aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ar71xx: switch CPE/WBS 210/510 to okli-loaderMatthias Schiffer2018-06-061-1/+4
| | | | | | | | | | | | | | | | | | | | | We recently increased the kernel partition size of the CPE/WBS 210/510. This works fine for new installations of the factory image, but on sysupgrades, the partition table read by the bootloader is not adjusted. This limits the maximum size of the kernel loaded by the bootloader to the old partition size. While adjusting the partition table would be a cleanest solution, such a migration would have to happen before an upgrade to a new version with a newer kernel. This is error-prone and would require a two-step upgrade, as we mark the partition table partition read-only. Instead, switch from the lzma-loader with embedded kernel to the okli-loader, so only the tiny lzma-loader is loaded by the bootloader as "kernel", and the lzma-loader will then load the rest of the kernel by itself. Fixes: e39847ea2f70 ("ar71xx: increase kernel partition size for CPE/WBS 210/510") Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ath79: lzma-loader: sync with ar71xx targetMatthias Schiffer2018-06-067-11/+29
| | | | | | | | | | | | | | Import all improvements made in the lzma-loader since development on the ath79 target started. This also reverts fe594bf90d09 ("ath79: fix loader-okli, lzma-loader"), as is obsoleted by 2ad60168b6af ("ar71xx: lzma-loader: move padding workaround to gzip step"). Likely, many of the changes should be ported to the ramips lzma-loader as well, but I don't have a device to test this. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: make loader-okli build step more genericMatthias Schiffer2018-06-061-2/+3
| | | | | | Add support for different loader types. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: lzma-loader: constify kernel argv arrayMatthias Schiffer2018-06-061-1/+1
| | | | | | | By making the kernel argv array const, the .data section can always be omitted from the laoder binary. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: lzma-loader: set page size to 4KBMatthias Schiffer2018-06-061-1/+1
| | | | | | | | The text section in the ELF loader is aligned to the maximum page size, which defaults to 64KB. Reduce it to the actual page size to avoid wasting flash space for this alignment. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ar71xx: lzma-loader: move padding workaround to gzip stepMatthias Schiffer2018-06-062-2/+5
| | | | | | | | | | | | | | | | | | | | | | | Some devices (TP-Link TL-WR1043ND v1) don't boot reliably when the uncompressed loader is too small. This was workarounded in the loader by adding 512KB of padding to the .data section of the loader binary. This approach had two issues: - The padding was only working when .data was non-empty (otherwise the section would become NOBITS, omitting it in the binary). .data was only empty when no CMDLINE was set, leading to further workarounds like fe594bf90d09 ("ath79: fix loader-okli, lzma-loader"), and this workaround was only effective because a missing "const" led to the kernel argv being stored in .data instead of .rodata - The padding was not only added to the compressed .gz loader, but also uncompressed .bin and .elf loaders. The prevented embedding the kernel cmdline in the loader for non-gz loader types. To fix both issues, move the creation of the padding from the linker script to the gzip step. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: fix UCI config parsing and callback handlingTony Ambardar2018-06-062-9/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are several long-standing issues present in the UCI shell API as documented in https://wiki.openwrt.org/doc/devel/config-scripting. They relate both to high-level, user-defined callback functions used to process UCI config files, and also to low-level functions used within scripts generally. The related problems have been encountered now and in the past, e.g. https://forum.openwrt.org/viewtopic.php?id=54295, and include: a) UCI parsing option() function and user-defined option_cb() callbacks being erroneously called during processing of "list" config file entries; b) normal usage of the low-level config_set() unexpectedy calling any defined option_cb() if present; and c) handling of the list_cb() not respecting the NO_CALLBACK variable. Root causes include a function stack "inversion", where the low-level config_set() function incorrectly calls the high-level option() function, intended only for processing the "option" keyword of UCI config files. This change addresses the inversion and other issues, making the option handling code more consistent and smaller, and simplifying developers' usage of UCI callbacks. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* kernel: bump 4.14 to 4.14.48Stijn Tintel2018-06-0546-383/+550
