aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* grub2: make grub2 tools built in a separate variant李国2021-06-201-2/+6
| | | | | | | | | grub2 boot-related code and tools-related code may require different compilation parameters. We split them into different variants for compilation, so that we can accurately pass the required parameters and avoid causing problems. Signed-off-by: 李国 <uxgood.org@gmail.com>
* grub2: make grub2-bios-setup as a separate package李国2021-06-202-8/+25
| | | | | | | | | | The grub2 and grub2-efi packages should only contain boot-related code. grub-bios-setup is the same as grub-editenv, they are both grub2 tools and should be placed in a separate package. Signed-off-by: 李国 <uxgood.org@gmail.com> [use AUTORELEASE and update to SPDX] Signed-off-by: Paul Spooren <mail@aparcar.org>
* ramips: clean up dlink_dir-8xx-r1 recipeAdrian Schmutzler2021-06-201-5/+5
| | | | | | | | * only add factory.bin when it's defined * fix check-size vs. append-metadata * whitespace/line break cleanup Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: reorganize DTSI files for D-Link DIR-8xxAdrian Schmutzler2021-06-208-27/+40
| | | | | | | | | | | * Remove micro-DTSI mt7621_dlink_dir-882-x1.dtsi to ease reading config without too much inheritance * Use "separate" partitioning DTSIs so we can use the partitioning without a complete match on the other settings (i.e. without the former parent DTSI) * Rename files to express the new organization Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove PKG_INSTALL from CMake packagesRosen Penev2021-06-193-5/+0
| | | | | | | | | | | | It's already default with cmake.mk Found with: git grep PKG_INSTALL\: | cut -d ':' -f 1 | sort -u > ins git grep cmake.mk | cut -d ':' -f 1 > cmake comm -1 -2 ins cmake Signed-off-by: Rosen Penev <rosenp@gmail.com>
* treewide: remove BUILD_PARALLEL from CMake packagesRosen Penev2021-06-1911-16/+0
| | | | | | | | | | | | | It's already default. The only exception is mt76 which has Ninja disabled. Found with: git grep BUILD_PARALLEL | cut -d ':' -f 1 | sort -u > par git grep cmake.mk | cut -d ':' -f 1 > cmake comm -1 -2 par cmake Signed-off-by: Rosen Penev <rosenp@gmail.com>
* firmware-utils: tplink-safeloader: support Archer A6 v3 CAStijn Segers2021-06-201-0/+1
| | | | | | | | | The Canadian edition of the TP-Link Archer A6 v3 uses a different header, but otherwise it's identical to the already supported EU/US editions. Signed-off-by: Stijn Segers <foss@volatilesystems.org> Tested-by: Brian Lee <dev@leebrian.me> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
* build: Config-images: fix unit of partition sizesPaul Fertser2021-06-201-2/+2
| | | | | | | | | The code interprets these config values as Mebibytes rather than Megabytes so modify the description accordingly. Signed-off-by: Paul Fertser <fercerpav@gmail.com> [fix commit title prefix] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* tools/ccache: update to 4.3Rosen Penev2021-06-191-4/+2
| | | | | | Remove BUILD_PARALLEL as it's default now. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mac80211: fix an issue with wds links on 802.11ax devicesFelix Fietkau2021-06-191-0/+51
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: disable CONFIG_PCIE_BUS_PERFORMANCEFelix Fietkau2021-06-181-2/+2
| | | | | | | | | The option was added in 5.9 and for some reason, it is causing performance issues at least on an APU2 board with the igb device. Switch CONFIG_PCIE_BUS_DEFAULT to fix the performance issues and match the older kernel's behavior Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove extra patch accidentally added during rebaseFelix Fietkau2021-06-181-888/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: make cryptoapi support needed by mac80211 built-inFelix Fietkau2021-06-181-9/+16
| | | | | | | This reduces the flash space impact, since built-in code is much smaller than a bunch of kernel modules on squashfs Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove patches stripping down crypto supportFelix Fietkau2021-06-1812-978/+895
| | | | | | | | Use of WPA3 and things like FILS is getting much more common, and platforms that can't affort the extra kilobytes for this code are fading away. Let's not hold back modern authentication methods any longer Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: system hang caused by deferring calls into minstrel to dequeueFelix Fietkau2021-06-174-40/+127
| | | | | | Move the aggregation check to mac80211 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix minstrel sample time checkFelix Fietkau2021-06-171-0/+23
| | | | | | | | We need to skip sampling if the next sample time is after jiffies, not before. This patch fixes an issue where in some cases only very little sampling (or none at all) is performed, leading to really bad data rates Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: select iwinfoFelix Fietkau2021-06-171-1/+1
