aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* kernel: bump 5.4 to 5.4.119John Audia2021-05-2317-148/+18
| | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.4/050-gro-fix-napi_gro_frags-Fast-GRO-breakage-due-to-IP-a.patch bcm63xx/patches-5.4/434-nand-brcmnand-fix-OOB-R-W-with-Hamming-ECC.patch* Removed/code was included upstream and therefore redundant: ramips/patches-5.4/999-fix-pci-init-mt7620.patch All other patches automatically rebased. * update_kernel.sh did not flag this yet it was included in 5.4.119[1], as a result of the rebase, I removed my testing lines since I did not go back to test built or to run test 5.4.119 with the removed patch present. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.4.119&id=e5b3e69eb36ac1178a7a2392616fd29afd288c4e Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.118John Audia2021-05-2318-56/+27
| | | | | | | | | | | | | | | | | | Manually rebased: ath79/patches-5.4/0033-spi-ath79-drop-pdata-support.patch Removed uneeded patch: ath79/patches-5.4/0050-spi-ath79-remove-spi-master-setup-and-cleanup-assign.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.39Kevin Darbyshire-Bryant2021-05-222-17/+17
| | | | | | | | Automatically refreshed: generic/pending-5.10/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: bump 5.10 to 5.10.38Rui Salvaterra2021-05-2211-155/+18
| | | | | | | | | | | | | | | | | | Automatically refreshed: apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch generic/backport-5.10/610-v5.13-31-net-ethernet-mtk_eth_soc-fix-parsing-packets-in-GDM.patch generic/backport-5.10/610-v5.13-32-net-ethernet-mtk_eth_soc-add-support-for-initializin.patch generic/backport-5.10/610-v5.13-33-net-ethernet-mtk_eth_soc-add-flow-offloading-support.patch generic/hack-5.10/204-module_strip.patch generic/hack-5.10/911-kobject_add_broadcast_uevent.patch ipq806x/patches-5.10/104-1-drivers-thermal-tsens-Add-VER_0-tsens-version.patch ipq806x/patches-5.10/104-8-drivers-thermal-tsens-Add-support-for-ipq8064-tsens.patch Deleted (reverse-appliable): generic/backport-5.10/610-v5.13-37-net-ethernet-mtk_eth_soc-fix-RX-VLAN-offload.patch ipq806x/patches-5.10/106-5.13-net-stmmac-Set-FIFO-sizes-for-ipq806x.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* hostapd: wolfssl: add RNG to EC keyDavid Bauer2021-05-212-1/+49
| | | | | | | | | | Since upstream commit 6467de5a8840 ("Randomize z ordinates in scalar mult when timing resistant") WolfSSL requires a RNG for the EC key when built hardened which is the default. Set the RNG for the EC key to fix connections for OWE clients. Signed-off-by: David Bauer <mail@david-bauer.net>
* wolfssl: always export wc_ecc_set_rngDavid Bauer2021-05-212-1/+51
| | | | | | | | | | | | | | | Since commit 6467de5a8840 ("Randomize z ordinates in scalar mult when timing resistant") wolfssl requires a RNG for an EC key when the hardened built option is selected. wc_ecc_set_rng is only available when built hardened, so there is no safe way to install the RNG to the key regardless whether or not wolfssl is compiled hardened. Always export wc_ecc_set_rng so tools such as hostapd can install RNG regardless of the built settings for wolfssl. Signed-off-by: David Bauer <mail@david-bauer.net>
* busybox: nslookup applet link with resolv if use glibcChen Minqiang2021-05-211-0/+4
| | | | | | | | | This fixed b36b8b6929c6d6b17edddfb4597cf6a26a991ed0 ("busybox: remove nslookup_lede/openwrt.patch") It is likely dropped by mistake, This add back the changes Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* grub2: disable liblzma dependencyDirk Neukirchen2021-05-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Florian Ekert reported: "I have build a fresh master branch recently, Since your last change [1] on grub2, I have now a new dependency on liblzma for the install package grub2-editenv. root@st-dev-07 /usr/lib # ldd /root/grub-editenv /lib/ld-musl-x86_64.so.1 (0x7f684b088000) liblzma.so.5 => /usr/lib/liblzma.so.5 (0x7f684b06d000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x7f684b059000) libc.so => /lib/ld-musl-x86_64.so.1 (0x7f684b088000) This was not the case before your update. root@st-dev-07 /usr/sbin # ldd /usr/sbin/grub-editenv /lib/ld-musl-x86_64.so.1 (0x7fd970176000) libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x7fd970162000) libc.so => /lib/ld-musl-x86_64.so.1 (0x7fd970176000) My build complains that it cannot satisfy the runtime package dependency for grub2-editenv. install -d -m0755 /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/ipkg-x86_64/grub2-editenv/usr/sbin install -m0755 /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/grub-editenv /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/ipkg-x86_64/grub2-editenv/usr/sbin/ find /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/build_dir/target-x86_64_musl/linux-x86_64/grub-pc/grub-2.06~rc1/ipkg-x86_64/grub2-editenv -name 'CVS' -o -name '.svn' -o -name '.