aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* realtek: Add ZyXEL GS1900-8Hauke Mehrtens2021-03-143-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ZyXEL GS1900-8 is a 8 port switch without any PoE functionality or SFP ports, but otherwise similar to the other GS1900 switches. Specifications -------------- * Device: ZyXEL GS1900-8 v1.2 * SoC: Realtek RTL8380M 500 MHz MIPS 4KEc * Flash: Macronix MX25L12835F 16 MiB * RAM: Nanya NT5TU128M8GE-AC 128 MiB DDR2 SDRAM * Ethernet: 8x 10/100/1000 Mbit * LEDs: 1 PWR LED (green, not configurable) 1 SYS LED (green, configurable) 8 ethernet port status LEDs (green, SoC controlled) * Buttons: 1 on-off glide switch at the back (not configurable) 1 reset button at the right side, behind the air-vent (not configurable) 1 reset button on front panel (configurable) * Power 12V 1A barrel connector * UART: 1 serial header (JP2) with populated standard pin connector on the left side of the PCB, towards the back. Pins are labelled: + VCC (3.3V) + TX (really RX) + RX (really TX) + GND the labelling is done from the usb2serial connector's point of view, so RX/ TX are mixed up. Serial connection parameters for both devices: 115200 8N1. Installation ------------ Instructions are identical to those for the GS1900-10HP and GS1900-8HP. * Configure your client with a static 192.168.1.x IP (e.g. 192.168.1.10). * Set up a TFTP server on your client and make it serve the initramfs image. * Connect serial, power up the switch, interrupt U-boot by hitting the space bar, and enable the network: > rtk network on * Since the GS1900-10HP is a dual-partition device, you want to keep the OEM firmware on the backup partition for the time being. OpenWrt can only boot off the first partition anyway (hardcoded in the DTS). To make sure we are manipulating the first partition, issue the following commands: > setsys bootpartition 0 > savesys * Download the image onto the device and boot from it: > tftpboot 0x84f00000 192.168.1.10:openwrt-realtek-generic-zyxel_gs1900-8-initramfs-kernel.bin > bootm * Once OpenWrt has booted, scp the sysupgrade image to /tmp and flash it: > sysupgrade /tmp/openwrt-realtek-generic-zyxel_gs1900-8-squashfs-sysupgrade.bin Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: Add generic zyxel_gs1900 image definitionHauke Mehrtens2021-03-141-13/+13
| | | | | | | Add a new common device definition for the Zyxel GS1900 line of switches. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* selinux-policy: update to version v0.8Dominick Grift2021-03-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 3d7da7a igmpproxy tidy some loose ends c84ba0f rcigmpproxy: add entries to /etc when creating /etc/igmpproxy.conf 5a18967 adds igmpproxy skeleton 7e6a218 logread: support resolving dns names e39ca8b netifd: add support for /etc/udhcpc.user 7952bd0 odhcp6c: support /etc/odhcp6c.user ba0eb4e swconfig, fwenv, agent 4556b8a pppd cosmetic 9324d9d pppd: sends AT commands to model using /dev/ttyUSBN 417b14a ttydev: add some more ttyUSB ed739dc example: dont depend on policycoreutils 97613f9 dropbear: using dropbear as scp: dns name resolving 12c193b dropbear tcp connect ssh ports for scp c050077 rcdnsmasq: remove redundant rule and make rcsysntpd optional 8c5de35 this is a bug 8d5c463 uhttpd rcboot rcdnsmasq 094266e hostapd and wpa_supplicant aef0bd7 mountroot: maintains /tmp/sysupgrade.tar 24f0406 dropbear: allow it to read tmp.fs files 2901433 firstboot mkfsf2fs rcboot 2c4afb7 blockmount mmc 465ca98 adds industrial i/o (iio) nodedev 82f686e mtd stordev: back that ubiblock0_4p1 up with a filecon 7df78bd ubus: "support" older ubusd versions that run as root 4458bce swconfig: allow using terminal (to print output) e8d606d sslcert: openssl linked: this shaves off 200 bytes 93afffb jshn ntpdhotplug 0b847f0 wpad: reads /etc/ssl/openssl.cnf f14ee34 indent fix a0c7cad mtd, uhttpd, ubus and ntpdhotplug d74f98f adds a not about checkreqprot requirement in some scenarios affacce example: add policycoreutils-setfiles for make check 4f944dc kmodloader and fwenv: efe36a3 netifd: adds a comment/reminder 581b087 more fw_printenv loose ends 30177a4 fw_setenv: needs mtd write access to set and delete env da28f4c fw_printenv: some minor clean ups a062053 fw_printenv missing rules 244ba5f blockmount: extroot and /rwm 0745a6a squid: allow squid to run sslcrtd with domain transition b851df6 squid fix 8c55acd squid: adds certfile and allow connect http but... b7c1f6d Makefile: exclude tinyproxy from mintesttgt (using squid) 5ff39bd squid: forgot about luci 5366c97 squid/rcsquid some basic fill in 8743da6 squid skeleton 687a43b adds squid 3128 port to httpproxy port Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* bmips: add experimental ethernet supportÁlvaro Fernández Rojas2021-03-1420-1/+2401
