aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* uboot-sunxi: bump again to 2017.11Zoltan HERPAI2018-03-2111-392/+36
| | | | | | | | | | | | | | | Runtime-tested on: - Pine64 (A64) - Orange Pi 2 (H3) - Bananapro (A20) - Olimex A20-Micro (A20) - Pcduino v3 (A20) - Pcduino v2 (A10) Compile-tested on: - all A8/A7/A53 boards Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* kernel: b53: fix compilation on BCM47XXRafał Miłecki2018-03-211-0/+2
| | | | | | | | | This fixes: drivers/net/phy/b53/b53_priv.h:325:2: error: enumeration value '<board>' not handled in switch [-Werror=switch] errors. Fixes: 0de2213eeade7 ("kernel: b53: look for NVRAM's "robo_reset" entry on every platform") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: backport brcmfmac fixes from 4.16Rafał Miłecki2018-03-218-3/+345
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: b53: look for NVRAM's "robo_reset" entry on every platformRafał Miłecki2018-03-211-6/+8
| | | | | | | | | | Since kernel 4.1 bcm47xx_nvram_gpio_pin() is now defined in a global header and can be safely called even on non-Broadcom platforms. This change makes b53 look for "robo_reset" on ARCH_BCM_5301X and slightly simplifies the code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kirkwood: fix initramfs boot warning on iconnectPaul Wassi2018-03-202-2/+20
| | | | | | | | | | The chosen dts configuration linux,initrd-* gives an error message on bootup of kirkwood-iconnect. Since initramfs/initrd is not used remove these options from the dts. Reported-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* kirkwood: switch to kernel 4.14Paul Wassi2018-03-201-1/+1
| | | | Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* kirkwood: add kernel 4.14 supportPaul Wassi2018-03-2015-0/+1524
| | | | | | | | | Add patches for 4.14, undoing upstream changes for Linksys devices regarding DSA. Instead, the switchdev driver marvell,88e6171 is used. Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net> Tested-by: Alberto Bursi <alberto.bursi@outlook.it> Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* uboot-kirkwood: update to 2018.03Paul Wassi2018-03-2010-218/+120
| | | | | | | | | | | U-Boot now requires GCC > 5 Catch up with upstream and move some configuration options from the header files to the corresponding defconfig files. Also move some options of patch 010 affecting the whole platform to 010's device only. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* openvpn: remove deprecated config optionsHans Dedecker2018-03-202-8/+1
| | | | | | | | Remove deprecated config options in 2.5 as described in [0] [0] https://community.openvpn.net/openvpn/wiki/DeprecatedOptions Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mvebu: disable cpu idle on WRT1900ACv1Felix Fietkau2018-03-191-0/+10
| | | | | | | | | | | | | | | A regression seriously affecting the Linksys WRT1900ACv1 (Mamba) was introduced some time between the OpenWrt/LEDE v4.4 and v4.9 kernels. The root cause has not yet been identified, despite many attempts for more than a year. Disabling the SoC specific CPU idle support should mitigate this issue. The symptoms on an affected system are unwanted reboots at a variable frequency. In many cases almost immediately after boot, causing a bootloop. This effectively disables support for Mamba on OpenWrt with kernels > v4.4. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: avoid changing skb truesize in A-MSDU aggregationFelix Fietkau2018-03-191-9/+1
| | | | | | Should fix recently reported data corruption issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iproute2: fix hidden uint to uin64_t promotion in json_printKevin Darbyshire-Bryant2018-03-192-1/+66
| | | | | | | | | | | | | | | | | | | | | | | | | print_int used 'int' type internally, whereas print_uint used 'uint64_t' These helper functions eventually call vfprintf(fp, fmt, args) which is a variable argument list function and is dependent upon 'fmt' containing correct information about the length of the passed arguments. Unfortunately print_int v print_uint offered no clue to the programmer that internally passed ints to print_uint were being promoted to 64bits, thus the format passed in 'fmt' string vs the actual passed integer could be different lengths. This is even more interesting on big endian architectures where 'vfprintf' would be looking in the middle of an int64 type. Symptoms of this included tc qdisc showing bizarre values for a variety of fields across a variety of qdiscs (e.g. refcnt, flows, quantum) print_u/int now stick with native int size. A similar patch has been sent upstream. Fixes FS#1425 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: bump to 2.79 releaseKevin Darbyshire-Bryant2018-03-191-3/+3
