aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ath9k: adjust tx power reduction for US regulatory domainFelix Fietkau2017-07-241-0/+23
| | | | | | | FCC regulatory rules allow for up to 3 dBi antenna gain. Account for this in the EEPROM based tx power reduction code. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firmware-utils: drop mktplinkfw-kernel toolPiotr Dymacz2017-07-222-353/+0
| | | | | | | As we can now use combined mode in "mktplinkfw" tool to generate the same header/image, this tool is no longer needed. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: image: use tplink-v1-header in place of mktplinkfw-kernelPiotr Dymacz2017-07-221-13/+8
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* build: move mktplinkfw-combined command to image-commands.mkPiotr Dymacz2017-07-222-18/+13
| | | | | | | | | | We will need "mktplinkfw-combined" command also in the "ramips" target for new MediaTek based TP-Link devices, with "safeloader" image type. Also, rename the command to "tplink-v1-header", use "VERSION_DIST" variable instead of "OpenWrt" and allow passing additional parameters. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* firmware-utils: mktplinkfw: rework combined image optionPiotr Dymacz2017-07-222-62/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | We use combined option in "mktplinkfw" tool for generating initramfs kernel images and header for kernel inside "safeloader" image type (in fact, only for TL-WR1043ND v4 at this moment). There is also "mktplinkfw-kernel" tool, a stripped-down version, used only for generating "simple" header, for safeloader image types. This changes how "mktplinkfw" handles combined images (which then will allow us to drop the stripped-down version of the tool): - drop "ignore size" command line option (it was used only for combined images anyway) - don't require "flash layout id" for combined images (we don't need and shouldn't limit size of the initramfs kernel and for kernels inside safeloader images, the "tplink-safeloader" tool does the size check) - require kernel address and entry point in command line parameters for combined images (consequence of previous point) - don't include md5 sum and firmware length values in header (they are needed only for update from vendor GUI and are ingored in case of initramfs and "tplink-safeloader" images) - drop "fake" flash layout for TL-WR1043ND v4 as it's no longer needed Also, adjust "mktplinkfw-combined" command in ar71xx/image/tp-link.mk to match introduced changes in "mktplinkfw" tool. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: add support for ALFA Network AP121FPiotr Dymacz2017-07-221-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for ALFA Network AP121FPiotr Dymacz2017-07-2213-0/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users. Device is based on Atheros AR9331 WiSoC and is running a custom version (updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR1) - 16 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz - 1x microSD (optional, on separate PCB) - 3x LED, 1x button, 1x switch - UART header on PCB Flash instruction (under U-Boot web recovery mode): 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with RJ45 port, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* firmware-utils: tplink-safeloader: add support for TL-WR902AC v1 USPiotr Dymacz2017-07-221-1/+2
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* samba36: Remove legacy optionsRosen Penev2017-07-222-8/+3
| | | | | | | | | | | | | Browseable is now set through LuCI per share, so remove it. Same with writeable (inverted synonym for read only). domain master and preferred master seem to be legacy settings for Windows 9x. encrypt passwords defaults to yes. Probably should not be disabled either. Also reordered alphabetically. Signed-off-by: Rosen Penev <rosenp@gmail.com> [rewrap commit message, fix SoB, fix author, bump pkg revsion] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mwlwifi: update to version 10.3.4.0 / 2017-07-13Jo-Philipp Wich2017-07-221-3/+3
| | | | | | Ref: https://github.com/lede-project/source/pull/1217 Reported-by: Kabuli Chana <newtownBuild@gmail.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netifd: update to git HEADStijn Tintel2017-07-211-3/+3
| | | | | | | d397e8c netifd: Fix printf calls + function declarations. 34afb76 system-linux: fix GRE ikey/okey endianness Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* Revert "kernel: do not try to probe builtin modules on empty kmod package ↵Jo-Philipp Wich2017-07-211-2/+0
| | | | | | | | | | | install" This change currently causes some issues with loading out of tree kernel modules so revert that commit for now. Reverts commit 34c01e68b5d6b06ce3794ef0e2b06e81ec3ce8ca. Fixes FS#919. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mt76: update to the latest version, fixes stability issuesFelix Fietkau2017-07-211-3/+3
| | | | | | | | 8a649c3 mt7603: mac: code optimization 8dee788 mt7603: mac: stop netdev queues during watchdog reset 3c4c9a6 tx: move state check in mt76_txq_send_burst() Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ipset: split libipset as a subpackageAlexandru Ardelean2017-07-211-6/+15
| | | | | | | | | | | Intent is to link against it, and have the option to not install the ipset utility (if needed). One example/use-case is keepalived (from package) feeds, where it would be nice to just depend on a `libipset` (sub)package. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* ag71xx: add support for port mirroringMilan Krstić2017-07-211-0/+153
