aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* apm821xx: MR24: convert to interrupt-driven gpio-key driverChristian Lamparter2019-06-021-5/+3
| | | | | | | This patch converts the device to use the gpio-key over gpio-key-polled driver. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: WNDAP6X0: convert to interrupt-driven gpio-key driverChristian Lamparter2019-06-021-5/+2
| | | | | | | This patch converts the device to use the gpio-key over gpio-key-polled driver. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: fix QCA955x GMAC register sizeDavid Bauer2019-06-021-1/+1
| | | | | | | | The register size of the QCA955x currently matches the size stated in the datasheet. However, there are more hidden GMAC registers which are needed for the SGMII workaround to work. Signed-off-by: David Bauer <mail@david-bauer.net>
* wireguard: bump to 0.0.20190601Jason A. Donenfeld2019-06-011-2/+2
| | | | | | | | | | | | | | There was an issue with the backport compat layer in yesterday's snapshot, causing issues on certain (mostly Atom) Intel chips on kernels older than 4.2, due to the use of xgetbv without checking cpu flags for xsave support. This manifested itself simply at module load time. Indeed it's somewhat tricky to support 33 different kernel versions (3.10+), plus weird distro frankenkernels. If OpenWRT doesn't support < 4.2, you probably don't need to apply this. But it also can't hurt, and probably best to stay updated. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* wireguard: bump to 0.0.20190531Jason A. Donenfeld2019-05-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * tools: add wincompat layer to wg(8) Consistent with a lot of the Windows work we've been doing this last cycle, wg(8) now supports the WireGuard for Windows app by talking through a named pipe. You can compile this as `PLATFORM=windows make -C src/tools` with mingw. Because programming things for Windows is pretty ugly, we've done this via a separate standalone wincompat layer, so that we don't pollute our pretty *nix utility. * compat: udp_tunnel: force cast sk_data_ready This is a hack to work around broken Android kernel wrapper scripts. * wg-quick: freebsd: workaround SIOCGIFSTATUS race in FreeBSD kernel FreeBSD had a number of kernel race conditions, some of which we can vaguely work around. These are in the process of being fixed upstream, but probably people won't update for a while. * wg-quick: make darwin and freebsd path search strict like linux Correctness. * socket: set ignore_df=1 on xmit This was intended from early on but didn't work on IPv6 without the ignore_df flag. It allows sending fragments over IPv6. * qemu: use newer iproute2 and kernel * qemu: build iproute2 with libmnl support * qemu: do not check for alignment with ubsan The QEMU build system has been improved to compile newer versions. Linking against libmnl gives us better error messages. As well, enabling the alignment check on x86 UBSAN isn't realistic. * wg-quick: look up existing routes properly * wg-quick: specify protocol to ip(8), because of inconsistencies The route inclusion check was wrong prior, and Linux 5.1 made it break entirely. This makes a better invocation of `ip route show match`. * netlink: use new strict length types in policy for 5.2 * kbuild: account for recent upstream changes * zinc: arm64: use cpu_get_elf_hwcap accessor for 5.2 The usual churn of changes required for the upcoming 5.2. * timers: add jitter on ack failure reinitiation Correctness tweak in the timer system. * blake2s,chacha: latency tweak * blake2s: shorten ssse3 loop In every odd-numbered round, instead of operating over the state x00 x01 x02 x03 x05 x06 x07 x04 x10 x11 x08 x09 x15 x12 x13 x14 we operate over the rotated state x03 x00 x01 x02 x04 x05 x06 x07 x09 x10 x11 x08 x14 x15 x12 x13 The advantage here is that this requires no changes to the 'x04 x05 x06 x07' row, which is in the critical path. This results in a noticeable latency improvement of roughly R cycles, for R diagonal rounds in the primitive. As well, the blake2s AVX implementation is now SSSE3 and considerably shorter. * tools: allow setting WG_ENDPOINT_RESOLUTION_RETRIES System integrators can now specify things like WG_ENDPOINT_RESOLUTION_RETRIES=infinity when building wg(8)-based init scripts and services, or 0, or any other integer. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* ramips: create R6220 dtsi and improve WNDR3700v5 supportJan Hoffmann2019-05-316-207/+166
