aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ramips: mt7620: fix missplaced line in 01_ledsPawel Dembicki2020-04-101-0/+1
| | | | | | | | | | | This patch adds missed line in 01_leds and fix error: "/bin/board_detect: /etc/board.d/01_leds: line 93: syntax error: unexpected ")" (expecting ";;")" Fixes: c948a47 ("ramips: add support for D-Link DWR-960") Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* tools/mm-macros: Update to 1.0.0Daniel Engberg2020-04-091-3/+5
| | | | | | Update mm-macros to 1.0.0 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/xz: Update to 5.2.5Daniel Engberg2020-04-091-2/+3
| | | | | | | Update xz to 5.2.5 Disable NLS support to be consistent with other tools such as bison, e2fsprogs and sed. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/mtools: Update to 4.0.24Daniel Engberg2020-04-091-2/+2
| | | | | | Update mtools to 4.0.24 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/findutils: Update to 4.7.0Daniel Engberg2020-04-093-120/+9
| | | | | | | | | | | | Update findutils to 4.7.0 Remove patches Enable pthreads Disable NLS support to be consistent with other tools such as bison, e2fsprogs and sed. Disable selinux support to be consistent with other tools such as sed and tar Disable rpath as we don't need hardcoded paths Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* tools/e2fsprogs: Update to 1.45.6Daniel Engberg2020-04-091-2/+2
| | | | | | Update e2fsprogs to 1.45.6 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* e2fsprogs: Update to 1.45.6Daniel Engberg2020-04-091-2/+2
| | | | | | Update e2fsprogs to 1.45.6 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* exfat-utils: add exFAT File System utilities packageDaniel Golle2020-04-091-0/+69
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: bump to latest HEADDaniel Golle2020-04-092-4/+7
| | | | | | | | | | | | 2188d81 jail: add support for launching extroot containers 6f3dbd2 jail: add support for userns and cgroupsns 28a06e5 jail: add support for (ram-)overlayfs Add handling for extroot, overlaydir and tmpoverlaysize as well as jail flags for userns and cgroupsns to OpenWrt's shell script to allow their use in init scripts. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: add genisoimage and xorrisofs as alternatives to mkisofs李国2020-04-091-2/+5
| | | | | | | | Some system not have mkisofs, but have genisoimage or xorrisofs. They have compatable options for mkisofs, so let them as alternatives to mkisofs. Signed-off-by: 李国 <uxgood.org@gmail.com>
* x86: fix grub-bios-setup fail during sysupgrade李国2020-04-092-1/+4
| | | | | | | | | | grub-bios-setup requires two images (boot.img and core.img), but they are missing. This make an error during sysupgrade: Upgrading bootloader on /dev/sda... grub-bios-setup: error: cannot open `/tmp/boot/boot/grub/boot.img': No such file or directory. Signed-off-by: 李国 <uxgood.org@gmail.com>
* ipq40xx: re-add LEDS_LP5523 for the ASUS Lyra MAP-AC2200Stefan Lippers-Hollmann2020-04-092-0/+2
| | | | | | | | | | | | | | This symbol had been enabled in the initial device support submission for kernel 4.14, but apparently got lost during the v4.19 port. The ASUS Lyra MAP-AC2200 has a single (very bright) rgb LED, which is controlled by the TI/National LP5523/55231 LED driver chip. It is left enabled in a pulsating infinite rainbow loop by the bootloader, expecting it to be reconfigured (disabled by default) after the boot process has finished and is also required to indicate failsafe/ firstboot conditions. Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* build: add option to warn on recursive dependencyEneas U de Queiroz2020-04-093-1/+10
| | | | | | | | | | | This addes the option to treat recursive dependencies as warnings instead of errors, by running make with WARN_RECURSIVE_DEP=1. Note that the script/config targets will not get rebuilt when you add or remove WARN_RECURSIVE_DEP while running make. One must run 'make config-clean' before building config with a different setting. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* build: scripts/config - update to kconfig-v5.6Eneas U de Queiroz2020-04-0938-4951/+7752