#*' -o -name '*~'| xargs -r rm -rf Package grub2-editenv is missing dependencies for the following libraries: liblzma.so.5 make[2]: *** [Makefile:166: /home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/bin/APOS/feckert/master/master-Maggie-455-ga5edc0e8e/x86_64/targets/x86/64/packages/grub2-editenv_2.06~rc1-1_x86_64.ipk] Error 1 make[2]: Leaving directory '/home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/package/boot/grub2' time: package/boot/grub2/pc/compile#78.64#9.79#83.88 ERROR: package/boot/grub2 failed to build (build variant: pc). make[1]: *** [package/Makefile:116: package/boot/grub2/compile] Error 1 make[1]: Leaving directory '/home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt' make: *** [/home/feckert/workspace/openwrt/LDM-master-x86_64/build/openwrt/include/toplevel.mk:230: package/boot/grub2/compile] Error 2 If I add the following changes to the package all works as expected. <snip> - DEPENDS:=@TARGET_x86 + DEPENDS:=@TARGET_x86 +liblzma VARIANT:=pc endef This is a hotfix but I dont´t think this is the final solution, because lzma is provided by the package xz. And This is maintained in the package feed [not the core]" Dirk stated & offered his patch to disable liblzma and thus resolve the 'out of core dependency' problem: "LZMA is used in mkimage.c disabling it prints Without liblzma (no support for XZ-compressed mips images) (explicitly disabled) (see configure.ac) liblzma is autodetected so this issue was present but hidden somehow [unsure: grep/image generation does not use grub with that option] OpenWrt does not use that feature currently [!] some scripts and examples use --compression=xz or -C xz and those will break grub has an internal xzlib for different "lzma" functionality (ext. LIBLZMA from XZ (GRUB_COMPRESSION_XZ) vs. GRUB_COMPRESSION_LZMA)" Hopefully fixes e74d81ece2e2932a4f370d8e6d180061a6a2c229 and doesn't break anything else. Signed-off-by: Dirk Neukirchen <plntyk.lede@plntyk.name> [include Florian's description of how problem 1st encountered] [bump package release] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* uboot-envtools: support uci-default config also per subtargetsPiotr Dymacz2021-05-201-3/+7
| | | | | | | | | | The current version of 'uboot-envtools' package generates dedicated uci-default file only per target. This change makes it possible to use subtarget-specific files, with name pattern: 'target_subtarget' (example: 'ath79_nand'). The subtarget-specific files will take precedence over target-specific one. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* imx6: image: cleanup variables order within device's definesPiotr Dymacz2021-05-201-13/+15
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* imx6: image: keep devices in alphabetical orderPiotr Dymacz2021-05-201-7/+7
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: update BUILD_DEVICES valuesPiotr Dymacz2021-05-201-3/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-imx6: drop 'HIDDEN' flag from 'mx6cuboxi' definePiotr Dymacz2021-05-201-1/+0
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* imx6: image: use vendor_model schemePiotr Dymacz2021-05-205-15/+15
| | | | | | | This switches device names to the common 'vendor_model' approach as in most of other targets in OpenWrt. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* imx6: image: cleanup image recipesPiotr Dymacz2021-05-201-7/+5
| | | | | | | | | - drop unused 'UBOOT' variable from 'Device/apalis' recipe - fix 'KERNEL_SUFFIX' for 'Device/cubox-i' (should be '-zImage') - drop redundant 'DEVICE_{VENDOR,MODEL}' from 'Device/ventana-large' - other, minor fixes Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* imx6: rename Freescale to NXP in BOARDNAME and profilesPiotr Dymacz2021-05-202-2/+2
| | | | | | Freescale no longer exists, it was acquired by NXP in 2015. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* firmware-utils: fix coverity zytrx.c resource leakKevin Darbyshire-Bryant2021-05-201-1/+3