| | | | | | | | | | | | | | | | | | The R6220 and WNDR3700v5 are identical apart from using NAND/NOR flash and having a different casing. This adds a new cleaned up R6220.dtsi with the common bits for both devices. Both devices now have feature parity. Performed cleanup: * generic DTS node names * regulator for usb power * added missing pinctrl groups * use switch port instead of VLAN as trigger for WAN LED Fixes for WNDR3700v5: * all LEDS work * correct ethernet MAC addresses Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* ramips: add support for Xiaomi Mi Router 4A (100M Edition)Markus Scheck2019-05-313-0/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - SoC: MediaTek MT7628AN - Flash: 16MB (Winbond W25Q128JV) - RAM: 64MB - Serial: As marked on PCB, 3V3 logic, baudrate is 115200 - Ethernet: 3x 10/100 Mbps (switched, 2x LAN + WAN) - WIFI0: MT7628AN 2.4GHz 802.11b/g/n - WIFI1: MT7612EN 5GHz 802.11ac - Antennas: 4x external (2 per radio), non-detachable - LEDs: Programmable power-LED (two-colored, yellow/blue) Non-programmable internet-LED (shows WAN-activity) - Buttons: Reset INSTALLATION: 1. Connect to the serial port of the router and power it up. If you get a prompt asking for boot-mode, go to step 3. 2. Unplug the router after > Erasing SPI Flash... > raspi_erase: offs:20000 len:10000 occurs on the serial port. Plug the router back in. 3. At the prompt select option 2 (Load system code then write to Flash via TFTP.) 4. Enter 192.168.1.1 as the device IP and 192.168.1.2 as the Server-IP. 5. Connect your computer to LAN1 and assign it as 192.168.1.2/24. 6. Rename the sysupgrade image to test.bin and serve it via TFTP. 7. Enter test.bin on the serial console and press enter. Signed-off-by: Markus Scheck <markus@mscheck.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added mt76 compatible]
* build: add support to && in DEPENDSEneas U de Queiroz2019-05-312-3/+20
| | | | | | | | | | | | Adds support to && operand in DEPENDS. Also, fixes generation of || dependencies by scripts/package-metadata.pl. The precedence order from higher to lower is && then ||. Use of parentheses to change the order is not supported. As before, they are silently ignored. Use them for readability only. Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [DMARC removal]
* openssl: update to version 1.1.1cEneas U de Queiroz2019-05-312-34/+3
| | | | | | | | | | | Highlights of this version: - Prevent over long nonces in ChaCha20-Poly1305 (CVE-2019-1543) - Fix OPENSSL_config bug (patch removed) - Change the default RSA, DSA and DH size to 2048 bit instead of 1024. - Enable SHA3 pre-hashing for ECDSA and DSA Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [DMARC removal]
* ath79: add leds migrations for archer-c7-v2 and v4David Santamaría Rogado2019-05-311-0/+6
| | | | | | | | | | | | In ar71xx v2 has blue color defined because the same mach-*.c is also used for TL-WDR4900 model with blue leds. ath79 v2 dts defines them as green. For v4 the situation is the same as v5 so the conversion is identical only v4 instead v5. So now upgrading from ar71xx to ath79 should be also smoother for v2 and v4. Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
* ramips: add CUDY WR1000 supportDavide Fioravanti2019-05-314-0/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cudy WR1200 is an AC1200 AP with 3-port FE and 2 non-detachable antennas Specifications: MT7628 (580 MHz) 64 MB of RAM (DDR2) 8 MB of FLASH 2T2R 2.4 GHz (MT7628) 2T2R 5 GHz (MT7612E) 3x 10/100 Mbps Ethernet (2 LAN + 1 WAN) 2x external, non-detachable antennas (5dbi) UART header on PCB (57600 8n1) 7x LED, 2x button Known issues: The Power LED is always ON, probably because it is connected directly to power. Flash instructions ------------------ Load the ...-factory.bin image via the stock web interface. Openwrt upgrade instructions ---------------------------- Use the ...