aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* layerscape: build ls-dpl package with linux dtc toolYangbo Lu2018-09-221-0/+3
| | | | | | | | | Building ls-dpl package requires the dtc tool. This patch is to support using linux dtc tool for ls-dpl package. This avoids compile issue when host system doesn't have the dtc tool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: fix get_device_file() function of restoolYangbo Lu2018-09-221-0/+107
| | | | | | | | | | | | | | The restool failed to work with current gcc-7.3.0-musl. This patch is to add a restool fix-up patch to fix multiple problems encountered in the get_device_file() function: - The deprecated atoi() function is replaced by strtoul - An invalid memory access was being performed by using memory from dir->d_name even after closedir(). This is fixed by a strdup() on the device filename. - Also, error prints now print any relevant error code. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update README for SD card boot and new devicesYangbo Lu2018-09-221-100/+96
| | | | | | | This patch is to update the README since SD card boot support and LS1012AFRWY/LS1021ATWR were introduced. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add ls1012afrwy support and drop ls1012afrdmYangbo Lu2018-09-228-60/+64
| | | | | | | | | | | | | | | | | | | | | | | ls1012afrdm was no longer supported in NXP Layerscape SDK. Instead a new board ls1012afrwy was introduced in LSDK. This patch is to drop ls1012afrdm and add ls1012afrwy support. Since only 2MB NOR flash could be used, we just put u-boot and firmware on NOR flash, and put kernel/dtb/rootfs on SD card. The Layerscape FRWY-LS1012A board is an ultra-low-cost development platform for LS1012A Series Communication Processors built on Arm Cortex-A53. This tool refines the FRDM-LS1012A with more features for a better hands-on experience for IoT, edge computing, and various advanced embedded applications. Features include easy access to processor I/O, low-power operation, micro SD card storage, an M2 connector, a small form factor, and expansion board options via mikroBUS Click Module. The MicroBUS Module provides easy expansion via hundreds of powerful modules supporting sensors, actuators, memories, and displays. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add SD card boot supportYangbo Lu2018-09-2211-2/+191
| | | | | | | | | NOR/QSPI Flash on Layerscape board only has limited 64MB memory size. Since some boards (ls1043ardb/ls1046ardb/ls1088ardb/ls1021atwr) could support SD card boot, we added SD boot support for them to put all things on SD card to meet large memory requirement. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add armv7 subtarget and ls1021atwr board supportYangbo Lu2018-09-228-3/+1027
| | | | | | | | | | | | | | | | | | The NXP TWR-LS1021A module is a development system based on the QorIQ LS1021A processor. - This feature-rich, high-performance processor module can be used standalone or as part of an assembled Tower System development platform. - Incorporating dual Arm Cortex-A7 cores running up to 1 GHz, the TWR-LS1021A delivers an outstanding level of performance. - The TWR-LS1021A offers HDMI, SATA3 and USB3 connectors as well as a complete Linux software developer's package. - The module provides a comprehensive level of security that includes support for secure boot, Trust Architecture and tamper detection in both standby and active power modes, safeguarding the device from manufacture to deployment. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: split image makefile per subtargetYangbo Lu2018-09-223-185/+317
| | | | | | | | | | | | This patch is to split image makefile per subtarget. The ARMv7 subtarget will be added in the future. It will be not convinient if only one makefile is used for several subtargets management and future development. This patch also dropped 32-bit Traverse LS1043-S since Traverse only intended to support 64-bit and the 32-bit compile now had an issue. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define ls-append functionYangbo Lu2018-09-221-73/+50
| | | | | | | This patch is to define a ls-append function for each device to reuse it for image appending. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update linux 4.9 patches to LSDK-18.06Yangbo Lu2018-09-2223-12438/+23929
| | | | | | | This patch is to update linux 4.9 patches to LSDK-18.06 release and to adjust config-4.9 accordingly. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add u-boot environment support for OpenWrt bootYangbo Lu2018-09-229-7/+86
| | | | | | | This patch is to implement u-boot environment txt files to support OpenWrt boot for all layerscape devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update u-boot to LSDK-18.06Yangbo Lu2018-09-223-58/+92