| | | | | | | | | | | | | | | | | | This adds experimental ethernet support for BCM6318, BCM6328, BCM6362, BCM6368 and BCM63268. BCM6358 needs a different driver, so there's no support for now. Working devices: - Comtrend AR-5315u - Comtrend AR-5387un - Comtrend VR-3025u - Comtrend VR-3032u Not working devices: - Netgear DGND3700 v2 (no idea on how the external switch is connected) - Huawei HG556a ver B (BCM6358 needs a separate driveer) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* tools/libelf: remove unneeded host libraryTony Ambardar2021-03-133-258/+1
| | | | | | | | | | | | | | | | | | | | This old ELF library dating to 2009 used to be necessary on MacOS but is not required for building the kernel or tools since [1]. On Linux systems, libelf is already an OpenWRT build-system prerequisite [2]. Presence of the older library can mask or conflict with the system libelf and lead to build errors, as seen compiling Linux kernels since v5.8 or host tools such as dwarves (e.g. pahole). Remove the unnecessary tools/libelf library and avoid the related issues. [1] 5f8e587240 ("build: force disable stack validation during kernel build on non-linux systems") [2] https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites Tested-by: Rosen Penev <rosenp@gmail.com> (Linux) Tested-by: Georgi Valkov <gvalkov@abv.bg> (MacOS) Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* elfutils: remove host build from target packageTony Ambardar2021-03-131-2/+0
| | | | | | | | | | | | | Commit f4da28c301 ("elfutils: Add host build") supplied a libelf host library to fix a glib2 host build error, but this need was later removed by b6212c8769 ("glib2: don't use libelf during host build"). More importantly, there are already two sources for libelf host libraries: OpenWRT build prerequisites [1] and tools/libelf. A third is not needed. Ref [1]: https://openwrt.org/docs/guide-developer/build-system/install-buildsystem#prerequisites Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* busybox: backport fixes for 1.33.0Hannu Nyman2021-03-133-1/+67
| | | | | | | | Backport two fixes for 1.33.0 * history file storing * traceroute command option parsing Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* uboot-mediatek: import fix for AHCI and enable SATADaniel Golle2021-03-132-2/+26
| | | | | | | | Import patch form Frank Wunderlich <frank-w@public-files.de> to fix build of MediaTek AHCI SATA driver. Enable that driver on Bananapi BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mvebu: LS421DE: make cosmetics changes in dts fileDaniel González Cabanelas2021-03-131-5/+11
| | | | | | | | | Make some cosmetic changes in the Buffalo LinkStation LS421DE NAS: - Delete pointless #xxx-cells - bootargs: replace earlyprintk with earlycon and remove unneeded args. - Separate pinmux nodes with empty lines. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* xfrm: simplify the check for necessary kernel supportAlin Nastac2021-03-132-2/+2
| | | | | | | [ -d /sys/module/xfrm_interface ] is enough to check if CONFIG_XFRM_INTERFACE support was enabled in kernel. Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
* vti: use alternative way to check if kernel support is enabledAlin Nastac2021-03-132-3/+3
| | | | | | | When necessary support is built in kernel, vti protocol support is not enabled in netifd. Signed-off-by: Alin Nastac <alin.nastac@technicolor.com>
* gre: use alternative way to check if kernel support is enabledAlin Nastac2021-03-132-5/+3
| | | | | | | When necessary support is built in kernel, gre protocol support is not enabled in netifd. Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* kernel: bump 5.10 to 5.10.23Kabuli Chana2021-03-1310-104/+18