-sysupgrade.bin image for future upgrades. Revert to stock FW ------------------ Warning! This tutorial will work only with the following OEM FW: WR1000_EU_92.122.2.4987.201806261618.bin WR1000_US_92.122.2.4987.201806261609.bin If in the future these firmwares will not be available anymore, you have to find the new XOR key. 1) Download the original FW from the Cudy website. (For example WR1000_EU_92.122.2.4987.201806261618.bin) 2) Remove the header. dd if="WR1000_EU_92.122.2.4987.201806261618.bin" of="WR1000_EU_92.122.2.4987.201806261618.bin.mod" skip=8 bs=64 3) XOR the new file with the region key. FOR EU: 7B76741E67594351555042461D625F4545514B1B03050208000603020803000D FOR US: 7B76741E675943555D5442461D625F454555431F03050208000603060007010C You can use OpenWrt's tools/firmware-utils/src/xorimage.c tool for this: xorimage -i WR1000..bin.mod -o stock-firmware.bin -x -p 7B767.. Or, you can use this tool (CHANGE THE XOR KEY ACCORDINGLY!): https://gchq.github.io/CyberChef/#recipe=XOR(%7B'option':'Hex','string':''%7D,'',false) 4) Check the resulting decrypted image. Check if bytes from 0x20 to 0x3f are: 4C 69 6E 75 78 20 4B 65 72 6E 65 6C 20 49 6D 61 67 65 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Alternatively, you can use u-boot's tool dumpimage tool to check if the decryption was successful. It should look like: # dumpimage -l stock-firmware.bin Image Name: Linux Kernel Image Created: Tue Jun 26 10:24:54 2018 Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 4406635 Bytes = 4303.35 KiB = 4.20 MiB Load Address: 80000000 Entry Point: 8000c150 5) Flash it via forced firmware upgrade and don't "Keep Settings" CLI: sysupgrade -F -n stock-firmware.bin LuCI: make sure to click on the "Keep settings" checkbox to disable it. You'll need to do this !TWICE! because on the first try, LuCI will refuse the image and reset the "Keep settings" to enable. However a new "Force upgrade" checkbox will appear as well. Make sure to do this very carefully! Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added wifi compatible, spiffed-up the returned to stock instructions]
* ramips: unify JCG helper command definitionDavide Fioravanti2019-05-312-5/+6
| | | | | | | This patch makes the JCG helper command definition available for every rampis target Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* firmware-utils: jcgimage: add support for 4MiB+ imagesDavide Fioravanti2019-05-311-5/+19
| | | | | | | | | | | | | The first version of this script allowed just 4Mb factory images. With this patch is possible to set the maximum size of the payload. For an 8Mb flash, the corresponding maxsize is: 8 * 1024 * 1024 - 5 * 64 * 1024 = 8388608 - 327680 = 8060928 If the -m argument is not set, the default maximum size will be used for backward compatibility. Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* firmware-utils: jcgimage: fix style and compiler warningsDavide Fioravanti2019-05-311-48/+46
| | | | | | Fixed some compilation warnings. Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* apm821xx: wndr4700: interrupt-driven gpio-keysChristian Lamparter2019-05-311-14/+6
| | | | | | | | | | | | This patch fixes the active_low setting and converts all of the physical keys on the wndr4700 to utilize the interrupt-driven gpio-keys driver over the polled version. The sdcard-insertion hack has been removed since the block-subsystem will now be polling the device instead. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* gpio-button-hotplug: support interrupt propertiesChristian Lamparter2019-05-311-21/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upstream Linux's input gpio-keys driver supports specifying a external interrupt for a gpio via the 'interrupts' properties as well as having support for software debounce. This patch ports these features to OpenWrt's event version. Only the "pure" interrupt-driven support is left behind, since this goes a bit against the "gpio" in the "gpio-keys" and I don't have a real device to test this with. This patch also silences the generated warnings showing up since 4.14 due to the 'constification' of the struct gpio_keys_button *buttons variable in the upstream struct gpio_keys_platform_data declaration. gpio-button-hotplug.c: In function 'gpio_keys_get_devtree_pdata': gpio-button-hotplug.c:392:10: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] button = &pdata->buttons[i++]; ^ gpio-button-hotplug.c: In function 'gpio_keys_button_probe': gpio-button-hotplug.c:537:12: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] bdata->b = &pdata->buttons[i]; ^ gpio-button-hotplug.c: In function 'gpio_keys_probe': gpio-button-hotplug.c:563:37: warning: initialization discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] struct gpio_keys_button *button = &pdata->buttons[i]; ^ Acked-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ppp: add config options to tune discovery timeout and attemptsHans Dedecker2019-05-312-1/+8
| | | | | | | | | | | Upstream PPP project has added in commit 8e77984 options to tune discovery timeout and attempts in the rp-pppoe plugin. Expose these options in the uci datamodel for pppoe: padi_attempts: Number of discovery attempts padi_timeout: Initial timeout for discovery packets in seconds Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ppp: update to version 2.4.7.git-2019-05-25Hans Dedecker2019-05-311-3/+3
