aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* uboot-sunxi: rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3Petr Štetiar2020-03-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | Rename the board as done in upstream commit 268ae6548779 ("sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3") which backs the rename with the following reasoning: The brand Sinovoip is used for Sinovoip's original VOIP products, while the Bananapi brand is for the single board computers they produce. This has been verified by Bananapi. Rename the board from "Sinovoip BPI M2 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is used. To support the H5 variant of this board, the "H3" suffix is added to the defconfig name. This has to be done in order to allow building U-Boot past v2019.04 release where this change was introduced. Ref: https://github.com/openwrt/openwrt/pull/2849#discussion_r396401489 Suggested-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-sunxi: Banana Pi M2 Ultra switch to mainline defconfigAleksander Jan Bajkowski2020-03-282-27/+2
| | | | | | U-boot also have defconfig for this board. In 2019.01 branch they are identical. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* uboot-sunxi: bump to 2020.01Petr Štetiar2020-03-2813-103/+23
| | | | | | | | | Refreshed patches, removed following, probably obsolete patches: 221-compatible-old-dtc.patch 240-sun50i-h5-Orange-Pi-Zero-Plus-Fix-SdCard-detection.patch Signed-off-by: Petr Štetiar <ynezz@true.cz>
* linux-firmware: add firmware for RTL8723BS SDIO modulesPetr Štetiar2020-03-281-0/+7
| | | | | | | Adds firmware package for Realtek RTL8723BS SDIO Wireless LAN NIC driver available in the staging. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* mac80211: realtek: add staging driver for RTL8723BS SDIO modulePetr Štetiar2020-03-281-1/+18
| | | | | | | Adds kernel module for Realtek RTL8723BS SDIO Wireless LAN NIC driver available in the staging. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* bcm27xx: 5.4: add support for Sensirion SPS30 in i2c-sensor overlayPetr Štetiar2020-03-281-0/+59
| | | | | | | Add support for Sensirion SPS30 particulate matter sensor with fixed address 0x69. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: rename Mikrotik RB 922UAGS-5HPacD mtd partitionThibaut VARÈNE2020-03-272-4/+4
| | | | | | | | | | | | | | | | In RouterBOARD parlance there never was an "art" partition. This partition has always been named 'hard_config' on ar71xx. This partition contains more than just ART (Atheros Radio Test) data. It includes the hardware description (product code, serial, board identifier, name, hardware options, MAC address), as well as other bits affecting the operation of RouterBoot. To avoid confusion with regular ART data, this partition is renamed in line with historical ar71xx and ramips nomenclature as 'hard_config'. Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix Mikrotik wAP G-5HacT2HnD mtd partitionsThibaut VARÈNE2020-03-273-29/+38
| | | | | | | | | | | | | | | | | | | | | | In RouterBOARD parlance there never was an "art" partition. This partition has always been named 'hard_config' on ar71xx. This partition contains more than just ART (Atheros Radio Test) data. It includes the hardware description (product code, serial, board identifier, name, hardware options, MAC address), as well as other bits affecting the operation of RouterBoot. To avoid confusion with regular ART data, this partition is renamed in line with historical ar71xx and ramips nomenclature as 'hard_config'. This commit fixes the previous support files and implements the nested RouterBoot partition scheme as already used by ramips-based SPI-NOR RouterBOARD DTSes, as previously reviewed and implemented in bbe2cf657ca7 ("ramips: fix RBM11G partitioning"). Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kirkwood: fix DTS partitions for Pogoplug E02Alberto Bursi2020-03-273-0/+110
| | | | | | | | | | | | | | | | | | | | | The Pogoplug E02 was not using the correct partitions in device tree, but used the ones from upstream and thus could not boot OpenWrt images. In contrast, uboot-kirkwood is using the correct partitions since d3fc4fbd74dc ("uboot-kirkwood: re-add Pogoplug E02 support"). This patch corrects the partitions in DTS for kernels 4.14, 4.19 and 5.4. Fixes: 2b0fa00da8fc ("kirkwood: add Pogoplug E02 Kernel support") Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com> Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run> [commit title/message facelift, refresh 4.14 patch] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatke: add support for elecom-wrc-2533gentJohn Crispin2020-03-275-1/+1249
