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */ -+// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */ -+// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */ -+// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */ -+// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */ -+// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */ -+// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */ -+// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */ -+// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */ -+// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */ -+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */ -+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */ -+// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */ -+// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */ -+// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */ -+// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */ -+// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */ -+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */ -+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */ -+// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */ -+// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */ -+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */ -+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */ -+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */ -+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */ -+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */ -+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */ -+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */ -+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */ -+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */ -+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */ -+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */ -+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */ -+// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */ -+// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */ -+// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */ -+// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */ -+// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */ -+// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */ -+// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */ -+// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */ -+// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */ -+// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */ -+// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */ -+// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */ -+// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */ -+// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */ -+// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */ -+// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */ -+// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */ -+// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */ -+// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */ -+// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */ -+// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */ -+// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */ -+// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */ -+// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */ -+// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */ -+// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */ -+// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */ -+// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */ -+// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */ -+// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */ -+// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */ -+// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */ -+// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */ -+// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */ -+// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */ -+// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */ -+// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */ -+// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */ -+// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */ -+// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */ -+// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */ -+// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */ -+// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */ -+// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */ -+// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */ -+// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */ -+// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */ -+// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */ -+// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */ -+// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */ -+// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */ -+// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */ -+// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */ -+// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */ -+// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */ -+// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */ -+// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */ -+// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */ -+// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */ -+// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */ -+// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */ -+// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */ -+// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */ -+// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */ -+// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */ -+// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */ -+// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */ -+ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */ -+// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */ -+// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */ -+// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */ -+// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */ -+// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */ -+// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */ -+// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */ -+// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */ -+// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */ -+// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */ -+// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */ -+// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */ -+// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */ -+// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */ -+// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */ -+// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */ -+// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */ -+// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */ -+// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */ -+// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */ -+// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */ -+// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */ -+// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */ -+// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */ -+// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */ -+// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */ -+ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */ -+ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */ -+ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */ -+ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */ -+ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */ -+// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */ -+ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */ -+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */ -+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */ -+// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */ -+// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */ -+// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */ -+// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */ -+// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */ -+// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */ -+// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */ -+// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */ -+// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */ -+// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */ -+// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */ -+// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */ -+// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */ -+// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */ -+// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */ -+// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */ -+// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */ -+// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */ -+// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */ -+// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */ -+// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */ -+// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */ -+// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */ -+// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */ -+// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */ -+// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */ -+// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */ -+// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */ -+// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */ -+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */ -+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */ -+// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */ -+// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */ -+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */ -+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */ -+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */ -+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */ -+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */ -+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */ -+// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */ -+// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */ -+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */ -+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */ -+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */ -+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */ -+// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */ -+// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */ -+// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */ -+// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */ -+// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */ -+// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */ -+ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */ -+ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */ -+ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */ -+// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */ -+// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */ -+// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */ -+// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */ -+ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */ -+// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */ -+// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */ -+// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */ -+// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */ -+// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */ -+// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */ -+// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */ -+// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */ -+// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */ -+// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */ -+// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */ -+// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */ -+// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */ -+// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */ -+// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */ -+// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */ -+// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */ -+// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */ -+// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */ -+// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */ -+// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */ -+// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */ -+// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */ -+// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */ -+// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */ -+// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */ -+// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */ -+// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */ -+// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */ -+// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */ -+// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */ -+// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */ -+// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */ -+// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */ -+// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */ -+// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */ -+// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */ -+// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */ -+// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */ -+// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */ -+// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */ -+ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */ -+// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */ -+// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */ -+// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */ -+// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */ -+// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */ -+// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */ -+// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */ -+// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */ -+// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */ -+// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */ -+// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */ -+// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */ -+// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */ -+// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */ -+// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */ -+// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */ -+// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */ -+// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */ -+// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */ -+// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */ -+// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */ -+// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */ -+// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */ -+// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */ -+// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */ -+// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */ -+// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */ -+// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */ -+// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */ -+// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */ -+// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */ -+// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */ -+// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */ -+// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */ -+// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */ -+// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */ -+// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */ -+// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */ -+// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */ -+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */ -+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */ -+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */ -+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */ -+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */ -+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */ -+// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */ -+// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */ -+// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */ -+// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */ -+// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */ -+// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */ -+// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */ -+// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */ -+// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */ -+// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */ -+// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */ -+// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */ -+// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */ -+// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */ -+// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */ -+// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */ -+// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */ -+// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */ -+// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */ -+// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */ -+// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */ -+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */ -+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */ -+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */ -+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */ -+// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */ -+// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */ -+// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */ -+// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */ -+// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */ -+// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */ -+// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */ -+// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */ -+// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */ -+// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */ -+// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */ -+// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */ -+// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */ -+// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */ -+// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */ -+// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */ -+// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */ -+// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */ -+// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */ -+// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */ -+// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */ -+// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */ -+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */ -+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */ -+// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */ -+// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */ -+// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */ -+// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */ -+// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */ -+// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */ -+// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */ -+// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */ -+// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */ -+// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */ -+// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */ -+// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */ -+// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */ -+// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */ -+// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */ -+// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */ -+// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */ -+// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */ -+// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */ -+// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */ -+// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */ -+// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */ -+// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */ -+// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */ -+// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */ -+// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */ -+// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */ -+// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */ -+// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */ -+// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */ -+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */ -+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */ -+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */ -+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */ -+}; -+ -+ diff --git a/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch b/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch deleted file mode 100644 index 8fd29161fe..0000000000 --- a/target/linux/lantiq/patches-5.4/0026-MIPS-lantiq-Add-GPHY-Firmware-loader.patch +++ /dev/null @@ -1,352 +0,0 @@ -From c8eedcadc38a5e6008d3990fbe0a5285b30335fc Mon Sep 17 00:00:00 2001 -From: Mathias Kresin <dev@kresin.me> -Date: Sun, 7 Jul 2019 21:48:56 +0200 -Subject: [PATCH] MIPS: lantiq: Add GPHY Firmware loader - -Upstream, the GPHY Firmware loader has been merged into the DSA switch -driver. But we don't use the driver yet, so bring it back. - -Signed-off-by: Mathias Kresin <dev@kresin.me> ---- - .../bindings/mips/lantiq/rcu-gphy.txt | 36 +++ - .../devicetree/bindings/mips/lantiq/rcu.txt | 18 ++ - arch/mips/configs/xway_defconfig | 1 + - arch/mips/lantiq/Kconfig | 4 + - drivers/soc/lantiq/Makefile | 1 + - drivers/soc/lantiq/gphy.c | 224 ++++++++++++++++++ - 6 files changed, 284 insertions(+) - create mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt - create mode 100644 drivers/soc/lantiq/gphy.