| | | | | | | 94b6878 Tidy crypto.c of old library compat. Now need libnettle 3. 8b96552 Fix compiler warning. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* curl: Update to 7.59Rosen Penev2018-03-191-2/+2
| | | | | | Compile tested on ar71xx. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* firmware-utils: mkdlinkfw: compile as gnu99Mathias Kresin2018-03-191-1/+1
| | | | | | Compile as gnu99 to fix the build. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix DM200 boot with fake uImage headersThomas Nixon2018-03-181-0/+4
| | | | | | | | | | | | | | The latest bootloader versions load the firmware into memory and call `chk_dniimg` (defined in Netgear GPL release), which expects to find three consecutive block-aligned uImages. Add two fake uImage headers after the kernel to fool this check. This wastes up to 128k of space for alignment. The alternative would be to put the rootfs in a second uImage, but this would limit the firmware size to 0x710000 (the number of bytes loaded and verified by the bootloader) instead of 0x7b0000 (the size of the firmware partition). Signed-off-by: Thomas Nixon <tom@tomn.co.uk>
* lantiq: fix AVM initramfs imageValentin Spreckels2018-03-181-0/+1
| | | | | | Create an initramfs that can be used with the EVA bootloader. Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>
* ar71xx: fix Fritz 300e initramfs imageMathias Kresin2018-03-181-0/+1
| | | | | | Create an initramfs that can be used with the EVA bootloader. Signed-off-by: Mathias Kresin <dev@kresin.me>
* scripts: add EVA ramboot scriptValentin Spreckels2018-03-181-0/+37
| | | | | | | | | | | | Use the EVA bootloader to load a small linux system into the ram and boot it from there: ./scripts/flashing/eva_ramboot.py 192.168.178.1 path/to/initramfs-kernel.bin Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE> Acked-by: John Crispin <john@phrozen.org> [reworded commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for TP-Link TL-WR902AC v3Peter Lundkvist2018-03-186-0/+128
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router based on MediaTek MT7628N + MT7650E. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet * MT7650 ac chip isn't not supported by LEDE/OpenWrt at the moment. Therefore 5Ghz won' work. Flash instruction: The only way to flash LEDE image in TL-WR902AC v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-tplink_tl-wr902ac-v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with the LAN port, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com> [drop p2led_an pinmux, this pin isn't used as gpio, fix whitespace issues] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for D-Link DWR-116-A1/2Pawel Dembicki2018-03-1810-1/+175
| | | | | | | | | | | | | | | | | | | | | | | | | The DWR-116-A1/2 Wireless Router is based on the MT7620N SoC. Specification: MediaTek MT7620N (580 Mhz) 32 MB of RAM 8 MB of FLASH 802.11bgn radio 5x 10/100 Mbps Ethernet (1 WAN and 4 LAN) 2x external, non-detachable antennas UART (J1 in A1, JP1 in A2) header on PCB (57600 8n1) 6x LED (GPIO-controlled), 2x button JBOOT bootloader Known issues: WAN LED is drived by uartl tx pin. I decide to use this pin as uartlite tx pin. Installation: Apply factory image via http web-gui. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* firmware: add JBOOT based devices config extractorPawel Dembicki2018-03-184-0/+512
| | | | | | | Adds tool to extract MAC and pre-calibration data required for JBOOT based D-Link routers. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* firmware-utils: add JBOOT bootloader image supportPawel Dembicki2018-03-184-0/+921
| | | | | | | Tested on D-Link DWR-116. Based on mktplinkfw. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ltq-vdsl-mei: Fix section mismatchHauke Mehrtens2018-03-181-0/+20
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ltq-deu: Fix section mismatchesHauke Mehrtens2018-03-188-42/+42
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* e2fsprogs: fix InstallDev recipeJo-Philipp Wich2018-03-181-1/+1
| | | | | | Create the correct bin directory before staging the host utilities. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mtd: fix compile warningsHauke Mehrtens2018-03-182-4/+4
| | | | | | | This callback should have one parameter less, this parameter is not used so this was not a so big problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-mxs: fix compile problems related to OpenSSLHauke Mehrtens2018-03-172-1/+36
