aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* treewide: dts: fix dtc compiler warningsMathias Kresin2016-11-128-57/+10
| | | | | | | | | | | Fixes invalid device tree parameters. Drop the mvsw61xx node used in mvebu device tree source files. It looks like some kind of ethernet switch cargo cult. Neither the marvell,88e6352 nor the marvell,88e6172 compatible strings can be found in any LEDE file or in the kernel sources. Signed-off-by: Mathias Kresin <dev@kresin.me>
* apm821xx: remove replaced netgear, wndr4700-usb dwc2 definitonChristian Lamparter2016-11-121-48/+0
| | | | | | | This special dwc2 device definition for the Netgear WNDR4700 has been replaced by amcc,usb-otg-405ex. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: consolidate apm821xx device trees filesChristian Lamparter2016-11-126-1472/+990
| | | | | | | | | | | | | This patch moves the common SoC device tree entries from the currently four supported platforms into a common apm82181.dtsi. Furthermore, this patch also changes the GPIO, IRQ and input definitions of the supported platforms to use the defined dt-bindings macros for GPIO_ACTIVE_LOW|HIGH, KEY_WPS|RESTART|*, IRQ_TYPE_* when it's appropriate. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add amcc, usb-otg-405ex devicetree definitionChristian Lamparter2016-11-121-0/+44
| | | | | | | | | | | This patch adds support for the amcc,usb-otg-405ex device which is found in all APM82181 SoCs. Note: The system can't use the generic "snps,dwc2" compatible because of the special ahbcfg configuration. The default GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang when the USB and SATA is used concurrently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* lantiq: fix pci issue if mem kernel parameter is usedEddi De Pieri2016-11-121-0/+22
| | | | | | | | | | | | | | | | | | | | As specified by e0229a16b0001c08e6c2611fa0bb9814507fced4 if the VR9 based router provides FXS ports and they should enabled then the following must added to the kernel command line: mem=[TOTALMEMSIZE-2M] vpe1_load_addr=ADDRESS vpe1_mem=2M By adding mem= parameter a pci device stop working correctly. The pci-lantiq.c module use get_num_physpages() to compute dynamically the memory amount of the board. The mem= make the module to compute in the wrong way the BAR11MASK, so in this situation the mask is misaligned with the dma area that the hardware expects. This patch is a port of what legacy ifxmips_pci.c does. Signed-off-by: Eddi De Pieri <eddi@depieri.net>
* iw: fix build error caused by redeclaration of NL80211_ATTR_PADRafał Miłecki2016-11-121-6/+2
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 7aff00ab199 ("iw: update to version 4.9")
* iw: update to version 4.9Rafał Miłecki2016-11-125-88/+24
| | | | | | | This adds support for "channels" command which displays more details about channels. It includes e.g. info about available widths. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* iw: update to version 4.7Rafał Miłecki2016-11-128-634/+48
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ar71xx: generate region-coded factory images for TP-Link TL-WR841ND v11Matthias Schiffer2016-11-111-0/+3
| | | | | | | | The latest stock firmwares for US and EU regions have started checking the region code. Tested-by: Andreas Ziegler <ml@andreas-ziegler.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* arm64: boot-wrapper: add mirror checksumJo-Philipp Wich2016-11-101-0/+1
| | | | | | | | Some builders have troubles cloning the boot-wrapper-aarch64.git repository so provide a mirror checksum to allow downloading from sources.lede-project.org instead. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: Prefer busybox arp over /proc/net/arp aliasMarek Lindner2016-11-101-1/+1
