aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTBChuanhong Guo2019-07-089-86/+15
| | | | | | | | | | | | | | | | | Upstream kernel added support for RAW_APPENDED_DTB on ralink arch in the following commit: 02564fc89d3d ("ralink: Introduce fw_passed_dtb to arch/mips/ralink") Use upstream solution and get rid of our OWRTDTB hack. This commit set DEVICE_DTS to $$(DTS) instead of replacing DTS with DEVICE_DTS in device profile because DTS variable will be dropped in later commits. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [Tested on mt7621/mt76x8] Tested-by: Chuanhong Guo <gch981213@gmail.com> [Tested on rt305x/mt7620] Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* usbreset: Add missing headerRosen Penev2019-07-082-1/+2
| | | | | | Fixes undefined reference to strtoul Signed-off-by: Rosen Penev <rosenp@gmail.com>
* netsupport: move out mqprio from kmod-schedKonstantin Demin2019-07-081-1/+1
| | | | | | | | | | | | | Currently, there's unable to install "kmod-sched-mqprio" after "kmod-sched" (or vice versa), because "sch_mqprio.ko" is shipped in both packages. Fixes: f83522fa6361 ("linux: Add kmod-sched-mqprio") Fixes: 6af639e0bf78 ("linux: Add kmod-sched-act-vlan") Fixes: 72c7e2dc467c ("linux: Add kmod-sched-flower") Signed-off-by: Konstantin Demin <rockdrilla@gmail.com> [Add cls_flower and act_vlan] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* util-linux: Update to 2.34Daniel Engberg2019-07-082-5/+5
| | | | | | | Update util-linux to 2.34 Refresh patch Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/gengetopt: Update to 2.23Daniel Engberg2019-07-084-29/+38
| | | | | | | | | Update gengetopt to 2.23 Remove 100-dependency_fix.patch, fixed upstream Rework no tests and docs patch Fix typo in copyright section Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ath79: Add missing IMAGE_SIZE for Etactica EG200Adrian Schmutzler2019-07-081-0/+1
| | | | | | | The Etactica EG200 is the only device in ath79 despite nand target that lacks IMAGE_SIZE. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* zynq: convert to multi-variable device titleLuis Araneda2019-07-081-4/+8
| | | | | | | Use the newly introduced variables to better differentiate between vendor, model and revision Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* iperf3: update to 3.7DENG Qingfang2019-07-081-2/+2
| | | | Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* kmod-sched-cake: drop out of tree package, use kernel versionKevin Darbyshire-Bryant2019-07-086-42/+503
| | | | | | | | | | | | | | CAKE made it to kernel 4.19 and since OpenWrt now at kernel 4.19 we can drop the out of tree cake package in base repository. Add kmod-sched-cake to netsupport so package dependencies are still met. Similarly CAKE is retained as an optional qdisc module to avoid base scheduler package size implications. Backport upstream patches from k5.1 to address some small bugs and support fwmark usage. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* base-files: drop support for NAND upgrade in platform_pre_upgrade()Rafał Miłecki2019-07-084-17/+3
| | | | | | | With bcm53xx switched to the new procedure there is no more need for keeping that backward compatibility code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: sysupgrade: call nand_do_upgrade() from platform_do_upgrade()Rafał Miłecki2019-07-081-17/+12
| | | | | | | | | | | Calling nand_do_upgrade() from platform_pre_upgrade() was obsoleted in the commit 30f61a34b4cf ("base-files: always use staged sysupgrade"). This change brings bcm53xx in sync with other targets and allows dropping backward compatibility code. It shouldn't change any user visible behavior. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: drop unused jffs2_copy_config()Rafał Miłecki2019-07-082-11/+1
| | | | | | | | Its last usage was dropped back in 2013 in the commit b95bdc8ab56e ("kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: Add missing includes mtdsplit_*.cHauke Mehrtens2019-07-079-0/+9
| | | | | | | | | | | This fixes the following compile problem with kernel 4.9 on lantiq: drivers/mtd/mtdsplit/mtdsplit_uimage.c:244:34: error: array type has incomplete element type 'struct of_device_id' static const struct of_device_id mtdsplit_uimage_of_match_table[] = { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mtd/mtdsplit/mtdsplit_uimage.c:245:4: error: field name not in record or union initializer { .compatible = "denx,uimage" }, Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-firmware: Fix mirror hashHauke Mehrtens2019-07-071-1/+1
| | | | | Fixes: 7f79882d44ba ("ath10k-firmware: update board-2.bin for community firmwares") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Fix MIPS bounds check virt_addr_validHauke Mehrtens2019-07-072-0/+66
| | | | | | | | This is pending to get into the upstream kernel. This fixes a bug in the upstream kernel which was added to stable some time ago. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath79: increase kernel partition size for CPE610v1Andrew Cameron2019-07-073-6/+9
| | | | | | | | | Increase the Kernel partition to address the issue discussed here https://forum.openwrt.org/t/cpe610-v1-sysupgrade-bin-missing-too-big/39637/5 Switch Back to the okli Loader to support increased partition size Signed-off-by: Andrew Cameron <apcameron@softhome.net> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [add <> for e-mail]
* zram-swap: Add extra commands for status/compactionEmil Muratov2019-07-071-21/+34
