aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: kmod-serial-8250: fix linux 5.3 dependenciesMathias Kresin2020-03-161-1/+2
| | | | | | | Beginning with linux 5.3, kmod-serial-8250 uses functions provided by serial_mctrl_gpio.ko if GPIO support is enabled. Signed-off-by: Mathias Kresin <dev@kresin.me>
* generic: make all phy drivers kernel 5.0 compatibleMathias Kresin2020-03-163-0/+21
| | | | | | | | It adjusts the code to upstream changes from the commit 3c1bcc8614db ("net: ethernet: Convert phydev advertize and supported from u32 to link mode") Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: vgv7510kw22: fix missing wirelessMathias Kresin2020-03-161-2/+2
| | | | | | | | | | | | | | | | | | | | For some reason pin 7 (gphy0_led1_pins) need to be set to output prior to loading the PCI driver. Otherwise the wireless doesn't appear on the PCI bus. Of course, it doesn't make much sense, since pin 7 is used to drive the LAN1 led. It can either be done by setting the pins function to GPHY or GPIO + direction output. However, the pinctrl driver doesn't provide a way to switch a pin to GPIO. It is done indirectly by the pinctrl driver at the time a GPIO is requested (requesting a GPIO always resets the function to GPIO). Do it via pinmux driver, as it is always loaded first. Use the GPHY function as it's the pins intended purpose for this board. Fixes: FS#2895 Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: remove maintainer variable from targetsPetr Štetiar2020-03-1634-40/+0
| | | | | | | | | | | | | There is no such role as target maintainer anymore, one should always send corresponding changes for the review and anyone from the commiters is allowed to merge them or eventually use the hand break and NACK them. Lets make it clear, that it is solely a community doing the maintenance tasks. Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Piotr Dymacz <pepe2k@gmail.com>
* ipq40xx: 5.4: fix ethernet driverRobert Marko2020-03-161-29/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 5.4 kernel old u32 array way of setting network features was dropped and linkmode is now the only way. So lets migrate the EDMA driver to support linkmode. Also, old get/set settings API for ethtool is also dropped so lets convert to new ksettings API while at it as it demands linkmode. Now, gigabit works properly as well as ethtool. Previously you would get this in ethtool: root@OpenWrt:/# ethtool eth1 Settings for eth1: Supports Wake-on: d Wake-on: d Current message level: 0x00000000 (0) Link detected: yes Now, features are properly advertised: root@OpenWrt:/# ethtool eth1 Settings for eth1: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 4 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000000 (0) Link detected: yes Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: 5.4: fix networking PHY driverRobert Marko2020-03-162-14/+3
| | | | | | | | In 5.4 kernel old u32 array way of setting network features was dropped and linkmode is now the only way. So lets migrate the PHY driver to support linkmode. Also, now in order for gigabit to work, PHY driver needs to advertise PHY_GBIT_FEATURES instead of PHY_BASIC_FEATURES Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* ipq40xx: 5.4: fix of_get_mac_address obsolete usage OOPsPetr Štetiar2020-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_get_mac_address returns valid pointer or ERR_PTR since 5.2 via commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") so the patch fixes following OOPs on nbg6617: Unable to handle kernel paging request at virtual address ffffffed CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.24 #0 PC is at edma_axi_probe+0x444/0x1114 LR is at bus_find_device+0x88/0x9c Where the PC can be resolved to: >>> l *edma_axi_probe+0x444 0xc067be5c is in edma_axi_probe (./include/linux/string.h:378). >>> l *edma_axi_probe+0x43f 0xc067be57 is in edma_axi_probe (drivers/net/ethernet/qualcomm/essedma/edma_axi.c:936) Which leads to the following code fragment: 935 mac_addr = of_get_mac_address(pnp); 936 if (mac_addr) 937 memcpy(edma_netdev[idx_mac]->dev_addr, mac_addr, ETH_ALEN); Where using mac_addr=0xffffffed (-ENODEV) as source address in memcpy() is causing the OOPs. Acked-by: John Crispin <john@phrozen.org> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* sunxi: add testing 5.4 kernelAleksander Jan Bajkowski2020-03-161-0/+1