| | | | | | | | | | | | | | | | | | Remove upstreamed patches: generic/pending/101-clocksource-mips-gic-timer-fix-clocksource-counter-w.patch generic/pending/103-MIPS-c-r4k-fix-data-corruption-related-to-cache-coherence.patch generic/pending/182-net-qmi_wwan-add-BroadMobi-BM806U-2020-2033.patch lantiq/0025-MIPS-lantiq-gphy-Remove-reboot-remove-reset-asserts.patch Update patches that no longer apply: generic/pending/811-pci_disable_usb_common_quirks.patch ath79/0009-MIPS-ath79-add-lots-of-missing-registers.patch Fixes CVE-2018-6412. Compile-tested: octeon, x86/64. Runtime-tested: octeon, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* scripts: Replace obsolete POSIX tmpnam in slugimage.pl with File::Temp functionTed Hess2018-06-051-4/+4
| | | | Signed-off-by: Ted Hess <thess@kitschensync.net>
* hostapd: properly build hostapd-only SSL variantsDaniel Golle2018-06-051-11/+11
| | | | | | | Make sure hostapd-openssl is actually build against OpenSSL, same for wolfSSL. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: modules: package module for Exar 8250 UARTsDaniel Golle2018-06-052-0/+97
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport patch to fix dst handling for offloaded connectionsFelix Fietkau2018-06-051-0/+49
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: expose device taxonomy signature via ubusFelix Fietkau2018-06-051-0/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for client taxonomy in the full configFelix Fietkau2018-06-052-5/+29
| | | | | | | This can be used to fingerprint clients to try to identify the exact model Signed-off-by: Felix Fietkau <nbd@nbd.name>
* gcc: remove support for version 6.3.0Felix Fietkau2018-06-0526-929/+0
| | | | | | It is obsoleted by gcc 7 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-06-051-3/+3
| | | | | | | | | | | | | | | 20c0766 mt7603: adjust rx hang watchdog for MT7628 664e321 mt7603: add extra PSE hang check signature for MT7628 f24b56f update MT7628 firmware to the latest version d87e4b0 mt7603: clear PSE reset bit if PSE reset fails 0ef26ef mt76: only stop tx queues on offchannel, not during the entire scan f399da3 mt76: prevent tx scheduling during channel change 21c1e1e mt76: move ieee80211_hw allocation to common core 730c292 mt76: wait for pending tx to complete before switching channel fcbb49e mt76x2: use udelay instead of usleep_range in mt76x2_mac_stop 792dbe0 mt7603: do not hold dev->mutex while flushing dev->mac_work Signed-off-by: Felix Fietkau <nbd@nbd.name>
* map: make tunnel encapsulation limit support configurable (FS#1501)Hans Dedecker2018-06-042-8/+10
| | | | | | | | | | | | Be compatible with ISPs which don't support the destination option header containing the tunnel encapsulation limit as reported in FS#1501. Setting the uci parameter encaplimit to ignore; allows to disable the insertion of the destination option header in the map-e packets. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit uci parameter accordingly. If no encaplimit value is specified the default value is 4 as before. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to latest git HEAD (FS#1501)Hans Dedecker2018-06-041-4/+4
| | | | | | a580028 system-linux: make encaplimit configurable for ip6 tunnels (FS#1501) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: make ds-lite/map tunnel encapsulation limit support configurable ↵Hans Dedecker2018-06-043-3/+9
| | | | | | | | | | | | | | (FS#1501) Be compatible with ISPs which don't support the destination option header containing the tunnel encapsulation limit as reported in FS#1501 for dynamic created ds-lite/map interfaces. Setting the uci parameter encaplimit_dslite/map to ignore; allows to disable the insertion of the destination option header for the dynamic created ds-lite/map interface. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit_dslite/map uci parameter accordingly. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ds-lite: make tunnel encapsulation limit support configurable (FS#1501)Hans Dedecker2018-06-042-3/+7