| | | | | | | | | A firmware compiled with BUSYBOX_CONFIG_ARP should also use by default the arp binary from busybox. Otherwise the extra functionality the user requested can only be used when running arp with the path to the binary. Signed-off-by: Marek Lindner <marek.lindner@open-mesh.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ramips: add TEW-691GR/TEW-692GR 2.4 GHz interface mac addressesMathias Kresin2016-11-092-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assign an unused MAC addresses to the 2.4GHz wifi interface as it was originally planed but not possible. The MAC address numbering of the TEW-691GR changes to the following pattern: LAN: AA:BB:CC:DD:EE:0C WIFI: AA:BB:CC:DD:EE:0D WAN: AA:BB:CC:DD:EE:0F The MAC address numbering of the TEW-692GR changes to the following pattern: LAN: AA:BB:CC:DD:EE:e4 WAN: AA:BB:CC:DD:EE:e5 2.4GHz: AA:BB:CC:DD:EE:e7 5 GHz: AA:BB:CC:DD:EE:e8 Set the label and compatible string for the TEW-692GR PCIe wireless according to the the PCI binding documentation. Use the wifi@0,0 label and the pci0,0 compatible string since the PCI vendor and device id is unknown. It should work anyway since the compatible string isn't evaluated (yet). Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use the ralink,mtd-eeprom device tree propertyMathias Kresin2016-11-097-33/+26
| | | | | | | | | | | | | | | | | | | | | Use the ralink,mtd-eeprom instead of invoking the userspace firmware loader. Set the label and compatible string according to the the PCI binding documentation. Use the wifi@0,0 label and the pci0,0 compatible string in case the PCI vendor and device id is unknown. It should work anyway since the compatible string isn't evaluated (yet). This commit might fixes the PCIe wireless for the Buffalo WHR-600D. This board was mentioned in the board 10-rt2x00-eeprom firmware hotplug script but never had the correct eeprom name set to trigger the firmware from flash extraction. Use the usual eeprom for the soc wmac of the Dovado Tiny AC. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: drop ralink eeprom handling functionMathias Kresin2016-11-091-73/+9
| | | | | | | The eeprom handling function from the rt2x00 driver is used and this code is obsolete. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: use the device tree bindings from rt2x00 driverMathias Kresin2016-11-0911-170/+136
| | | | | | | | | | | | | Set a device specific wireless mac address for ARV7506PW11, VGV7519 and VGV7510KW22. The one from the EEPROM is a generic one and the same on all boards. Use the wifi@0,0 label and the pci0,0 compatible string for the ARV7519PW and ARV7525PW since the pci vendor and device id is unknown. It should work anyway since the compatible string isn't evaluated (yet). Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix VGV7519 and VGV7510KW22 mac addressesMathias Kresin2016-11-093-4/+5
| | | | | | | | | | | | | | | | | The VGV7510KW22 stock firmware uses the following mac-addresses: lan (ifno 1): AA:BB:CC:DD:EE:60 wlan (ifno 2): AA:BB:CC:DD:EE:61 atm0 (ifno 3): AA:BB:CC:DD:EE:62 atm1/wan (ifno 4): AA:BB:CC:DD:EE:63 The VGV7519 stock firmware uses the following mac-addresses: lan: AA:BB:CC:DD:EE:EF wlan: AA:BB:CC:DD:EE:EF wan: AA:BB:CC:DD:EE:EE Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: rt2x00: add support for mac addr from device treeMathias Kresin2016-11-0911-90/+197
| | | | | | | Backport upstream accepted patch which allows to override the EEPROM mac address with one from device tree. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: rt2x00: fold patchesMathias Kresin2016-11-093-48/+17
| | | | | | | | The patch 615-rt2x00-fix_20mhz_clk.patch fixes code introduced by 611-rt2x00-rf_vals-rt3352-xtal20.patch and makes the the platform data property clk_is_20mhz obsolete. Signed-off-by: Mathias Kresin <dev@kresin.me>
* x86: bump default kernel partition size to 16MFelix Fietkau2016-11-091-1/+1
| | | | | | | This leaves more room for sysupgrade config data or for having multiple kernel images to choose from Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "devel/strace: fix build on mpc85xx target"Jo-Philipp Wich2016-11-081-14/+0
| | | | | | | | | | | | | | | | | This reverts commit 519a199cbcc0930e229ddd7087309326a846bdce. Multiple users have reported building failures on ARM architectures, e.g.: In file included from defs.h:42:0, from process.c:37: process.c:51:22: error: 'struct user_regs' has no member named 'ARM_r0' #define uoff(member) offsetof(struct user, member) ^ ./linux/arm/userent.h:1:3: note: in expansion of macro 'uoff' { uoff(regs.ARM_r0), "r0" }, ^ Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: select kmod-phy-bcm-ns-usb* from kmod-usb* for bcm53xxFelix Fietkau2016-11-081-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix kernel relocate stub parallel build issueFelix Fietkau2016-11-081-4/+5
| | | | | | Use per-kernel directory Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: use upstreamed patch for BCM53573 support in bcm47xxsflashRafał Miłecki2016-11-081-2/+4