| | | | | | Since iwinfo is now used in the core scripts, it needs to be present on the system Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix processing HE capabilities (FS#3871)Felix Fietkau2021-06-171-1/+1
| | | | | | Use the right argument to fix setting unsupported capabilities to 0 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: preserve profiles.json between buildsMoritz Warning2021-06-161-9/+23
| | | | | | | | | | | | | Keep other profiles.json content if the data belongs to the current build version. Also useful for the ImageBuilder, which builds for a single model each time. Without this commit the profiles.json would only contain the latest build profile information. Signed-off-by: Moritz Warning <moritzwarning@web.de> [improve commit message] Signed-off-by: Paul Spooren <mail@aparcar.org>
* ugps: start also in case device is absentDaniel Golle2021-06-151-4/+9
| | | | | | | | | Don't bail out from init script in case the GPS device is missing. Some modems take time to come up, and some people may use things like 'kplex' to feed ugpsd. Hence it is better to always start ugpsd unconditionally and let procd's respawn take care of retrying. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: ensure that dash isn't prepended twice to abi version suffixJo-Philipp Wich2021-06-151-1/+1
| | | | | | | | | | | | | The ABIV_$(pkgname) variable already is formatted so return it as-is from the GetABISuffix macro and only filter through FormatABISuffix if we read the raw ABI version value from a version stamp file. This ensures that binary intra-package dependencies on ABI versioned libraries are properly formatted. Ref: https://github.com/openwrt/packages/issues/15871 Fixes: f6a03bff5b ("build: prepend ABI suffixes with a dash if package name ends with digit") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: fix typo in config_generate MAC checkRafał Miłecki2021-06-141-1/+1
| | | | | Fixes: 8d8eb9d13fc6 ("base-files: set MAC for bridge ports (devices) instead of bridge itself") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: set MAC for bridge ports (devices) instead of bridge itselfRafał Miłecki2021-06-141-1/+9
| | | | | | | | | | | | | This restores the original config_generate behaviour. With MAC set for bridged devices the bridge automatically gets its MAC adjusted (it picks the lowest MAC of bridged devices). This fixes confusing interfaces setup (bridge ports not having custom MAC assigned). Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com> Fixes: e002179a6d2e ("base-files: simplify setting device MAC") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* build: prepend ABI suffixes with a dash if package name ends with digitJo-Philipp Wich2021-06-142-2/+8
| | | | | | | | | | Ensure that ABI suffixes are separated with a dash from the package name if the name happens to end with a digit. This implementation detail got lost during the recent refactoring of the ABI_VERSION handling in buildroot. Ref: https://github.com/openwrt/packages/pull/14237#issuecomment-860473585 Fixes: c921650382 ("build: drop ABI version from metadata") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: bump 5.10 to 5.10.43Rui Salvaterra2021-06-148-18/+18
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ramips: refresh at803x patchDavid Bauer2021-06-141-1/+1
| | | | | | | | This patch failed to apply, breaking builds for the ramips target. Fixes commit c44cefceb3ad ("generic: kernel 5.4: fix probe error for AR803x PHYs") Signed-off-by: David Bauer <mail@david-bauer.net>
* opkg: update to git HEADHauke Mehrtens2021-06-131-3/+3
| | | | | | 1bf042d libopkg: pkg_hash: print unresolved dependencies Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* opkg: Fix download over gitHauke Mehrtens2021-06-131-1/+1
| | | | | | | | | | Set the PKG_SOURCE_URL using a lazy set to allow evaluating $(PROJECT_GIT) later. Without this change PKG_SOURCE_URL is evaluated immediately, before PROJECT_GIT is defined and the download over git is not working. Fixes: 6687a2483a09 ("opkg: use $(PROJECT_GIT), $(AUTORELEASE) and SPDX") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: mark selected packages nonsharedHannu Nyman2021-06-136-6/+14