| | | | | | | | | | | | Be compatible with ISPs which don't support the destination option header containing the tunnel encapsulation limit as reported in FS#1501. Setting the uci parameter encaplimit to ignore; allows to disable the insertion of the destination option header in the ds-lite packets. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit uci parameter accordingly. If no encaplimit value is specified the default value is 4 as before. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mvebu: fix broken console on WRT32X (venom)Michael Gray2018-06-013-0/+208
| | | | | | | | | | | | | | | The console bootarg is being corrupted on boot, causing various issues including broken sysupgrade. Utilising the bootargs mangle patch from other targets, hardcode the console arguments and fetch the rootfs from the bootloader. Kernel command line: console=ttyS0,115200 root=/dev/mtdblock8 Bootloader command line (ignored): console= root=/dev/mtdblock8 Please cherry pick to 18.06 too Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
* oxnas: bring in new oxnas targetDaniel Golle2018-06-0139-0/+6351
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Reboot the oxnas target based on Linux 4.14 by rebasing our support on top of the now-existing upstream kernel support. This commit brings oxnas support to the level of v4.17 having upstream drivers for Ethernet, Serial and NAND flash. Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the new platform code and device-tree. Re-introduce base-files from old oxnas target which works for now but needs further clean-up towards generic board support. Functional issues: * PCIe won't come up (hence no USB3 on Shuttle KD20) * I2C bus of Akitio myCloud device is likely not to work (missing debounce support in new pinctrl driver) Code-style issues: * plla/pllb needs further cleanup -- currently their users or writing into the syscon regmap after acquireling the clk instead of using defined clk_*_*() functions to setup multipliers and dividors. * PCIe phy needs its own little driver. * SATA driver is a monster and should be split into an mfd having a raidctrl regmap, sata controller, sata ports and sata phy. Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-oxnas: fix build with newer GCCDaniel Golle2018-06-012-0/+593
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: kill old oxnas targetDaniel Golle2018-06-0162-15085/+0
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* netifd: drop conflicting 'device' interface propertyIvan Shapovalov2018-06-013-5/+1
| | | | | | | | | | Do not set device runtime property on interfaces in the hotplug handler and in fixup_interfaces(). This property conflicts with device option in several proto handlers (mainly QMI and other WWAN/3G protos) and does not seem to be used anywhere. Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* kernel: re-add export ipv6_push_frag_opts for tunneling now patchHans Dedecker2018-06-012-0/+31
| | | | | | | The patch got removed by commit 7dca1bae82 (kernel: bump to 4.9.105) but is still required as ipv6_push_frag_opts needs to be exported. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* Revert "ramips: Move PCI driver to files directory"John Crispin2018-06-012-837/+842
| | | | | | This reverts commit a098a78a33a6b096d15c9982b5d6457988e09f03. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: Remove redundant owner assignment"John Crispin2018-06-011-0/+1
| | | | | | This reverts commit 2ad4daf5794b08878467c1dac5bef7487109e4da. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: improve interrupt mapping"John Crispin2018-06-012-14/+69
| | | | | | This reverts commit 5f7396ebef09b224edf08b0bda113613a42f0928. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: remove conditional compilation."John Crispin2018-06-011-8/+58
| | | | | | This reverts commit 1f786257147f978ce4c5750fdc404851453fafcb. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: remove unnecessary resource details."John Crispin2018-06-011-2/+15
| | | | | | This reverts commit edea934799911c54ffa7024ef9a650f9dfc8c695. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: pci: sync with staging driver"John Crispin2018-06-011-150/+168
| | | | | | This reverts commit e07baec9faf487fd143976636025b5da55e13c20. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: Add back some non-mt7621 code that staging removed"John Crispin2018-06-011-17/+1
| | | | | | This reverts commit 048e41f6496697863cc7d73ab95fa89a6ddf2470. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "ramips: Fix WiFi after 5f7396ebef09b224edf08b0bda113613a42f0928"John Crispin2018-06-0121-0/+82
| | | | | | This reverts commit 02f815d1907cdd7e042415a2b4a749c819087168. Signed-off-by: John Crispin <john@phrozen.org>