| | | | | | | | | This patch adds two new commands: zram status - shows memory stats for all zram swaps zram compaction - trigger compaction for all zram swaps Signed-off-by: Emil Muratov <gpm@hotplug.ru> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* busybox: enable swapon/off by default to make it consistent with mkswapEmil Muratov2019-07-071-4/+4
| | | | | | | | | No size increase on busybox binary. Since busybox mkswap is already enabled by default it seems reasonable to enable swapon/off too. For ex. this obsoletes installing block-mount dependency for zram-swap. Signed-off-by: Emil Muratov <gpm@hotplug.ru>
* zram-swap: Add zram compaction and statistics info outputEmil Muratov2019-07-072-2/+58
| | | | | | | | | Executing '/etc/init.d/zram start' during runtime (with a swap being already mounted) triggers zram device compaction and prints out nice stats info about zram memory usage Signed-off-by: Emil Muratov <gpm@hotplug.ru> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [use IEC's MiB unit]
* zram-swap: Fix busybox dependency checkEmil Muratov2019-07-071-1/+1
| | | | | | | | - fix dependency on BUSYBOX_CONFIG_SWAPONOFF (removed in 84da2a6) - add busybox defaults checking (fix zram-swap always installs swap-utils and libblkid as dependency, even if busybox includes mkswap by default) Signed-off-by: Emil Muratov <gpm@hotplug.ru>
* gemini: Add SL93512r missing ImageInfo fileLinus Walleij2019-07-071-0/+18
| | | | | | | | | | | Somehow I missed to add the magical image cooking file for the SL93512r. Fix it. Fixes: 18e2053becb8 ("gemini: Add StorLink SL93512r images") Reported-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added Fixes, changed subject]
* gemini: Fix device name for StorLink SL93512rAdrian Schmutzler2019-07-071-1/+1
| | | | | | | | | This has been reported by Chen Minqiang (@ptpt52). Reported-by: Chen Minqiang <ptpt52@gmail.com> Fixes: 18e2053becb8 ("gemini: Add StorLink SL93512r images") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [Added tags]
* libnftnl: bump to version 1.1.3Konstantin Demin2019-07-071-3/+3
| | | | | | bump ABI version accordingly (thanks to Jo-Philipp Wich). Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
* ramips: Fix compatible for YUKAI Engineering BOCCOAdrian Schmutzler2019-07-071-1/+1
| | | | | | Looks like an undetected copy/paste error. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: Really check path in get_mac_binaryAdrian Schmutzler2019-07-071-1/+1
| | | | | | | | Currently, path argument is only checked for being not empty. This changes behavior to actually check whether path exists. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mpc85xx: Use gzip compressed kernel on HiveAP-330Pawel Dembicki2019-07-071-1/+1
| | | | | | | | | | | | | | | | | | | After commit 1e41de2f48 ("mpc85xx: convert TL-WDR4900 v1 to simpleImage") XZ compression of zImage was enabled. This change exposed a problem with the HiveAP-330 images, which was fixed by foregoing the compression on the kernel altogether with commit 98089bb8ba8 ("mpc85xx: Use uncompressed kernel on the HiveAP-330"). This patch adds back the gzip compression of the kernel image by utilizing the generic OpenWRT uImage method instead of relying on the PowerPC bootwrapper script that did it previously. Compile-tested: p1020/hiveap-330 Tested-by: Chris Blake <chrisrblake93@gmail.com> [run-tested] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [filled in even more text]
* hostapd: adjust removed wolfssl optionsEneas U de Queiroz2019-07-071-4/+0
| | | | | | | | | This edjusts the selection of recently removed wolfssl options which have always been built into the library even in their abscence. Also remove the selection of libwolfssl itself, allowing the library to be built as a module. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* wolfssl: update to 4.0.0-stableEneas U de Queiroz2019-07-075-126/+62
| | | | | | | | | | | | | | | Removed options that can't be turned off because we're building with --enable-stunnel, some of which affect hostapd's Config.in. Adjusted the title of OCSP option, as OCSP itself can't be turned off, only the stapling part is selectable. Mark options turned on when wpad support is selected. Add building options for TLS 1.0, and TLS 1.3. Add hardware crypto support, which due to a bug, only works when CCM support is turned off. Reorganized option conditionals in Makefile. Add Eneas U de Queiroz as maintainer. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* wolfssl: update to 3.15.7, fix MakefileEneas U de Queiroz2019-07-074-13/+13
| | | | | | | | | This includes a fix for a medium-level potential cache attack with a variant of Bleichenbacher’s attack. Patches were refreshed. Increased FP_MAX_BITS to allow 4096-bit RSA keys. Fixed poly1305 build option, and some Makefile updates. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* ath10k-firmware: update board-2.bin for community firmwaresChristian Lamparter2019-07-071-3/+3
| | | | | | | | This patch updates the board-2.bin for the default IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct and -ct-htt firmwares. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* toolchain: Don't force GCC8 on ARCRosen Penev2019-07-071-1/+1
| | | | | | | | This prevents overriding it to use GCC9. Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [changed logic to not fall back on 7.4]
* gdb-arc: RemoveRosen Penev2019-07-074-158/+0
