aboutsummaryrefslogtreecommitdiffstats
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* trusted-firmware-a.mk: pass package version as version identifierAndre Heider2021-01-301-0/+1
| | | | | | | Upon boot it now prints: NOTICE: BL1: v2.4(release):OpenWRT v2.4-1 (espressobin-v3-v5-1gb-2cs) (Marvell-devel-18.12.0) Signed-off-by: Andre Heider <a.heider@gmail.com>
* ramips: add support for ELECOM WRC-2533GHBK-IINAGAKI Hiroshi2021-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ELECOM WRC-2533GHBK-I is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, RX, GND, TX from SoC side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-2533GHBK-I normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~150 seconds to complete flashing MAC addresses: LAN : BC:5C:4C:xx:xx:89 (Config, ethaddr (text)) WAN : BC:5C:4C:xx:xx:88 (Config, wanaddr (text)) 2.4GHz : BC:5C:4C:xx:xx:8A (Factory, 0x4 (hex)) 5GHz : BC:5C:4C:xx:xx:8B (Factory, 0x8004 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* build: add elecom-product-header for ELECOM devicesINAGAKI Hiroshi2021-01-291-0/+12
| | | | | | | | | A header used in ELECOM WRC-300GHBK2-I and WRC-1750GHBK2-I/C is also used in ELECOM WRC-2533GHBK-I, so split the code to generate the header and move it to image-commands.mk to use from ramips target. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Reviewed-by: Sungbo Eo <mans0n@gorani.run>
* base-files: remove execute bit and shebang from functions.shAdrian Schmutzler2021-01-291-2/+2
| | | | | | | | | | | /lib/functions.sh was executable for no obvious reason and its execute property was even checked in package-ipkg.mk just to source it afterwards. Remove the execute bit and shebang as this is clearly a library. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: bump 5.4 to 5.4.93John Audia2021-01-291-2/+2
| | | | | | | | | | | | | | | | | All modification made by update_kernel.sh in a fresh clone without existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 Compile-tested [*]: ath79/{tiny,generic}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64 Run-tested [*]: ath79/generic, ipq40xx, octeon, ramips/mt7621 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
* kernel: bump 5.4 to 5.4.92John Audia2021-01-261-2/+2
| | | | | | | | | | | | | | | | | All modification made by update_kernel.sh in a fresh clone without existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 Compile-tested [*]: ath79/{tiny,generic}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64. Run-tested [*]: ath79/generic, octeon, ramips/mt7621, realtek. No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
* treewide: provide global default for SUPPORTED_DEVICESAdrian Schmutzler2021-01-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The majority of our targets provide a default value for the variable SUPPORTED_DEVICES, which is used in images to check against the compatible on a running device: SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) At the moment, this is implemented in the Device/Default block of the individual targets or even subtargets. However, since we standardized device names and compatible in the recent past, almost all targets are following the same scheme now: device/image name: vendor_model compatible: vendor,model The equal redundant definitions are a symptom of this process. Consequently, this patch moves the definition to image.mk making it a global default. For the few targets not using the scheme above, SUPPORTED_DEVICES will be defined to a different value in Device/Default anyway, overwriting the default. In other words: This change is supposed to be cosmetic. This can be used as a global measure to get the current compatible with: $(firstword $(SUPPORTED_DEVICES)) (Though this is not precisely an achievement of this commit.) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.4 to 5.4.91John Audia2021-01-201-2/+2
| | | | | | | | | | | | | | All modification made by update_kernel.sh in a fresh clone without existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64]
* kernel: bump 5.4 to 5.4.90John Audia2021-01-191-2/+2
| | | | | | | | | | | | | | All modification made by update_kernel.sh in a fresh clone without existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64]
* include: update logo with better kerningPaul Spooren2021-01-182-453/+241
| | | | | | | | Kerning seems to be very off-putting for some people so the logo designer thankfully updated guidelines to something which is now considered final. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: bump 5.4 to 5.4.89John Audia2021-01-151-2/+2
| | | | | | | | | | | | | | All modification made by update_kernel.sh in a fresh clone without existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86/64]
* build/image: warn if missing qemu-img for VDI/VMDKPaul Spooren2021-01-101-2/+6
