aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* toolchain: unbreak glibc on MIPSJonas Gorski2017-02-271-0/+36
| | | | | | | | | | | | | | | Binutils recently updated the ABI version to 5, which broke glibc, as it refuses to load anything > 3. Upstream reverted the ABI version update, so backport the commit. Fixes the following error on boot: /bin/sh: error while loading shared libraries: /lib/libcrypt.so.1: ELF file ABI version invalid [ 0.920077] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00007f00 [ 0.920077] [ 0.929450] Rebooting in 1 seconds.. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ramips: add support for HiWiFi HC5661AWang JiaWei2017-02-277-2/+140
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HC5661A is almost the same as HC5661 but MT7628AN is used instead of MT7620A. - MT7628AN - 128 MiB DDR2 RAM (W971GG6KB-25) - 16 MiB SPI NOR flash (W25Q128) - SD slot (not work yet) - 1+4 x 100M Ethernet - 802.11 b/g/n Wi-Fi - 3 x LED - 1 x button - UART pad on PCB (JP1: TX, RX, GND, 3.3V) The factory flash layout seems different from HC5661. "hwf_config" is renamed to "oem" and its size changes to 0x20000. It is modified accordingly in the dts file. 0x000000000000-0x000000030000 : "u-boot" 0x000000030000-0x000000040000 : "hw_panic" 0x000000040000-0x000000050000 : "Factory" 0x000000050000-0x000000160000 : "kernel" 0x000000160000-0x000000fc0000 : "rootfs" 0x000000bb0000-0x000000fc0000 : "rootfs_data" 0x000000fc0000-0x000000fe0000 : "oem" 0x000000fe0000-0x000000ff0000 : "bdinfo" 0x000000ff0000-0x000001000000 : "backup" 0x000000050000-0x000000fc0000 : "firmware" To install LEDE, enabled the "developer mode", which will *void your warranty* and open the SSH server at port 1022. sysupgrade -n -F lede-ramips-mt7628-hc5661a-squashfs-sysupgrade.bin SD slot: - Tried to add modules kmod-sdhci kmod-sdhci-mt7620, and corresponding dts block. - It will block WAN + 3xLAN ports, only one LAN works. - I'm not sure why, everything else works fine. Signed-off-by: Wang JiaWei <buaawjw@gmail.com>
* kernel: update 4.9 to 4.9.13Ansuel Smith2017-02-272-10/+10
| | | | | | refresh patch 630-packet_socket_type Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: Add TPM Module supportChris Blake2017-02-274-0/+65
| | | | | | | | The following will enable the TPM kernel module, as well as support for the atmel i2c TPM driver. Tested and confirmed working on an Aerohive AP-121 Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ipq806x: sanitize Dni image generationThomas Reifferscheid2017-02-261-4/+3
| | | | | | | | | The more straight forward approach for generating the pure and unpadded kernel file which then can be used for initramfs straight. Build options for factory.img and sysupgrade.tar are handeled seperately. Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
* kernel: enable hwmon-k10temp in the x86/64 kernel config instead of packaging itFelix Fietkau2017-02-262-17/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* tools/m4: update 1.4.18Etienne Haarsma2017-02-262-19/+2
| | | | | | Patch 100-fix-gets-removal.patch is removed because it's included in the new version. Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
* build: clean up redundant touching of the package install info fileFelix Fietkau2017-02-262-10/+6
| | | | | | | Instead of using a separate .clean stamp file, remove the install info file on compile, then append the install package list afterwards Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: get rid of host.mkFelix Fietkau2017-02-2620-70/+11
| | | | | | Defined required host related variables in toplevel.mk instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: get rid of FIND_L from host.mkFelix Fietkau2017-02-262-6/+1
| | | | | | | This was added for Mac OS X many years ago, but recent versions also support find -L Signed-off-by: Felix Fietkau <nbd@nbd.name>
* packge/boot/rbcfg: add new boot constants found in the recent Mikrotik devicesAlex Samorukov2017-02-262-0/+6
| | | | Signed-off-by: Alex Samorukov <samm@os2.kiev.ua>
* grub2: update to 2.02~rc1Alif M. Ahmad2017-02-261-2/+2
| | | | Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
* ar71xx: mikrotik: erase firmware partition on SPI NOR devices in pre_upgrade()Thibaut VARENE2017-02-261-0/+8
| | | | | | | | | | | | On Mikrotik SPI NOR devices, the firmware partition must be erased when flashing from stock firmware, otherwise leftover bits (in particular a kernel signature) can trigger a boot loop. When booted from initramfs (the only way to flash LEDE on these devices), this patch unconditionally erases the firmware partition in the pre_upgrade() stage for all supported SPI NOR devices. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: include only kmod-mt76-core in EX2700 imageJoseph C. Lehner2017-02-261-0/+1
| | | | | | | This patch frees up flash space on the EX2700, by removing unused mt76 drivers and firmware. Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
* ar71xx: Enable RB2011 TTYArvid E. Picciani2017-02-261-1/+2
| | | | | | Enables TTY on the Mikrotik RouterBoard RB2011*R* Signed-off-by: Arvid E. Picciani <aep@exys.org>
* kernel: update 4.9 to 4.9.12Ansuel Smith2017-02-266-28/+28
| | | | | | | | Refresh generic patch Compiled and tested WRT1900ACS Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* layerscape: add LS1043A Rev1.1 supportYangbo Lu2017-02-2615-4/+1191
| | | | | | | | Backport kernel patches for LS1043A Rev1.1 support from upstream, patchwork, and SDK. And update to latest u-boot to support LS1043A Rev1.1. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* iftop: bump to latest upstreamKevin Darbyshire-Bryant2017-02-262-73/+8
| | | | | | | | | Drops a LEDE carried patch now upstream. Convert to autotools. A number of nits fixed upstream (dns & short packet handling most notable) Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* relayd: fix making incomplete instance json dataYousong Zhou2017-02-252-7/+14
| | | | | | | | Defer procd_open_instance only after validity check passed. Fixes FS#541 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* relayd: remove old start-stop-service related codeYousong Zhou2017-02-251-15/+0
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ubus: update to the latest versionFelix Fietkau2017-02-251-3/+3
| | | | | | | | | | c09e4f0 ubusd: fix incomplete copy of shared buf during queue-ing 453b87f cli: add support for subscribing to objects 6eb3c96 cli: do not use default timeout for listen dfe3383 libubus: reset ctx->sock.error when doing ubus reconnect 34c6e81 cli: fix listen_timeout compile issue Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: Update to latest versionTed Hess2017-02-241-3/+3
| | | | | | 9d6305a utils: Change calloc_a() to return size_t aligned pointers Signed-off-by: Ted Hess <thess@kitschensync.net>
* ubox: fix possible address alignment issueYousong Zhou2017-02-241-3/+3
| | | | | | | | Fixes FS#544 3dc78a4 kmodloader: don't store aliases info in struct module Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ppp: ppp6-up: add executable permission bitYousong Zhou2017-02-241-0/+0
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* mac80211: hwsim: select DRIVER_11AC_SUPPORT and DRIVER_11W_SUPPORTYousong Zhou2017-02-241-1/+1
| | | | | | | | This is required for default wireless configuration of malta target to work out of the box again. Fixes "77ece30e: hostapd: Add ability to specify that that wireless driver supports 802.11ac" Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* iw: sync nl80211.h with mac80211 packageFelix Fietkau2017-02-241-5/+289
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* odhcpd: update to git HEAD version (FS#397) (FS#481)Hans Dedecker2017-02-231-3/+3
| | | | | | | | | | | | | | | | | | 1b630f8 router: don't announce prefixes with valid lifetime equal to 0 ba0cac0 router: fix arithmetic exception fault 3495f17 router: allow RA prefix lifetime being set to leasetime value (FS#397) e437ce9 treewide: simplify dhcp leasetime checking 942fb33 router: support ra_mininterval and ra_lifetime uci parameters (FS#397) f913337 router.h: fix alignment style 4dc7edb Revert "odhcpd.h: fix alignment style" 62ea54f odhcpd.h: fix alignment style a898ee5 config: make loglevel configurable via uci (FS#481) 51c756c odhcpd: display correct default log level in usage text 68ee0b5 treewide: define and use macro IN6_IS_ADDR_ULA fa57225 ndp: deregister netlink event socket for non recoverable errors ac70d28 odhcpd: fix white space errors Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* swconfig: Bugfix switch_port uci option parsingBen Kelly2017-02-231-2/+2
