aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ramips: drop remaining m25p,chunked-io from DTSAdrian Schmutzler2020-08-063-3/+0
| | | | | | | | | | | | | | This option was a spi nor hack which is dropped in commit bcf4a5f474d1 ("ramips: remove chunked-io patch and set spi->max_transfer_size instead") Most of it has already been removed in be2b61e4f1ec ("ramips: drop m25p,chunked-io from dts") It seems all current usages were added after that. Remove them. Cc: Chuanhong Guo <gch981213@gmail.com> Reported-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add common definition netgear_sercomm_norAdrian Schmutzler2020-08-063-27/+24
| | | | | | | | Like NAND-based devices, SPI-NOR based Netgear devices also share a common setup for their images. This creates a common defition for them in image/Makefile, so it can be reused across subtargets. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* procd: update to git HEADDaniel Golle2020-08-063-19/+19
| | | | | | | | | | | 47a9f0d service: add method to query available container features afbaba9 initd: attempt to mount cgroup2 ead60fe jail: use pidns semantics also for timens 759e9f8 jail: make use of BLOBMSG_CAST_INT64 for OCI rlimits 83053b6 instance: add instances into unified cgroup hierarchy 16159bb jail: parse OCI cgroups resources Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libubox: update to git HEADDaniel Golle2020-08-061-3/+3
| | | | | | 9e52171 blobmsg: introduce BLOBMSG_CAST_INT64 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* glibc: update to latest 2.31 commit [BZ #19519 BZ #26332 BZ #26248]Hans Dedecker2020-08-061-2/+2
| | | | | | | | | | 6fdf971c9d Add NEWS entry for CVE-2016-10228 (bug 19519) 70d585151c Rewrite iconv option parsing [BZ #19519] 1c8efe848b powerpc: Fix incorrect cache line size load in memset (bug 26332) 7611339a9b nptl: Zero-extend arguments to SETXID syscalls [BZ #26248] 21b760cc2f Disable warnings due to deprecated libselinux symbols used by nss and nscd Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: tidy up MAC address setup for Linkit Smart and Omega2Adrian Schmutzler2020-08-063-8/+2
| | | | | | | | | | | | | | | | | | | | Linkit Smart 7688 and Onion Omega 2(+) are one-port devices, and have their port set to LAN by default. Setting up a WAN MAC address for them doesn't make any sense, as no wan interface will be created in uci config. Despite, these devices also set lan_mac in 02_network, although mtd-mac-address sets a different address for the ethernet interface in DTS. Clean this up by moving the lan_mac value into DTS and dropping the entries in 02_network completely. That way, the effective address on the LAN interface should stay the same, but we get rid of the extra (re)assignments. As I don't have access to the devices, this does not tell anything about whether 0x2e is actually a good choice, it just preserves the existing assignment. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: WizFi630S use macs from factory partionTobias Welz2020-08-062-3/+6
| | | | | | | | | | | | | | | | | | | | WIZnet WizFi630s has three mac addresses in the factory partition: 0x04 (also on the label), 0x28 for wan mac and 0x2e as lan mac. All three macadresses are sequential series of addresses. This is making use of them. While at it, also add the label MAC address to 02_network. MAC addresses as verified by OEM firmware: use interface source WLAN ra0 factory 0x04 (label) WAN eth0.2 factory 0x28 (label + 1) LAN eth0.1 factory 0x2e (label + 2) Signed-off-by: Tobias Welz <tw@wiznet.eu> [fix sorting in 02_network, commit message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: correct WizFi630S pin mappingsTobias Welz2020-08-061-26/+8
| | | | | | | | | | WizFi630S had some pins changed in the release version of the board. The run led, wps button and a slide switch where affected. This patch is correcting this. i2c is removed as it is sharing a pin with the run (system) led. uart2 is enabled as it is also enabled in the OEM firmware. Signed-off-by: Tobias Welz <tw@wiznet.eu>
* build: set up host command for egrepFelix Fietkau2020-08-061-0/+4