| | | | | | | | | | | | | | | Currently `qemu-img` is used to convert raw x86 images to VDI and VMDK images, used for virtual machines. Having `qemu-img` in tree requires us to maintain an ancient version of `qemu-utils`, which recently required extra work to compile with newer compiler version. This commit prints a warning message in case `qemu-img` is missing. As a next step the in-tree version of `qemu-img` can be removed. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel-defaults: Manage the enabling/disabling of ZSTDFlorian Fainelli2021-01-091-0/+1
| | | | | | | | Linux 5.9 introduces support for ZSTD ramdisk and initrd compression, make sure we enable/disable the relevant options when building an initramfs enabled kernel. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* kernel-defaults: Delete external source tree user_headersFlorian Fainelli2021-01-091-0/+1
| | | | | | | | | | When we use an external kernel tree which may not have been fully cleaned, there may be user_headers left which do not match the target architecture, leading to build failures for packages that do an explicit inclusion of user_headers (such as iproute2 or iptables). Make sure we delete them while preparing the directory. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* kernel: bump 5.4 to 5.4.87John Audia2021-01-081-2/+2
| | | | | | | | | | | | | | | | | | All modification by update_kernel.sh. Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Compile-tested [*]: ath79/{generic,tiny}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64. Run-tested [*]: ramips/mt7621 (DIR-878 A1, R6800, RT-AC57U), octeon (EdgeRouter Lite). Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
* build: use ccache -C for cleaning the cacheSven Wegener2021-01-061-2/+2
| | | | | | | | | | This keeps the configuration, like the size of the cache, and the statistics intact. Move the removal of the cache directory to the distclean target, but only delete the .ccache directory inside of our build tree, as we should not mess with a user-configured external ccache directory this destructively. Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
* build: drop clang wrapperKevin Darbyshire-Bryant2021-01-051-9/+1
| | | | | | | clang's gcc emulation does the right thing with -print-file-name now, drop the wrapper Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* build: replace which with Bash command built-inPetr Štetiar2021-01-042-3/+3
| | | | | | | | | | | | | | | | | | | | | | | `which` utility is not shipped by default for example on recent Arch Linux and then any steps relying on its presence fails, like for example following Python3 prereq build check: $ python3 --version Python 3.9.1 $ make /bin/sh: line 1: which: command not found /bin/sh: line 1: which: command not found /bin/sh: line 1: which: command not found ... Checking 'python3'... failed. ... Fix this by switching to Bash builtin `command` which should provide same functionality. Fixes: FS#3525 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: drop ccache variables from specific targetsSven Wegener2021-01-012-6/+0
| | | | | | | With commit 2ca084cc ("build: improve ccache support") these variables are being set globally and we don't need them for specific targets. Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
* kernel-build: fix STRIP_KERNEL_EXPORTS for 64-bit kernelsRui Salvaterra2021-01-011-1/+1
| | | | | | | | | | | While parsing the nm output, we need to account for the fact that 64-bit kernels have 64-bit wide addresses. While at it, replace the grep | sed combo with a single awk invocation and a stronger regex. Fixes: 2ef0acc5fcda557fa5aaad35d27cb8cf75be96d2 "kernel-build: fix STRIP_KERNEL_EXPORTS for recent kernels" Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.86Adrian Schmutzler2021-01-011-2/+2
| | | | | | | | | | | | | | | | | Removed upstreamed patches: pending-5.4/499-mtd-parser-cmdline-Fix-parsing-of-part-names-with-co.patch Manually merged: pending-5.4/611-netfilter_match_bypass_default_table.patch layerscape/302-dts-0112-arm64-dts-fsl-ls1028a-prepare-dts-for-overlay.patch Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/{generic,tiny}, ipq40xx, octeon, ramips/mt7621, realtek, x86/64 Run-tested: ipq806x/R7800, realtek Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org>
* build/prereq: merge ifndef IB block togetherPaul Spooren2020-12-311-5/+1
| | | | | | | | | Multiple prereq checks are only required within the build system but not for the ImageBuilder. These checks are excluded by using ifndef IB. This commit merges the three ifndef IB blocks together. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: bump 5.4 to 5.4.85John Audia2020-12-221-2/+2
| | | | | | | | | | | | | All modifications made by update_kernel.sh run in a fresh clone without any existing toolchains. Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* include/cmake.mk: Fix the bug in ccache supportHirokazu MORIKAWA2020-12-211-18/+14
| | | | | | | | | | Fix the bug in ccache support due to this change. https://github.com/openwrt/openwrt/commit/bfc433efd4a0c6875a92981d1bd2a5e3e60c61c6 The new cmake uses this for the wrapper. https://cmake.org/cmake/help/v3.19/prop_tgt/LANG_COMPILER_LAUNCHER.html Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>
* kernel: bump 5.4 to 5.4.83John Audia2020-12-151-2/+2