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* firewall: update to fix FS#31, FS#73, FS#154, FS#248Jo-Philipp Wich2016-11-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update to latest Git head in order to import several fixes and enhancements. - Disable drop invalid by default (FS#73, FS#154) Instead of dropping packets with conntrack state INVALID, only allow streams with explicit NEW or UNTRACKED conntrack state. This change gives user defined rules the chance to accept traffic like ICMPv6 multicast which would be filtered away by the very early ctstate INVALID drop rule otherwise. The old behaviour can be restored by explicitely setting "drop_invalid" to 1 in the global firewall config section. - Fix re-initialization of loadable iptables extensions on musl (FS#31) Since musl does not implement actual dlclose() semantics, it is impossible to re-run initializers on subsequent dlopen() calls. The firewall3 executable now intercepts the extension registration calls instead in order to be able to re-call them when needed. This also allowed us to switch to libxtables' builtin extension loader as a positive side-effect. - Fix masquerade rules for multiple negated IP addresses (FS#248) When building MASQUERADE rules for zones which specify multiple negated addresses in masq_src or masq_dest, emit -j RETURN rules which jump out of the masquerading chain instead of creating multiple rules with inverted "-s" arguments. - Tag own rules using comments Instead of relying on the nonstandard xt_id match, use the xt_comment match to mark own rules. Existing comments are prefixed with "!fw3: " while uncommented rules are marked with a sole "!fw3" string. This allows removing the xt_id match entirely in a later commit. - Make missing ubus connection nonfatal Technically, firewall3 is able to operate without ubus just fine as long as the zones are declared using "option device" or "option subnet" instead of "option network" so do not abort execution if ubus could not be connected or of no network namespace is exported in ubus. This allows running firewall3 on ordinary Linux systems. - Fix conntrack requirement detection for indirectly connected zones The current code fails to apply the conntrack requirement flag recursively to zones, leading to stray NOTRACK rules which break conntrack based traffic policing. Change the implementation to iteratively reapply the conntrack fixup logic until no more zones had been changed in order to ensure that all directly and indirectly connected zones receive the conntrack requirement flag. - Add support for iptables 1.6.x Adds support for the xtables version 11 api in order to allow building against iptables 1.6.x Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iperf3: update to version 3.1.4Christian Lamparter2016-11-081-2/+2
| | | | | | | | | "This release fixes a few minor bugs, including a (non-security-impacting) buffer overflow fix ported from upstream cjson." <http://software.es.net/iperf/news.html#iperf-3-1-4-released> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* scripts/feeds: use git rev-parse for getting revisionRafał Miłecki2016-11-081-3/+3
| | | | | | It provides simpler output so we don't need extra head and cut commands. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* scripts/feeds: display "X" as revision of uninitialized feedsRafał Miłecki2016-11-081-1/+1
| | | | | | | | So far we were displaying "local" which could be misinterpreted. It wasn't possible e.g. to say if src-link feed was initialized or not. Hopefully "X" makes (a bit) more sense. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: rt2x00: add mtd-eeprom swab functionMathias Kresin2016-11-081-5/+9
| | | | | | | | Most of the lantiq devices with ralink wifi have the EEPROM stored in big endian byte order in flash, but the driver expects the EEPROM to be in little endian. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: rt2x00: remove eeprom filename dependency from mtd-eepromMathias Kresin2016-11-081-12/+15
| | | | | | | | | | | | | | | | | | | The ralink,mtd-eeprom device tree property doesn't require the ralink,eeprom property to work. Rework the error handling and user notification as well. Do not log an error if the mtd-eeprom parameter isn't used. It could be intentional and should not scare the user. Check if the number of bytes read from the mtd devices matches the requested number of bytes. In case of an mtd read error, give a hint to the user which partition was tried to read from. In case everything is fine, notify the user as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: rt2x00: improve eeprom_file property handlingMathias Kresin2016-11-082-17/+11