| | | | | | | | | | | | | | | | | | | | Mark uci, ubus, libubox, lua, libnl-tiny and libjson-c as nonshared packages. This helps to keep coherent dependencies if these ABI versioned packages are later updated. Before this commit it is possible to get missing dependencies in target-specific nonshared packages (like iwinfo) that depend on these shared ABI versioned packages. If these are later updated and rebuilt, only the new ABI version will be available for download, while the target-specific packages in releases continue to depend on the old ABI version. After this commit the packages are built along the other nonshared packages by the phase1 images buildbot and will be available at the target/ download directories instead of packages/base dir. That will help to keep a coherent set available. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* kernel: move some drm symbols to generic configTomasz Maciej Nowak2021-06-137-6/+3
| | | | | | These are architecture independent, so move them to generic config. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* tegra: add support for kernel 5.10Tomasz Maciej Nowak2021-06-133-8/+24
| | | | | | Mark it as testing for now. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* tegra: copy files for kernel 5.10Tomasz Maciej Nowak2021-06-133-0/+602
| | | | | | Dumb copy of current kernel 5.4 config and patches. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* tegra: refresh kernel configTomasz Maciej Nowak2021-06-131-88/+2
| | | | | | | Recent filtering rules alow to trim the kernel configuration in size, do that to reduce the diff between current config and upcoming one. Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
* ath79: add support for TP-Link TL-WR841HP v3Andy Lee2021-06-134-2/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: - QCA9533 SoC, 8 MB nor flash, 64 MB DDR2 RAM - 2x2 9dBi antenna, wifi 2.4Ghz 300Mbps - 4x Ethernet LAN 10/100, 1x Ethernet WAN 10/100 - 1x WAN, LAN, Wifi, PWR, WPS, RE Leds - Reset, Wifi on/off, WPS, RE buttons - Serial UART at J4 onboard: 3.3v GND RX TX, 1152008N1 Label MAC addresses based on vendor firmware: LAN *:ea label WAN *:eb label +1 2.4 GHz *:ea label The label MAC address in found in u-boot 0x1fc00 Installation: Upload openwrt-ath79-generic-tplink_tl-wr841hp-v3-squashfs-factory.bin from stock firmware webgui. Maybe we need rename to shorten file name due to stock webgui error. Revert back to stock firmware instructions: - set your PC to static IP address 192.168.0.66 netmask 255.255.255.0 - download stock firmware from Tp-link website - put it in the root directory of tftp server software - rename it to wr841hpv3_tp_recovery.bin - power on while pressing Reset button until any Led is lighting up - wait for the router to reboot. done Forum support topic: https://forum.openwrt.org/t/support-for-tp-link-tl-wr841hp-v3-router Signed-off-by: Andy Lee <congquynh284@yahoo.com> [rebase and squash] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* odhcpd: update to latest git HEADHans Dedecker2021-06-131-3/+3
| | | | | | 564d25e config: fix ra_flags none setting Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* apm821xx: move CONFIG_REGULATOR to target configDavid Bauer2021-06-133-1/+2
| | | | | | | | | | | | This moves CONFIG_REGULATOR to the target config instead of the subtarget config. For kernel 5.10, CONFIG_AT803X_PHY depends on CONFIG_REGULATOR. As we do not have a size constraint, move this symbol to the target configuration for kernel 5.4 as well as 5.10. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: kernel 5.4: fix probe error for AR803x PHYsDavid Bauer2021-06-131-1/+1
| | | | | | | | | | | | | | | | | | | Atheros PHYs using the at803x driver apart from the AR8031/AR8033 fail to probe with kernel 5.4, due to ret in at803x_probe being uninitialized. [ 1.403461] Atheros 8035 ethernet: probe of 4ef600c00.ethernet:01 failed with error -1066114012 Initialize ret in order to successfully prove the PHYs on kernel 5.4. Kernel 5.10 is not affected, as the ret is always assigned prior to returning. Tested on OCEDO Koala. Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add support for TP-Link Archer C6 v3Amish Vishwakarma2021-06-136-180/+251
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds support for the TP-Link Archer C6 v3 (FCC ID TE7A6V3) The patch adds identification changes to the existing TP-Link Archer A6, by Vinay Patil <post2vinay@gmail.com>, which has identical hardware. Specification ------------- MediaTek MT7621 SOC RAM: 128MB DDR3 SPI Flash: W25Q128 (16MB) Ethernet: MT7530 5x 1000Base-T WiFi 5GHz: Mediatek MT7613BE WiFi 2.4GHz: Mediatek MT7603E UART/Serial: 115200 8n1 Device Configuration & Serial Port Pins --------------------------------------- ETH Ports: LAN4 LAN3 LAN2 LAN1 WAN _______________________ | | Serial Pins: | VCC GND TXD RXD | |_____________________| LEDs: Power Wifi2G Wifi5G LAN WAN Build Output ------------ The build will generate following set of files [1] openwrt-ramips-mt7621-tplink_archer-c6-v3-initramfs-kernel.bin [2] openwrt-ramips-mt7621-tplink_archer-c6-v3-squashfs-factory.bin [3] openwrt-ramips-mt7621-tplink_archer-c6-v3-squashfs-sysupgrade.bin How to Use - Flashing from TP-Link Web Interface ------------------------------------------------ * Go to "Advanced/System Tools/Firmware Update". * Click "Browse" and upload the OpenWrt factory image: factory.bin[2] * Click the "Upgrade" button, and select "Yes" when prompted. TFTP Booting ------------ Setup a TFTP boot server with address 192.168.0.5. While starting U-boot press '4' key to stop autoboot. Copy the initramfs-kernel.bin[1] to TFTP server folder, rename as test.bin From u-boot command prompt run tftpboot followed by bootm. Recovery -------- Archer A6 V3 has recovery page activated if SPI booting from flash fails. Recovery page can be activated by powercycling the router four times before the boot process is complete. Note: TFTP boot can be activated only from u-boot serial console. Device recovery address: 192.168.0.1 Signed-off-by: Amish Vishwakarma <vishwakarma.amish@gmail.com> [fix indent] Signed-off-by: David Bauer <mail@david-bauer.net>
* prereq-build: diff requirement to GNURosen Penev2021-06-121-3/+3
| | | | | | | tools/quilt requires GNU diffutils to compile. Failure can be simulated by installing Alpine Linux without diffutils. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files: upgrade: use procd to kill managed daemonsMichael Pratt2021-06-121-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | These processes are managed by procd and set to start again when killed via the procd instance parameter "respawn" being set during init. Example: procd_set_param respawn 3600 1 0 When they are killed manually during sysupgrade, they are started again in 5 seconds or less, depending on how the "respawn" parameter is set. Use procd through ubus to disable the instances that respawn them, however, allow dnsmasq, netifd, and logd to restart for remote logging. Properly closing all these processes increases free memory by about 3 MB, which should help low memory devices upgrade without crashing. For very low memory devices (set to 32 MB for now) also kill dnsmasq, netifd, and logd for an additional 3 MB of free memory. Also, bump sleep values to allow at least 10 seconds for network interfaces and daemons to come up after they are killed and restarted before caches are dropped. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* README: switch from freenode to oftcPaul Spooren2021-06-121-2/+2
| | | | | | | We recently switched from freenode.net to oftc.net, reflect that in the README and update the links. Signed-off-by: Paul Spooren <mail@aparcar.org>
* README: update routing.git URLPaul Spooren2021-06-121-2/+2
| | | | | | | The routing packages feed moved from `openwrt-routing/packages` to `openwrt/routing`, reflect that in the README. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: do not override DESTDIR for cmake ninja host buildsFelix Fietkau2021-06-121-2/+2
| | | | | | The full prefix is already passed to cmake Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: build ninja before ccache to fix the build orderFelix Fietkau2021-06-122-2/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools: fix dependencies of cmake packagesFelix Fietkau2021-06-121-1/+1
| | | | | | Make cmake depend on ninja, so that other cmake based tools also depend on it Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: use ninja for cmake packages by defaultFelix Fietkau2021-06-121-0/+2
| | | | | | | | | | | | | | | | | | | | | | Speed goes from: Executed in 178.08 secs fish external usr time 20.16 mins 509.00 micros 20.16 mins sys time 2.88 mins 39.00 micros 2.88 mins To: Executed in 175.90 secs fish external usr time 20.19 mins 0.00 micros 20.19 mins sys time 2.85 mins 497.00 micros 2.85 mins Tested with "time make -j 12" on AMD Ryzen 3600 When building individual packages, the build time difference is often significantly bigger than that. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* package: fix cmake packages build with ninjaRosen Penev2021-06-125-4/+5
| | | | | | | | += is needed for CMAKE_OPTIONS. mt76 needs Ninja disabled as the kernel stuff uses normal make. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: add ninja build tool and make it available for cmakeFelix Fietkau2021-06-125-1/+2359
| | | | | | | | | | | | ninja is faster at building cmake packages than make, and according to reports also more reliable at handling parallel builds This commit includes a patch that adds GNU make jobserver support, in order to allow more precise control over the number of parallel tasks Enable parallel build by default for packages using ninja Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Rosen Penev <rosenp@gmail.com>
* u-boot: support verbose buildFelix Fietkau2021-06-121-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add support for 802.3 encap offload with software rate controlFelix Fietkau2021-06-122-0/+158
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>