| | | | | | Add 5.4 as testing kernel. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* sunxi: move common options from subtargets into target kconfigAleksander Jan Bajkowski2020-03-164-100/+33
| | | | | | These new options are common for all subtargets and can be moved into target kconfig. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* sunxi: refresh config for all subtargetsAleksander Jan Bajkowski2020-03-163-4/+194
| | | | | | | | This was done by executing these command for all subtargets: $ time make -j9 kernel_oldconfig CONFIG_TARGET=subtarget Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* sunxi: remove old symbols from 5.4 kconfigAleksander Jan Bajkowski2020-03-162-14/+0
| | | | | | These options only exist earlier kernel versions. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* sunxi: remove options that are already in generic kconfigAleksander Jan Bajkowski2020-03-163-10/+0
| | | | | | These options are already definied in generic 5.4 kconfig. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: move disabled symbols into generic kconfigAleksander Jan Bajkowski2020-03-164-44/+54
| | | | | | Move some disabled kconfig options found in sunxi kconfig into generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* sunxi: make patches apply cleanly on 5.4Aleksander Jan Bajkowski2020-03-164-125/+3
| | | | | | | | These patches are already in mainline 5.4 kernel: * 010-v5.3-drivers-ata-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch * 101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* sunxi: copy config and patches from 4.19 to 5.4Aleksander Jan Bajkowski2020-03-169-0/+995
| | | | Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* kernel: sort generic configurationAleksander Jan Bajkowski2020-03-162-20/+14
| | | | | | | | | | | | This was done by executing these commands: $ ./scripts/kconfig.pl '+' target/linux/generic/config-4.19 /dev/null > target/linux/generic/config-4.19-new $ mv target/linux/generic/config-4.19-new target/linux/generic/config-4.19 $ ./scripts/kconfig.pl '+' target/linux/generic/config-5.4 /dev/null > target/linux/generic/config-5.4-new $ mv target/linux/generic/config-5.4-new target/linux/generic/config-5.4 Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* x86: switch to 5.4 kernelPetr Štetiar2020-03-161-1/+1
| | | | | | | Seems to be working fine on apu2 and QEMU, it's 99.9% upstream stuff anyway. Lets start wider userbase testing. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: switch to 5.4 kernelPetr Štetiar2020-03-161-1/+1
| | | | | | | | | Seems to be working fine, it's 99.9% upstream stuff anyway. Lets start wider userbase testing. Cc: Tim Harvey <tharvey@gateworks.com> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* rpcd: fix respawn settingsPetr Štetiar2020-03-161-1/+1
| | | | | | | | | | | | | | | | | | | Commit 432ec292ccc8 ("rpcd: add respawn param") has introduced infinite restarting of the service which could be reached over network. This is not recommended security practice as it might give potential adversary infinite number of tries in case there might be some issue in the rpcd or its surrounding stack. So lets remove the currently bogus `respawn_retry` variable (it wasn't possible to override it anyway), reverting to the previous default max. of 5 service restarts which could be now overriden via system's UCI settings if desired. Cc: Jo-Philip Wich <jow@mein.io> Cc: Florian Eckert <fe@dev.tdt.de> Cc: Hauke Mehrtens <hauke@hauke-m.de> Fixes: 432ec292ccc8 ("rpcd: add respawn param") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* curl: bump to 7.69.1Hans Dedecker2020-03-161-2/+2