| | | | | | It is used for the kernel build and uses GNU specific features Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipq40xx: refresh kernel 5.4 configAdrian Schmutzler2020-08-061-11/+3
| | | | | | | | | | | Refresh config with make kernel_oldconfig. After d1a8217d87bf ("kernel: clean-up build-configurable kernel config symbols"), the routine wants to add an additional CONFIG_CGROUPS (=n), which has been removed manually again, as this seems unintended. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: merge performance improvement patchesFelix Fietkau2020-08-063-0/+260
| | | | | | | Fix fq_codel performance issues Add a new rx function for batch processing Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: fix mt7622-rfb1 board supportFelix Fietkau2020-08-066-60/+67
| | | | | | | Make GPIO keys active-low. Add DSA support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix AQL issuesFelix Fietkau2020-08-062-0/+112
| | | | | | | - Remove bogus STA txq pending airtime underflow warning - Improve tx airtime estimation for A-MPDU traffic Signed-off-by: Felix Fietkau <nbd@nbd.name>
* binutils: update to version 2.34Felix Fietkau2020-08-063-1329/+19
| | | | | | Fixes perf on aarch64 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to 2020-07-22Felix Fietkau2020-08-061-5/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 7bc58ca2b375 mt76: add missing lock configuring coverage class 43febd452110 mt76: mt7615: fix lmac queue debugsfs entry 0b9975254694 mt76: mt7615: fix hw queue mapping 4058595e146e mt76: overwrite qid for non-bufferable mgmt frames 49c7131dd0c5 mt76: mt76x02: do not access uninitialized NAPI structs f185d90ec51c update mt7915 firmware to the latest version 0ed6a335ebc2 mt76: mt7615: re-enable offloading of sequence number assignment 2a52eabbddc5 mt76: usb: rely on mt76_for_each_q_rx 90fc1d8614e1 mt76: mt7663: introduce ARP filter offload b57223dd01b9 mt76: mt7615: fix up typo in Kconfig for MT7663U ec4057d685c0 mt76: add script for generating single-sku device tree data 769b030de636 mt76: add functions for parsing rate power limits from DT 1d2aedb248d0 mt76: extend DT rate power limits to support 11ax devices a3e17ff8e624 mt76: mt7615: implement support for using DT rate power limits a48a4ae32d48 mt76: allow more channels, allowed in ETSI domain 869ba618ef54 mt76: fix include in pci.h b1ddec840aa4 mt76: rely on register macros d6d9a7ea428d mt76: add U-APSD support on AP side ee13b78367db mt76: mt7615: fix EEPROM buffer size 82a94173b162 mt76: mt7915: add missing CONFIG_MAC80211_DEBUGFS c0dbbd930d32 mt76: mt7615: add .set_tsf callback 84d54df76996 mt76: mt7915: add a fixed AC queue mapping dacc2d29672d mt76: mt7915: add MU-MIMO support 1ce4660a0ea3 mt76: mt7915: use ieee80211_tx_queue_params to avoid open coded 53891242a682 mt76: mt7915: add support for DT rate power limits b3a4d78914f6 mt76: mt7915: rework the flow of txpower setting c6ea163c019b mt76: mt7915: directly read per-rate tx power from registers 8ae83adc73a8 mt76: mt7915: overwrite qid for non-bufferable mgmt frames 740b0bfdf279 mt76: mt76x2e: rename routines in pci.c b5eee1b52234 mt76: mt7615: schedule tx tasklet and sta poll on mac tx free 72f34107248e mt76: mt7615: add support for accessing mapped registers via bus ops 46bc8a0b5347 mt76: mt7615: add support for accessing RF registers via MCU 882cec420609 mt76: mt7615: use full on-chip memory address for WF_PHY registers b1ddb8e35ca2 mt76: vif_mask to struct mt76_phy 3a1ea7287eb2 mt76: add API for testmode support d7467bc018e5 mt76: mt7615: implement testmode support 3ea5da1639fe add utility for using testmode support 6789a2db7246 mt7615: fix getting wideband RSSI in test mode 7941217ffe46 mt76: mt7915: remove unused parameters in mt7915_puts_rate_txpower() 13ab1d648684 mt76: mt7915: update HE capabilities 3f0e66dc25de mt76: mt76x2: fix pci suspend/resume on mt7612e c605f2b6940b mt76: mt76x2u: enable HC-M7662BU1 ca2b797ee52d mt76: mt7915: avoid memcpy in rxv operation dad3f93e8f6a mt76: mt7615: avoid polling in fw_own for mt7663 ec303bfad299 mt76: move mt76 workqueue in common code 0bf82270568a mt76: mt7615: add mt7615_pm_wake utility routine 091e9b5df6af