aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: dts: move partitions into partition nodeMathias Kresin2019-07-074-88/+103
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: add missing size and address cellsMathias Kresin2019-07-074-0/+8
| | | | | | | | | | Add size and address cells where missing to fix the following devicetree compiler warning: Warning (avoid_default_addr_size): Relying on default #address-cells value Warning (avoid_default_addr_size): Relying on default #size-cells value Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: fix size cellsMathias Kresin2019-07-0711-11/+11
| | | | | | SPI nodes only need an address and no size. Drop the size everywhere. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: fix malformed unit addressesMathias Kresin2019-07-071-1/+1
| | | | | | | | Fixes: Warning (unit_address_format): unit name should not have leading "0x" Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: drop superfluous unit addressMathias Kresin2019-07-0720-68/+48
| | | | | | | | | | | | | The cpu temperature driver has the register offset hardcode and doesn't need a reg. The mdio bus node is only used as a well known name and doesn't need a reg or unit address. syscon-reboot doesn't have a unit address or a reg either. The unit name collides with reset-controller@10 anyway. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: add reg if unit address is setMathias Kresin2019-07-075-0/+29
| | | | | | | | | Add the reg property if the node has an unit address. Fixes the following device tree compiler warning: Warning (unit_address_vs_reg): node has a unit name, but no reg property Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: move memory node to board dtsMathias Kresin2019-07-0747-16/+43
| | | | | | | The memory node is highly board specific and should be only defined in the board dts. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: convert DEVICE_TITLE to new variablesDaniel Golle2019-07-066-323/+704
| | | | | | Also unify naming and add details where they were missing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: Add DEVICE_VENDOR for Ubiquiti RouterstationAdrian Schmutzler2019-07-051-0/+1
| | | | | | | | This has been overlooked. Reported by: Chen Minqiang (@ptpt52) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* iproute2: update to 5.1.0Deng Qingfang2019-07-046-166/+64
| | | | | | | | Update iproute2 to 5.1.0 Remove upstream patch 010-cake-fwmark.patch Backport a patch to fix struct sysinfo redefinition error Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
* mt76: update to the latest versionFelix Fietkau2019-07-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | 6cafaca mt7603: use READ_ONCE instead of ACCESS_ONCE 9e2e0b8 mt76: round up length on mt76_wr_copy e378ef1 mt76: mt7615: fix sparse warnings: warning: restricted __le16 degrades to integer 7991dd7 mt76: mt7615: introduce mt7615_regd_notifier 901a4c7 mt76: mt7615: add hw dfs pattern detector support 57c600e mt76: mt7615: do not perform txcalibration before cac is complited 6afc952 mt76: mt7615: add csa support 8919516 mt76: mt7615: add radar pattern test knob to debugfs 3be723c mt76: mt7615: clean up FWDL TXQ during/after firmware upload 47fe37e mt76: mt7615: fall back to sw encryption for unsupported ciphers bc5e041 mt76: mt7603: enable hardware rate up/down selection ae760db mt76: mt7615: move mt7615_mcu_set_rates to mac.c 2ae01f7 mt76: mt7615: reset rate index/counters on rate table update 6f98378 mt76: mt7615: sync with mt7603 rate control changes edbe88e mt76: usb: fix endian in mt76u_copy f43b622 mt76: usb: remove unneeded {put,get}_unaligned 5e1e5b7 mt76: usb: use full intermediate buffer in mt76u_copy 017d0ff mt76: mt76u: fix typo in mt76u_fill_rx_sg 2c0ccf1 mt76: mt7615: always release sem in mt7615_load_patch 0c6f1a2 mt76: mt7615: introduce mt7615_mcu_send_ram_firmware routine 3dfc1ee mt76: mt7615: fix sparse warnings: incorrect type in assignment (different base types) 9475320 mt76: mt7603: fix sparse warnings: warning: incorrect type in assignment (different base types) e07451d mt76: mt7615: fix sparse warnings: warning: cast from restricted __le16 b973bef mt7603: do not use tssi-off power value for mt7628 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: Correctly use DEVICE_VARIANT for NETGEAR WNDR3700Adrian Schmutzler2019-07-041-1/+3