| | | | | | | | | | | | update kernel to 5.10.23, rebase patches, deleted upstreamed patch: target/linux/generic/backport-5.10/830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch compile / test - mvebu / mamba, rango Signed-off-by: Kabuli Chana <newtownBuild@gmail.com> [refresh again] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.105John Audia2021-03-1317-253/+17
| | | | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Removed upstreamed generic-backports: 830-v5.12-0001-net-usb-qmi_wwan-support-ZTE-P685M-modem.patch 831-v5.9-usbip-tools-fix-build-error-for-multiple-definition.patch 755-v5.8-net-dsa-add-GRO-support-via-gro_cells.patch Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64] [squash patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: image: don't use 'M' unit as dd may not support thatDaniel Golle2021-03-131-2/+2
| | | | | | | | | dd on Mac OS X apparently fails when using 'M' unit for bs. dd: bs: illegal numeric value Use 'k' unit instead for 'pad-to' to fix that. Reported-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: fix build on Mac OS XDaniel Golle2021-03-131-0/+10
| | | | | | | Copy patch added to uboot-sunxi by commit 3cc57ba462 ("uboot-sunxi: add missing type __u64") also to uboot-mediatek. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm47xx: make WGT634U NVRAM patch apply againRafał Miłecki2021-03-121-19/+9
| | | | | Fixes: 1c48eee5b2bc ("kernel: backport Broadcom NVRAM driver cleanups") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add compatibility with upstream threaded NAPI patchFelix Fietkau2021-03-122-12/+41
| | | | | | | Enable threading if dev->threaded is set. This will be used to bring mt76 back in sync with upstream Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update 5.10 flow offload patchesFelix Fietkau2021-03-1225-473/+845
| | | | | | Includes PPPoE support and VLAN related fixes Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add pending mtd patches adding NVMEM supportRafał Miłecki2021-03-1218-17/+515
| | | | | | | | It's meant to provide upstream support for mtd & NVMEM. It's required e.g. for reading MAC address from mtd partition content. It seems to be in a final shape so it's worth testing. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: move mtd ofpart accepted patchRafał Miłecki2021-03-122-0/+0
| | | | | | Move upstream patch to the backport directory. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: add two more missed 5.10 backportsRafał Miłecki2021-03-122-0/+207
| | | | | | Those were added to 5.4 but missed while introducing 5.10 kernel. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: initialize NVRAM from NVMEM driverRafał Miłecki2021-03-122-0/+92
| | | | | | | | | | | NVRAM access may be needed early in boot process. Reading it using mtd happens quite late in the init process. Add NVRAM initialization to the NVMEM driver which comes up early and depends on IO mapping only. This is required by Linksys devices which use NVRAM content for proper partitioning (detecting current firmware partition). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport Broadcom NVRAM driver cleanupsRafał Miłecki2021-03-1210-0/+740
| | | | | | Refactoring of bcm47xx_nvram driver. It's used by bcm47xx and bcm53xx. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bmips: switch to upstream bcm2835-rng reset patchÁlvaro Fernández Rojas2021-03-123-5/+98
| | | | | | This patch has been accepted upstream. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* uboot-mediatek: update configs for MT7622 deviesDaniel Golle2021-03-122-4/+48
| | | | | | | * make sure USB 2.0 works (useful for UEFI-booting eg. memtest86) * include more useful U-Boot config options on BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* realtek: drop ethtool log noiseBjørn Mork2021-03-122-15/+15
| | | | | | | | | | | | | Demote a number of debugging printk's to pr_debug to avoid log nosie. Several of these functions are called as a result of userspace activity. This can cause a lot of log noise when userspace does periodic polling. Most of this could probably be removed completely, but let's keep it for now since these drivers are still in development. Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* uboot-mediatek: update to 2021.04-rc3 with MediaTek's patchesDaniel Golle2021-03-1139-8847/+5711