| | | | | | | | | | | | | | Major changes include: - Much more readable reverse dependencies separated in groups - Improved recursive dependency report - More readable .config files: add comments to signal end of menus - More warnings for incorrect Config.in entries, such as a 'choice' default not contained in the 'choice' - Hability to properly display pseudographics with non-latin locales - Recursive dependencies are now treated as errors - this should make it harder for them to creep in. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* build: simplify building *config targetsEneas U de Queiroz2020-04-092-25/+13
| | | | | | | | | | | | Instead of passing pkg-config location through a variable when building qconf (make xconfig), prepend its parent directory to the PATH, as it is being done for other conf targets. Use a Makefile pattern rule to group all 'scripts/config/%onf' (currently conf, mconf, qconf) targets in a single rule. Add -O2 to CFLAGS when building them as well. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* build: define RTC_SUPPORT as a boolEneas U de Queiroz2020-04-091-2/+1
| | | | | | | | | | | | | | | Currently, RTC_SUPPORT is defined as a tristate, with 'depends on m', which is supposed to only let it be set to 'm' or 'n'. However, scripts/target-metadata.pl will 'select' it, or setting it to 'y', which defeats it's 'depends on m' restriction. The users of the symbol are not expecting it to be necessarily 'm' either, so we can safely use it as bool. Newer versions of Linux 'conf' will issue a warning when it detects such unmet dependencies, and will set it to 'n' instead of 'y', as the current version does. In all cases, 'm' is never used. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* busybox: quote 'source' filenames in Config.inEneas U de Queiroz2020-04-093-24/+24
| | | | | | | Newer versions of the kconfig program requires quoting the arguments of the 'source' directive. These are the last ones not using them. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: add @IPV6 dependency to ipv6 modulesEneas U de Queiroz2020-04-092-8/+11
| | | | | | | | | | | | | | IPv6 modules should all depend on @IPV6, to avoid circular dependencies problems, especially if they select a module that depends on IPV6 as well. In theory, if a package A depends on IPV6, any package doing 'select A' (DEPENDS+= A) should also depend on IPV6; otherwise selecting A will fail. Sometimes the build system is forgiving this, but eventually, and unexpectedly, it may blow up on some other commit. Alternatively one can conditionally add IPv6 dependencies only if CONFIG_IPV6 is selected: (DEPENDS+= +IPV6:package6). Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* build: move symvers files to kernel build dirFelix Fietkau2020-04-091-4/+6
| | | | | | | | | | The symvers files of older kernel versions are incompatible with the ones from 5.4, so changing the kernel version without running make clean was causing build failures in kernel module packages. Fix this by moving the directory, ensuring that symvers files get thrown away with a kernel version change Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: fix kernel_menuconfig on macOS with newer kernel versionsFelix Fietkau2020-04-091-1/+5
| | | | | | Account for upstream build system changes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath79: add support for Comfast CF-WR752AC v1Roman Hampel2020-04-095-4/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: - Qualcomm QCA9531 + QCA9886 - dual band, antenna 2*3dBi - Output power 50mW (17dBm) - 1x 10/100 Mbps LAN RJ45 - 128 MB RAM / 16 MB FLASH (w25q128) - 3 LEDs (red/green/blue) incorporated in "color wheel reset switch" - UART 115200 8N1 Flashing instructions: The U-boot bootloader contains a recovery HTTP server to upload the firmware. Push the reset button while powering the device on and keep it pressed for ~10 seconds. The device's LEDs will blink several times and the recovery page will be at http://192.168.1.1; use it to upload the sysupgrade image. Alternatively, the original firmware is based on OpenWrt so a sysupgrade image