| | | | | | | | | | | | | | | fix coverity resource leak warning: *len = stat.st_size; mapped = mmap(NULL, stat.st_size, PROT_READ, MAP_SHARED, fd, 0); if (close(fd) < 0) CID 1484880: Resource leaks (RESOURCE_LEAK) Variable "mapped" going out of scope leaks the storage it points to. return NULL; return mapped; } Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "base-files: migrate old UCI network bridge ports syntax"Rafał Miłecki2021-05-201-23/+0
| | | | | | | | | This reverts commit f716c30241d5fd9d821560f58d0af0c3ffe78600. Migrating everyone to the new syntax could break downgrades. We may reintroduce it way later if needed. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* netifd: update to the latest masterRafał Miłecki2021-05-201-3/+3
| | | | | | | config: fix ifname->ports compat rename Fixes: 829b5c2ba32f ("netifd: update to the latest version") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: generate bridge device sections with br- name prefixRafał Miłecki2021-05-201-2/+2
| | | | | | | | | | | Missing br- prefix could result in name conflict between DSA port interface and bridge interface. Some devices with just one LAN port use "lan" interface name for DSA port. Trying to create bridge with the same "lan" name was failing. Reported-by: David Bauer <mail@david-bauer.net> Fixes: 43fc720657c6 ("base-files: generate "device" UCI type section for bridge") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* busybox: preserve crontabsPhilip Prindeville2021-05-192-4/+18
| | | | | | | | | | | | /etc/syslog.conf is used by sysklogd, and /etc/crontabs is used by crond, both features of busybox. Given this, ownership for these files should be bound to busybox, especially if one day there's a way to do an in-place opkg update of busybox. There's also the busybox provided syslogd which uses this file if CONFIG_BUSYBOX_FEATURE_SYSLOGD_CFG is set. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* busybox: remove nslookup_lede/openwrt.patchNick Hainke2021-05-194-995/+3
| | | | | | | | | | | | | | | | | | The nslookup_lede/openwrt applet was introduced in de5b8e5. It was introduced because: Add a new LEDE nslookup applet which is compatible with musl libc and providing more features like ability to specify query type. In contrast to busybox' builtin nslookup applet, this variant does not rely on libc resolver internals but uses explicit send logic and the libresolv primitives to parse received DNS responses. In busybox this applet is added in 0dd3be8. In particular, this commit introduces the variable NSLOOKUP_BIG. We set the default to true and so nothing changes. Signed-off-by: Nick Hainke <vincent@systemli.org>
* busybox: show reproducible timestampPaul Spooren2021-05-192-4/+80
| | | | | | | | | | | | | | | | | | | | On login busybox shows a timestamp per default contianing the build date. Since the build date isn't reproducible per default this behaviour was disabled by default via 34df4d40 "busybox: disable timestamp in version". This commit modifies busybox so that the printed timestamp reproducible using SOURCE_DATE_EPOCH and therefore shouldn't be disabled anymore. Before: BusyBox v1.33.1 () built-in shell (ash) After: BusyBox v1.33.1 (2021-05-13 09:34:34 UTC) built-in shell (ash) Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: migrate old UCI network bridge ports syntaxRafał Miłecki2021-05-181-0/+23
| | | | | | | | netifd has been recently patched to use more accurate "ports" option instead of "ifname". This is a simple translation between two UCI options. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: generate "device" UCI type section for bridgeRafał Miłecki2021-05-181-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This switches from the old way of defining bridges in an "interface" UCI section type (that should be used for layer 3 only). From now a defualt board switch will have its own "device" UCI section type. It's a new & preferred way of defining L2 devices. Before: config interface 'lan' option type 'bridge' option ifname 'lan1 lan2 lan3 lan4' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' After: config device option name 'lan' option type 'bridge' list ports 'lan1' list ports 'lan2' list ports 'lan3' list ports 'lan4' config interface 'lan' option ifname 'lan' option proto 'static' option ipaddr '192.168.1.1' option netmask '255.255.255.0' Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* rpcd: fix PKG_MIRROR_HASHDavid Bauer2021-05-181-1/+1
| | | | | | Fixes commit 97e820c6d61d ("rpcd: update to latest HEAD") Signed-off-by: David Bauer <mail@david-bauer.net>