mt76: mt7615: introduce mt7615_mutex_{acquire,release} utilities e3850966d74c mt76: mt7615: wake device before accessing regmap in debugfs e6dcb71d7992 mt76: mt7615: wake device before configuring hw keys 050f8cd9cbe7 mt76: mt7615: introduce pm_power_save delayed work 56779a6c7dec mt76: mt7615: wake device in mt7615_update_channel before access regmap b0bcdd66ccaa mt76: mt7615: acquire driver_own before configuring device for suspend 58369fdce235 mt76: mt7615: wake device before performing freq scan 2c188db1f7c7 mt76: mt7615: add missing lock in mt7615_regd_notifier 6fdb20a025eb mt76: mt7615: run mt7615_mcu_set_wmm holding mt76 mutex 36a789c00e4f mt76: mt7615: run mt7615_mcu_set_roc holding mt76 mutex b8cdce45c131 mt76: mt7615: wake device before pulling packets from mac80211 queues 82e8e0525d6c mt76: mt7615: wake device before pushing frames in mt7615_tx 65ccc40c14e1 mt76: mt7615: run mt7615_pm_wake in mt7615_mac_sta_{add,remove} 2107caf92e71 mt76: mt7615: check MT76_STATE_PM flag before accessing the device 28a2f5fa6eed mt76: mt7615: do not request {driver,fw}_own if already granted 94519eac69c3 mt76: mt7615: add runtime-pm knob in mt7615 debugfs ccc90dafea66 mt76: mt7615: enable beacon hw filter for runtime-pm 29f2bebe1a1e mt76: mt7615: add idle-timeout knob in mt7615 debugfs 58057d1f232b mt76: mt7615: improve mt7615_driver_own reliability a873b7c8e3de mt76: mt7663u: sync probe sampling with rate configuration b469c59c616c mt76: mt7615: avoid scheduling runtime-pm during hw scan f1ff52acb6a7 mt76: mt7615: reschedule ps work according to last activity 1f670a534451 mt76: mt7663u: fix memory leak in set key afff00ad2b60 mt76: mt7663u: fix potential memory leak in mcu message handler 4c9309f47ddf mt76: mt7615: fix potential memory leak in mcu message handler 379445b4aa7f mt76: mt7915: potential array overflow in mt7915_mcu_tx_rate_report() 750797b61ba8 mt76: fix copy&paste error in mt76_testmode_cmd f9a7a2f7dbc2 testmode: fix setting tx_power 1641aa201682 mt76: mt7615: fix mt7615_mcu_set_test_param set non-bool parameters 6838d002f9de mt76: mt7615: fix tx_frames setup 8c0a25d6a38c mt76: mt7615: take into account sdio bus configuring txwi c0cbef79eb45 mt76: mt76u: add mt76_skb_adjust_pad utility routine 98412356c959 mt76: mt7615: sdio code must access rate/key regs in preocess context fa16627d7e3a mt76: mt7615: introduce mt7663-usb-sdio-common module bf88e70c7a68 mt76: introduce mt76_sdio module aa97be8e02de mt76: mt7615: introduce mt7663s support 1eb8b7d689a3 mt76: testmode: fix tx_done accounting on enqueue failures 632ce698e8ee mt76: mt7615: fix antenna settings for test mode 4d2f622190b6 mt76: mt76s: move queue accounting in mt76s_tx_queue_skb 9a3723c8febc mt76: mt7915: fix potential memory leak in mcu message handler 88fa973f59c2 mt76: mt7615: fix possible memory leak in mt7615_mcu_wtbl_sta_add 2fff7d77befd mt76: mt76u: add missing release on skb in __mt76x02u_mcu_send_msg b5df0fbb1847 mt7615: update firmware to version 20200629 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: unify CONFIG_GPIO_SYSFS in kernel configsFelix Fietkau2020-08-0667-67/+3
| | | | | | Enable it for all platforms Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: make prefix mapping of debug information optionalFelix Fietkau2020-08-062-1/+10
| | | | | | | | | | | | | | Remapping the local build path in debug information makes debugging using ./scripts/remote-gdb harder, because files no longer refer to the full path on the build host. For local builds, debug information does not need to be reproducible, since it will be stripped out of packages anyway. For buildbot builds, it makes sense to keep debug information reproducible, since the full path is not needed (nor desired) anywhere. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: make cfg80211 testmode support optional (and disabled by default)Felix Fietkau2020-08-061-1/+16
| | | | | | | Testmode commands are typically only used for manufacturing or vendor specific debugging features, so they should not be in the default image Signed-off-by: Felix Fietkau <nbd@nbd.name>
* openvpn: fix arguments passing to wrapped up and down scriptsJo-Philipp Wich2020-08-062-2/+3