| | | | | | For changes in 7.69.1; see https://curl.haxx.se/changes.html#7_69_1 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* bcm27xx: sync 5.4 patches with RPi FoundationÁlvaro Fernández Rojas2020-03-16288-6603/+5992
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* wwan: fix hotplug event handlingRozhuk Ivan2020-03-162-2/+3
| | | | | | | | | Hotplug manager send: "remove" -> "add" -> "bind" events, script interpret bind as "not add" = "remove" and mark device as unavailable. Signed-off-by: Rozhuk Ivan <rozhuk.im@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* comgt: fix hotplug event handlingRozhuk Ivan2020-03-162-5/+5
| | | | | | | | | Hotplug manager send: "remove" -> "add" -> "bind" events, script interpret bind as "not add" = "remove" and mark device as unavailable. Signed-off-by: Rozhuk Ivan <rozhuk.im@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* netifd: update to latest git HEADHans Dedecker2020-03-161-3/+3
| | | | | | dbdef93 interface-ip: transfer prefix route ownership for deprecated ipv6addr to kernel Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* bcm27xx: switch to 5.4 kernelPetr Štetiar2020-03-161-2/+1
| | | | | | | | | Been running it for a few days on RPi0W PMS sensor node and on RPi4. Lets start wider userbase testing. Cc: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq806x: read both WG2600HP MAC addresses from flashYanase Yuki2020-03-161-1/+1
| | | | | | | | | WG2600HP has its WLAN MAC addresses at PRODUCTDATA 0xc and 0x12, so use them both directly. Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp> [commit title/message clarification] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ipq806x: remove useless case within default case for upgradeAdrian Schmutzler2020-03-161-1/+0
| | | | | | | The default case will catch anything left, there is no need to explicitly add any device to it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* libnftnl: bump to 1.1.5Kevin Darbyshire-Bryant2020-03-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | Solve missing references to nftnl_set_list_lookup_byname when building iptables with Nftables support enabled (CONFIG_IPTABLES_NFTABLES) Bump the ABI version to force everything to match. /Users/kevin/wrt/staging_dir/toolchain-x86_64_gcc-9.2.0_musl/lib/gcc/x86_64-openwrt-linux-musl/9.2.0/../../../../x86_64-openwrt-linux-musl/bin/ld: xtables_nft_multi-nft-bridge.o: in function `nft_bridge_parse_lookup': nft-bridge.c:(.text.nft_bridge_parse_lookup+0xcd): undefined reference to `nftnl_set_list_lookup_byname' /Users/kevin/wrt/staging_dir/toolchain-x86_64_gcc-9.2.0_musl/lib/gcc/x86_64-openwrt-linux-musl/9.2.0/../../../../x86_64-openwrt-linux-musl/bin/ld: xtables_nft_multi-nft-cache.o: in function `nftnl_set_list_cb': nft-cache.c:(.text.nftnl_set_list_cb+0x80): undefined reference to `nftnl_set_list_lookup_byname' /Users/kevin/wrt/staging_dir/toolchain-x86_64_gcc-9.2.0_musl/lib/gcc/x86_64-openwrt-linux-musl/9.2.0/../../../../x86_64-openwrt-linux-musl/bin/ld: xtables_nft_multi-nft-cache.o: in function `fetch_set_cache': nft-cache.c:(.text.fetch_set_cache+0x10a): undefined reference to `nftnl_set_list_lookup_byname' collect2: error: ld returned 1 exit status make[6]: *** [xtables-nft-multi] Error 1 make[5]: *** [all] Error 2 make[4]: *** [all-recursive] Error 1 make[3]: *** [all] Error 2 make[2]: *** [/Users/kevin/wrt/build_dir/target-x86_64_musl/linux-x86_64/iptables-1.8.4/.built] Error 2 make[2]: Leaving directory `/Users/kevin/wrt/package/network/utils/iptables' Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: make kmod-i2c-mux selected by dependent modulesSungbo Eo2020-03-164-6/+6
| | | | | | | | | | | | Currently kmod-i2c-mux-* will not get into images unless kmod-i2c-mux is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-i2c-mux-pca954x Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* oxnas: rework 02_networkSungbo Eo2020-03-161-9/+25
| | | | | | | Just like other targets do, introduce two setup functions for interfaces and MAC addresses. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* oxnas: use dt-bindings macros for GPIOSungbo Eo2020-03-163-14/+19
| | | | Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* oxnas: merge Pogoplug V3 DTS patches into one fileSungbo Eo2020-03-165-88/+82
| | | | | | | As it seeems these patches are for OpenWrt and they are not going to be merged to mainline, let's merge them to improve maintainability. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* oxnas: sort kernel configsSungbo Eo2020-03-163-29/+29
| | | | Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* oxnas: remove duplicate config optionsSungbo Eo2020-03-163-34/+0
| | | | | | Remove symbols already covered by generic and target kernel configs. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* oxnas: use AddDepends in modules.mkSungbo Eo2020-03-161-6/+2
| | | | Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* oxnas: harmonize line breaks in ox820.mkSungbo Eo2020-03-161-12/+14
| | | | | | | | | Follow the guideline suggested in e417ff88f19b ("ramips: harmonize line breaks in image Makefiles"). While at it, fix typos in the device title of Akitio MyCloud. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* lantiq: move mux for pins into subnodesMathias Kresin2020-03-153-115/+161
| | | | | | | | | | | The mux need to be defined in a subnode to be considered by the pinctrl framework. These muxes aren't set as expected and might cause not working subsystems. Fixes: 8e7b573b7aa4 ("lantiq: dts: assign the PCI pins to the PCI controller node") Fixes: dcb5e52209e5 ("lantiq: dts: assign the STP pins to the STP GPIO controller node") Fixes: 660200e53d62 ("lantiq: dts: assign the GPHY LED pins to the Ethernet controller node") Signed-off-by: Mathias Kresin <dev@kresin.me>
* iproute2: revert add libcap support, enabled in ip-fullMathias Kresin2020-03-151-9/+9
| | | | | | | | | | | | | This reverts commit a6da3f9ef746101b84a6f530f5a40de28341b69a. The libcap isn't as optional as the commit messages suggests. A hard dependency to the libcap package is added, which is only available in the external packages feed. Therefore it is impossible to package ip-full without having the external packages feed up and running, which is a regression to the former behaviour. Signed-off-by: Mathias Kresin <dev@kresin.me> Acked-by: Hans Dedecker <dedeckeh@gmail.com>
* pkgconf: always retain -I and -L flagsJo-Philipp Wich2020-03-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The pkgconf fork filters -I and -L flag values from .pc files which match pkgconf's builtin system directory value. During configure, pkgconf derives the default system include and library search path values from exec_prefix, which is set to staging_dir/host in the host tool build phase. Due to that, pkgconf will drop all -I and -L flags pointing to staging_dir/host/include or staging_dir/host/lib, unless invoked with --keep-system-cflags and --keep-system-libs respectively, breaking our kernel libelf discovery / stack validation workarounds. In order to inhibit the filtering, add --keep-system-cflags and --keep-system-libs to our pkg-config shell wrapper. Fixes: GH#2832 Fixes: 867298cf47 ("tools/pkg-config: Replace with pkgconf") Ref: https://lists.infradead.org/pipermail/openwrt-devel/2020-March/022182.html Ref: https://git.openwrt.org/fe43969336201f2cc7d103b68fd6e65989bee184 Signed-off-by: Jo-Philipp Wich <jo@mein.io> Acked-by: Petr Štetiar <ynezz@true.cz>
* odhcpd: update to latest git HEADHans Dedecker2020-03-151-3/+3
| | | | | | | | 6594c6b ubus: use dhcpv6 ia assignment flag a90cc2e dhcpv6-ia: avoid setting lifetime to infinite for static assignments bb07fa4 dhcpv4: avoid setting lifetime to infinite for static assignments Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* iptables: update to 1.8.4Kevin Darbyshire-Bryant2020-03-153-29/+14