| | | | | | | | When not defining 'device' or 'vlan' in relevant switch_port uci sections, behaviour is inconsistent due to *devn, *port and *vlan pointers not being zero initialized. Signed-off-by: Ben Kelly <ben@benjii.net>
* uboot-omap: Makefile: Include kernel.mkAlexandru Gagniuc2017-02-231-0/+1
| | | | | | | | | | | This is needed for the definition of $(LINUX_DIR). This is used in u-boot.mk to change the device-tree compiler to the dtc used by linux. Without this, the build will use the system dtc. This results in a build failure when a dtc does not exist outside the buildroot. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
* ar71xx: use common firmware partition for WNDAP360Felix Fietkau2017-02-231-2/+2
| | | | | | Patch from https://github.com/openwrt/openwrt/pull/398 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: disable potentially harmful PS software retry for A-MPDU sessionsFelix Fietkau2017-02-231-0/+28
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: fix stopping netifd + interfacesFelix Fietkau2017-02-231-10/+3
| | | | | | | stop() is overwritten by rc.common, so implement stop_service instead. While at it, remove the now unnecessary restart() override Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: split kmod packageJoseph C. Lehner2017-02-231-13/+49
| | | | | | | | | | | | | | | | This patch splits `kmod-mt76` into three separate packages: `kmod-mt76-core`, `kmod-mt76x2` and `kmod-mt7603`. By making `kmod-mt76` a metapackage containing these new packages, the previous behaviour of including all drivers and firmware is left unchanged, unless explicitly unselected in `DEVICE_PACKAGES`. This splitting is especially beneficial for devices with small flash chips, since the `kmod-mt76` package currently requires ~160K on squashfs (after compression). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* lantiq: fix broadcast packets leaking on the wrong vlan on xrx200Felix Fietkau2017-02-232-10/+12
| | | | | | | | | | | | | | | The ethernet driver uses a port map override via special tag to control the ports on which multicast packets are sent. This was added to work around an issue in the switch that was occasionally leaking packets onto the wrong vlan. Unfortunately the change had some leftover lines that were overwrting the port map with a list of all ports, thus always leaking packets onto the wront vlan. Fix this by only enabling the override with the VLAN port map and only if a matching VLAN port map was actually found Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update kernel 4.4 to 4.4.50Kevin Darbyshire-Bryant2017-02-2310-56/+56
| | | | | | | | | | Bump kernel from 4.4.49 to 4.4.50 Compile tested: All targets Run tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* opkg: fix stray printf() (#551)Jo-Philipp Wich2017-02-231-3/+3
| | | | | | | Update to latest Git head to get rid of a stray printf() causing unwanted output in the "opkg list-upgradable" command. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: add missing config symbol for linux 3.18Felix Fietkau2017-02-221-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: rename patch to avoid duplicate numberFelix Fietkau2017-02-221-0/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libpcap: add optional netfilter supportMartin Schiller2017-02-222-2/+9
| | | | | | This is needed to use the nflog interface with tcpdump Signed-off-by: Martin Schiller <mschiller@tdt.de>
* build: unsilence move commandThomas Reifferscheid2017-02-221-1/+1