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: Move DEVICE_VENDOR for NETGEAR to parent definitionAdrian Schmutzler2019-07-043-6/+1
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: split DEVICE_TITLE in multiple variablesPaul Spooren2019-07-049-142/+280
| | | | | | | | | | | | | | This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT. All three are merged together to look the same as the current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as a *fallback* for devices which weren't upgraded yet. This is based on the work of @sudhanshu16. The motivation is to create JSON files based on provided metadata, needing clear differentiation between vendor, model and revision. Signed-off-by: Paul Spooren <mail@aparcar.org>
* lantiq: drop kernel 4.14 supportMathias Kresin2019-07-0434-14836/+0
| | | | | | | The current state of the kernel 4.14 support is in the openwrt-19.07 branch. No need to keep a not default used kernel in this branch. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: switch to kernel 4.19Martin Blumenstingl2019-07-041-1/+1
| | | | | | Use kernel 4.19 by default. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* lantiq: 4.19: fix panic when using the DMA APIMartin Blumenstingl2019-07-045-32/+127
| | | | | | | | | | | With kernel 4.19 the DMA API relies on a struct device to work properly. Backport upstream patches which passed a struct device instead of NULL to the DMA API. Fixes kernel panics during boot. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: 4.19: load PCIe driver after PCI driverMathias Kresin2019-07-041-4/+29
| | | | | | | | | | | | | | | | | | | | | | | | | In case a PCI device is physical present, the Lantiq PCI driver need to be loaded prior to the Lantiq PCIe driver. Otherwise none of them will work because updating the BAR 0 of a device attached to the PCIe Bus will fail. Till kernel commit 9667bb039bf6 ("MIPS: lantiq: remove unnecessary of_platform_default_populate call"), the Lantiq PCI driver was probed early in the boot process via plat_of_setup(). Since the mentioned commit, both drivers are probed via of_platform_default_populate_init() and they are probed according to their order in the devicetree source file. If the Lantiq PCI driver is enabled in the devicetree, defer the probing og the Lantiq PCIe driver till the Lantiq PCI driver is probed. Use the presence of a PCU bus as indicater for a loaded Lantiq PCI driver. This way we don't need to shuffle the PCI/PCIe nodes in the devicetree source file, as they are already (correctly) ordered based on the unit address. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: 4.19: increase usb reset timeoutsMartin Blumenstingl2019-07-042-0/+64
| | | | | | | | | | | With kernel 4.19 dwc2 would not want to initialize due to reset timeouts, while it worked fine with 4.14. Increase the reset timeouts to 1 second, as it was used by the old lantiq ifxhcd usb driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: make patches applyHauke Mehrtens2019-07-0422-282/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | The following patches are dropped because they are now upstreamed: - 0002-gpio-stp-xway-Implement-get-callback.patch upstreamed with commit 5b9b2b5284f819 ("gpio: stp-xway: Implement get callback") - 0027-01-net-phy-intel-xway-add-VR9-version-number.patch upstreamed with commit 5b73d9955fb4b0 ("net: phy: intel-xway: add VR9 version number") - 0027-02-net-phy-intel-xway-add-VR9-v1.1-phy-ids.patch upstreamed with commit f452518c982e57 ("net: phy: intel-xway: add VR9 v1.1 phy ids") The following patches were updated: - 0018-MTD-nand-lots-of-xrx200-fixes.patch the mainline driver now resides in drivers/mtd/nand/raw/xway_nand.c (instead of drivers/mtd/nand/xway_nand.c) - 0025-NET-MIPS-lantiq-adds-xrx200-net.patch the DMA API now requires a valid device to be passed to all operations - 0028-NET-lantiq-various-etop-fixes.patch the DMA API now requires a valid device to be passed to all operations Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: copy target to kernel 4.19Hauke Mehrtens2019-07-04116-0/+14836
| | | | | | | | This just copies the files from the kernel 4.14 specific folders into the kernel 4.19 specific folder, no changes are done to the files in this commit. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: ltq-tapi: fix compatibility with Linux 4.15+Martin Blumenstingl2019-07-041-0/+48