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt -@@ -0,0 +1,37 @@ -+Lantiq XWAY SoC GPHY binding -+============================ -+ -+This binding describes a software-defined ethernet PHY, provided by the RCU -+module on newer Lantiq XWAY SoCs (xRX200 and newer). -+ -+------------------------------------------------------------------------------- -+Required properties: -+- compatible : Should be one of -+ "lantiq,xrx200-gphy" -+ "lantiq,xrx200a1x-gphy" -+ "lantiq,xrx200a2x-gphy" -+ "lantiq,xrx300-gphy" -+ "lantiq,xrx330-gphy" -+- reg : Addrress of the GPHY FW load address register -+- resets : Must reference the RCU GPHY reset bit -+- reset-names : One entry, value must be "gphy" or optional "gphy2" -+- clocks : A reference to the (PMU) GPHY clock gate -+ -+Optional properties: -+- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in -+ <dt-bindings/mips/lantiq_xway_gphy.h> -+ -+ -+------------------------------------------------------------------------------- -+Example for the GPHys on the xRX200 SoCs: -+ -+#include <dt-bindings/mips/lantiq_rcu_gphy.h> -+ gphy0: gphy@20 { -+ compatible = "lantiq,xrx200a2x-gphy"; -+ reg = <0x20 0x4>; -+ -+ resets = <&reset0 31 30>, <&reset1 7 7>; -+ reset-names = "gphy", "gphy2"; -+ clocks = <&pmu0 XRX200_PMU_GATE_GPHY>; -+ lantiq,gphy-mode = <GPHY_MODE_GE>; -+ }; ---- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt -+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt -@@ -26,6 +26,24 @@ Example of the RCU bindings on a xRX200 - ranges = <0x0 0x203000 0x100>; - big-endian; - -+ gphy0: gphy@20 { -+ compatible = "lantiq,xrx200a2x-gphy"; -+ reg = <0x20 0x4>; -+ -+ resets = <&reset0 31 30>, <&reset1 7 7>; -+ reset-names = "gphy", "gphy2"; -+ lantiq,gphy-mode = <GPHY_MODE_GE>; -+ }; -+ -+ gphy1: gphy@68 { -+ compatible = "lantiq,xrx200a2x-gphy"; -+ reg = <0x68 0x4>; -+ -+ resets = <&reset0 29 28>, <&reset1 6 6>; -+ reset-names = "gphy", "gphy2"; -+ lantiq,gphy-mode = <GPHY_MODE_GE>; -+ }; -+ - reset0: reset-controller@10 { - compatible = "lantiq,xrx200-reset"; - reg = <0x10 4>, <0x14 4>; ---- a/arch/mips/configs/xway_defconfig -+++ b/arch/mips/configs/xway_defconfig -@@ -13,6 +13,7 @@ CONFIG_EMBEDDED=y - # CONFIG_COMPAT_BRK is not set - CONFIG_LANTIQ=y - CONFIG_PCI_LANTIQ=y -+CONFIG_XRX200_PHY_FW=y - CONFIG_CPU_MIPS32_R2=y - CONFIG_MIPS_VPE_LOADER=y - CONFIG_NR_CPUS=2 ---- a/arch/mips/lantiq/Kconfig -+++ b/arch/mips/lantiq/Kconfig -@@ -62,4 +62,8 @@ config PCIE_LANTIQ_MSI - depends on PCIE_LANTIQ && PCI_MSI - default y - -+config XRX200_PHY_FW -+ bool "XRX200 PHY firmware loader" -+ depends on SOC_XWAY -+ - endif ---- a/drivers/soc/lantiq/Makefile -+++ b/drivers/soc/lantiq/Makefile -@@ -1,2 +1,3 @@ - # SPDX-License-Identifier: GPL-2.0-only - obj-y += fpi-bus.o -+obj-$(CONFIG_XRX200_PHY_FW) += gphy.o ---- /dev/null -+++ b/drivers/soc/lantiq/gphy.c -@@ -0,0 +1,235 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2012 John Crispin <blogic@phrozen.org> -+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com> -+ * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de> -+ */ -+ -+#include <linux/clk.h> -+#include <linux/delay.h> -+#include <linux/dma-mapping.h> -+#include <linux/firmware.h> -+#include <linux/mfd/syscon.h> -+#include <linux/module.h> -+#include <linux/reboot.h> -+#include <linux/regmap.h> -+#include <linux/reset.h> -+#include <linux/of_device.h> -+#include <linux/of_platform.h> -+#include <linux/property.h> -+#include <dt-bindings/mips/lantiq_rcu_gphy.h> -+ -+#include <lantiq_soc.h> -+ -+#define XRX200_GPHY_FW_ALIGN (16 * 1024) -+ -+struct xway_gphy_priv { -+ struct clk *gphy_clk_gate; -+ struct reset_control *gphy_reset; -+ struct reset_control *gphy_reset2; -+ void __iomem *membase; -+ char *fw_name; -+}; -+ -+struct xway_gphy_match_data { -+ char *fe_firmware_name; -+ char *ge_firmware_name; -+}; -+ -+static const struct xway_gphy_match_data xrx200a1x_gphy_data = { -+ .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin", -+ .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin", -+}; -+ -+static const struct xway_gphy_match_data xrx200a2x_gphy_data = { -+ .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin", -+ .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin", -+}; -+ -+static const struct xway_gphy_match_data xrx300_gphy_data = { -+ .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin", -+ .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin", -+}; -+ -+static const struct of_device_id xway_gphy_match[] = { -+ { .compatible = "lantiq,xrx200-gphy", .data = NULL }, -+ { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data }, -+ { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data }, -+ { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data }, -+ { .compatible = "lantiq,xrx330-gphy", .data = &xrx300_gphy_data }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, xway_gphy_match); -+ -+static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv, -+ dma_addr_t *dev_addr) -+{ -+ const struct firmware *fw; -+ void *fw_addr; -+ dma_addr_t dma_addr; -+ size_t size; -+ int ret; -+ -+ ret = request_firmware(&fw, priv->fw_name, dev); -+ if (ret) { -+ dev_err(dev, "failed to load firmware: %s, error: %i\n", -+ priv->fw_name, ret); -+ return ret; -+ } -+ -+ /* -+ * GPHY cores need the firmware code in a persistent and contiguous -+ * memory area with a 16 kB boundary aligned start address. -+ */ -+ size = fw->size + XRX200_GPHY_FW_ALIGN; -+ -+ fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL); -+ if (fw_addr) { -+ fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); -+ *dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN); -+ memcpy(fw_addr, fw->data, fw->size); -+ } else { -+ dev_err(dev, "failed to alloc firmware memory\n"); -+ ret = -ENOMEM; -+ } -+ -+ release_firmware(fw); -+ -+ return ret; -+} -+ -+static int xway_gphy_of_probe(struct platform_device *pdev, -+ struct xway_gphy_priv *priv) -+{ -+ struct device *dev = &pdev->dev; -+ const struct xway_gphy_match_data *gphy_fw_name_cfg; -+ u32 gphy_mode; -+ int ret; -+ struct resource *res_gphy; -+ -+ gphy_fw_name_cfg = of_device_get_match_data(dev); -+ -+ if (of_device_is_compatible(pdev->dev.of_node, "lantiq,xrx200-gphy")) -+ switch (ltq_soc_type()) { -+ case SOC_TYPE_VR9: -+ gphy_fw_name_cfg = &xrx200a1x_gphy_data; -+ break; -+ case SOC_TYPE_VR9_2: -+ gphy_fw_name_cfg = &xrx200a2x_gphy_data; -+ break; -+ } -+ -+ priv->gphy_clk_gate = devm_clk_get(dev, NULL); -+ if (IS_ERR(priv->gphy_clk_gate)) { -+ dev_err(dev, "Failed to lookup gate clock\n"); -+ return PTR_ERR(priv->gphy_clk_gate); -+ } -+ -+ res_gphy = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ priv->membase = devm_ioremap_resource(dev, res_gphy); -+ if (IS_ERR(priv->membase)) -+ return PTR_ERR(priv->membase); -+ -+ priv->gphy_reset = devm_reset_control_get(dev, "gphy"); -+ if (IS_ERR(priv->gphy_reset)) { -+ if (PTR_ERR(priv->gphy_reset) != -EPROBE_DEFER) -+ dev_err(dev, "Failed to lookup gphy reset\n"); -+ return PTR_ERR(priv->gphy_reset); -+ } -+ -+ priv->gphy_reset2 = devm_reset_control_get_optional(dev, "gphy2"); -+ if (IS_ERR(priv->gphy_reset2)) -+ return PTR_ERR(priv->gphy_reset2); -+ -+ ret = device_property_read_u32(dev, "lantiq,gphy-mode", &gphy_mode); -+ /* Default to GE mode */ -+ if (ret) -+ gphy_mode = GPHY_MODE_GE; -+ -+ switch (gphy_mode) { -+ case GPHY_MODE_FE: -+ priv->fw_name = gphy_fw_name_cfg->fe_firmware_name; -+ break; -+ case GPHY_MODE_GE: -+ priv->fw_name = gphy_fw_name_cfg->ge_firmware_name; -+ break; -+ default: -+ dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static int xway_gphy_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct xway_gphy_priv *priv; -+ dma_addr_t fw_addr = 0; -+ int ret; -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ ret = xway_gphy_of_probe(pdev, priv); -+ if (ret) -+ return ret; -+ -+ ret = clk_prepare_enable(priv->gphy_clk_gate); -+ if (ret) -+ return ret; -+ -+ ret = xway_gphy_load(dev, priv, &fw_addr); -+ if (ret) { -+ clk_disable_unprepare(priv->gphy_clk_gate); -+ return ret; -+ } -+ -+ reset_control_assert(priv->gphy_reset); -+ reset_control_assert(priv->gphy_reset2); -+ -+ iowrite32be(fw_addr, priv->membase); -+ -+ reset_control_deassert(priv->gphy_reset); -+ reset_control_deassert(priv->gphy_reset2); -+ -+ platform_set_drvdata(pdev, priv); -+ -+ return ret; -+} -+ -+static int xway_gphy_remove(struct platform_device *pdev) -+{ -+ struct xway_gphy_priv *priv = platform_get_drvdata(pdev); -+ -+ iowrite32be(0, priv->membase); -+ -+ clk_disable_unprepare(priv->gphy_clk_gate); -+ -+ return 0; -+} -+ -+static struct platform_driver xway_gphy_driver = { -+ .probe = xway_gphy_probe, -+ .remove = xway_gphy_remove, -+ .driver = { -+ .name = "xway-rcu-gphy", -+ .of_match_table = xway_gphy_match, -+ }, -+}; -+ -+module_platform_driver(xway_gphy_driver); -+ -+MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin"); -+MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin"); -+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin"); -+MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin"); -+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin"); -+MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin"); -+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); -+MODULE_DESCRIPTION("Lantiq XWAY GPHY Firmware Loader"); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network index 476cc7eb8f..3122d40c92 100644 --- a/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network @@ -11,65 +11,41 @@ lantiq_setup_interfaces() local board="$1" case "$board" in - alphanetworks,asl56026) - ucidef_add_switch "switch0" \ - "2:lan" "3:lan" "6t@eth0" + alphanetworks,asl56026|\ + arcadyan,vg3503j) + ucidef_set_interface_lan "lan1 lan2" ;; arcadyan,arv7519rw22) - ucidef_add_switch "switch0" \ - "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0" - ;; - arcadyan,vg3503j) - ucidef_add_switch "switch0" \ - "2:lan:2" "4:lan:1" "6t@eth0" + ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5" ;; arcadyan,vgv7510kw22-brn|\ - arcadyan,vgv7510kw22-nor) - ucidef_add_switch "switch0" \ - "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0" - ;; + arcadyan,vgv7510kw22-nor|\ arcadyan,vgv7519-brn|\ arcadyan,vgv7519-nor|\ + bt,homehub-v5a|\ lantiq,easy80920-nand|\ - lantiq,easy80920-nor) - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" + lantiq,easy80920-nor|\ + zyxel,p-2812hnu-f1|\ + zyxel,p-2812hnu-f3) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" ;; avm,fritz3370-rev2-hynix|\ avm,fritz3370-rev2-micron|\ avm,fritz3390|\ avm,fritz7360sl|\ avm,fritz7360-v2|\ - avm,fritz7362sl) - ucidef_add_switch "switch0" \ - "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0" - ;; - avm,fritz7430) - ucidef_add_switch "switch0" \ - "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0" - ;; - bt,homehub-v5a) - ucidef_add_switch "switch0" \ - "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0" - ;; - buffalo,wbmr-300hpd) - ucidef_add_switch "switch0" \ - "5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0" - ;; + avm,fritz7362sl|\ + avm,fritz7430|\ + buffalo,wbmr-300hpd|\ tplink,tdw8970|\ - tplink,tdw8980) - ucidef_add_switch "switch0" \ - "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0" - ;; + tplink,tdw8980|\ tplink,vr200|\ tplink,vr200v) - ucidef_add_switch "switch0" \ - "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0" + ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ;; - zyxel,p-2812hnu-f1|\ - zyxel,p-2812hnu-f3) - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0" + avm,fritz7412|\ + netgear,dm200) + ucidef_set_interface_lan "lan" ;; *) ucidef_set_interface_lan 'eth0' diff --git a/target/linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version b/target/linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version new file mode 100644 index 0000000000..45bef9385b --- /dev/null +++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/05_compat-version @@ -0,0 +1,18 @@ +# +# Copyright (C) 2020 OpenWrt.org +# + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in + *) + ucidef_set_compat_version "1.1" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/lantiq/xrx200/config-5.10 b/target/linux/lantiq/xrx200/config-5.10 index 51d8b6dcdf..d231acda83 100644 --- a/target/linux/lantiq/xrx200/config-5.10 +++ b/target/linux/lantiq/xrx200/config-5.10 @@ -18,6 +18,7 @@ CONFIG_CRYPTO_ZSTD=y CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin" CONFIG_EXTRA_FIRMWARE_DIR="firmware" CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GRO_CELLS=y CONFIG_HWMON=y CONFIG_HW_RANDOM=y CONFIG_ICPLUS_PHY=y @@ -27,7 +28,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_POLLDEV=y CONFIG_INTEL_XWAY_PHY=y # CONFIG_ISDN is not set -CONFIG_LANTIQ_XRX200_LEGACY=y +CONFIG_LANTIQ_XRX200=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_MIPS_MT=y @@ -50,7 +51,12 @@ CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_BLOCK=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_NET_DEVLINK=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_LANTIQ_GSWIP=y +CONFIG_NET_DSA_TAG_GSWIP=y CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_SWITCHDEV=y CONFIG_NLS=y CONFIG_NR_CPUS=2 CONFIG_PADATA=y @@ -77,7 +83,6 @@ CONFIG_SMP=y CONFIG_SMP_UP=y CONFIG_SOC_TYPE_XWAY=y CONFIG_SOC_XWAY=y -CONFIG_SWCONFIG_LEDS=y CONFIG_SYNC_R4K=y CONFIG_SYS_SUPPORTS_SCHED_SMT=y CONFIG_SYS_SUPPORTS_SMP=y @@ -88,7 +93,6 @@ CONFIG_USB=y CONFIG_USB_COMMON=y CONFIG_USB_SUPPORT=y CONFIG_XPS=y -CONFIG_XRX200_PHY_FW=y CONFIG_XXHASH=y CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/lantiq/xrx200/config-5.4 b/target/linux/lantiq/xrx200/config-5.4 index 4782014285..c24b89cb8f 100644 --- a/target/linux/lantiq/xrx200/config-5.4 +++ b/target/linux/lantiq/xrx200/config-5.4 @@ -17,6 +17,7 @@ CONFIG_CRYPTO_ZSTD=y CONFIG_EXTRA_FIRMWARE="lantiq/xrx200_phy11g_a14.bin lantiq/xrx200_phy11g_a22.bin lantiq/xrx200_phy22f_a14.bin lantiq/xrx200_phy22f_a22.bin" CONFIG_EXTRA_FIRMWARE_DIR="firmware" CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GRO_CELLS=y CONFIG_HWMON=y CONFIG_ICPLUS_PHY=y CONFIG_IFX_VPE_EXT=y @@ -25,7 +26,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_POLLDEV=y CONFIG_INTEL_XWAY_PHY=y # CONFIG_ISDN is not set -CONFIG_LANTIQ_XRX200_LEGACY=y +CONFIG_LANTIQ_XRX200=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_MIPS_MT=y @@ -47,7 +48,12 @@ CONFIG_MTD_UBI=y CONFIG_MTD_UBI_BEB_LIMIT=20 CONFIG_MTD_UBI_BLOCK=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_NET_DEVLINK=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_LANTIQ_GSWIP=y +CONFIG_NET_DSA_TAG_GSWIP=y CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_SWITCHDEV=y CONFIG_NLS=y CONFIG_NR_CPUS=2 CONFIG_PADATA=y @@ -56,6 +62,7 @@ CONFIG_PCIEPORTBUS=y CONFIG_PCIE_LANTIQ=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LANTIQ=y +CONFIG_PHYLINK=y CONFIG_PHY_LANTIQ_VRX200_PCIE=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_SUPPLY=y @@ -72,7 +79,6 @@ CONFIG_SENSORS_LTQ_CPUTEMP=y CONFIG_SGL_ALLOC=y CONFIG_SMP=y CONFIG_SMP_UP=y -CONFIG_SWCONFIG_LEDS=y CONFIG_SYNC_R4K=y CONFIG_SYS_SUPPORTS_SCHED_SMT=y CONFIG_SYS_SUPPORTS_SMP=y @@ -83,7 +89,6 @@ CONFIG_USB=y CONFIG_USB_COMMON=y CONFIG_USB_SUPPORT=y CONFIG_XPS=y -CONFIG_XRX200_PHY_FW=y CONFIG_XXHASH=y CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/lantiq/xrx200/target.mk b/target/linux/lantiq/xrx200/target.mk index f7dc8ac1c7..c89f4bb83c 100644 --- a/target/linux/lantiq/xrx200/target.mk +++ b/target/linux/lantiq/xrx200/target.mk @@ -15,8 +15,7 @@ DEFAULT_PACKAGES+=kmod-leds-gpio \ ltq-vdsl-app \ dsl-vrx200-firmware-xdsl-a \ dsl-vrx200-firmware-xdsl-b-patch \ - ppp-mod-pppoa \ - swconfig + ppp-mod-pppoa define Target/Description Lantiq XRX200 diff --git a/target/linux/lantiq/xway/base-files/lib/preinit/05_set_preinit_iface_lantiq b/target/linux/lantiq/xway/base-files/lib/preinit/05_set_preinit_iface_lantiq new file mode 100644 index 0000000000..5f059ee974 --- /dev/null +++ b/target/linux/lantiq/xway/base-files/lib/preinit/05_set_preinit_iface_lantiq @@ -0,0 +1,5 @@ +set_preinit_iface() { + ifname=eth0 +} + +boot_hook_add preinit_main set_preinit_iface diff --git a/target/linux/lantiq/xway/config-5.10 b/target/linux/lantiq/xway/config-5.10 index 0716679aee..cfbf08ab9f 100644 --- a/target/linux/lantiq/xway/config-5.10 +++ b/target/linux/lantiq/xway/config-5.10 @@ -41,6 +41,7 @@ CONFIG_RTL8367_PHY=y CONFIG_SGL_ALLOC=y CONFIG_SOC_TYPE_XWAY=y CONFIG_SOC_XWAY=y +CONFIG_SWCONFIG=y CONFIG_UBIFS_FS=y CONFIG_USB=y CONFIG_USB_COMMON=y diff --git a/target/linux/lantiq/xway/config-5.4 b/target/linux/lantiq/xway/config-5.4 index 3f58576242..42004b0d4d 100644 --- a/target/linux/lantiq/xway/config-5.4 +++ b/target/linux/lantiq/xway/config-5.4 @@ -37,6 +37,7 @@ CONFIG_RTL8366_SMI=y CONFIG_RTL8367B_PHY=y CONFIG_RTL8367_PHY=y CONFIG_SGL_ALLOC=y +CONFIG_SWCONFIG=y CONFIG_UBIFS_FS=y CONFIG_USB=y CONFIG_USB_COMMON=y diff --git a/target/linux/lantiq/xway_legacy/base-files/lib/preinit/05_set_preinit_iface_lantiq b/target/linux/lantiq/xway_legacy/base-files/lib/preinit/05_set_preinit_iface_lantiq new file mode 100644 index 0000000000..5f059ee974 --- /dev/null +++ b/target/linux/lantiq/xway_legacy/base-files/lib/preinit/05_set_preinit_iface_lantiq @@ -0,0 +1,5 @@ +set_preinit_iface() { + ifname=eth0 +} + +boot_hook_add preinit_main set_preinit_iface diff --git a/target/linux/lantiq/xway_legacy/config-5.10 b/target/linux/lantiq/xway_legacy/config-5.10 index 0bc9bda1b8..c24dd77dc0 100644 --- a/target/linux/lantiq/xway_legacy/config-5.10 +++ b/target/linux/lantiq/xway_legacy/config-5.10 @@ -32,6 +32,7 @@ CONFIG_RTL8367_PHY=y CONFIG_SGL_ALLOC=y CONFIG_SOC_TYPE_XWAY=y CONFIG_SOC_XWAY=y +CONFIG_SWCONFIG=y CONFIG_USB=y CONFIG_USB_COMMON=y CONFIG_USB_SUPPORT=y diff --git a/target/linux/lantiq/xway_legacy/config-5.4 b/target/linux/lantiq/xway_legacy/config-5.4 index 4930762160..a44822ee91 100644 --- a/target/linux/lantiq/xway_legacy/config-5.4 +++ b/target/linux/lantiq/xway_legacy/config-5.4 @@ -30,6 +30,7 @@ CONFIG_RTL8366_SMI=y CONFIG_RTL8367B_PHY=y CONFIG_RTL8367_PHY=y CONFIG_SGL_ALLOC=y +CONFIG_SWCONFIG=y CONFIG_USB=y CONFIG_USB_COMMON=y CONFIG_USB_SUPPORT=y |