| | | | | | | | | | | | | | | | Bump to iptable 1.8.4 and address packaging issue as mentioned in the original bump/revert cycle. "This reverts commit 10cbc896c0a26aecff37261450c21f29fb5b99db. The updated iptables package does not build due to the following error encountered on the buildbots: cp: cannot stat '.../iptables-1.8.4/ipkg-install/usr/lib/libiptc.so.*': No such file or directory The changelog mentions "build: remove -Wl,--no-as-needed and libiptc.so" so it appears as if further packaging changes are needed beyond a simple version bump." Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ipq40xx: 5.4: enable NANDRobert Marko2020-03-151-0/+5
| | | | | | | | | | Lets enable RAW NAND and Qcom NANDC drivers again in kernel 5.4. They were dropped when 5.4 support was introduced due to upstream changing the symbol names so refreshing was not enough. Signed-off-by: Robert Marko <robert.marko@sartura.hr> [cut long line in commit message, enabled BCH as well] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: fix missing watchdog core dependency for hwmon-sch5627David Bauer2020-03-151-0/+1
| | | | | | | | | | | | | Fixes following error uncovered while building ath79/tiny on 5.4: Package kmod-hwmon-sch5627 is missing dependencies for the following libraries: watchdog.ko See the similar commit e546e6252bb1 ("malta: fix missing watchdog core dependency for hwmon-sch5627") for a detailed explanation. Signed-off-by: David Bauer <mail@david-bauer.net>
* mvebu: use generic diag.shSungbo Eo2020-03-152-48/+50
| | | | | | | | | This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Signed-off-by: Sungbo Eo <mans0n@gorani.run> Tested-by: Ansuel Smith <ansuelsmth@gmail.com> [wrt3200acm @ 5.4]
* ath79: add correct phy-mode for QCA9563 boardsDavid Bauer2020-03-152-0/+2
| | | | | | | | | | | | | | | The TP-Link RE450 as well as the UniFi AC series missed the phy-mode property. Because of this, the incorrect MII phy-mode from the root dtsi was used. With Kernel 5.4, this leads to problems when used with a AR8033 PHY. The bootloader seems to leave the fiber pages selected. As there's not switch to copper pages happening in at803x_config_init due to the incorrect phy-mode, the new at803x_read_status will interpret the status of the SGMII side as the status of the copper side. Signed-off-by: David Bauer <mail@david-bauer.net>
* apm821xx: 4.14: remove kernel config and patchesChristian Lamparter2020-03-1460-8847/+0
| | | | | | | | This patch removes the 4.14 kernel support from the apm821xx target. The 4.19 kernel has been available and stable for a while and the 5.4 kernel support has been tested successfully on real hardware as well. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* build: fix kernel 5.4 on macosKevin Darbyshire-Bryant2020-03-142-0/+28
| | | | | | | | | | As part of the kernel build process there are utilities built to run on the host system that expect linux kernel headers to be available. Unfortunately macos/darwin doesn't have these headers. vdso2c requires types.h so provide a minimal stub to satisfy it. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath79: use downstream ag71xx for Kernel 5.4David Bauer2020-03-1314-178/+37
| | | | | | | | | | | | | | | | | | | The ag71xx driver from Linux 5.4 currently has various shortcomings when used with OpenWrt compared to our downstream version. For example, the upstream driver does not support modifying the ethernet clock and configuring RGMII delays on the MAC side. While we should certainly switch to the upstream driver, the amount of necessary patches would make it cumbersome to work with. It's also highly likely we won't be able to finish patching the upstream driver in time for a Linux 5.4 release. Tested on Siemens WS-AP3610. CC: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David Bauer <mail@david-bauer.net> Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
* procd: update to latest git HEADDaniel Golle2020-03-131-4/+4
| | | | | | 77a6782 jail: mount-bind /etc/resolv.conf for non-netns jails Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: convert leading spaces to tabs in functions.shAdrian Schmutzler2020-03-131-2/+2
| | | | | | Use tabs for indent consistently. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>