| | | | | | | | | | | | | Linux 4.15 removes the init_timer() API. It's replaced by two functions: - timer_setup() is used instead of init_timer() and also replaces the timer "function" (callback) setup. - from_timer() has to be used to obtain the use-case specific data from a struct timer_list, which is now passed to the timer callback. Update the timer API to be compatible with Linux 4.15+ so it compiles with the upcoming Linux 4.19 kernel update. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* build: skip kernel stack validation when building on macOSFelix Fietkau2019-07-031-0/+4
| | | | | | | | | | Since we switched to 4.19, the kernel build checks for libelf to decide if it should build tools for stack validation. On macOS, this check fails during target/compile, but succeeds during package build (because of the pkg-config path picking up target libraries). Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: enable STP where referencedMathias Kresin2019-07-032-0/+2
| | | | | | | | | | | While moving common used parts to dtsi files, the was disabled by default but not enabled for all boards using the STP. Fixes: f519fea4c6db ("lantiq: kernel 4.14: cleanup dts files") Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Mathias Kresin <dev@kresin.me> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* openvpn: fix handling of list optionsMatt Merhar2019-07-032-3/+4
| | | | | | | | | | | | | | This addresses an issue where the list option specified in /etc/config/openvpn i.e. 'tls_cipher' would instead show up in the generated openvpn-<name>.conf as 'ncp-ciphers'. For context, 'ncp_ciphers' appears after 'tls_cipher' in OPENVPN_LIST from openvpn.options. Also, the ordering of the options in the UCI config file is now preserved when generating the OpenVPN config. The two currently supported list options deal with cipher preferences. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
* comgt: add delay option for 3g protoFlorian Eckert2019-07-031-0/+4
| | | | | | | All protos for wwan (ncm,qmi,mbim) do have a delay option. To standardize that add also the missing delay option to the 3g proto. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* base-files: supress service restart of umountKarel Kočí2019-07-031-0/+5
| | | | | | | | | Restart is in default implemented so it calls stop and start. This is pretty unsafe to call on umount service. This service should not do anything on restart the same way as on start. Only use of this service is on stop. Signed-off-by: Karel Kočí <cynerd@email.cz>
* uqmi: fix indentation style and boundaryFlorian Eckert2019-07-031-5/+9
| | | | | | Fix indentation style and boundary. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* uqmi: add mtu config option possibilityFlorian Eckert2019-07-031-2/+8
| | | | | | | | There are mobile carrier who have different MTU size in their network. With this change it is now possible to configure this with the qmi proto handler. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ar71xx: fix ath79/rb4xx IRQ initialization on kernel 4.14W. Michael Petullo2019-07-031-1/+1
| | | | | | | | | | | | Apply the same approach as in commit 3b53d6fdbc24 ("ar71xx: fix pci irq init on kernel 4.14") to fix IRQ initialization for ath79-based chipsets on rb4xx. Ref: PR#2182 Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: W. Michael Petullo <mike@flyn.org> [commit ref fix] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: Use -v1 suffix for TP-Link WDR3600/4300Adrian Schmutzler2019-07-035-14/+14
| | | | | | | | | | | | | | | In ath79, identifiers tplink_tl-wdr3600 and tplink_tl-wdr4300 have been used while most other TP-Link devices include the revision. Although there actually is only one major revision of these devices, they bear the revision on their bottom (v1.x). TP-Link also refers to the devices as V1 on its web page. This patch thus adds -v1 to both so it is more consistent with other devices and with what you would expect from reading the on-device sticker and the support pages. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* scripts: time.pl: Don't print the time on stderrAlban Bedel2019-07-031-1/+1
| | | | | | | | | Having the build time written on stderr make it appear with V=w although it is not an error or warning. Just write the time on stdout to have it part of the build log like all the rest, but not clutter the output when only warnings and errors should be shown. Signed-off-by: Alban Bedel <albeu@free.fr>