| | | | | | | | | | | | | | Use the UBOOT_MAKE_FLAGS defined in include/u-boot.mk and do not overwrite them to compile the host tools against the shipped LibreSSL. In addition add a patch to fix a compile problem when compiling the tools against LibreSSL caused by differences in the API between OpenSSL 1.1 and LibreSSL. This should fix the compile problems seen in build bot from time to time by not depending on the host libssl-dev package any more but using the LibreSSL version from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-mxs: refresh patchesHauke Mehrtens2018-03-171-26/+0
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: Disable internal RTC on Linksys devicesHauke Mehrtens2018-03-171-0/+28
| | | | | | | | | | The internal RTC does not work correctly on these Linksys boards based on Marvell SoCs. It is off by 3 minutes in 10 minutes running, this was reported by multiple users. On the Linksys Mamba device the device tree comment says that no crystal is connected to the internal RTC, this is probably also true for the other devices. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mvebu: Add Solidrun RTC init patch.Rosen Penev2018-03-171-0/+74
| | | | | | | | Some boards like the Turris Omnia have an RTC chip that does not get initialized. Initializing the RTC at the driver level helps get rid of bootloader hacks that write special register values. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mvebu: Backport RTC trimming support.Rosen Penev2018-03-171-0/+143
| | | | | | This enables a higher precision mode for the RTC. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* sunxi: update Xunlong Orange Pi Zero Plus dts fileHauke Mehrtens2018-03-171-56/+48
| | | | | | This updates the DTS file to the version send upstream Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.14 to 4.14.27Stijn Segers2018-03-1718-98/+38
| | | | | | | | | | * Refreshed patches. * Deleted 812-pci-dwc-fix-enumeration.patch (was accepted upstream) Compile-tested: ramips/mt7621, x86/64 Run-tested: ramips/mt7621, x86/64 Signed-off-by: Stijn Segers <foss@volatilesystems.org>
* kernel: bump 4.4 to 4.4.121Koen Vandeputte2018-03-176-19/+19
| | | | | | | | | - Refreshed all patches - Only compile-tested Compile tested on: Gemini Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.87Koen Vandeputte2018-03-1712-19/+19
| | | | | | | | | - Refreshed all patches Compile tested on: ar71xx Runtime tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mwlwifi: Updated to upstream stable releaseGabe Rodriguez2018-03-172-95/+3
| | | | | | | | | | | mwlwifi was updated to a new stable. Included in this stable release are the followin benefits: - Fixed compiling for kernel 4.14 - Fixed crash on 88W8864 binary Compiled and tested on: WRT3200ACM and WRT1900AC Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
* generic: revert broken LED core patchMatthias Schiffer2018-03-171-0/+26
| | | | | | | | The patch breaks LED operation and has already been reverted in 4.4.121. 4.9.87 is still affected; revert it locally until the issue is sorted out upstream. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* openvpn: add config param verify_client_certChristian Bayer2018-03-172-1/+2
| | | | | | | | | Option --client-cert-not-required DEPRECATED is deprecated in v2.4 and removed in OpenVPN 2.5. Replaced by param --verify-client-cert none|optional|require in v2.4 see https://community.openvpn.net/openvpn/wiki/ DeprecatedOptions#a--client-cert-not-required Signed-off-by: Christian Bayer <cave@cavebeat.org> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_ RELEASE increase]
* ipq40xx: fix GL.iNet GL-B1300Mathias Kresin2018-03-172-319/+0
| | | | | | | | | | | The deletion of the mdio node childs was meant for testing and were committed accidentally. Without the mdio nodes the network isn't initialised. While at it, remove the orphaned qcom-ipq4019-gl-b1300.dts as well. Fixes: FS#1439 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ipq40xx: add support for Compex WPJ428Sven Eckelmann2018-03-176-1/+308