| | | | | | | | | | | | | | MediaTek published their current U-Boot patchset on github: https://github.com/mtk-openwrt/u-boot/commits/mtksoc Import the platform patches from there (`00-mtk-*.patch`), arrange, them nicely, drop no longer needed local patches and rebase on top of U-Boot 2021.04-rc3. Tested and works well on Linksys E8450 (snand-1ddr) as well as Bananapi BPi-R64 (sdmmc-2ddr, emmc-2ddr). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: update to 2021-03-10Daniel Golle2021-03-111-4/+8
| | | | | | | | Most prominently this adds changes which allow replacing the binary- only 'bromimage' tool by U-Boot's 'mkimage' (see previous commit). This fixes build on non-Linux and/or non-x86 platforms. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* tools: mkimage: add patches for 64-bit MediaTek BootROMDaniel Golle2021-03-113-17/+360
| | | | | | | Add patches for mkimage to allow using it instead of the binary-only 'bromimage' tool to generate bl2 for MT7622. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rpcd: update to git HEADDaniel Golle2021-03-111-3/+3
| | | | | | | d3f2041 uci: manually clear uci_ptr flags after uci_delete() operations ccb7517 sys: packagelist: drop ABI version from package name Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* opkg: update to git HEADDaniel Golle2021-03-111-3/+3
| | | | | | d71856a pkg: pass-through ABIVersion to status file Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* bcm53xx: backport NVMEM NVRAM driverRafał Miłecki2021-03-103-0/+181
| | | | | | | It supports NVRAM access described using DT binding. Right now NVRAM data is exposed using /sys/bus/nvmem/ only. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* Revert "bcm53xx: add support for reading NVRAM based on DT mapping"Rafał Miłecki2021-03-102-141/+0
| | | | | | | This reverts commit b0376462c164344d6be9fe1568a9f13ffd8fbb16. Those changes were rejected and were replaced with an NVMEM driver. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* glibc: update to latest 2.33 commit (BZ #27462, BZ #27318, BZ #27389)Hans Dedecker2021-03-101-2/+2
| | | | | | | | | | | | | a151f2e05a nscd: Fix double free in netgroupcache [BZ #27462] ee9f98d9ca x86: Set minimum x86-64 level marker [BZ #27318] 3e880d7337 nss: Re-enable NSS module loading after chroot [BZ #27389] 71b2463f61 x86: Add CPU-specific diagnostics to ld.so --list-diagnostics a1eb3915e7 x86: Automate generation of PREFERRED_FEATURE_INDEX_1 bitfield 33dc1dd602 ld.so: Implement the --list-diagnostics option 8d4241b897 string: Work around GCC PR 98512 in rawmemchr 6efa2d44c8 S390: Add new hwcap values. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: add a udhcpc.user placeholder scriptRui Salvaterra2021-03-102-1/+6
| | | | | | | | Document the existence of this feature. This allows the user to execute a script at each DHCPv4 event. This is useful, for example, as an ad-hoc way to update a DDNS entry when (and only when) required. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* odhcp6c: add a odhcp6c.user placeholder scriptRui Salvaterra2021-03-102-1/+8
| | | | | | | | Document the existence of this feature. This allows the user to execute a script at each DHCPv6 event. This is useful, for example, as an ad-hoc way to update a DDNS entry when (and only when) required. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* include: store ABIVersion in Packages indexPaul Spooren2021-03-081-0/+1
| | | | | | | | | | | | | | | | | | | | With the existence of ABI versions there is no clean way to determine the package name without an attached ABI version. The Packages index is stored on device to know what packages are installed. The ABIVersion was recently removed in c921650382 "build: drop ABI version from metadata", while ABI versions still exists. This becomes a problem if a user tries to export installed packages via `ubus call rpcd-sys packagelist` which would return package names including the ABI version. Trying to find these packages in a later release with changes ABI version is impossible. This commits adds the `ABIVersion` field again. Knowing both the combined (SourceName + ABIVersion) and the `ABIVersion` it is possible to calculate the package `SourceName` without storing it in the on-device package list. Signed-off-by: Paul Spooren <mail@aparcar.org>
