aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts117
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network4
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches1
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
-rw-r--r--target/linux/ath79/image/generic-ubnt.mk23
5 files changed, 141 insertions, 5 deletions
diff --git a/target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts b/target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts
new file mode 100644
index 0000000000..8e0955e182
--- /dev/null
+++ b/target/linux/ath79/dts/ar9342_ubnt_aircube-ac.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9344.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "ubnt,aircube-ac", "qca,ar9342";
+ model = "Ubiquiti airCube AC";
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x050000 0xf60000>;
+ };
+
+ partition@fb0000 {
+ label = "cfg";
+ reg = <0xfb0000 0x040000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <4>;
+ phy0: ethernet-phy@0 {
+ phy-mode = "rgmii";
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ /* default for ar934x, except for 1000M and 10M */
+ pll-data = <0x06000000 0x00000101 0x00001313>;
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ };
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index ac1fc4406d..103da30379 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -376,6 +376,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
;;
+ ubnt,aircube-ac)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:1" "3:lan:2" "5:lan:3" "4:wan"
+ ;;
ubnt,aircube-isp)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
index 8ec0af53d4..b3e0d0dd31 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
@@ -73,6 +73,7 @@ tplink,wbs510-v1|\
tplink,wbs510-v2)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
;;
+ubnt,aircube-ac|\
ubnt,aircube-isp)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "11"
;;
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 5a38e7f421..23cd4497ba 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -26,6 +26,7 @@ case "$FIRMWARE" in
qxwlan,e1700ac-v2-16m|\
qxwlan,e600gac-v2-8m|\
qxwlan,e600gac-v2-16m|\
+ ubnt,aircube-ac|\
ubnt,unifiac-lite|\
ubnt,unifiac-lr|\
ubnt,unifiac-mesh|\
diff --git a/target/linux/ath79/image/generic-ubnt.mk b/target/linux/ath79/image/generic-ubnt.mk
index c347bd1cf1..710ab54772 100644
--- a/target/linux/ath79/image/generic-ubnt.mk
+++ b/target/linux/ath79/image/generic-ubnt.mk
@@ -110,15 +110,28 @@ define Device/ubnt-xw
UBNT_VERSION := 6.0.4
endef
-define Device/ubnt_aircube-isp
+define Device/ubnt-acb
$(Device/ubnt)
- SOC := qca9533
- DEVICE_MODEL := airCube ISP
IMAGE_SIZE := 15744k
- UBNT_BOARD := ACB-ISP
- UBNT_CHIP := qca9533
+ UBNT_BOARD := ACB
UBNT_TYPE := ACB
UBNT_VERSION := 2.5.0
+endef
+
+define Device/ubnt_aircube-ac
+ $(Device/ubnt-acb)
+ SOC := ar9342
+ DEVICE_MODEL := airCube AC
+ UBNT_CHIP := ar9342
+ DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += ubnt_aircube-ac
+
+define Device/ubnt_aircube-isp
+ $(Device/ubnt-acb)
+ SOC := qca9533
+ DEVICE_MODEL := airCube ISP
+ UBNT_CHIP := qca9533
SUPPORTED_DEVICES += ubnt,acb-isp
endef
TARGET_DEVICES += ubnt_aircube-isp