| | | | | | | This exposes hardware port mirroring in ag71xx driver (e.g. TL-WR841ND) via swconfig API. Signed-off-by: Milan Krstić <milan.krstic@gmail.com>
* dnsmasq: introduce config support for forced DHCP optionsJo-Philipp Wich2017-07-211-5/+9
| | | | | | | | | | | Introduce a new UCI list setting `list dhcp_option_force` which is available in sections of type `dnsmasq` and `dhcp`. The `dhcp_option_force` setting has the same semantics as `dhcp_option` but generates `dhcp-option-force` directives instead of `dhcp-option` ones in emitted native configuration. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* scripts/download.pl: Adjust URLsDaniel Engberg2017-07-211-5/+5
| | | | | | | | | | | | Internet2 isn't considered a trusted issuer meaning that https links to rit.edu will fail. The host mirror.csclub.uwaterloo.ca has a trusted SSL cert and peering is good so it can replace rit.edu without performance issues. Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net> [Jo-Philipp Wich: rewrapped commit message] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* build: fix invocation of bundled ld.so in SDK and ImagebuilderJo-Philipp Wich2017-07-211-15/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 72d751cba9 "build: rework library bundling" introduced a new helper binary "runas" whose sole purpose was mangling the argv vector passed to the actual called ELF image so that the renamed executable could obtain the proper name from argv[0]. This approach, however totally defeated the purpose of calling bundled ELF executables through the shipped ld.so loader since the execv() invocation performed by "runas" would cause the kernel the interprete the final program image through the system ELF loader again. To solve the problem, use an alternative approach of shipping a shared object "runas.so" which uses an ELF ".init_array" function pointer to obtain the argv[] vector of the to-be-executed main() function and mangle it in-place. The actual argv[0] value to use is communicated out-of-band using an environment variable "RUNAS_ARG0" by the shell wrapper script. The wrapper script also takes care of setting LD_PRELOAD to instruct the shipped ELF loader to preload the actual ELF program image with the "runas.so" helper library. Fixes FS#909. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* brcm47xx: fix switch port mapping on Asus RT-N12 and RT-N16 modelsJo-Philipp Wich2017-07-211-0/+2
| | | | | | | | | | | | | On Asus RT-N12 and RT-N16 models, the WAN and LAN4 ports are swapped in the initial switch configuration since the presets present in nvram appear to be wrong. Add special casing for these models to detect_by_model() in order to ensure a proper switch configuration. Fixes FS#502. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: upgrade: don't loop forever trying to kill processesMatthias Schiffer2017-07-201-1/+10
| | | | | | | | | | When processes don't die on SIGKILL (usually because of kernel bugs), it's better to give up instead of looping forever. upgraded will trigger a reboot in this case (and if this fails, a hardware watchdog will eventually time out and reset the system, if present). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* procd: update to latest versionMatthias Schiffer2017-07-201-4/+4
| | | | | | | | | | 17026f4 system: return ubus error when sysupgrade_exec_upgraded() has failed 13f252f upgraded: Check chroot() return value 85ccb95 init: Check chroot return value in sysupgrade_exec_upgraded() 76dcbee upgraded: improve error handling d749b2a upgraded: register stage2 process in uloop as intended Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: use the RB912UAG-{2, 5}HPnD Power LED for diagSergey Ryazanov2017-07-201-2/+2
| | | | | | | The Power LED of RB912UAG-{2,5}HPnD boards can be controlled by sofware, so use it for diag purposes and make the User LED free for other tasks. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
* ar71xx: keep the RouterBOARD Power LED in On stateSergey Ryazanov2017-07-202-0/+2
| | | | | | | | | | It is quite unexpected behaviour when the Power LED switches off as soon as the kernel starts booting. So set the default state to 'Keep' for the Power LEDs of all RouterBOARDs (e.g. RB91x, SXT Lite series, etc.). Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> [switch the default state to keep instead of on] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for Phicomm K2PChuanhong Guo2017-07-206-4/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It uses one MT7615D radio chip with DBDC mode enabled. This mode allows this single chip act as an 2x2 11n radio and an 2x2 11ac radio at the same time. However mt76 doesn't support it currently so there is no wireless available. Specification: - SoC: MediaTek MT7621AT - Flash: 16 MB - RAM: 128 MB - Ethernet: 1 x WAN (10/100/1000Mbps) and 4 x LAN (10/100/1000 Mbps) - Wireless radio: MT7615D on PCIE0 - UART: 1 x UART on PCB - 57600 8N1 Issue: - Wireless radio doesn't work due to the lack of driver. Flash instruction: Using UART: 1. Configure PC with a static IP address and setup an TFTP server. 2. Put the firmware into the tftp directory. 3. Connect the UART line as described on the PCB. 4. Power up the device and press 2,then follow the instruction to set device and tftp server IP address and input the firmware file name.U-boot will then load the firmware and write it into the flash. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* lantiq: fix sleep with spinlock held in xrx200 network driverAndrea Merello2017-07-202-6/+8