| | | | | | | | | | | | | With the introduction of the generic OpenVPN hotplug mechanism, wrapped --up and --down scripts got the wrong amount and order of arguments passed, breaking existing configurations and functionality. Fix this issue by passing the same amount of arguments in the same expected order as if the scripts were executed by the OpenVPN daemon directly. Ref: https://github.com/openwrt/openwrt/pull/1596#issuecomment-668935156 Fixes: 8fe9940db6 ("openvpn: add generic hotplug mechanism") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* add vfconfigJo-Philipp Wich2020-08-064-0/+292
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* dsaconfig: introduce package for UCI configuration of VLAN filter rulesJo-Philipp Wich2020-08-064-0/+364
| | | | | | | | | | | | | | This package provides the necessary files to translate `config dsa_vlan` and `config dsa_port` sections of `/etc/config/network` into appropriate bridge vlan filter rules. The approach of the configuration is to bridge all DSA ports into a logical bridge device, called "switch0" by default, and to set VLAN port membership, tagging state and PVID as specified by UCI on each port and on the switch bridge device itself, allowing logical interfaces to reference port VLAN groups by using "switch0.N" as ifname, where N denotes the VLAN ID. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ramips: switch rt305x subtarget to kernel 5.4Alexey Dobrovolsky2020-08-056-6/+5
| | | | | | | | | | | | | | RT3x5x seems to work fine with kernel 5.4. Set the default kernel version to 5.4 to bring this to a broader audience. Since 4 of 6 targets are on kernel 5.4 now, invert the kernel version setup logic in Makefile/target.mk files. Tested on ZyXEL Keenetic. Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> [invert version setup logic] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: enable flashing WizFi630S via OEM firmwareTobias Welz2020-08-051-0/+1
| | | | | | | | | | | WIZnet WizFi630s board name is written slightly different it its OEM OpenWrt firmware. This causes an incompatibility warning during flashing with sysupgrade. This patch is adding the vendor board name to the supported devices list to avoid this warning. For initial flashing you can use sysupgrade via command line or luci beside of TFTP. Do not keep the OEM configuration during sysupgrade. Signed-off-by: Tobias Welz <tw@wiznet.eu>
* ipq806x: use qcom-ipq8064-v1.0.dtsi from upstreamAdrian Schmutzler2020-08-058-222/+186
| | | | | | | | | | | | | | | | | This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches instead of keeping a local version. As a consequence: - we use a part of the shared definitions there and update device DTS files accordingly - we move additional stuff from our local v1.0.dtsi to the patch - we drop partitions, LEDs and keys from the file as we will implement them differently anyway Like with the previous patch, this follows the idea that a diff from upstream might be easier to handle than a big file of our own with different distribution pattern of properties. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: use qcom-ipq8064.dtsi from upstreamAdrian Schmutzler2020-08-058-1579/+1164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Though a qcom-ipq8064.dtsi file exists upstream, we still do overwrite it with a full version of our own in the ipq806x target. About half of the contents of our file are upstream content, the other half are local improvements. To prevent us from having a lot of code maintained twice in parallel, this adjusts the target to use the upstream qcom-ipq8064.dtsi. Our local changes are arranged into three patches, the first pulling a commit from upstream, the second doing a few small adjustments, and the third adding all additional stuff. This should get us the best of both worlds. The property "ports-implemented" on sata@29000000 is moved to 2nd-level DTSI files as kernel defines it there as well. While at, rename 080-ARM-dts-qcom-add-gpio-ranges-property.patch to include the kernel version where it's added upstream. Even though this might look more complicated in the first place, the aim is to bring our files closer to upstream, so we can benefit from changes directly and vice-versa. After all, this drop about 650 lines just copied from the upstream DTSI file. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uhttpd: update to the latest masterRafał Miłecki2020-08-051-3/+3