* nettle: bump to 3.4Kevin Darbyshire-Bryant2018-06-011-2/+2
| | | | | | | | | | | 3.4 is mainly a bug fix/maintenance release. 3KB increase in ipk lib size on mips. Compile tested for: ar71xx, ramips Run tested on: ar71xx Archer C7 v2, ramips mir3g Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mtd: mark as nonshared to fix FS#484Mirko Parthey2018-06-011-0/+2
| | | | | | | | | | The mtd tool is built with different configurations depending on the target. For example, brcm47xx adds the fixtrx subcommand, without which an image fails when booting the second time. Mark the mtd package as nonshared to really fix FS#484. Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
* kernel: bump to 4.9.105Kevin Darbyshire-Bryant2018-06-0136-642/+400
| | | | | | | | | | | | | | | Refresh patches. Drop patches that have been upstreamed: target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch target/linux/generic/backport-4.9/095-v4.12-ipv6-Need-to-export-ipv6_push_frag_opts-for-tunnelin.patch target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch target/linux/generic/pending-4.9/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch target/linux/generic/pending-4.9/182-net-qmi_wwan-add-BroadMobi-BM806U-2020-2033.patch Compile & run tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ath79: correct wmac names in dtsAlex Maclean2018-06-012-2/+2
| | | | Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* ath79: add TP-Link TL-WR703N portAlex Maclean2018-06-013-0/+150
| | | | Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* ath79: add TP-Link TL-WR740N/ND v2 portAlex Maclean2018-06-015-0/+197
| | | | Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* ath79: add pinmux node to ar724x.dtsiAlex Maclean2018-06-011-0/+15
| | | | Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* ath79: add AR7240 dtsiAlex Maclean2018-06-011-0/+66
| | | | Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* ath79: add tiny subtargetAlex Maclean2018-06-018-79/+120
| | | | Signed-off-by: Alex Maclean <monkeh@monkeh.net>
* ath10k-ct: Update driver to latestKoen Vandeputte2018-06-011-3/+3
| | | | | | | | | | 127f98189ee5 ath10k: Fix bad return w/out unlock, compile w/out debugfs b8f48f3c138f Fix survey-dump for 4.7, 4.9 and 4.13 kernels. fa8259ad5d6d ath10k-ct: Support survey dump in 10.1 firmware. 2853e1337ecf ath10k-ct: Add 4.16 ath10k-ct driver to package. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> CC: Ben Greear <greearb@candelatech.com>
* ath79: fix glinet ar150 lan/wan orderingJohn Crispin2018-06-011-0/+4
| | | | | | LAN and WAN were swapped Signed-off-by: John Crispin <john@phrozen.org>
* Revert "kernel: backport export ipv6_push_frag_opts for tunneling now"Daniel Golle2018-06-012-31/+0
| | | | | | | | | This reverts commit daa73b63d5dc5eb264341336c0d7cd64d750664d. The fix has already been imported by commit b7735d8113 ("kernel: import follow-up fix for previous backport"). The patch won't apply twice. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport export ipv6_push_frag_opts for tunneling nowHans Dedecker2018-05-312-0/+31
| | | | | | | Patch is required on top of commit 6c81c27efa as ipv6_push_frag_opts needs to be exported for usage in ip6_tunnel.c Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* wireguard: bump to 0.0.20180531 to fix flow offloadingJason A. Donenfeld2018-05-311-6/+5
| | | | | | | | | | This version bump was made upstream mostly for OpenWRT, and should fix an issue with a null dst when on the flow offloading path. While we're at it, Kevin and I are the only people actually taking care of this package, so trim the maintainer list a bit. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* kernel: import follow-up fix for previous backportDaniel Golle2018-05-311-0/+36
| | | | | | | | Buildbots complaining made me wonder what's going on... ERROR: "ipv6_push_frag_opts" [net/ipv6/ip6_tunnel.ko] undefined! Fixes: 6c81c27efa ("kernel: backport fix for missing tunnel encapsulation limit option") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: update packaging and patchesDaniel Golle2018-05-3137-496/+417
| | | | | | | | | | Clean up conflicts/provides/depends hell and add PROVIDES for eapol-test variants while at it. Update mesh-DFS patchset from Peter Oh to v5 (with local fixes) which allows to drop two revert-patches for upstream commits which previously were necessary to un-break mesh-DFS support. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 05:32:59 +0000