| | | | | | | | | | | | | | | | | | | | | | | In the xrx200_close() function we call napi_disable(), that could sleep, with priv->hw->chan[i].lock held. This could lead to deadlock and causes the kernel to complain. Look at the code I couldn't convince myself about why we need to protect that specific code part with the lock. IMHO there seems no reason to protect the refcount variables, because AFAIK ndo_close() and ndo_open() callbacks are already called with a semaphore held. Neither I could figure out why napi_disable() have to be called with that lock held. The only remaining code part for which I could guess the lock is useful for is ltq_dma_close() function call. This patch reduces the lock to the said function call, avoiding the sleep-with-spinlock-held situation Signed-off-by: Andrea Merello <andrea.merello@gmail.com> [fold into 0025-NET-MIPS-lantiq-adds-xrx200-net.patch, backport to kernel 4.4] Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: do not try to probe builtin modules on empty kmod package installJonas Gorski2017-07-201-0/+2
| | | | | | | | | | | | Builtin modules are always present, and trying to load them will cause modprobe to spew errors when installing the empty kmod packages. Fix this by never generating any postinst module install instructions for builtin modules. Fixes #842. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* uml: Backport upstream fix to build against static libpthreadFlorian Fainelli2017-07-181-0/+139
| | | | | | | | Backport upstream commit f44f1e7da7c8e3f4575d5d61c4df978496903fcc ("um: Avoid longjmp/setjmp symbol clashes with libpthread.a") to fix build issues on hosts that only have a static libpthread. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* toolchain/arc: update to the most recent release arc-2017.03Evgeniy Didin2017-07-1830-27/+27
| | | | | | | | | | arc-2017.03 is the most recent release toolchain for ARC cores and it is based on upstream Binutils 2.28 and GCC 6.3.0 Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: John Crispin <john@phrozen.org> Cc: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: backport remove ping check of configured dhcp addressHans Dedecker2017-07-182-1/+29
| | | | | | | Remove ping check in DHCPDISCOVER case as too many buggy clients leave an interface in configured state causing the ping check to fail. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tools: expat: fix build on older host systemsJo-Philipp Wich2017-07-181-0/+3
| | | | | | | | | | | Expat release 2.2.2 requires support for either syscall(SYS_getrandom) which is available on Linux 3.17 or support for getrandom() which is only available in glibc 2.25 or later. Since some of our builders still run on Linux 3.16, we need to forcibly disable the use of getrandom() for the host builds. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* tools/expat: Update host version to 2.2.2Ted Hess2017-07-171-2/+2
| | | | | | Ref: CVE-2017-9233, CVE-2016-9063 Signed-off-by: Ted Hess <thess@kitschensync.net>
* fstools: update to latestDaniel Golle2017-07-161-4/+4
| | | | | | | 0dfe61a block: support /dev/xvd* nodes f038a61 libfstools: fix matching device name Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* x86: Fix xen serial console by removing conflicting PATA driverBaptiste Jonglez2017-07-162-2/+0
| | | | | | | | | | | | | | | | | | | | | The Xen serial console has been broken since the xen_domu subtarget was merged in the generic x86 subtarget (commits 1d6879ee and 371b382a). The reason for the broken serial console seems to be an IRQ conflict between the serial console driver and the PATA_LEGACY driver: [ 1.330125] genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (platform[pata_legacy.4]) [ 1.330134] hvc_open: request_irq failed with rc -16. [ 1.330148] Warning: unable to open an initial console. Just drop the PATA_LEGACY driver from the x86/generic and x86_64 subtargets, since this driver is marked experimental and only supports very old ISA devices anyway. It is still included in the x86/legacy subtarget where it rightfully belongs. Fixes: FS#787 Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* x86/64: add xen DomU supportBaptiste Jonglez2017-07-162-1/+68
| | | | | | | | | | Xen support for x86/generic was added in 1d6879ee. This commit also enables it for x86/64. This was successfully tested with Xen 4.5, although the serial console is broken in the same way as x86/generic (see FS#787) Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* x86: Move USB support from subtargets to target configBaptiste Jonglez2017-07-165-38/+11
| | | | | | | | | All x86 subtargets enable USB support, so it makes sense to enable it in the target config instead, to avoid duplication. Also refresh subtarget configs accordingly. Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* x86: Refresh subtargets kernel configBaptiste Jonglez2017-07-164-72/+10