| | | | | | | | | | 212f836 ubus: rename JSON-RPC format related functions 628341f ubus: use local "blob_buf" in uh_ubus_handle_request_object() 9d663e7 ubus: use BLOBMSG_TYPE_UNSPEC for "params" JSON attribute 77d345e ubus: drop unused "obj" arguments 8d9e1fc ubus: parse "call" method params only for relevant call Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: remove doublet entry in WizFi630S dts fileTobias Welz2020-08-051-4/+0
| | | | | | | &wmac entry in WIZnet WizFi630S dts file was existing two times. This is removing one of them. Signed-off-by: Tobias Welz <tw@wiznet.eu>
* ramips: disable unused phy ports of WizFi630STobias Welz2020-08-051-0/+1
| | | | | | | WIZnet WizFi630S is using only 3 of the phy ports. The unused phy ports draw unnecessarily power. This is disabling the unused phy ports. Signed-off-by: Tobias Welz <tw@wiznet.eu>
* bcm47xx: switch to kernel 5.4Rafał Miłecki2020-08-041-1/+1
| | | | | | Switch, LEDs, USB, buttons, sysupgrade testedon BCM4706. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* scripts: remove checkpatch.shPetr Štetiar2020-08-041-3/+0
| | | | | | | | That file was added accidentally in v3 of the patch and I haven't properly reviewed that patch before pushing it. Fixes: 656b562aff36 ("scripts: Add Buildbot dump-target-info.pl script") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* bcm53xx: switch to kernel 5.4Rafał Miłecki2020-08-041-1/+1
| | | | | | Switch, USB, WiFi, buttons tested on BCM47094. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: set HW_RANDOM_BCM2835=yRafał Miłecki2020-08-041-0/+2
| | | | | | | | | | This enables Random Number Generator support on Northstar (described in DT with brcm,bcm5301x-rng). It's also a workaround for OpenWrt bug with kernel config causing: Broadcom BCM2835/BCM63xx Random Number Generator support (HW_RANDOM_BCM2835) [Y/n/m/?] (NEW) Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: update kernel 5.4 DTS to upstream 5.9 stateRafał Miłecki2020-08-043-0/+333
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: update kernel 5.4 configRafał Miłecki2020-08-041-100/+4
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* scripts: Add Buildbot dump-target-info.pl scriptPaul Spooren2020-08-042-0/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The script comes from buildbot.git[0] and is used to print available targets and architectures, which are then build. As the buildbot clones openwrt.git anyway, the script might as well live here to be used for other cases as well, e.g. determining what architectures are available when building Docker containers or show developers an overview which architectures are used by which target. It's called with either the parameter `architectures` or `targets`, showing architectures followed by supported targets or targets, followed by the supported architectures: $ ./scripts/dump-target-info.pl architectures aarch64_cortex-a53 bcm27xx/bcm2710 mediatek/mt7622 mvebu/cortexa53 sunxi/cortexa53 aarch64_cortex-a72 bcm27xx/bcm2711 mvebu/cortexa72 ... $ ./scripts/dump-target-info.pl targets apm821xx/nand powerpc_464fp apm821xx/sata powerpc_464fp ... In the future the the script could be removed from the buildbot repository and maintained only here. Rename `dumpinfo.pl` to `dump-target-info.pl` to improve verbosity of filename. [0]: https://git.openwrt.org/?p=buildbot.git;a=blob;f=scripts/dumpinfo.pl;h=aa97f8d60379076a41b968402e9337cea824ece5;hb=HEAD Signed-off-by: Paul Spooren <mail@aparcar.org>