can be installed via the stock web GUI. Settings from the original firmware will be saved and restored on the new one, so a factory reset will be needed. To do so, once the new firmware is flashed, enter into failsafe mode by pressing the reset button several times during the boot process, until it starts flashing. Once in failsafe mode, perform a factory reset as usual. LED-Info: The LEDs on the Comfast stock fw have a very proprietary behaviour, corresponding to the user selected working mode (AP, ROUTER or REPEATER). In the first two cases, only blue is used for status and LAN signaling. When using the latter, blue is always off (except for sysupgrade), either red signals bad rssi on master-link, or green good. Since the default working mode of OpenWrt resembles that of a router/AP, the default behavior is implemented accordingly. MAC addresses (art partition): location address (example) use in vendor firmware 0x0 xx:xx:xx:xx:xc:f8 -> eth0 0x6 xx:xx:xx:xx:xc:fa -> wlan5g (+2) 0x1002 xx:xx:xx:xx:xc:f9 -> not used 0x5006 xx:xx:xx:xx:xc:fb -> not used --- xx:xx:xx:xx:xd:02 -> wlan2g (+10) The same strange situation has already been observed and documented for COMFAST CF-E560AC. Signed-off-by: Roman Hampel <rhamp@arcor.de> Co-developed-by: Joao Albuquerque <joaohccalbu@gmail.com> Signed-off-by: Joao Albuquerque <joaohccalbu@gmail.com> [adjust and extend commit message, rebase, minor DTS adjustments, add correct MAC address for wmac, change RSSI LED names and behavior] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.31Petr Štetiar2020-04-0926-226/+85
| | | | | | | | | | | | | Refreshed patches, removed upstreamed patches: oxnas: 003-ARM-dts-oxnas-Fix-clear-mask-property.patch generic: 184-USB-serial-option-add-Wistron-Neweb-D19Q1.patch Run tested: apu2, qemu-x86-64, apalis Build tested: sunxi/a53, imx6, x86/64, ipq40xx Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: generic: 5.4: fix mips command line parameter patchBjørn Mork2020-04-091-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | Fixing a build error when CONFIG_KERNEL_KEXEC is enabled: make[5]: Entering directory '/home/bjorn/tmp/tmp-lede/build_dir/target-mipsel_24kc_musl/linux-ramips_mt7621/linux-5.4.28' CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh CHK include/generated/compile.h CC arch/mips/kernel/machine_kexec.o arch/mips/kernel/machine_kexec.c: In function 'kexec_nonboot_cpu_jump': arch/mips/kernel/machine_kexec.c:268:27: error: 'relocate_new_kernel_size' undeclared (first use in this function); did you mean 'kexec_relocate_new_kernel_end'? reboot_code_buffer + relocate_new_kernel_size); ^~~~~~~~~~~~~~~~~~~~~~~~ kexec_relocate_new_kernel_end arch/mips/kernel/machine_kexec.c:268:27: note: each undeclared identifier is reported only once for each function it appears in arch/mips/kernel/machine_kexec.c: In function 'kexec_reboot': arch/mips/kernel/machine_kexec.c:306:27: error: 'relocate_new_kernel_size' undeclared (first use in this function); did you mean 'kexec_relocate_new_kernel_end'? reboot_code_buffer + relocate_new_kernel_size); ^~~~~~~~~~~~~~~~~~~~~~~~ kexec_relocate_new_kernel_end make[7]: *** [scripts/Makefile.build:266: arch/mips/kernel/machine_kexec.o] Error 1 Signed-off-by: Bjørn Mork <bjorn@mork.no>
* gemini: Refine package listLinus Walleij2020-04-091-3/+4
| | | | | | | | | The NAS packages for Gemini doesn't even include the block-mount package. Augment the list to be based off the DEFAULT_PACKAGES.nas to make sure we extend on the essentials. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* linux-atm: Include linux/sockios.h for SIOCGSTAMPNorbert van Bolhuis2020-04-091-0/+21
| | | | | | | | | | | | Since linux kernel commit 0768e17073dc527ccd18ed5f96ce85f9985e9115 (2019-04-19) the asm-generic/sockios.h header no longer defines SIOCGSTAMP. Instead it provides only SIOCGSTAMP_OLD. The linux/sockios.h header now defines SIOCGSTAMP using either SIOCGSTAMP_OLD or SIOCGSTAMP_NEW as appropriate. This linux only header file is not included so we get a build failure. Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
* ipq806x: switch to 5.4 kernelAnsuel Smith2020-04-091-2/+1