* busybox: use $(AUTORELEASE) and SPDXPaul Spooren2021-05-181-6/+3
| | | | | | | | use AUTORELEASE since BusyBox is often updaten and PKG_RELEASE is not consistently bumped. Also use SPDX license headers to be machine readable and bump the copyright year to 2021. Signed-off-by: Paul Spooren <mail@aparcar.org>
* netifd: update to the latest versionFelix Fietkau2021-05-181-4/+4
| | | | | | | | | | 02dd2f2df7cb fix unannotated fall-through warnings 3052f2f67686 extdev: remove unused function 2a97fd006c3b device: add support for configuring devices with external auth handler 87e469be0c08 wireless: fix memory corruption bug when using vlans/station entries in the config 7277764bf817 bridge: rename "ifname" attribute to "ports" Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add patch for disabling automatic bridging of vlan interfacesFelix Fietkau2021-05-182-3/+40
| | | | | | | netifd is responsible for handling that, except if the vlan bridge was provided by the config Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add ubus notifications for adding/removing vlan interfacesFelix Fietkau2021-05-184-1/+78
| | | | | | | This can be used to handle network configuration of dynamically created vlan interfaces in a more flexible way Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libubox: update to the latest versionFelix Fietkau2021-05-181-3/+3
| | | | | | | | | | | | 870acee325fe tests: cram: test_base64: fix failing tests 4d8995e91d56 tests: cram: test_base64: really fix failing tests 551d75b5662c libubox: tests: add more blobmsg/json test cases a0dbcf8b8f96 tests: add blob-buffer overflow test b36a3a90098d blob: fix exceeding maximum buffer length b8abed749423 utils.h: add fallthrough macro b14c4688612c json_script: fix unannotated fall-through warning Signed-off-by: Felix Fietkau <nbd@nbd.name>
* toolchain/gdb: fix broken configure test for ELF supportFelix Fietkau2021-05-181-0/+20
| | | | | | A missing #include was causing gdb on macOS to be compiled without ELF support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: use "ports" array in board.json network for bridgesRafał Miłecki2021-05-182-7/+20
| | | | | | | | | | | | | | | | | | | | | | | | | Bridge aggregates multiple ports so use a more accurate name ("ports") and format (array) for storing them in board.json. Example: "network": { "lan": { "ports": [ "lan1", "lan2", "lan3", "lan4" ], "protocol": "static" }, "wan": { "ifname": "wan", "protocol": "dhcp" } } Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* openwrt-keyring: Only copy sign key for snapshotsHauke Mehrtens2021-05-171-2/+3
| | | | | | | | | | Instead of adding all public signature keys from the openwrt-keyring repository only add the key which is used to sign the master feeds. If one of the other keys would be compromised this would not affect users of master snapshot builds. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* bmips: remove duplicated brcmnand patchÁlvaro Fernández Rojas2021-05-171-38/+0
| | | | | | | brcmnand patch was applied upstream on 5.10.37 update. Fixes: d337731f85c8 ("kernel: bump 5.10 to 5.10.37") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* octeon: use shared function for platform_copy_config()Adrian Schmutzler2021-05-171-11/+13
| | | | | | | | | This reduces redundant instructions. The solution is inspired by a different implemention of Roman Kuzmitskii. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for ZiKing CPE46BGiulio Lorenzo2021-05-173-0/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ZiKing CPE46B is a POE outdoor 2.4ghz device with an integrated directional antenna. It is low cost and mostly available via Aliexpress, references can be found at: - https://forum.openwrt.org/t/anddear-ziking-cpe46b-ar9331-ap121/60383 - https://git.lsd.cat/g/openwrt-cpe46b Specifications: - Atheros AR9330 - 32MB of RAM - 8MB of flash (SPI NOR) - 1 * 2.4ghz integrated antenna - 2 * 10/100/1000 ethernet ports (1 POE) - 3 * Green LEDs controlled by the SoC - 3 * Green LEDs controlled via GPIO - 1 * Reset Button controlled via GPIO - 1 * 4 pin serial header on the PCB - Outdoor packaging Flashing instruction: You can use sysupgrade image directly in vendor firmware which is based on OpenWrt/LEDE. In case of issues with the vendor GUI, the vendor Telnet console is vulnerable to command injection and can be used to gain a shell directly on the OEM OpenWrt distribution. Signed-off-by: Giulio Lorenzo <salveenee@mortemale.org> [fix whitespaces, drop redundant uart status and serial0, drop num-chipselects, drop 0x1002 MAC address for wmac] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: fix leading whitespaces in generic 01_ledsAdrian Schmutzler2021-05-171-2/+2