| | | | | | | | | | | | | | The u-boot source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update u-boot to LSDK-18.06 for both uboot-layerscape and uboot-layerscape-armv8_32b packages. Besides, this patch also introduced some other changes. - Reworked uboot-layerscape makefile to make it more readable. - Define package in uboot-layerscape-armv8_32b for each board. - Fixed u-boot package selection in target image makefile. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: drop uboot-layerscape patchesYangbo Lu2018-09-226-320/+0
| | | | | | | | Dropped uboot-layerscape patches which were environemnt patches. We will make u-boot environment binaries with a txt file for all devices. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update restool to LSDK-18.06Yangbo Lu2018-09-221-6/+5
| | | | | | | | The restool source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update restool to LSDK-18.06 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-ppa to LSDK-18.06Yangbo Lu2018-09-221-73/+46
| | | | | | | This patch is to update ls-ppa to LSDK-18.06 release and to rework ls-ppa makefile to make it more readable. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-rcw to LSDK-18.06Yangbo Lu2018-09-224-181/+87
| | | | | | | | | | | | The rcw source code had been migrated to codeaurora for LSDK-18.06 release and the future release. The source code had also involved ls1012ardb/ls1012afrdm/ ls1088ardb/ls2088ardb rcw, so we updated ls-rcw to LSDK-18.06, reworked the makefile and dropped ls-rcw-bin package in this patch. Also reworked ls-rcw patch to adapt to the latest source code. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ppfe-firmware to LSDK-18.06Yangbo Lu2018-09-221-6/+4
| | | | | | This patch is to update ppfe-firmware to LSDK-18.06 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-mc to LSDK-18.06Yangbo Lu2018-09-221-13/+7
| | | | | | This patch is to update ls-mc to LSDK-18.06 release. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-dpl to LSDK-18.06Yangbo Lu2018-09-221-16/+12
| | | | | | | | | The dpl-examples source code had been migrated to codeaurora for LSDK-18.06 release and the future release. This patch is to update this package to LSDK-18.06. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update fman-ucode to LSDK-18.06Yangbo Lu2018-09-222-62/+24
| | | | | | | | | Actually there was no change for fman-ucode in LSDK-18.06 just tagged with LSDK-18.06. This patch is to rework the fman-ucode makefile to make it more readable, and to use lsdk-1806 as the PKG_VERSION. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* zynq: kernel: select FPGA-related configsLuis Araneda2018-09-221-0/+10
| | | | | | These configs are necessary to program the FPGA fabric Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* sunxi: build image/uboot for the NanoPi NEO2Jasper Scholte2018-09-222-0/+19
| | | | | | | | The NanoPi NEO2 is a small Allwinner H5 based board available with different DRAM configurations. This board is very similar to the NanoPi NEO PLUS2 Signed-off-by: Jasper Scholte <NightNL@outlook.com>
* kernel: generic: Fix nftables inet table breakageBrett Mastbergen2018-09-2231-42/+1230
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit b7265c59ab7d ("kernel: backport a series of netfilter cleanup patches to 4.14") added patch 302-netfilter-nf_tables_inet-don-t-use- multihook-infrast.patch. That patch switches the netfilter core in the kernel to use the new native NFPROTO_INET support. Unfortunately, the new native NFPROTO_INET support does not exist in 4.14 and was not backported along with this patchset. As such, nftables inet tables never see any traffic. As an example the following nft counter rule should increment for every packet coming into the box, but never will: nft add table inet foo nft add chain inet foo bar { type filter hook input priority 0\; } nft add rule inet foo bar counter This commit pulls in the required backport patches to add the new native NFPROTO_INET support, and thus restore nftables inet table functionality. Tested on Turris Omnia (mvebu) Fixes: b7265c59ab7d ("kernel: backport a series of netfilter cleanup ...") Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
* kernel: add Si7020 relative humidity/temperature sensor driverHartmut Knaack2018-09-221-0/+18
| | | | | | | Add support for the Silicon Labs Si7020 family of relative humidity and temperature sensors using the I2C bus. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
* kernel: add TSL4531 ambient light sensor driverHartmut Knaack2018-09-221-0/+18
| | | | | | | Add support for the TAOS TSL4531x family of ambient light sensors using the I2C bus. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
* ath79: Fix GL-AR300M USB triggerRobert Marko2018-09-221-1/+1
| | | | | | Correct a typo preventing USB trigger to work on AR300M. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ar71xx: flag FritzBox 4020 buttons as active lowDavid Bauer2018-09-221-2/+2