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the MT7622-based Elecom WRC-2533gent router, with spi-nand storage and 512MB RAM. The device has the following specifications: * MT7622 (arm64 dual-core) * 512MB RAM (DDR3) * 4GB storage (spi-nand) * 5x 1Gbps Ethernet (RTL8337C switch) * 1x UART header * 1x USB 3.0 port * 5x LEDs * 1x reset button * 1x WPS button * 1x slider switch * 1x DC jack for main power (12V) The following has been tested and is working: * Ethernet switch * 2.4g and 5g wifi * USB 3.0 port * sysupgrade * buttons/leds Not working: * bluetooth firmware does not load even though it is present int he rootfs Signed-off-by: John Crispin <john@phrozen.org>
* mediatek: more v5.4 mtd fixesJohn Crispin2020-03-278-45/+1658
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* hostapd: fix no_reload logicJohn Crispin2020-03-271-2/+4
| | | | | | | the code would unconditionally tear down all interfaces upon a reconf. This should only be done when the reconf call fails. Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: fix brcmfmac monitor interface crashRafał Miłecki2020-03-272-1/+101
| | | | | | | This fixes bug in brcmfmac *exposed* by ipv6/addrconf fix. Fixes: ec8e8e2ef082 ("kernel: backport out-of-memory fix for non-Ethernet devices") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ath10k-firmware: update ath10k-ct firmware imagesÁlvaro Fernández Rojas2020-03-271-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release notes for 017: Wave-1: * March 19, 2020: Fix problem where power-save was not enabled when going off-channel to scan. The problem was a boolean logic inversion in the chmgr code, a regression I introduced a long time ago. * March 19, 2020: When scanning only on current working channel, do not bother with disable/enable powersave. This should make an on-channel scan less obtrusive than it was previously. * March 23, 2020: Fix channel-mgr use-after-free problem that caused crashes in some cases. The crash was exacerbated by recent power-save changes. * March 23, 2020: Fix station-mode power-save related crash: backported the fix from 10.2 QCA firmware. * March 23, 2020: Attempt to better clean up power-save objects and state, especially in station mode. Release notes for 016: Wave-1 changes, some debugging code for a crash someone reported, plus: * February 28, 2020: Fix custom-tx path when sending in 0x0 for rate-code. Have tries == 0 mean one try but NO-ACK (similar to how wave-2 does it). wave-2: * Fixed some long-ago regressions related to powersave and/or multicast. Maybe fix some additional multicast and/or tx-scheduling bugs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz>
* ath10k-ct: update to version 2020-03-25Álvaro Fernández Rojas2020-03-271-3/+3
| | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz>
* netifd: fix compilation with musl 1.2.0Hans Dedecker2020-03-261-3/+3
| | | | | | 1e8328 system-linux: fix compilation with musl 1.2.0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: fix compilation with musl 1.2.0Hans Dedecker2020-03-261-3/+3
| | | | | | 49305e6 odhcp6c: fix compilation with musl 1.2.0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ar71xx: use status led for GL.iNet GL-AR750SJan Alexander2020-03-261-0/+1
| | | | | | | | | | | | Use power led for device status. The status led behavior has already been fixed in af28d8a539fe ("ath79: add support for GL.iNet GL-AR750S") when porting the device to ath79. This fixes it for ar71xx as well. Signed-off-by: Jan Alexander <jan@nalx.net> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for TP-Link TL-WA860RE v1Adrian Schmutzler2020-03-264-0/+84
| | | | | | | | | | | | | | | | | | | | | | | | This ports support for the TL-WA860RE v1 range extender from ar71xx to ath79. Specifications: Board: AP123 / AR9341 rev. 3 Flash/RAM: 4/32 MiB CPU: 535 MHz WiFi: 2.4 GHz b/g/n Ethernet: 1 port (100M) Two external antennas Flashing instructions: Upload the factory image via the vendor firmware upgrade option. Recovery: Note that this device does not provide TFTP via ethernet like many other TP-Link devices do. You will have to open the case if you require recovery beyond failsafe. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Sebastian Knapp <sebastian4842@outlook.com>