| | | | | | | | ipq806x has been tested for a lot and lots of people reported good results. Switch the main kernel to 5.4 following the other targets. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq8065, NBG6817] Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* base-files: add enabled commands to service rc.commonFlorian Eckert2020-04-082-1/+2
| | | | | | Add missing enbaled command help output. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* ramips: use full 8MB flash on ZyXEL KeeneticAlexey Dobrovolsky2020-04-082-2/+2
| | | | | | | | | | | | | | | | ZyXEL Keenetic has 8MB flash, but OpenWrt uses only 4MB. This commit fixes the problem. WikiDevi page [1] says that ZyXEL Keenetic has FLA1: 8 MiB, there is an article with specs [2] (in Russian). [1] https://wikidevi.wi-cat.ru/ZyXEL_Keenetic [2] https://3dnews.ru/608774/page-2.html Fixes: FS#2487 Fixes: a7cbf59e0e04 ("ramips: add new device ZyXEL Keenetic as kn") Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
* ath79: fix MAC addresses for ethernet on ZyXEL NBG6716Adrian Schmutzler2020-04-082-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | MAC addresses of the ethernet devices (eth0 & eth1) are randomly set at boot time by the ag71xx driver, because it is currently not possible to retrieve MAC addresses in ASCII format within the DTS file. This commit works around this behaviour by setting the MAC addresses during the preinit phase. The same has been implemented recently for the Siemens WS-AP3610 in d2b8ccb1c04d ("ath79: add support for Siemens WS-AP3610"). MAC assignment in vendor firmware is as follows: use vendor address OpenWrt 2g wifi0 ethaddr -> wlan1 5g wifi1 ethaddr +1 -> wlan0 lan eth1 ethaddr +2 -> eth0 wan eth0 ethaddr +3 -> eth1 ethaddr is retrieved by $(mtd_get_mac_ascii u-boot-env ethaddr) Note that both Wifi and ethernet indexing is swapped in OpenWrt compared to vendor firmware. Suggested-by: Guillaume Lefebvre <guillaume@zelig.ch> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Kevin Gagnon <kevin_gagnon@videotron.ca>
* ramips: add support for D-Link DWR-960Pawel Dembicki2020-04-086-0/+216
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DWR-960 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 128 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610 mpcie card) - 4x 10/100 Mbps Ethernet (1 WAN and 3 LAN) - 1x 10/100/1000 Mbps Ethernet (1 LAN) (AR8035) - 2x internal, non-detachable antennas (Wifi 2.4G) - 3x external, detachable antennas (2x LTE, 1x Wifi 5G) - 1x LTE modem - UART (J4) header on PCB (57600 8n1) - 9x LED, 2x button - JBOOT bootloader Known issues: - Flash is extremely slow. Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* packages: mt76: add 14c3:7610 pci id to listPawel Dembicki2020-04-082-1/+31
| | | | | | | | | | This commit add patch with 14c3:7610 pci id addition. It was sent upstream. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [bumped PKG_RELEASE] Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: mt7620: add rgmii delays supportPawel Dembicki2020-04-082-0/+38
| | | | | | | | | | At this moment mt7620 ethernet driver doesn't support rgmii delays configuration. SoC MT7620 have bits 2 and 3 in GPC1 an GPC2 to configure delays for rx and tx rgmii interface. This patch adds rx/tx rgmii delay configuration from dts. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* generic: backport Wistron Neweb D19Q1 patchesPawel Dembicki2020-04-084-0/+219
| | | | | | | Backport patches which adds suport for the Wistron Neweb D19Q1 3G/4G modem, used in D-Link DWR-960. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ramips: mt7621: harmonize naming scheme for MikrotikAdrian Schmutzler2020-04-089-32/+42
| | | | | | | | | | | | | | | | | So far, image/device/board names for Mikrotik devices in mt7621 have been used quite inconsistently. This patch harmonizes the naming scheme by applying the same style as used lately in ath79, i.e. using "RouterBOARD" as separate word in the model name (instead of RB prefix for the number) and deriving the board/device name from that (= make lower case and replace spaces by hyphens). This style has already been used for most the model/DEVICE_MODEL variables in mt7621, so this is essentially just adjusting the remaining variables to that. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: mt7621: reenable rbm11gTobias Schramm2020-04-082-2/+0