* ramips: add support for TP-Link RE200 v3Richard Fröhning2020-08-035-0/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE200 v3 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN like the v2. Specifications -------------- - MediaTek MT7628AN (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - 8x LED (GPIO-controlled), 2x button Unverified: - UART header on PCB (57600 8n1) There are 2.4G and 5G LEDs in red and green which are controlled separately. MAC addresses ------------- MAC address assignment has been done according to the RE200 v2. The label MAC address matches the OpenWrt ethernet address. Installation ------------ Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. Simply flash the -factory.bin from OEM. In contrast to a stock firmware, this will not overwrite U-Boot. Recovery -------- Unfortunately, this devices does not offer a recovery mode or a tftp installation method. If the web interface upgrade fails, you have to open your device and attach serial console. The device has not been opened for adding support. However, it is expected that the behavior is similar to the RE200 v2. Instructions for serial console and recovery may be checked out in commit 6d6f36ae787c ("ramips: add support for TP-Link RE200 v2") or on the device's Wiki page. Signed-off-by: Richard Fröhning <misanthropos@gmx.de> [adjust commit title/message, sort support list] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* wireguard: bump to 1.0.20200729Jason A. Donenfeld2020-08-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | * compat: rhel 8.3 beta removed nf_nat_core.h * compat: ipv6_dst_lookup_flow was ported to rhel 7.9 beta This compat tag adds support for RHEL 8.3 beta and RHEL 7.9 beta, in addition to RHEL 8.2 and RHEL 7.8. It also marks the first time that <https://www.wireguard.com/build-status/> is all green for all RHEL kernels. After quite a bit of trickery, we've finally got the RHEL kernels building automatically. * compat: allow override of depmod basedir When building in an environment with a different modules install path, it's not possible to override the depmod basedir flag by setting the DEPMODBASEDIR environment variable. * compat: add missing headers for ip_tunnel_parse_protocol This fixes compilation with some unusual configurations. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* ramips: fix/tidy up 4M tplink-v2-image flash layoutsAdrian Schmutzler2020-08-032-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | For the TP-Link 4M devices with tplink-v2-image recipe (mktplinkfw2.c), there are two different flash layouts based on the size of the (u)boot partition: device uboot OEM firmware OpenWrt (incl. config) tl-wr840n-v5 0x20000 0x3c0000 0x3d0000 tl-wr841n-v14 0x10000 0x3d0000 0x3e0000 In both cases, the 0x10000 config partition is used for the firmware partition as well due to the limited space available and since it's recreated by the OEM firmware anyway. However, the TFTP flashing process will only copy data up to the size of the initial (OEM) firmware size. Therefore, while we can use the bigger partition to have additional erase blocks on the device, we have to limit the image sizes to the TFTP limits. So far, only one layout definition has been set up in mktplinkfw2.c for 4M mediatek devices. This adds a second one and assigns them to the devices so the image sizes are correctly restrained. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kirkwood: get rid of BOARD_NAME and tidy up DEVICE_DTSAdrian Schmutzler2020-08-031-16/+14
| | | | | | | | | | | Since most of the DTS file names follow a common scheme now, let's update the automatically generated DEVICE_DTS value and get rid of some DEVICE_DTS and all BOARD_NAME entries for individual devices. This should specifically make the job easier for developers adding new devices, as they are not tempted to copy over BOARD_NAME anymore. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* toolchain/binutils: remove versions 2.29.1 and 2.31.1Adrian Schmutzler2020-08-0312-496/+0
| | | | | | | | We currently support four versions of binutils in parallel. Let's just keep the latest two and drop the older ones before the next one comes around. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* package: replace remaining occurrences of ifconfig with ipAdrian Schmutzler2020-08-032-4/+4