| | | | | | Use tabs consistently. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for COMFAST CF-E375ACJoao Henrique Albuquerque2021-05-175-0/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | COMFAST CF-E375AC is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563 + QCA9886 + QCA8337. Short specification: 2x 10/100/1000 Mbps Ethernet, with PoE support 128MB of RAM (DDR2) 16 MB of FLASH 3T3R 2.4 GHz, 802.11b/g/n 2T2R 5 GHz, 802.11ac/n/a, wave 2 built-in 5x 3 dBi antennas output power (max): 500 mW (27 dBm) 1x RGB LED, 1x button built-in watchdog chipset Flash instruction: 1) Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. 2) TFTP 2.1) Set a tftp server on your machine with a fixed IP address of 192.168.1.10. A place the sysupgrade as firmware_auto.bin. 2.2) boot the device with an ethernet connection on fixed ip route 2.3) wait a few seconds and try to login via ssh 3) TFTP trough Bootloader 3.1) open the device case and get a uart connection working 3.2) stop the autoboot process and test connection with serverip 3.3) name the sysupgrade image firmware.bin and run firmware_upg MAC addresses: Though the OEM firmware has four adresses in the usual locations, it appears that the assigned addresses are just incremented in a different way: interface address location LAN: *:DC 0x0 WAN *:DD 0x1002 WLAN 2.4g *:E6 n/a (0x0 + 10) WLAN 5g *:DE 0x6 unused *:DF 0x5006 The MAC address pointed at the label is the one assign to the LAN interface. Signed-off-by: Joao Henrique Albuquerque <joaohccalbu@gmail.com> [add label-mac-device, remove redundant uart status, fix whitespace issues, fix commit message wrapping, remove x bit on DTS file] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: add new target and support for Ubiquiti EdgeRouter 6PDan Brown2021-05-175-7/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ubiquiti EdgeRouter 6P is 6 port router with similar specifications as the EdgeRouter 4, support for which was added in commit dd651e54cc5eadba480a56a7d2c18471e560f491 There are five 10/100/1000 Mbps RJ/Copper ports and one 1000 Mbps SFP port. SoC: Octeon Cavium 7130 (Cavium 3) at 1000MHz Memory: 1GiB DDR3 Flash: 2x2M chips with uboots (chainloaded) + 512K eeprom LEDs: 1x for power status (white/blue, controllable) and 6x for ethernet and SFP ports (no control over them) Buttons: 1x Reset Serial: 1x RJ45 port on front panel. 115200 baud, 8N1 USB: 1x USB3.0 on front panel MII: 1x QSGMII from SoC PHY: 1x Vitesse VSC8504 of which 4 ports are used (phys 4-7) 1x Vitesse VSC8514 of which 2 ports are used (phys 8-9) Network port mapping - eth0 on device maps to lan0 and phy5 - eth1 on device maps to lan1 and phy6 - eth2 on device maps to lan2 and phy7 - eth3 on device maps to lan3 and phy8 - eth4 on device maps to lan4 and phy9 - eth5 (SFP) on device maps to lan5 and phy4 What is not working: - There is no port status available before it goes up - SFP have no additional status and presented as no different from eth - Power-over-ethernet (passive) support has not been tested How to flash the firmware: - copy openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin and openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar to USB flash drive that is formatted to vfat/fat32 - connect USB flash drive to EdgeRouter 6P front USB port - connect serial cable using front RJ45 port (115200 baud, 8N1) - connect power to cable to EdgeRouter 6P - connect terminal to the console to see uboot boot process - interrupt boot by pressing button(s) on your keyboard to log in to the uboot - detect usb connected flash drives by typing to the console: usb start - after drive is detected load initramfs+kernel to the memory by typing: fatload usb 0:1 0x20000000 openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin - after initramfs+kernel is loaded to the memory load it by typing: bootoctlinux 0 numcores=4 endbootargs mem=0 - boot process should finish and you will be greeted with console after pressing enter - create directory to mount usb flash drive to by typing: mkdir /tmp/sda - mount flash drive to that directory by typing: mount /dev/sda1 /tmp/sda - flash firmware to router internal storage by typing: sysupgrade /tmp/sda/openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar - device will reboot and after it gets up you will have edgerouter 6p running openwrt Signed-off-by: Dan Brown <danbrown@gmail.com> [reorder/squash patches, move ethernet@0 to DTS, share image setup] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* octeon: create shared DTSI for Ubiquiti E300 platformDan Brown2021-05-172-194/+206