| | | | | | 8e77984 rp-pppoe plugin: Add options to tune discovery timeout and number of attempts Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* gre: introduce 'nohostroute' optionFabian Bläse2019-05-312-5/+11
| | | | | | | | | | | It is not always necessary to add a host route for the gre peer address. This introduces a new config option 'nohostroute' (similar to the option introduced for wireguard in d8e2e19) to allow to disable the creation of those routes explicitely. Signed-off-by: Fabian Bläse <fabian@blaese.de> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* uclient: bump to version 2019-05-30Yousong Zhou2019-05-301-3/+3
| | | | | | | | This version bump contains the following commit to fix FS#2222 3b3e368 uclient-http: set data_eof when content-length is 0 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* libunwind: requires glibc if arch in powerpcYousong Zhou2019-05-301-1/+1
| | | | | | | | | | | | | | libunwind for powerpc depends on getcontext() from libc which musl-libc does not provide because this API and its friends are supposed to be "obsolescent" [1,2] [1] Subject: Re: setcontext/getcontext/makecontext missing? https://www.openwall.com/lists/musl/2016/02/04/5 [2] http://pubs.opengroup.org/onlinepubs/009695399/functions/makecontext.html Refs: https://github.com/openwrt/packages/issues/8548#issuecomment-497200058 Reported-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* at91:renaming subtraget legacy to sam9xSandeep Sheriker M2019-05-307-14/+14
| | | | | | renaming subtraget legacy to sam9x for adding new sam9 soc's Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* gemini: Activate Realtek and vitesse DSA driver againHauke Mehrtens2019-05-301-0/+2
| | | | | | | | This activates the wrongly removed DSA drivers again. Fixes 9ab4d74b5f86 ("kernel: Move some DSA config options to generic config") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Linus Walleij <linus.walleij@linaro.org>
* at91: Update kernel to version 4.14Hauke Mehrtens2019-05-3011-912/+48
| | | | | | | | This adds support for kernel 4.14 to the target and directly make it the default kernel version to use. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Sandeep Sheriker <sandeepsheriker.mallikarjun@microchip.com>
* at91: Merge SAMA5 subtargetsHauke Mehrtens2019-05-3016-153/+111
| | | | | | | | | Instead of maintaining 3 very similar subtargets merge them into one. This does not use the Arm NEON extension any more, because the SAMA5D3 does not support NEON. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Sandeep Sheriker <sandeepsheriker.mallikarjun@microchip.com>
* at91: Clean up kernel configurationHauke Mehrtens2019-05-302-20/+1
| | | | | | | | This removes some settings which are normally set by the generic configuration and should not be changed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Sandeep Sheriker <sandeepsheriker.mallikarjun@microchip.com>
* at91: Refresh kernel configurationHauke Mehrtens2019-05-305-179/+65
| | | | | | | | | | | The configuration of the sama5d4 subtarget was used as the default configuration and then the subtarget configurations were adapted. The resulting kernel configuration without any extra modules selected is still the same. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Sandeep Sheriker <sandeepsheriker.mallikarjun@microchip.com>
* lantiq: BTHOMEHUBV5A: don't power off with restart buttonAlan Swanson2019-05-301-1/+1
| | | | | | | | | | | The restart button is currently assigned to KEY_POWER power script but an easily accessible button immediately powering off the device is undesirable. Switch to using new KEY_POWER2 reboot script with 5 second seen delay. Fixes: FS#1965 Signed-off-by: Alan Swanson <reiver@improbability.net> Signed-off-by: Petr Štetiar <ynezz@true.cz> [long line wrap]
* gpio-button-hotplug: add KEY_POWER2 handlingAlan Swanson2019-05-301-0/+1
| | | | | | | | | | | | | | | | For devices such as BTHOMEHUBV5A with both reset and restart buttons, its easily accessible restart button has been assigned to KEY_POWER power script to poweroff preventing accidental (or malicious) factory resets by KEY_RESTART reset script. However an easily accessible button immediately powering off the device is also undesirable. As KEY_RESTART is already used for reset script (and there's no KEY_REBOOT in Linux input events), use KEY_POWER2 for rebooting via new reboot script with 5 second seen delay. Fixes: FS#1965 Signed-off-by: Alan Swanson <reiver@improbability.net> Signed-off-by: Petr Štetiar <ynezz@true.cz> [long line wrap]