| | | | | | | I have a rbm11g and can confirm that the LAN port is indeed switch port 0. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
* ramips: mt7621: add label mac address to rbm11gTobias Schramm2020-04-081-0/+1
| | | | | | | The rbm11g has a label with printed on mac address similar to the rbm33g. Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
* iproute2: add kmod-netlink-diag for ssRosen Penev2020-04-071-2/+2
| | | | | | | | | | | | | | | | | Allows proper usage of the ss tool. Otherwise, several errors and bad data gets thrown: Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Cannot open netlink socket: Protocol not supported Originally reported here: https://github.com/openwrt/packages/issues/8232 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kmod: add netlink-diag packageRosen Penev2020-04-071-0/+15
| | | | | | This is used by the ss utility from iproute2. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: add support for Buffalo WSR-2533DHPLINAGAKI Hiroshi2020-04-072-0/+245
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Buffalo WSR-2533DHPL is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615N) - Ethernet : 10/100/1000 Mbps - Switch : MediaTek MT7530 (SoC) - LED/keys : 8x/6x (3x buttons, 2x slide-switches) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from triangle-mark - 57600n8 - Power : 12VDC 1.5A Flash instruction using initramfs image: 1. prepare the TFTP server with the initramfs image renamed to "linux.trx-recovery" and IP address "192.168.11.2" 2. press the "AOSS" button while powering on the WSR-2533DHPL 3. after 10 seconds, release the "AOSS" button, WSR-2533DHPL downloads the initramfs image and boot with it automatically 4. on the initramfs image, download the sysupgrade image to the device and perform sysupgrade with it 5. wait ~120 seconds to complete flashing Switch position overview: - slide-switch1 (2x positions) - "AUTO" - "MANUAL" (not connected to gpio) - slide-switch2 (3x positions) - "ROUTER" - "AP" (not connected to gpio) - "WB" Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [add note on switches, fix group->groups for state_default] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* bcm53xx: add support for Luxul FullMAC WiFi devicesDan Haab2020-04-072-1/+36
| | | | | | | | | | This prepares support for models XAP-1610 and XWR-3150. Flashing requires using Luxul firmware version: 1) 8.1.0 or newer for XAP-1610 2) 6.4.0 or newer for XWR-3150 and uploading firmware using "Firmware Update" web UI page. Signed-off-by: Dan Haab <dan.haab@legrand.com>
* ath79: add support for Comfast CF-EW72Chris Morgan2020-04-074-1/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: Qualcomm/Atheros QCA9531 + QCA9886 2x 10/100 Mbps Ethernet, with 48v PoE 2T2R 2.4 GHz, 802.11b/g/n 2T2R 5 GHz, 802.11a/n/ac 128MB RAM 16MB SPI Flash 4x LED (Always On Power, LAN, WAN, WLAN) Flashing Instructions: Original firmware is based on OpenWRT, so flashing the sysupgrade image on the factory firmware is sufficient. Tested: Reset button, WAN LED, LAN LED, Power LED (always on, not much to test), WLAN LED (one LED only for 2 interfaces, by default it gets assigned to the first interface), MAC addresses (match factory firmware). My LAN factory MAC address ends in F2. use stock_mac art_loc lan :f2 0x0 wan :f3 0x1002 5g :f4 0x6 2g :f5 0x5006 Since MAC address flash locations do not really match their use in vendor firmware (e.g. address from 5 GHz calibration data is assigned to 2.4 GHz WiFi), just calculate the MAC addresses with an offset based on 0x0 address. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> [add MAC address comment] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ppp: update to version 2.4.8.git-2020-03-21Hans Dedecker2020-04-069-137/+10