| | | | | | | | | EdgeRouter 4 and upcoming EdgeRouter 6P and 12 have similar setup, so create a shared DTSI to prevent duplicate code. Signed-off-by: Dan Brown <danbrown@gmail.com> [reorder/squash commits, add description, move ethernet@0 to DTS] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* base-files: change logging for upgrade on fwtoolFlorian Eckert2021-05-171-3/+3
| | | | | | | | | Remove vn call in favour of v call. This commit serves as preparation for removing the v function call. Signed-off-by: Florian Eckert <fe@dev.tdt.de> [alter slightly to prevent double space after colon] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: fix SUPPORTED_DEVICES for ALFA Network devicesPiotr Dymacz2021-05-163-0/+5
| | | | | | | | Vendor firmware expects model name without manufacturer name inside 'supported_devices' part of metadata. This allows direct upgrade to OpenWrt from vendor's GUI. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ath79: set lzma-loader variables to null by defaultMichael Pratt2021-05-161-0/+4
| | | | | | | | | | | | | This fixes a small regression where the lzma-loader variable values are being shared between boards that require different configurations. If not set to "" globally, a device without these settings will just take the last values another device has set before in the queue. Fixes: 1b8bd17c2d07 ("ath79: lzma-loader: allow setting custom kernel magic") Signed-off-by: Michael Pratt <mcpratt@pm.me> [add detailed explanation to the commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* fstools: add missing #define _GNU_SOURCEDaniel Golle2021-05-161-2/+2
| | | | | | asprintf requires _GNU_SOURCE to be defined. Set it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* grub2: bump to 2.06-rc1Stijn Tintel2021-05-163-79/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building GRUB with binutils 2.35.2 or later, an error occurs due to a section .note.gnu.property that is placed at an offset such that objcopy needs to pad the img file with zeros. This in turn causes the following error: "error: Decompressor is too big.". The fix accepted by upstream patches a python script that isn't executed at all when building GRUB with OpenWrt buildroot. There's another patch that patches the files generated by that python script directly, but by including it we would deviate further from upstream. Instead of doing that, simply bump to the latest release candidate. As one of the fixes for the CVEs causes grub to crash on some x86 hardware using legacy BIOS when compiled with -O2, filter -O2 and -O3 out of TARGET_CFLAGS. Fixes the following CVEs: - CVE-2020-14372 - CVE-2020-25632 - CVE-2020-25647 - CVE-2020-27749 - CVE-2020-27779 - CVE-2021-3418 - CVE-2021-20225 - CVE-2021-20233 Runtime-tested on x86/64. Fixes: FS#3790 Suggested-by: Dirk Neukirchen <plntyk.lede@plntyk.name> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* umdns: bump to git HEADStijn Tintel2021-05-161-3/+3
| | | | | | 777a0b service: fix compilation with GCC 10 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* fstools: update to git HEADDaniel Golle2021-05-161-3/+3
| | | | | | | | | | | | c44b40b overlay: fix syncronizing typo b5397a1 fstools: block: fix segfault on mount with no target bd7cc8d block: use dynamically allocated target string 6d8450e blockd: use allocated strings instead of fixed buffers d47909e libblkid-tiny: fix buffer overflow 67d2297 block: match device path instead of assuming /dev/%s 2aeba88 block: allow autofs and umount commands also on MTD/UBI Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2021-05-151-3/+3
| | | | | | | 28b162366d09 mt76: fix calling mt76_get_of_eeprom with an offset for pre-cal data 9d736545bb5a mt76: mt7915: disable pre-calibration support for now Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uclient: update to Git version 2021-05-14Baptiste Jonglez2021-05-141-3/+3
| | | | | | | | 6a6011d uclient-http: set eof mark when content-length is 0 19571e4 tests: fix help usage test for uclient built with sanitizer c5fc04b tests: fix help usage test Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 07:41:54 +0000