* button-hotplug: add KEY_POWER2 handlingAlan Swanson2019-05-301-0/+1
| | | | | | | | | | | | | | | | For devices such as BTHOMEHUBV5A with both reset and restart buttons, its easily accessible restart button has been assigned to KEY_POWER power script to poweroff preventing accidental (or malicious) factory resets by KEY_RESTART reset script. However an easily accessible button immediately powering off the device is also undesirable. As KEY_RESTART is already used for reset script (and there's no KEY_REBOOT in Linux input events), use KEY_POWER2 for rebooting via new reboot script with 5 second seen delay. Fixes: FS#1965 Signed-off-by: Alan Swanson <reiver@improbability.net> Signed-off-by: Petr Štetiar <ynezz@true.cz> [long line wrap]
* base-files: add reboot only button handlerAlan Swanson2019-05-301-0/+12
| | | | | | | | | | | | For devices such as BTHOMEHUBV5A with both reset and restart buttons, its easily accessible restart button has been assigned to KEY_POWER power script to poweroff preventing accidental (or malicious) factory resets by KEY_RESTART reset script. However an easily accessible button immediately powering off the device is also undesirable. Fixes: FS#1965 Signed-off-by: Alan Swanson <reiver@improbability.net> Signed-off-by: Petr Štetiar <ynezz@true.cz> [long line wrap]
* procd: update to latest git HEADPetr Štetiar2019-05-301-3/+3
| | | | | | | ade00ca585a4 container: fix .dockerenv stat check 385b904b2f0a hotplug: improve error message during group ownership change Signed-off-by: Petr Štetiar <ynezz@true.cz>
* procd: update to latest git HEADPaul Spooren2019-05-291-3/+3
| | | | | | 7f0f6b2 procd: add docker support Signed-off-by: Paul Spooren <mail@aparcar.org>
* busybox: fix: ip addr flush hangs when run by non-root userMikael Magnusson2019-05-282-1/+215
| | | | | | | | | | | | | Add upstream patch from: https://git.busybox.net/busybox/commit/?id=028c5aa18b5273c029f0278232d922ee1a164de6 The patch fixes a problem with an infinite loop causing 100% CPU usage when running the following command /lib/preinit/10_indicate_preinit without the CAP_NET_ADMIN capability (such as in Docker): ip -4 address flush dev $pi_ifname Signed-off-by: Mikael Magnusson <mikma@users.sourceforge.net> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patch]
* kernel: bump 4.19 to 4.19.45Koen Vandeputte2019-05-281-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.121Koen Vandeputte2019-05-281-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.178Koen Vandeputte2019-05-281-2/+2
| | | | | | | | | Refreshed all patches. Compile-tested on: ar7 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* netifd: fix missing ip rules after network reload (FS#2296)Hans Dedecker2019-05-281-3/+3
| | | | | | beb810d iprule: fix missing ip rules after a reload (FS#2296) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ath79: ecb1750: additional dts fixesPetr Štetiar2019-05-271-0/+2
| | | | | | | | | | | This patch fixes following missing bits: - add missing 'compatible' property on firmware partition - set vendor partition 'userconfig' read-only Fixes: 30dcbc741d84 ("ath79: add support for EnGenius ECB1750") Signed-off-by: Sven Friedmann <sf.openwrt@okay.ms> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath79: add support for WD My Net N750Ryan Mounce2019-05-275-7/+241
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: AR9344 RAM: 128MB Flash: 16MiB Winbond 25Q128BVFG SPI NOR 5GHz WiFi: AR9380 PCIe 3x3:3 802.11n 2.4GHz WiFi: AR9344 (SoC) AHB 2x2:2 802.11n 5x Gigabit ethernet via AR8327N switch (green + amber LEDs) 2x USB 2.0 via GL850G hub 4x front LEDs from SoC GPIO 1x front WPS button from SoC GPIO 1x bottom reset button from SoC GPIO Known issues: AR8327N LEDs only have default functionality, not presented in sysfs. This is a regression from ar71xx. UART header JP1, 115200 no parity 1 stop TX GND VCC (N/P) RX See https://openwrt.org/toh/wd/n750 for flashing detail. Procedures unchanged from ar71xx. Tested sysupgrade + factory flash from WD Emergency Recovery Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
* curl: bump to 7.65.0Hans Dedecker2019-05-261-2/+2
| | | | | | For changes in 7.65.0; see https://curl.haxx.se/changes.html#7_65_0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* map: don't set default firewall zone to wanHans Dedecker2019-05-262-23/+27