* arm-trusted-firmware-mediatek: fix typo SPI-SNAND -> SPI-NANDDaniel Golle2021-03-081-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* checkpolicy: update to version 3.2Dominick Grift2021-03-081-3/+3
| | | | | | | 521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1 42ae834a libsepol,checkpolicy: optimize storage of filename transitions Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* secilc: update to version 3.2Dominick Grift2021-03-081-3/+3
| | | | | | | | | | | | | 49ff851c secilc: fixes cil_role_statements.md example 03881703 secilc/docs: add custom color theme 4c8d6094 secilc/docs: add syntax highlighting for secil 057d72af secilc/docs: use fenced code blocks for cil examples e8bcdb84 cil_network_labeling_statements: fixes nodecon examples eefa5511 cil_access_vector_rules: allowx, auditallowx and dontauditx fixes 9e9b8103 secilc/docs: document expandtypeattribute fbe1e526 Update the cil docs to match the current behaviour. Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* policycoreutils: update to version 3.2Dominick Grift2021-03-081-8/+8
| | | | | | | | | | | | | | d464187c policycoreutils: sestatus belongs to bin not sbin d59932a7 policycoreutils: Resolve path in restorecon_xattr 5682c0d5 policycoreutils/fixfiles.8: add missing file systems and merge check and verify 57dd1f65 policycoreutils/setfiles: Drop unused nerr variable be7f54cb setfiles: drop ABORT_ON_ERRORS and related code 9207823c setfiles: Do not abort on labeling error c064d214 selinux_config(5): add a note that runtime disable is deprecated 8bc865e1 newrole: support cross-compilation with PAM and audit ba2d6c10 fixfiles: correctly restore context of mountpoints Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libsemanage: update to version 3.2Dominick Grift2021-03-081-3/+3
| | | | | | | | | | | | c35919a7 libsemanage: sync filesystem with sandbox 5b05e829 Revert "libsemanage/genhomedircon: check usepasswd" edae9275 libsemanage: Free contents of modkey in semanage_direct_remove ce46daab libsemanage/genhomedircon: check usepasswd 6ebb35d2 libsemanage: Bump libsemanage.so version c08b73d7 libsemanage: Drop deprecated functions b46406de libsemanage: Remove legacy and duplicate symbols Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libselinux: update to version 3.2Dominick Grift2021-03-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 142826a3 libselinux: fix segfault in add_xattr_entry() 398d2cee libselinux: rename gettid() to something which never conflicts with the libc 8f0f0a28 selinux(8,5): Describe fcontext regular expressions 9cc6b5cf libselinux/getconlist: report failures 156dd0de libselinux: update getseuser e2dca5df libselinux: accept const fromcon in get_context API da4829d0 libselinux: Always close status page fd 45b15c22 selinux(8): explain that runtime disable is deprecated 3c16aaef selinux(8): mark up SELINUX values c2a58cc5 libselinux: LABEL_BACKEND_ANDROID add option to enable db0f2f38 libselinux: Add build option to disable X11 backend 4a142ac4 libsepol: Bump libsepol.so version d23342a9 libselinux: convert matchpathcon to selabel_lookup() 7ef5b185 libselinux: Change userspace AVC setenforce and policy load messages to audit format. f5d644c7 libselinux: Add additional log callback details in man page for auditing. 075f9cfe libselinux: Fix selabel_lookup() for the root dir. a4149e0e libselinux: Add new log callback levels for enforcing and policy load notices. a63f93d8 libselinux: initialize last_policyload in selinux_status_open() ef902db9 libselinux: safely access shared memory in selinux_status_updated() 9e4480b9 libselinux: Remove trailing slash on selabel_file lookups. 