* lua5.3: stage Lua headers in proper locationJo-Philipp Wich2019-07-031-4/+5
| | | | | | | | | | Fix wrong paths in InstallDev which cause Lua 5.3 headers to be staged in /usr/include/, overwriting Lua 5.1 headers and leading to widespread build failures in all Lua related packages. Fixes: FS#2348 Fixes: 6b161bb8d5 ("lua5.3: package Lua 5.3 version") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wireguard: bump to 0.0.20190702Jason A. Donenfeld2019-07-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * curve25519: not all linkers support bmi2 and adx This should allow WireGuard to build on older toolchains. * global: switch to coarse ktime Our prior use of fast ktime before meant that sometimes, depending on how broken the motherboard was, we'd wind up calling into the HPET slow path. Here we move to coarse ktime which is always super speedy. In the process we had to fix the resolution of the clock, as well as introduce a new interface for it, landing in 5.3. Older kernels fall back to a fast-enough mechanism based on jiffies. https://lore.kernel.org/lkml/tip-e3ff9c3678b4d80e22d2557b68726174578eaf52@git.kernel.org/ https://lore.kernel.org/lkml/20190621203249.3909-3-Jason@zx2c4.com/ * netlink: cast struct over cb->args for type safety This follow recent upstream changes such as: https://lore.kernel.org/lkml/20190628144022.31376-1-Jason@zx2c4.com/ * peer: use LIST_HEAD macro Style nit. * receive: queue dead packets to napi queue instead of empty rx_queue This mitigates a WARN_ON being triggered by the workqueue code. It was quite hard to trigger, except sporadically, or reliably with a PC Engines ALIX, an extremely slow board with an AMD LX800 that Ryan Whelan of Axatrax was kind enough to mail me. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* iptables: update to 1.8.3Deng Qingfang2019-07-028-170/+28
| | | | | | | | | | | | | | | | | | | | | Update iptables to 1.8.3 ChangeLog: https://netfilter.org/projects/iptables/files/changes-iptables-1.8.3.txt Removed upstream patches: - 001-extensions_format-security_fixes_in_libip.patch - 002-include_fix_build_with_kernel_headers_before_4_2.patch - 003-ebtables-vlan-fix_userspace_kernel_headers_collision.patch Altered patches: - 200-configurable_builtin.patch - 600-shared-libext.patch No notable size changes Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [lipibtc ABI_VERSION fix]
* Make linux kernel builds reproducible when BUILDBOT selectedAlexander Couzens2019-07-021-0/+2
| | | | | | | | | | | The linux kernel is not reproducible because the build user and domain is included into the kernel. Set the build user to `builder` and build domain to buildhost. It's also possible to build reproducible builds by setting KERNEL_BUILD_USER KERNEL_BUILD_DOMAIN to static values. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ramips: add support for TP-Link TL-WR841n v14Alexander Müller2019-07-024-0/+155
| | | | | | | | | | | | | | | | | | | | | | TP-Link TL-WR841n v14 is a router based on MediaTek MT7628N. - MediaTek MT7628NN - 32 MB of RAM - 4 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet Installation: - copy the 'openwrt-ramips-mt76x8-tl-wr841n-v14-squashfs-tftp-recovery.bin' file to your tftp server root and rename it to 'tp_recovery.bin'. - configure your PC running the TFTP server with the static IP address 192.168.0.66/24 - push the reset button and plug in the power connector. Wait until the orange led starts blinking (~6sec) Signed-off-by: Alexander Müller <donothingloop@gmail.com> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> [small modifications gpio-hog]
* ramips/leds: use devicetree alias led_wlanAlexander Couzens2019-07-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | Similiar to the lantiq target use a dts alias to define the wlan led instead of static mapping in /etc/board.d/01_leds. Reduce code duplication. A device tree must define the alias "led-wlan" similiar to "led-boot". / { aliases { led-wlan = &led_wlan; }; [..] led_wlan: wlan { label = "tl-wr841n-v14:green:wlan"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; }; Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* scripts/feeds: add src-include methodBjørn Mork2019-07-011-11/+26
| | | | | | | | | | | | The src-include method allows recursive inclusion of feeds.conf snippets. This can for example be used for adding static local feeds to feeds.conf.default without ever having to update the local feeds.conf: src-include defaults feeds.conf.default src-link custom /usr/local/src/lede/custom Signed-off-by: Bjørn Mork <bjorn@mork.no>