| | | | | | | | | Buttons of AVM FritzBox 4020 are incorrectly flagged as active high. This was an oversight as RFKill button was working as expected even with incorrectly flagged GPIO. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: flag FritzBox 4020 buttons as active lowDavid Bauer2018-09-221-2/+2
| | | | | | | | | Buttons of AVM FritzBox 4020 are incorrectly flagged as active high. This was an oversight as RFKill button was working as expected even with incorrectly flagged GPIO. Signed-off-by: David Bauer <mail@david-bauer.net>
* mbedtls: update to 2.13.0Magnus Kroken2018-09-221-2/+2
| | | | | | | | * Fixed a security issue in the X.509 module which could lead to a buffer overread during certificate extensions parsing. * Several bugfixes. * Improvements for better support for DTLS on low-bandwidth, high latency networks with high packet loss. Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* ath9k: add back support for using tx99 with active monitor interfacesFelix Fietkau2018-09-221-0/+96
| | | | | | Fixes controlling bitrate Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix tx queue allocation for active monitor interfacesFelix Fietkau2018-09-221-0/+26
| | | | | | Fixes a crash with drivers like ath9k Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: fix tx power issue for mt76x2Felix Fietkau2018-09-221-3/+3
| | | | | | 6e1898d mt76x2: fix tx power configuration for VHT mcs 9 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: re-enable MIPS VDSOKevin Darbyshire-Bryant2018-09-221-23/+0
| | | | | | | | | | | | | | kernel upstream commit 9efcaa7c4afba5628f2650a76f69c798f47eeb18 to 4.14 itself a backport of 0f02cfbc3d9e413d450d8d0fd660077c23f67eff has resolved the cache line issues that led to us disabling VDSO by default on MIPS. Remove our force disable patch: pending-4.14/206-mips-disable-vdso.patch Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* elfutils: bump to 0.174Luiz Angelo Daros de Luca2018-09-212-533/+7
| | | | | | - Simplified musl patch with error.h concentrated into system.h Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* toolchain/musl: update to version 1.1.20Christian Lamparter2018-09-216-88/+32
| | | | | | | | | | | | | | | | | | | | | | | This release introduces the ability to replace/interpose the allocator (malloc) subject to certain restrictions, adds an experimental m68k port, and makes notable improvements to stdio (application-provided buffers), getaddrinfo (AI_ADDRCONFIG, support for IPv4-only kernel configurations), the dynamic linker (safety against dlopen of libraries using initial-exec TLS model, reclaiming unused memory on FDPIC archs, better dladdr results), and handling of default thread stack size (pthread_setattr_default_np now works more reliably). Many bugs have been fixed, including potentially dangerous regressions in iconv (only for new conversions to legacy encodings) and visibly incorrect behavior in printf on non-x86 archs (%a format with precision specifier), in getopt_long_only when short options are a prefix for a long option, in complex arc-trig/hyperbolic functions, in strftime and mktime (timezone-specific issues), and numerous less-obvious places. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [altered commit msg a bit keeping it tight] Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.71Koen Vandeputte2018-09-2116-50/+50
| | | | | | | | | Refreshed all patches. Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.128Koen Vandeputte2018-09-212-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* dnsmasq: Change behavior when RD bit unset in queries.Kevin Darbyshire-Bryant2018-09-212-1/+55
| | | | | | | | | | | Backport upstream commit Change anti cache-snooping behaviour with queries with the recursion-desired bit unset. Instead to returning SERVFAIL, we now always forward, and never answer from the cache. This allows "dig +trace" command to work. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mwlwifi: driver version to 10.3.8.0-20180920Jonathan Lancett2018-09-201-3/+3
| | | | | | Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com> [minor tweak to commit title] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath9k: fix unloading the moduleFelix Fietkau2018-09-202-15/+10
| | | | | | | | | Registering a GPIO chip with the ath9k device as parent prevents unload, because the gpiochip core increases the module use count. Unfortunately, the only way to avoid this at the moment seems to be to register the GPIO chip without a parent device Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mdadm: Install /etc/config file as 600Rosen Penev2018-09-191-4/+5