| | | | | | | | ifconfig is effectively deprecated for quite some time now. Let's replace the remaining occurrences for packages by the corresponding ip commands now. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* target: replace remaining occurrences of ifconfig with ipAdrian Schmutzler2020-08-035-8/+9
| | | | | | | | | | | ifconfig is effectively deprecated for quite some time now. Let's replace the remaining occurrences for our target setup by the corresponding ip commands now. Note that this does not touch ar71xx, as it will be dropped anyway, and changing it would only make backports harder. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: image: return sizes if check-size failsAdrian Schmutzler2020-08-031-2/+4
| | | | | | | | | | | | | Instead of just printing a warning that an image is too big, also print both actual size and limit in the string: WARNING: Image file somename.bin is too big: 2096101 > 1048576 Since the kernel size is checked via the same function (if KERNEL_SIZE is specified), this will also apply to the kernel image size check. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: restore support for boot console with arbitrary baud ratesSungbo Eo2020-08-021-0/+54
| | | | | | | | | | | Commit 1bfbf2de6df9 ("ar71xx: serial: core: add support for boot console with arbitrary baud rates") added support for arbitrary baud rates which enabled 250000 baud rate for Yun. But the patch was not ported to kernel 4.9, and since then the kernel set its baud rate to 9600. This commit ports the patch to kernel 4.14, thereby restoring the serial console of Yun. Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ar71xx: enable ethernet LED of Arduino YunSungbo Eo2020-08-021-2/+1
| | | | | | | | Commit 05d73a2a7379 enabled GPIO on ethernet LED, but proper LED setup was not added then. This commit fixes it by reverting the change on the LED. Fixes: 05d73a2a7379 ("ar71xx: Arduino Yun board 'WLAN RST' button support") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ar71xx: fix sysupgrade for Arduino YunSungbo Eo2020-08-021-1/+1
| | | | | | | | | Commit bb46b635df48 changed its partition scheme, but sysupgrade image validation still uses the old format. This commit fixes it so that force flag is not needed for sysupgrade. Fixes: bb46b635df48 ("ar71xx: move Arduino Yun to generic building code") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* Revert "ar71xx: fix Arduino Yun enabling of level shifters outputs"Sungbo Eo2020-08-021-2/+2
| | | | | | | | | This reverts commit 077253dd666a30ae5231c3748222d4b5b138593d. The output enable pins should be disabled by default, and only enabled when used. Otherwise unwanted conflicts might occur between MCU and SoC pins. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* build: image: drop unused check-kernel-size recipeAdrian Schmutzler2020-08-021-7/+0
| | | | | | | | | | The recipe check-kernel-size is not used in the entire tree. Instead, we already check the size of the kernel image in Device/Build/kernel in image.mk via check-size function if KERNEL_SIZE is defined. Therefore, drop the function. Using it would be redundant anyway. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* LICENSE: use updated GNU copyPaul Spooren2020-08-021-21/+20
| | | | | | | | | | | | | | The current LICENSE file contains some form feed (FF) characters instead of recently popular line feed (LF) characters. Also update to the latest address of the Free Software Foundation. Lastly center some captions, as suggested by the official GNU LICENSE distribution[0]. Historical changes of GPL-2.0 LICENSE file are availalbe[1]. [0]: https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt [1]: https://github.com/pombredanne/gpl-history Signed-off-by: Paul Spooren <mail@aparcar.org>
* scripts/checkpatch.pl: fix README.md file name after renameAdrian Schmutzler2020-08-021-1/+1
| | | | | | | | | | | | | checkpatch.pl uses a list of files to detect the root OpenWrt directory. This includes README, which has been renamed to README.md in the previous commit. Update the file name in checkpatch.pl to prevent errors like the following when running the script: Must be run from the top-level dir. of a OpenWrt tree Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 12:14:06 +0000