* gemini: Add StorLink SL93512r imagesLinus Walleij2019-07-011-7/+17
| | | | | | | | | | | This adds image generation for the StorLink reference design SL93512r. This board is now supported upstream in kernel v4.19. As this image structure is identical to SQ201 and Raidsonic, we simply refer to this as "storlink-reference" from now on. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gemini: Drop switch kmod and swconfigLinus Walleij2019-07-011-1/+0
| | | | | | | | | The DIR-685 needs this module compiled in for safety (it is facing the LAN ports) and it is now (as of kernel v4.19) using the DSA switch architecture so swconfig is not needed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* lua5.3: drop unwanted & unneeded PROVIDESRafał Miłecki2019-06-301-2/+0
| | | | | | | | | | The plan for packaging Lua is to have "lua5.1" and "lua5.3" packages with only the first one having "lua" alias (PROVIDES) for backward compatibility with existing packages. Putting PROVIDES in lua5.3 was a copy & paste mistake. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: add network_get_uptime() to /lib/functions/network.shFlorian Eckert2019-06-292-1/+6
| | | | | | Add missing ubus api call for uptime value. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* mvebu: add initial support for uDPU boardVladimir Vid2019-06-284-0/+188
| | | | | | | | | | | | | | | | | | | This adds initial support for micro-DPU (uDPU) board which is based on Armada-3720 SoC. micro-DPU is the single-port FTTdp distribution point unit made by Methode Electronics which offers complete modularity with replaceable SFP modules both for uplink and downlink (G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable). On-board features: - 512 MiB DDR3 - 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC - USB 2.0 Type-C connector - 4GB eMMC - ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type) uDPU is intented to run on kernel 4.19 on newer due to the SFP and hardware support. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* mvebu: Fix platform.sh for non-generic espressobin versionsBrett Mastbergen2019-06-281-2/+4
| | | | | | | | When the non-generic espressobin targets were added these board checks were not updated. One side effect of this is that config is not saved during an upgrade of -emmc,-v7, or -v7-emmc devices. Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* u-boot-mvebu: bump to 2019.04Vladimir Vid2019-06-281-2/+2
| | | | | | | | | Some devices and packages require newer version of u-boot to work properly, update u-boot to keep up with 4.19 kernel. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> [re-added missing commit message] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* lua5.3: fix build with MacOS's makeRafał Miłecki2019-06-282-0/+18
| | | | | | | It apparently requires passing V variable explicitly. Fixes: 6b161bb8d528 ("lua5.3: package Lua 5.3 version") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lua: fix build with MacOS's makeRafał Miłecki2019-06-282-0/+18
| | | | | | | | It apparently requires passing V variable explicitly. Fixes: fe59b46ca7e0 ("lua: include version number in installed files") Reported-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lua5.3: package Lua 5.3 versionRafał Miłecki2019-06-285-0/+369
| | | | | | | | | | | | | | | | | | | | This package provides an interpreter and compiler for Lua 5.3.5. It has been decided to use separated package due to a backward incompatibility of Lua 5.2 and 5.3. This package/version: 1) Does not include lnum patch as its author didn't decide to port it to the new version. 2) Does not provide shared library as the old patch doesn't apply anymore. It can be added later if needed. 3) Does not come with examples package as tests were dropped by upstream developers. That said there is definitely a room for improvement and any further work is highly appreciated. It works however and can be safely pushed as a basic/early package release. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* lua: include version number in installed filesRafał Miłecki2019-06-285-10/+108
| | | | | | This will allow installing Lua 5.1 and newer versions at the same time. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 09:35:12 +0000