21fb5f20 libselinux: use full argument specifiers for security_check_context in man page e7abd802 libselinux: fix build order 05bdc031 libselinux: use kernel status page by default Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* libsepol: update to version 3.2Dominick Grift2021-03-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a9e0004f libsepol: invalidate the pointer to the policydb if policydb_init fails 6238e025 libsepol/cil: fix NULL pointer dereference in cil_fill_ipaddr b69d77bc libsepol/cil: handle SID without assigned context when writing policy.conf 0861c659 libsepol: Validate policydb values when reading binary policy 8f5409cf libsepol: Create function ebitmap_highest_set_bit() 0451adeb libsepol/cil: Destroy disabled optional blocks after pass is complete 32f8ed3d libsepol/cil: introduce intermediate cast to silence -Wvoid-pointer-to-enum-cast 4662bdc1 libsepol/cil: be more robust when encountering <src_info> 6b561058 libsepol/cil: fix NULL pointer dereference with empty macro argument 0d0e47c7 libsepol/cil: Fix integer overflow in the handling of hll line marks 1b36ace2 libsepol: include header files in source files when matching declarations 1f1fa9d4 libsepol: uniformize prototypes of sepol_mls_contains and sepol_mls_check 72a88d75 libsepol: remove unused files eba0ffee libsepol/cil: Fix heap-use-after-free when using optional blockinherit 1048f8d3 libsepol/cil: unlink blockinherit->block link when destroying a block b3202918 libsepol/cil: fix memory leak when a constraint expression is too deep f0d98f83 libsepol/cil: Fix heap-use-after-free in __class_reset_perm_values() 5d021d66 libsepol/cil: Update symtab nprim field when adding or removing datums 34bd9a9d libsepol: destroy filename_trans list properly bdf4e332 libsepol/cil: fix NULL pointer dereference when parsing an improper integer b7ea65f5 libsepol/cil: destroy perm_datums when __cil_resolve_perms fails 228c06d9 libsepol/cil: fix out-of-bound read in cil_print_recursive_blockinherit a25d9104 libsepol/cil: constify some strings e2d01842 libsepol/cil: propagate failure of cil_fill_list() 6c8fca10 libsepol/cil: do not add a stack variable to a list 38a09b74 libsepol/cil: fix NULL pointer dereference when using an unused alias 3c357285 libsepol/cil: remove useless print statement 90809674 libsepol/cil: always destroy the lexer state d16a1e46 libsepol/cil: Use the macro FLAVOR() whenever possible 2aac859a libsepol/cil: Use the macro NODE() whenever possible d317b470 libsepol/cil: Remove unnecessary assignment in cil_resolve_name_keep_aliases() 9b9761cf libsepol/cil: Remove unused field from struct cil_args_resolve e257d4c7 libsepol/cil: Get rid of unnecessary check in cil_gen_node() ebba2b00 libsepol/cil: cil_tree_walk() helpers should use CIL_TREE_SKIP_* 89dab467 libsepol: free memory when realloc() fails 2d353bd5 libsepol/cil: Give error for more than one true or false block 4a142ac4 libsepol: Bump libsepol.so version 506c7b95 libsepol: Drop deprecated functions ae58e84b libsepol: Get rid of the old and duplicated symbols c97d63c6 libsepol: silence potential NULL pointer dereference warning 64387cb3 libsepol: drop confusing BUG_ON macro 521e6a2f libsepol/cil: fix signed overflow caused by using (1 << 31) - 1 a152653b libsepol/cil: Fix neverallow checking involving classmaps 734e4beb libsepol/cil: Validate conditional expressions before adding to binary policy 685f577a libsepol/cil: Validate constraint expressions before adding to binary policy 8206b8cb libsepol: implement POLICYDB_VERSION_COMP_FTRANS 42ae834a libsepol,checkpolicy: optimize storage of filename transitions Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
* bmips: automatically detect RAM sizeÁlvaro Fernández Rojas2021-03-087-30/+196
| | | | | | | | | Introduce new patch for automatically detecting RAM size. Some boards have a different amount of RAM depending on the HW revision. Therefore, automatically detecting the RAM size instead of hard-coding it will reduce the number of device definitions. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: improve CPU frequency patchÁlvaro Fernández Rojas2021-03-081-10/+9
| | | | | | Fixes BCM6358 address and calculations. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bcm63xx: AD1018-nor: add NAND flashDaniel González Cabanelas2021-03-081-0/+24
| | | | | | | | | The Sercomm AD1018 has a NAND flash. We recently added support for NANDs in this target. Use the internal NAND as additional storage. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* gitignore: add .vscode for VS Code usersÁlvaro Fernández Rojas2021-03-081-0/+1
| | | | | | For Visual Studio Code users, .vscode is created inside the workspace. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* bmips: dts: comestic changesÁlvaro Fernández Rojas2021-03-088-22/+18
| | | | | | Improve and refactor device tree files. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-15 23:00:33 +0000