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * QCA IPQ4028 * 256 MB of RAM * 32 MB of SPI NOR flash (mx25l25635e) * 128 MB of SPI NAND flash (gd5f1gq4ucy1g) * 2T2R 2.4 GHz - QCA4019 hw1.0 (SoC) - uses AP-DK03 BDF from QCA4019/hw1.0/board-2.bin * 2T2R 5 GHz - QCA4019 hw1.0 (SoC) - uses AP-DK03 BDF from QCA4019/hw1.0/board-2.bin * 2 fully software controllable GPIO-LEDs * 2 additional GPIO-LEDs which also affect the SIM card detection * 1x button (reset) * 1x GPIO buzzer * 1x USB (xHCI) * 1x NGFF (USB-only with Dual-SIM support, untested) * TTL pins are on board (R124 is next to GND, then follows: RX, TX, VCC) * 2x gigabit ethernet - phy@mdio4: + Manual: Ethernet port 0 + gmac0 (ethaddr) in original firmware + 802.3af POE (HV version) + 24v passive POE (LV version) - phy@mdio3: + Manual: Ethernet port 1 + gmac1 (eth1addr) in original firmware * DC Jack connector + 24-56V (HV version) + 12-24V (LV version) The SPI NAND flash isn't supported at the moment. The bootloader has to be updated before OpenWrt is installed to fix a reboot problem. The nor-ipq40xx-single.img from https://downloads.compex.com.sg/?dir=uploads/QSDK/QCA-Reference/WPJ428/b170123-IPQ40xx-Reference-Firmware has to be downloaded and the transfered in u-boot via TFTP set ipaddr 192.168.1.11 set serverip 192.168.1.10 ping ${serverip} tftpboot 0x84000000 nor-ipq40xx-single.img imgaddr=0x84000000 && source $imgaddr:script The sysupgrade image can be installed directly on flash using u-boot: sf probe tftpboot 0x84000000 openwrt-ipq40xx-compex_wpj428-squashfs-sysupgrade.bin sf erase 0x00180000 +$filesize sf write 0x84000000 0x00180000 $filesize bootipq The initramfs image can be started using tftpboot 0x82000000 openwrt-ipq40xx-compex_wpj428-initramfs-fit-uImage.itb set fdt_high 0x83000000 bootm 0x82000000 The used SIM card slot can be changed using # slot 1 (also enables orange LED) echo 1 > /sys/class/gpio/gpio3/value # slot 2 echo 0 > /sys/class/gpio/gpio3/value It can be checked whether a SIM card is inserted in the current slot and the red LED is subsequently on via: echo 2 > /sys/class/gpio/export cat /sys/class/gpio/gpio2/value Signed-off-by: Sven Eckelmann <sven@narfation.org>
* build: Allow to change the FIT config section nameSven Eckelmann2018-03-173-6/+11
| | | | | | | | Some devices only boot when a special config is found in the image and completely ignore the default entry during the selection. These devices can now use the variable DEVICE_DTS_CONFIG in their device image definition. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ramips: fix switch for Nexx devicesINAGAKI Hiroshi2018-03-171-5/+8
| | | | | | | | | | | | | | | | | There are 2 ethernet ports on Nexx WT1520 and WT3020. These ethernet ports are assigned as follows, and other ports cannot be used. - WT1520: - port0 -> lan - port4 -> wan - WT3020: - port0 -> wan - port4 -> lan I dropped ports that cannot be used. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* build: revert "make image target wait for initramfs"Christian Lamparter2018-03-151-1/+1
| | | | | | | | | | | This reverts commit 43be5087a915727e7dcb3459e2221f094c70811b. The change is incompatible with the image builder code. Luckily the RT-AC58U is no longer depending on the initramfs being available for the target's image generation rules. Reported-by: Venitex Aveon <aveon@aenote.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq-wifi: add board-2.bin for ASUS RT-AC58UMathias Kresin2018-03-151-0/+0
| | | | | | | The existing file is 0 byte. Replace the ASUS RT-AC58U board-2.bin with the correct file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: add support for Ubiquiti Litebeam M5Arne Zachlod2018-03-158-0/+78
| | | | | | | | | | | | | | | | | Specification: - SoC: Atheros AR9342 - Flash: 8 MiB - RAM: 64 MiB - UART: 1x UART on PCB - 115200 8N1 - Ethernet: 1 x 100 Mbit with passive PoE (24V/0.2A) Doesn't work: * Flash via TFTP with Ubiquiti Uboot Installation via vendor firmware: - upload factory image via webinterface Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
* firmware-utils: tplink-safeloader: compile as gnu99Alexander Couzens2018-03-152-5/+6
| | | | | | Also fix minor coding style issue and one redeclaration. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* firmware-utils: fix erroneous variable redeclarationJo-Philipp Wich2018-03-151-1/+0
| | | | | Fixes: 638e2193fe ("tplink-safeloader: add support to split & extract firmwares") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tplink-safeloader: add support to convert factory into sysupgradeAlexander Couzens2018-03-151-3/+103
| | | | | | | | | | | | Those converted factory images can be used to regain the original tp-link firmware. Be aware of firmware upgrade which additional require changes of other partition than os-image (kernel) & file-system (rootfs). OEM factory images from tplink can change nearly all partitions. However using those images, OpenWrt's sysupgrade will only modify the partitions os-image and file-system. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* tplink-safeloader: add support to split & extract firmwaresAlexander Couzens2018-03-151-17/+263
| | | | | | | Split the oem firmware upgrade images into seperate files. Useful when analysing oem firmware files. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>