| | | | | | | | | The @ sign in front of the "mv" command was significantly suppressing output to stdout. When reviewing the make/build logs it was tricking me a whole lot and it mad me lose time. Removing the @ sign will get stdout and logs right about what happened when. Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
* ar71xx: Enable mtdsplit support for RB SPI NOR devicesThibaut VARENE2017-02-224-32/+17
| | | | | | | | | | | | | | | | | | This patch enables mtdsplit for the MikroTik subtarget. It converts mach-rbspi.c to use a single "firmware" partition. Finally, it converts the SPI NOR profile to metadata images: the original combined-image format is gone, the images are now "standard" sysupgrade images with metadata appended. Note: kernel2minor apparently pads the kernel container to erase-block boundary, but this is undocumented behaviour, so we do not rely on it and call pad-to anyway. Note: in platform.sh, the boards are tested last in platform_check_image() as this should eventually become the "*)" default case when more devices switch to metadata images. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ar71xx: remove bogus "rb*)" catch-all from platform.shThibaut VARENE2017-02-221-8/+54
| | | | | | This patch replaces a dangerous catch-all with the exhaustive list of devices. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* kernel: mtdsplit: Add support for Mikrotik NOR firmwareThibaut VARENE2017-02-225-0/+125
| | | | | | | | | | | | | | | | The RouterBOOT bootloader does not care where the kernel lives in the SPI flash, all that matters is that the kernel is wrapped in the custom yaffs container as generated by kernel2minor. This container has a fixed signature as follows: 00000000 00 00 00 01 00 00 00 01 ff ff 6b 65 72 6e 65 6c |..........kernel| This patch adds mtdsplit support for identifying that signature and triggering the search for the rootfs. rootfs is expected at EB boundary since we use wget mtd_find_rootfs_from(). We make no use of the yaffs file size field because it contains invalid data in the image generated by kernel2minor. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* dnsmasq: bump to dnsmasq v2.77test4Kevin Darbyshire-Bryant2017-02-223-217/+2
| | | | | | | | | | | | | | --bogus-priv now applies to IPv6 prefixes as specified in RFC6303 - this is significantly friendlier to upstream servers. CNAME fix in auth mode - A domain can only have a CNAME if it has no other records Drop 2 patches now included upstream. Compile & run tested Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* opkg: fix handling conffiles in status listsJo-Philipp Wich2017-02-221-3/+3
| | | | | | | A missing list pointer initialization caused opkg to ignore conffile entries from status files, breaking the conffile tracking on the target. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "kernel: ar8327/ar8337: disable ARL access code to avoid lockups ↵Stijn Tintel2017-02-221-6/+0
| | | | | | | | | | | (FS#384)" This reverts commit ec1a695daa7390a6c24e3b28d3956f194cba2cb5. Revert the workaround, the problem was properly fixed in 237454991618e0e8b7ceb8a8a2a43fca12c1a454. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ipq806x: fix fakerootfs positionThomas Reifferscheid2017-02-211-2/+2
| | | | | | | | | | | | The fakeroot header is expected by the netgear bootloader in the last 64 bytes of the last block used by the uImage. With the current linux-4.9 uImage being more than 128k smaller than the linux-4.4 uImage the bootloader was unable to locate the rootfs ih_magic and was refusing to load and start the kernel. Fixes: FS#542 Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
* build: skip opkg host dependency within the SDKFelix Fietkau2017-02-211-1/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* archs38: only calculate entry point address when necessaryFelix Fietkau2017-02-211-5/+2
| | | | | | | $(eval) runs even during prereq check, which can cause bogus error messages Signed-off-by: Felix Fietkau <nbd@nbd.name>
* arc770: only calculate entry point address when necessaryFelix Fietkau2017-02-211-5/+2
| | | | | | | $(eval) runs even during prereq check, which can cause bogus error messages Signed-off-by: Felix Fietkau <nbd@nbd.name>