* ath79: add support for TP-Link TL-WDR4310 v1Adrian Schmutzler2020-03-265-2/+25
| | | | | | | | | This device seems to be identical to the TL-WDR4300, just with different release date/region and TPLINK_HWID. Support is added based on the ar71xx implementation. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* dnsmasq: fix dnssec+ntp chicken-and-egg workaround (FS#2574)Henrique de Moraes Holschuh2020-03-252-4/+3
| | | | | | | | | | | | | | | | | | | | | | | Fix the test for an enabled sysntp initscript in dnsmasq.init, and get rid of "test -o" while at it. Issue reproduced on openwrt-19.07 with the help of pool.ntp.br and an RTC-less ath79 router. dnssec-no-timecheck would be clearly missing from /var/etc/dnsmasq.conf.* while the router was still a few days in the past due to non-working DNSSEC + DNS-based NTP server config. The fix was tested with the router in the "DNSSEC broken state": it properly started dnsmasq in dnssec-no-timecheck mode, and eventually ntp was able to resolve the server name to an IP address, and set the system time. DNSSEC was then enabled by SIGINT through the ntp hotplug hook, as expected. A missing system.ntp.enabled UCI node is required for the bug to show up. The reasons for why it would be missing in the first place were not investigated. Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* dnsmasq: init: get rid of test -a and test -oHenrique de Moraes Holschuh2020-03-251-17/+17
| | | | | | | Refer to shellcheck SC2166. There are just too many caveats that are shell-dependent on test -a and test -o to use them. Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br>
* uclient: update mirror hashJo-Philipp Wich2020-03-251-1/+1
| | | | | Fixes: 98017228dd ("uclient: bump to latest Git HEAD") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uclient: bump to latest Git HEADJo-Philipp Wich2020-03-251-2/+2
| | | | | | af585db uclient-fetch: support specifying advertised TLS ciphers Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uhttpd: bump to latest Git HEADJo-Philipp Wich2020-03-251-3/+3
| | | | | | | 5e9c23c client: allow keep-alive for POST requests 5fc551d tls: support specifying accepted TLS ciphers Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ustream-ssl: bump to latest Git HEADJo-Philipp Wich2020-03-251-4/+4
| | | | | | | | | | 5e1bc34 ustream-openssl: clear error stack before SSL_read/SSL_write f7f93ad add support for specifying usable ciphers Also bump the ABI version since the layout of `struct ustream_ssl_ops` changed. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: prereq: tidy gcc version checksKevin Darbyshire-Bryant2020-03-241-16/+0
| | | | | | | | | | | | | | | | | There is a restriction in the number of parameters(10) that may be passed to the SetupHostCommand macro so continually adding explicit gcc'n' version checks ends up breaking the compiler check for the later versions and oddballs like Darwin as was done in 835d1c68a0 which added gcc10. Drop all the explicitly specified gcc version checks. If a suitable gcc compiler is not found, it may be specified at the dependency checking stage after which that version will be symlinked into the build staging host directory. eg. 'CC=gccfoo CXX=g++foo make prereq' Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Jo-Philipp Wich <jo@mein.io>
* nftables: bump to 0.9.3Kevin Darbyshire-Bryant2020-03-241-2/+2
| | | | Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* libnftnl: drop unsupported configure optionKevin Darbyshire-Bryant2020-03-231-2/+1
| | | | | | --without-json-parsing is not a supported configure option. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* x86/geode: fixup FEATURE inheritancePaul Spooren2020-03-231-1/+1
| | | | | | | | | | | | In the geode subtarget all default x86 features were overwritten via := instead of extending them via +=. This patch fixes the inheritance and thereby the compilation of x86/geode target. Compile tested x86/geode. Signed-off-by: Paul Spooren <mail@aparcar.org>