| | | | | | Normal GDB has supported ARC since 8.0 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* gdb: Remove !arc dependencyRosen Penev2019-07-072-3/+14
| | | | | | | | Supported since 8.0. Added uClibc-ng patch. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: 4.19: Backport usb dwc2 lpm mode hw checkMartin Schiller2019-07-072-1/+64
| | | | | | | | | | | | | | This patch backports verbatim the commit from Linux 5.2-rc7 that fixes the warnings about invalid lpm related parameters on hardware which don't that. This is the case for e.g. lantiq xrx200 targets. Supported only in Linux 4.17 an later. Signed-off-by: Martin Schiller <ms@dev.tdt.de> [refresh patches, fix commit title] Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix etop compiler warningsMathias Kresin2019-07-072-10/+14
| | | | | | | | | | | | | | The following warnings are introduced by our own patches: lantiq_etop.c:173:1: warning: no semicolon at end of struct or union }; ^ lantiq_etop.c: In function 'ltq_etop_change_mtu': lantiq_etop.c:725:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN; ^~~ Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: use generic node namesPetr Štetiar2019-07-0765-161/+155
| | | | | | | | | | | | | | | | | | In DTS Checklist[1] we're now demanding proper generic node names, as the name of a node should reflect the function of the device and use generic name for that[2]. Everybody seems to be copy&pasting from DTS files available in the repository today, so let's unify that naming there as well and provide proper examples. 1. https://openwrt.org/submitting-patches#dts_checklist 2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation Signed-off-by: Petr Štetiar <ynezz@true.cz> [split out treewide patch, integrated P2812HNUF1 rename patch] Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [merged key and led changes, use generic node name for flash, wifi and gpio] Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: drop falcon clock nodeMathias Kresin2019-07-071-26/+0
| | | | | | | | | It is pretty ovbious a misuse of the simple-bus binding as no child has a address. Luckly the clock node isn't used at all so it is safe to get rid of it. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: drop empty falcon devicetree nodeMathias Kresin2019-07-071-6/+2
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: fix unit address mismatch warningMathias Kresin2019-07-071-2/+2
| | | | | | | | | Set a unit address matching the reg property for the EASY98000 ethernet node. Fixes a unit mismatch devicetree compiler warning. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: move localbus childs to dtsMathias Kresin2019-07-079-52/+80
| | | | | | | | The localbus childs are highly board specific and need to be part of the board dts. Otherwise we run into duplicate unit address issues if a board has something else (NAND) connected to the bus id. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: fix vmmc unit and register addressMathias Kresin2019-07-072-3/+3
| | | | | | | | | | The register address is the same for danube und vr9. The register size is 0x400 byte for danube and 0x300 byte for vr9. The change doesn't have an impact as the vmmc driver doesn't use the devicetree and has hardcoded register offsets. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: use lower case for hex valuesMathias Kresin2019-07-075-42/+42
| | | | | | Use only lower case for hex values to keep it consistent. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: drop superfluous address and size cellsMathias Kresin2019-07-0752-172/+3
| | | | | | | | Fixes the following devicetree compiler warning: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: move partitions into partition nodeMathias Kresin2019-07-074-88/+103
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: add missing size and address cellsMathias Kresin2019-07-074-0/+8
| | | | | | | | | | Add size and address cells where missing to fix the following devicetree compiler warning: Warning (avoid_default_addr_size): Relying on default #address-cells value Warning (avoid_default_addr_size): Relying on default #size-cells value Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: fix size cellsMathias Kresin2019-07-0711-11/+11
| | | | | | SPI nodes only need an address and no size. Drop the size everywhere. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: fix malformed unit addressesMathias Kresin2019-07-071-1/+1
| | | | | | | | Fixes: Warning (unit_address_format): unit name should not have leading "0x" Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: drop superfluous unit addressMathias Kresin2019-07-0720-68/+48
| | | | | | | | | | | | | The cpu temperature driver has the register offset hardcode and doesn't need a reg. The mdio bus node is only used as a well known name and doesn't need a reg or unit address. syscon-reboot doesn't have a unit address or a reg either. The unit name collides with reset-controller@10 anyway. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: add reg if unit address is setMathias Kresin2019-07-075-0/+29
| | | | | | | | | Add the reg property if the node has an unit address. Fixes the following device tree compiler warning: Warning (unit_address_vs_reg): node has a unit name, but no reg property Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: dts: move memory node to board dtsMathias Kresin2019-07-0747-16/+43
| | | | | | | The memory node is highly board specific and should be only defined in the board dts. Signed-off-by: Mathias Kresin <dev@kresin.me>