| | | | | | | | | | | /etc/config/mdadm is only used by the init script which is ran as root. There is no need for it to be readable by anything else. Added PKG_CPE_ID for proper CVE tracking. Small reorganization for consistency between Makefiles. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* fstools: Install mount.hotplug and 10-fstab.defaults as 600Rosen Penev2018-09-191-4/+4
| | | | | | Both of these are used by programs that run as root and nothing else. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* usbmode: Update modeswitch data to 20170806Rosen Penev2018-09-191-5/+5
| | | | | | | Changed hotplug file to 600 as it is only read by procd, which runs as root. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* trelay: Install hotplug and config files as 600Rosen Penev2018-09-191-3/+3
| | | | | | | The hotplug file is ran by procd, which runs as root. The config file is used by the init script, which also runs as root. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* dropbear: Install /etc/config as 600Rosen Penev2018-09-191-3/+3
| | | | | | | | /etc/config/dropbear is used by the init script which only runs as root. Small whitespace change. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* lldpd: Install /etc/config file as 600Rosen Penev2018-09-191-6/+4
| | | | | | | | | | /etc/config/lldpd is only used by the init script, which only runs as root Adjusted homepage and download URLs to use HTTPS. -std=c99 is useful for GCC versions less than 6. Current OpenWrt uses 7. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* netifd: update to latest git HEADHans Dedecker2018-09-191-3/+3
| | | | | | 23941d7 system-linux: enable by default ignore encaplimit for ip6 tunnels Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* map: drop default encaplimit valueHans Dedecker2018-09-192-2/+2
| | | | | | | | | | | | | Setting encaplimit to a numerical value results into the value being included as tunnel encapsulation limit in the destination option header for tunneled packets. Several users have reported interop issues as not all ISPs support the destination option header containing the tunnel encapsulation limit resulting into broken map connectivity. Therefore drop the default encaplimit value for map tunnels so no destination option header is included by default. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ds-lite: drop default encaplimit valueHans Dedecker2018-09-192-2/+2
| | | | | | | | | | | | | Setting encaplimit to a numerical value results into the value being included as tunnel encapsulation limit in the destination option header for tunneled packets. Several users have reported interop issues as not all ISPs support the destination option header containing the tunnel encapsulation limit resulting into broken ds-lite connectivity. Therefore drop the default encaplimit value for ds-lite tunnels so no destination option header is included by default. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* wireguard: bump to 0.0.20180918Jason A. Donenfeld2018-09-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * blake2s-x86_64: fix whitespace errors * crypto: do not use compound literals in selftests * crypto: make sure UML is properly disabled * kconfig: make NEON depend on CPU_V7 * poly1305: rename finish to final * chacha20: add constant for words in block * curve25519-x86_64: remove useless define * poly1305: precompute 5*r in init instead of blocks * chacha20-arm: swap scalar and neon functions * simd: add __must_check annotation * poly1305: do not require simd context for arch * chacha20-x86_64: cascade down implementations * crypto: pass simd by reference * chacha20-x86_64: don't activate simd for small blocks * poly1305-x86_64: don't activate simd for small blocks * crypto: do not use -include trick * crypto: turn Zinc into individual modules * chacha20poly1305: relax simd between sg chunks * chacha20-x86_64: more limited cascade * crypto: allow for disabling simd in zinc modules * poly1305-x86_64: show full struct for state * chacha20-x86_64: use correct cut off for avx512-vl * curve25519-arm: only compile if symbols will be used * chacha20poly1305: add __init to selftest helper functions * chacha20: add independent self test Tons of improvements all around the board to our cryptography library, including some performance boosts with how we handle SIMD for small packets. * send/receive: reduce number of sg entries This quells a powerpc stack usage warning. * global: remove non-essential inline annotations We now allow the compiler to determine whether or not to inline certain functions, while still manually choosing so for a few performance-critical sections. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* dnsmasq: Handle memory allocation failure in make_non_terminals()Kevin Darbyshire-Bryant2018-09-192-1/+46
| | | | | | | | Backport upstream commit: ea6cc33 Handle memory allocation failure in make_non_terminals() Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 15:55:25 +0000