* x86/geode: add missing include after rebasePaul Spooren2020-03-231-0/+4
| | | | | | | | | | | | | The x86 image generation was refacted via cb007a7bf6 and accidently not included `geode.mk` when selected as subtarget. Now the file is included and image compilation for x86/geode works again. Thanks to Russell Senior <russell@personaltelco.net> for reporting the problem and suggesting a patch! Signed-off-by: Paul Spooren <mail@aparcar.org>
* bcm27xx: refresh linux 5.4 configsÁlvaro Fernández Rojas2020-03-234-66/+0
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx-userland: update to latest versionÁlvaro Fernández Rojas2020-03-231-2/+2
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx-gpu-fw: update to latest versionÁlvaro Fernández Rojas2020-03-231-26/+26
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm27xx: sync 5.4 patches with RPi FoundationÁlvaro Fernández Rojas2020-03-2317-2/+2797
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* build: add GCC 10 version detectionRobert Marko2020-03-231-4/+6
| | | | | | | Lets add GCC 10 detection to the build system as distributions like Fedora 32 have started shipping with it. Some tools like mtd-utils need work to compile under GCC10, but that will be next step. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* apm821xx: switch to 5.4 kernelChristian Lamparter2020-03-221-2/+1
| | | | | | This patch switches the APM821XX target to the linux kernel 5.4 variant. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: wndr4700: add preliminary drivetemp sensorChristian Lamparter2020-03-222-2/+25
| | | | | | | | | | | | | | | | | | This patch prepares the WNDR4700 to use the HDD sensor for the thermal zone. While the kernel's thermal.txt device-tree binding documentation files talks about supporting multiple sensors for a zone. This sadly is NOT the case. Even the most current upstream kernels (5.6-rc) supports just >one< sensor per zone: (driver/base/of-thermal.c:886) | * REVIST: for now, the thermal framework supports only | * one sensor per thermal zone. Thus, we are considering | * only the first two values as slope and offset. I do hope that this warning will prevent others wasteing time on trying to figure out why their multi-sensor thermal-zones definitions are not working as specified. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add drivetemp sensor for the WD MyBook SeriesChristian Lamparter2020-03-222-1/+11
| | | | | | | | | This patch adds the hwmon-drivetemp to the device. It also adds device-tree bindings. This can be useful to automate external fans which can be controlled for example by either an unused sata-port or by the usb-power regulator. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* x86: geode/legacy: fix missing watchdog core dependenciesChristian Lamparter2020-03-224-0/+4
| | | | | | | | | | | | | | | | | This patch follows the other patches that added the watchdog core to various (armvirt, malta, ath79, ...) targets that have been hit by the following build error: Package kmod-hwmon-sch5627 is missing dependencies for the following libraries: watchdog.ko In theory, we could have just added the CONFIG_WATCHDOG_CORE=y to the Kconfig variable of kmod-hwmon-sch5627's package definition. This would have forced the watchdog core to be builtin and less architectures would need to be updated. But we might as well follow through here. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* dnsmasq: add 'scriptarp' optionJordan Sokolic2020-03-222-1/+3
| | | | | | | | | | | Add option 'scriptarp' to uci dnsmasq config to enable --script-arp functions. The default setting is false, meaning any scripts in `/etc/hotplug.d/neigh` intended to be triggered by `/usr/lib/dnsmasq/dhcp-script.sh` will fail to execute. Also enable --script-arp if has_handlers returns true. Signed-off-by: Jordan Sokolic <oofnik@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* ath79: fix missing return statement in ar934x_nandDavid Bauer2020-03-221-4/+12
| | | | | | | | | | | The reset assert and deassert methods currently miss a return value, leading to a compilation warning. Return the return-value of reset_control_assert and reset_control_deassert to fix these warnings. Suggested-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: fix NAND driver compilation for kernel 5.4David Bauer2020-03-221-5/+122