| | | | | | | | | | | | | | | | Call the rt2x00lib_get_eeprom_file_name only once and from the function where the EEPROM filename is required. Error only out if an EEPROM file is mandatory. Use the REQUIRE_EEPROM_FILE bit to determine if it is mandatory. Do not set the REQUIRE_EEPROM_FILE bit while requesting an EEPROM file. It should be (and is) set before requesting an EEPROM file. Do not redirect users to upstream while using a function of a custom patch. Signed-off-by: Mathias Kresin <dev@kresin.me>
* apm821xx: redo WAN green and yellow LEDsChristian Lamparter2016-11-082-1/+4
| | | | | | | | | Because the WAN port is handled by the internal AR8327N switch, the device should use swconfig_leds trigger to handle the link activity of the WAN LED. This has the added bonus that the WAN LED will now go dark if there's no ethernet cable connected to the WAN port. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq806x: fix pcie reset gpiosPavel Kubelun2016-11-082-6/+6
| | | | | | Fix perst-gpios property in accordance to the driver, so it stops spamming that it can't parse it. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ar71xx: tl-wpa8630: Fix kernel lenghtHenryk Heisig2016-11-081-1/+1
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ar71xx: wpa8630: change board name to tl-wpa8630Henryk Heisig2016-11-0813-200/+202
| | | | Signed-off-by: Henryk Heisig <hyniu@o2.pl>
* ramips: Add support for Wavlink WL-WN575A3Roger Pueyo Centelles2016-11-086-0/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the Wavlink WL-WN575A3, a dual-band wall-plug wireless router with the following specifications: - CPU: MediaTek MT7628AN 580MHz - Flash: 8MB - RAM: 64MB - Ethernet: 2x 10/100 Mbps (switched) - 2.4 GHz: 802.11b/g/n SoC, MIMO 2x2, 20 dBm - 5 GHz: 802.11a/n/ac MT7612E, MIMO 2x2, 20 dBm - Antennas: 4x external (2 per radio), non-detachable - LEDs: 4 programmable + LAN, WAN, POWER - Buttons: reset, WPS Flashing instructions: Factory U-boot launches a TFTP client if WPS button is pressed during power-on. Rename the sysupgrade file and configure a TFTP as follows: - Client (WL-WN575A3) IP: 192.168.10.101 - Server IP: 192.168.10.100 - Filename: firmware.bin Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* dnsmasq: Support add-mac optionHans Dedecker2016-11-082-1/+7
| | | | | | | | | | | | | | | | Adds the mac address of the DNS requestor to DNS queries which are forwarded upstream and can be used to do filtering by the upstream servers. This only works if the requestor is on the same subnet as the dnsmasq server The addmac parameter can hold the following values: 0 : mac address is not added 1 : mac address is added in binary format base64 : mac address is added base64 encoded text: : mac address is added in human readable format as hex and colons Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ramips: fix Newifi D1 profileBangLang Huang2016-11-081-1/+1
| | | | | | the images were generated for the wrong flash size. Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
* mdadm: move to Disc submenuAlberto Bursi2016-11-081-0/+1
| | | | | | As in Disc there is also lvm2 and other hard drive tools in the Openwrt package feeds. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* yamonenv: move to Boot Loaders submenuAlberto Bursi2016-11-081-0/+1
| | | | | | Boot Loaders submenu is the place where all other boot loaders are. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* comgt: move to WWAN submenu, fixed linkAlberto Bursi2016-11-081-3/+4
| | | | | | | | moving comgt and its modules to WWAN submenu to join uqmi as both are tools for WWAN modems. I replaced the link with comgt's ubuntu manpage because the old link isn't working anymore. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uqmi: moved to WWAN submenuAlberto Bursi2016-11-081-0/+1
| | | | | | Moving uqmi to WWAN submenu Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* build: remove stale .ipk files if package dir changesFelix Fietkau2016-11-083-6/+6