| | | | | | | | | | | | | | | | | | | Use upstream latest git HEAD as it allows to remove the patches 700-radius-Prevent-buffer-overflow-in-rc_mksid, 701-pppd-Fix-bounds-check-in-EAP-code and 702-pppd-Ignore-received-EAP-messages-when-not-doing-EAP and take in other fixes. 41a7323 pppd: Fixed spelling 'unkown' => 'unknown' (#141) 6b014be pppd: Print version information to stdout instead of stderr (#133) cba2736 pppd: Add RFC1990 (Multilink) to the See Also section of the man page f2f9554 pppd: Add mppe.h to the list of headers to install if MPPE is defined ae54fcf pppd: Obfuscate password argument string 8d45443 pppd: Ignore received EAP messages when not doing EAP 8d7970b pppd: Fix bounds check in EAP code 858976b radius: Prevent buffer overflow in rc_mksid() Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tools/cmake: update to 3.17.0Rosen Penev2020-04-066-74/+37
| | | | | | | | | | | Remove libressl patches; they are no longer needed as LibreSSl adde support Replace qt tests patch with one that disables all of them. Refresh remaining one. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ramips: harmonize Netgear R6120 DT LED node namesAlex Lewontin2020-04-061-3/+3
| | | | | | | | | This changes the node names for the LEDs in the Netgear R6120 device-tree file to provide consistency with other devices. Signed-off-by: Alex Lewontin <alex.c.lewontin@gmail.com> [improve commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: netdev: add missing config for mlx5 driverTan Zien2020-04-061-3/+12
| | | | | | | | | | | The mlk5 kmod lacks all necessary build symbols for kernel 4.14 (again). Add missing symbols to avoid build failure on these targets. Signed-off-by: Tan Zien <nabsdh9@gmail.com> [rewrite commit message - reorder symbols] Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add support for TP-Link TL-MR3420 v3Lim Guo Wei2020-04-064-10/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the TP-Link TL-MR3420 v3, a later revision of the v2 with an external gpiochip similar to TP-Link Archer C7 v4. Specifications: SOC: Qualcomm Atheros QCA9531 CPU: 650MHz Flash: 4 MiB RAM: 32 MiB WLAN: Qualcomm Atheros QCA9531 bgn 2T2R 2.4 GHz Ethernet: 5 ports (100M) Flashing instructions: - Flash factory image from OEM WebUI: openwrt-ath79-tiny-tplink_tl-mr3420-v3-squashfs-factory.bin - Sysupgrade from ath79 image: openwrt-ath79-tiny-tplink_tl-mr3420-v3-squashfs-sysupgrade.bin Signed-off-by: Lim Guo Wei <limguowei@gmail.com> [remove SUPPORTED devices, some typo adjustments, fix WAN MAC address, fix sorting in 01_leds] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* dnsmasq: bump to 2.81rc5Kevin Darbyshire-Bryant2020-04-063-67/+181
| | | | | | | | | | | | | | | | | | | | Bump to 2.81rc5 and re-work ipset-remove-old-kernel-support. More runtime kernel version checking is done in 2.81rc5 in various parts of the code, so expand the ipset patch' scope to inlude those new areas and rename to something a bit more generic.:wq Upstream changes from rc4 532246f Tweak to DNSSEC logging. 8caf3d7 Fix rare problem allocating frec for DNSSEC. d162bee Allow overriding of ubus service name. b43585c Fix nameserver list in auth mode. 3f60ecd Fixed resource leak on ubus_init failure. 0506a5e Handle old kernels that don't do NETLINK_NO_ENOBUFS. e7ee1aa Extend stop-dns-rebind to reject IPv6 LL and ULA addresses. We also reject the loopback address if rebind-localhost-ok is NOT set. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ipq806x: remove support for kernel 4.14Adrian Schmutzler2020-04-0670-26575/+0
| | | | | | | | | | | This target has been on kernel 4.19 for several months [1] and already uses kernel 5.4 as testing kernel. Therefore, it should not be necessary to keep support for kernel 4.14 as well. [1] 2a82e0e1ca0f ("ipq806x: switch to 4.19 kernel version") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq8065/nbg6817]
* ramips: add DTS triggers to USB LEDs for F9K1109v1Kip Porterfield2020-04-063-2/+19
| | | | | | | Alter DTS for Belkin F9K1109v1 to trigger USB leds from the echi/ochi ports. Signed-off-by: Kip Porterfield <kip.porterfield@gmail.com>
* mediatek: set v5.4 as defaultJohn Crispin2020-04-061-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:26:20 +0000