| | | | | | | | | | | | | | | This fixes the compilation of the AR934x NAND controller driver for kernel 5.4 while leaving it untouched for kernel 4.19. This change is currently not run-tested, as i do not have such a device at hand. CC: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> CC: André Valentin <avalentin@marcant.net> CC: WeiDong Jia <jwdsccd@gmail.com> Signed-off-by: David Bauer <mail@david-bauer.net> Tested-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* oxnas: yet another irqchip related patchDaniel Golle2020-03-221-0/+55
| | | | | | | This time DTS fix, again from Sungbo Eo <mans0n@gorani.run> ARM: dts: oxnas: Fix clear-mask property Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iwinfo: update to latest Git HEADDavid Bauer2020-03-222-12/+3
| | | | | | | | | | | | 9f5a7c4 iwinfo: add missing HT modename for HT-None 06a03c9 Revert "iwinfo: add BSS load element to scan result" 9a4bae8 iwinfo: add device id for Qualcomm Atheros QCA9990 eba5a20 iwinfo: add device id for BCM43602 a6914dc iwinfo: add BSS load element to scan result bb21698 iwinfo: add device id for Atheros AR9287 7483398 iwinfo: add device id for MediaTek MT7615E Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: align Ubiquiti AC Pro ethernet map to factoryDavid Bauer2020-03-221-2/+5
| | | | | | | | | | | | | | | | | | | | | | The Uniquiti AC Pro and Ubiquiti AC Mesh Pro currently have the "Primary" and "Secondary" ethernet ports configured to offer LAN as well as WAN. However, Uiquiti describes the following behavior for the devices Ethernet ports: > Secondary UniFi Access Point (UAP) Ethernet ports don't > provide PoE passthrough (to run current to a second powered > device), but they do support data passthrough. > It serves as a bridged interface between main / secondary > Ethernet port. To reduce confusion for users (as LAN and WAN functionality is not visible on the device itself), configure both ports to offer LAN functionality. Users can still configure a WAN interface on a port they are able to choose. CC: Lucian Cristian <lucian.cristian@gmail.com> Reported-by: Florian Klink <flokli@flokli.de> Signed-off-by: David Bauer <mail@david-bauer.net>
* tools: squashfskit4: fix build with GCC10Robert Marko2020-03-222-1/+44
| | | | | | | | In order to build squashfskit with GCC10, this backport from upstream is needed. Signed-off-by: Robert Marko <robert.marko@sartura.hr> [increase PKG_RELEASE] Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* squashfskit4/Makefile: introduce PKG_RELEASE=1Alexander Couzens2020-03-221-1/+1
| | | | | | When adding patches, the PKG_RELEASE should be increased. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ath79: add support for Ubiquiti NanoBridge M (XM)Roger Pueyo Centelles2020-03-225-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Ubiquiti NanoBridge M (XM), a 802.11n wireless with a feed+dish form factor, with the same board definition as the Bullet M (XM). Specifications: - Atheros AR7241 SoC - 32 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in - Power and LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) Flashing via stock GUI: - WARNING: flashing OpenWrt from AirOS v5.6 or newer will brick your device! Read the wiki for more info. - Downgrade to AirOS v5.5.x (latest available is 5.5.11) first. - Upload the factory image via AirOS web GUI. Flashing via TFTP: - WARNING: flashing OpenWrt from AirOS v5.6 or newer will brick your device! Read the wiki for more info. - Downgrade to AirOS v5.5.x (latest available is 5.5.11) first. - Use a pointy tool (e.g., pen cap, slotted screwdriver) to keep the reset button pressed. - Power on the device (keep reset button pressed). - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button. - The device starts a TFTP server at 192.168.1.20. - Set a static IP on the computer (e.g., 192.168.1.21/24). - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanobridge-m-squashfs-factory.bin Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> [rebase, fix includes in DTS, add label MAC address, add SOC and fix sorting in generic-ubnt.mk] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* samba36: log error if getting device info failedRafał Miłecki2020-03-212-4/+10
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>