| | | | | | | | | If a package nonshared status is changed, a stale .ipk file might still be present in the old package directory. Remove the .ipk file from all package directories when building a new one (or explicitly running clean) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ca-certificates: update to version 20161102Christian Schoenebeck2016-11-081-2/+2
| | | | Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* kernel: add kernel module package for the DS1374 RTCFlorian Larysch2016-11-081-0/+18
| | | | | | | Package the driver for the DS1374 chip present on the T4240RDB. Signed-off-by: Florian Larysch <fl@n621.de> Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix missing symbol]
* kernel: package module for the W83793 hwmon chipsFlorian Larysch2016-11-081-0/+15
| | | | | | Package the driver for the W83793 hwmon chip present on the T4240RDB. Signed-off-by: Florian Larysch <fl@n621.de>
* devel/strace: fix build on mpc85xx targetAlexandru Ardelean2016-11-081-0/+14
| | | | | | | | | | | | | | | builbot faillog: https://downloads.lede-project.org/snapshots/faillogs/powerpc_8540/base/strace/compile.txt Seems that for PPC, the <linux/ptrace.h> header [from uapi] collides with musl's <sys/user.h>, for the pt_regs struct. Seems I tried to upstream this patch a while back: https://lists.openwrt.org/pipermail/openwrt-devel/2016-April/041093.html It seems to work on current LEDE trunk too. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* gcom: Fix 'mode' option for ncmCezary Jackiewicz2016-11-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Huawei devices like E3372 proper command for set lte mode is: AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Eval is required for proper quotation. Without this fix: Fri Nov 4 19:07:49 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> AT Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> ATZ Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATQ0 Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATV1 Fri Nov 4 19:07:54 2016 daemon.notice netifd: wan (2060): sending -> ATE1 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> ATS0=0 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:07:57 2016 daemon.notice netifd: wan (2060): sending -> AT^SYSCFGEX=\"03\",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Error running AT-command Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Failed to set operating mode Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2092): Stopping network ... With this fix: Fri Nov 4 19:10:59 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> AT Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> ATZ Fri Nov 4 19:11:02 2016 daemon.notice netifd: wan (2539): sending -> ATQ0 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATV1 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATE1 Fri Nov 4 19:11:04 2016 daemon.notice netifd: wan (2539): sending -> ATS0=0 Fri Nov 4 19:11:05 2016 daemon.notice netifd: wan (2539): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:11:06 2016 daemon.notice netifd: wan (2539): sending -> AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:11:07 2016 daemon.notice netifd: wan (2539): sending -> AT^NDISDUP=1,1,"internet" Fri Nov 4 19:11:08 2016 daemon.notice netifd: wan (2539): Connected, starting DHCP on wwan0 Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan' is now up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network device 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network alias 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is enabled Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' has link connectivity Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is setting up now ... Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
* bgmac: backport small DMA fixRafał Miłecki2016-11-074-4/+88
| | | | | | | | It's supposed to significantly improve performance but doesn't seem to affect Northstar unfortunately. It seems only some other platforms were limited because of this DMA setup mistake. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix bgmac regression causing BCM47186B0 SoC hangsRafał Miłecki2016-11-072-0/+65
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix kmod-sound-core build errorMathias Kresin2016-11-051-1/+1
| | | | | | Fix build error introduced with 2ab6aac. Signed-off-by: Mathias Kresin <dev@kresin.me>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:46:30 +0000