| | | | | | | | | | | | | | | | | This was done by simply running `make kernel_menuconfig CONFIG_TARGET=subtarget` and then saving without changing any option. Most of the removed options can be explained because they are already present in the target config or in the generic 4.9 config: - PAE-related options, enabled by default on x86 by 961c0eac - LZO-related options, enabled by default since 4.9 As far as I understand the build system, this shouldn't have any user-visible impact, because the build system already merges the various kernel configs during build. Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* x86: Drop stray subtarget "epia"Baptiste Jonglez2017-07-161-213/+0
| | | | | | | | | This subtarget was added by 961c0eac, probably by mistake. It does not contain anything beside a kernel config. Acked-by: Daniel Golle <daniel@makrotopia.org> Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* treewide: use only board_name function to get nameMathias Kresin2017-07-1520-38/+35
| | | | | | | | | | | | Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree compatible string directly. Always use the board_name function to get the board name. The admswconfig package still reads /proc/cpuinfo directly. The code looks somehow broken and the whole adm5120 which uses this package looks unmaintained. Leave it as it is for now. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: drop target board_name functionsMathias Kresin2017-07-1520-185/+0
| | | | | | They are not used any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: use the generic board_name functionMathias Kresin2017-07-1594-260/+153
| | | | | | Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me>
* sunix: run b53_hack laterMathias Kresin2017-07-151-0/+0
| | | | | | | The script relies on the board name but runs prior the generic sysinfo script which sets the board name. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: do board detection during preinitMathias Kresin2017-07-1513-25/+136
| | | | | | Do the board detection during preinit to unify it across all targets. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: populate boardname and model earlierMathias Kresin2017-07-1517-0/+0
| | | | | | | | | | | | | For targets using the generic board detection and board specific settings in diag.sh, the board name is still unset at the time the set_state() provided by diag.sh is called by 10_indicate_preinit. Change the execution order to ensure the boardname is populated before required the first time. Do the target specific board detection as early as possible, directly followed by the generic one to allow a seamless switch to the generic function for populating /tmp/sysinfo/. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kmod-sched-cake: drop maintainerKevin Darbyshire-Bryant2017-07-151-1/+0
| | | | | | Drop myself from maintainership of 'cake'. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* image: fix ar71xx legacy imagesMathias Kresin2017-07-151-0/+1
| | | | | | | | | | | | | | | | | | If TARGET_PER_DEVICE_ROOTFS and DEVICE_PACKAGES are used for ar71xx legacy images: - an already jffs2 padded squashfs rootfs is overwritten with an unpadded/raw one. - the squashfs-raw and squashfs-64k rootfs are not replaced by the ones including the DEVICE_PACKAGES Call Image/Build/squashfs after the DEVICE_PACKAGES are added to the base squashfs rootfs to fix the issues. Fixes: FS#904 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix GL-inet GL-MT300N-V2 WAN/LAN MAC addressJohn Marrett2017-07-152-1/+4
| | | | | | | | | | | | | | Correct MAC address lookup to appropriate offset based on vendor source. Override the WAN MAC to use the same address as LAN. The switch driver increments the base MAC address for the WAN vlan but the stock firmware uses the same MAC address for all interfaces. Based on vendor source commit https://github.com/domino-team/lede-1701/commit/efb0518 Signed-off-by: John Marrett <johnf@zioncluster.ca>
* imx6: fix DualLite/Solo GW551X board detectionMathias Kresin2017-07-151-1/+1
| | | | | | The model name is a different one in the device tree source file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* nftables: Update to 0.7Nick Brassel2017-07-152-3/+79
| | | | | | Updated nftables to latest. Signed-off-by: Nick Brassel <nick@tzarc.org>
* kernel: update kernel 4.9 to 4.9.37Koen Vandeputte2017-07-1545-316/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Refreshed all patches - Removed upstreamed - Adapted 4 patches: 473-fix-marvell-phy-initialization-issues.patch ----------------------------------------------- Removed hunk 5 which got upstreamed 403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch 404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch -------------------------------------------------------------- Adapted these 2 RFC patches, merging the delta's from an upstream commit (see below) which made it before these 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux- stable.git/commit/?h=v4.9.36&id=97ace183074d306942b903a148aebd5d061758f0 180-usb-xhci-add-support-for-performing-fake-doorbell.patch ----------------------------------------------------------- - Moved fake_doorbell bitmask due to new item Compile tested on: cns3xxx, imx6 Run tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* tools/flex: Revert "tools/flex: add autoreconf"Hauke Mehrtens2017-07-151-1/+0
| | | | | | | | | This was already done in commit 91e262c6b35a7 ("tools: flex: fix build with automake 1.15.1") This reverts commit 6b127d86390f85e92e59f3dba04fa585efb3b2c5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 05:36:03 +0000