| | | | | | | | | | Don't set the default firewall zone to wan if not specified to keep the behavior aligned with other tunnel protocols like gre and 6rd. If the interface zone is not specified try to get it from the firewall config when constructing the procd firewall rule. While at it only add procd inbound/outbound firewall rules if a zone is specified. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* 464xlat: don't set default firewall zone to wanHans Dedecker2019-05-262-13/+17
| | | | | | | | | | Don't set the default firewall zone to wan if not specified to keep the behavior aligned with other tunnel protocols like gre and 6rd. If the interface zone is not specified try to get it from the firewall config when constructing the procd firewall rule. While at it only add a procd inbound firewall rule if a zone is specified. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ethtool: bump to 5.1Petr Štetiar2019-05-251-2/+2
| | | | | | | | | | | | | | | | | | | | * Feature: Add support for 200Gbps (50Gbps per lane) link mode * Feature: simplify handling of PHY tunable downshift * Feature: add support for PHY tunable Fast Link Down * Feature: add PHY Fast Link Down tunable to man page * Feature: Add a 'start N' option when specifying the Rx flow hash indirection table. * Feature: Add bash-completion script * Feature: add 10000baseR_FEC link mode name * Fix: qsfp: fix special value comparison * Feature: move option parsing related code into function * Feature: move cmdline_coalesce out of do_scoalesce * Feature: introduce new ioctl for per-queue settings * Feature: support per-queue sub command --show-coalesce * Feature: support per-queue sub command --coalesce * Fix: fix up dump_coalesce output to match actual option names * Feature: fec: add pretty dump Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "base-files: add console to inittab"Alexander Couzens2019-05-251-1/+0
| | | | | | | This reverts commit cde52cb4866fe8cf4a19bb2bb32ff7802e542e19. When using OpenWrt in qemu, the shell is unsuable Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* uci: fix heap use after free (FS#2288)Hans Dedecker2019-05-231-3/+3
| | | | | | f199b96 uci: fix options list of section after type change Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* glibc: update to latest 2.27 commit (BZ #24531)Hans Dedecker2019-05-231-2/+2
| | | | | | 54ba8bcd423 Fix tcache count maximum (BZ #24531) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* gemini: Support sysupgrade on DIR-685Linus Walleij2019-05-232-1/+28
| | | | | | | | | | | | | This makes sysupgrade work on the D-Link DIR-685 after initial factory install. We create the platform.sh script to support sysupgrade on more targets as we move on with sysupgrade support. Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Petr Štetiar <ynezz@true.cz> [cleanup in platform.sh, removed superfluous SUPPORTED_DEVICES]
* lua: lnum: fix strtoul based number parsingLiangbin Lian2019-05-233-1/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Lua's LNUM patch currently doesn't parse properly certain numbers as it's visible from the following simple tests. On x86_64 host (stock Lua 5.1.5, expected output): $ /usr/bin/lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)' 2147483648 8796093022208 4294967296 On x86_64 host: $ staging_dir/hostpkg/bin/lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)' -2147483648 0 0 On x86_64 target: $ lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)' -2147483648 0 0 On ath79 target: $ lua -e 'print(0x80000000); print(0x80000000000); print(0x100000000)' -2147483648 8796093022208 4294967296 It's caused by two issues fixed in this patch, first issue is caused by unhadled strtoul overflow and second one is caused by the cast of unsigned to signed Lua integer when parsing from hex literal. Run tested on: * Zidoo Z9S with RTD1296 CPU (aarch64_cortex-a53) * qemu/x86_64 * qemu/armvirt_64 * ath79 Signed-off-by: Liangbin Lian <jjm2473@gmail.com> [commit subject/message touches, fixed From to match SOB, fixed another unhandled case in luaO_str2i, host Lua, package bump] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "bc: update to 1.07.1"Hans Dedecker2019-05-222-15/+20
| | | | | | | | | This reverts commit 0111b86f1db501d57bfee8a313fe5bebdf8b2ed9 as it breaks on Linux distributions without ed support ./fix-libmath_h: line 1: ed: command not found Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 15:29:22 +0000