| | | | | | | | | | | | | | | | | | | Manually merged: layerscape/808-i2c-0011-i2c-imx-support-slave-mode-for-imx-I2C-driver.patch layerscape/808-i2c-0012-i2c-imx-correct-code-of-errata-A-010650-for-layersca.patch Remaining modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, x86/64 [*], ramips/mt7621 [*], ath79/tiny [*], ipq40xx [*], octeon [*], realtek [*] Run-tested: ipq806x/R7800, ramips/mt7621 [*], octeon [*], realtek [*] No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Stijn Segers <foss@volatilesystems.org> [*]
* build/json: add filesystem informationPaul Spooren2020-12-131-0/+1
| | | | | | | | Some images are created using different filesystems, most popular squashfs and ext4. To allow downstream projects to distinguesh between those, add the `filesystem` information to created json files. Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: bump 5.4 to 5.4.82John Audia2020-12-091-2/+2
| | | | | | | | | | | | | | | | Removed since included upstream and could be reverse-applied by quilt: backport-5.4/315-v5.10-usbnet-ipeth-fix-connectivity-with-ios-14.patch Remaining modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [build/run x86_64]
* build: find_md5 list with mod time and sortedJohn Beckett2020-12-071-1/+1
| | | | | | | | | | | | | | | | | | | | It was observed that the MD5 would not change after source files had been modified, looking deeper into the build process it was discovered that find_md5 build function makes a list of the files being built and then passes the list to a summing utility on stdin. The resultant MD5 is of the file list, not the contents of the files. The MD5 would change if the ordering of the list changed, or items were removed or deleted. The proposed fix is to add the modification time after the filename and then sort the list to prevent find returning files in a different order falsely re-triggering a rebuild. The MD5 will now change when a file is modified or files are added/removed from the list. Using 'T@' to show time in epoch for timezone independent behaviour. Signed-off-by: John Beckett <john.beckett@net2edge.com>
* libcxx[abi]: removeRosen Penev2020-12-071-10/+2
| | | | | | | | | | | | This is a neat project, but offers no benefit to OpenWrt. The initial reason for it was to be a replacement for libstdcpp as it is smaller and lacks compatibility for C++98. Unfortunately, compiling several packages with it results in larger ipk sizes. While not a member of the packages feed, this will be moved to packages-abandoned to keep it somewhere. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* build: require rsyncStijn Tintel2020-12-071-0/+3
| | | | | | It seems to be required to build toolchain/kernel-headers. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* build: reduce cleanup binary calls in rootfs.mkPaul Spooren2020-12-051-11/+9
| | | | | | Both `find` and `rm` only need to be called once for folders and files. Signed-off-by: Paul Spooren <mail@aparcar.org>
* build: make testing kernel decompression more portableFelix Fietkau2020-12-051-1/+1
| | | | | | | On non-GNU systems, zcat often does not handle gzip decompression. Use gzip -dc like the regular unpack command Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 5.4 to 5.4.81John Audia2020-12-041-2/+2
| | | | | | | | | | | | | | All modifications made by update_kernel.sh/no human intervention needed Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [another refresh] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: Extract trusted-firmware-a.mkHauke Mehrtens2020-12-021-0/+93
| | | | | | | | | | | | | | | | | | The include/trusted-firmware-a.mk file is based on the include/u-boot.mk file and should be used to build a Trusted Firmware-A (TFA) which was previously named Arm trusted firmware. This is useful for targets where the TFA is board specific like for Marvell SoCs and probably also NXP Layerscape SoCs. This also makes use of this abstraction in the arm-trusted-firmware-mvebu package to build board specific ATF binaries. The ATF binaries will be automatically activated and build when the board is selected in the normal build or all boards are selected. This should also activate the build when build bot creates images. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* README: mv logo.svg include/logo.{png,svg}Paul Spooren2020-12-012-0/+610
| | | | | | | | | | | | Some Git hoster (e.g. sr.ht) disable hosting of svg images (xml) to avoid XSS attacks. To show the logo correctly on all code hosters use a "safe" PNG image. Also move logo(s) to include/ folder to lower autocomplete churn with the `logs/` folder. While at it, replace absolute logo path and make it relative, as this may break other code hosters as well. Signed-off-by: Paul Spooren <mail@aparcar.org>
* cmake.mk,rules.mk: fix host builds using CMake and ccachePetr Štetiar2020-11-281-2/+16
| | | | | | | | | | | | | | Commit f98878e4c17d ("cmake.mk: set C/CXX compiler for host builds as well") has introduced regression as it didn't taken usage of ccache into the account so fix it by handling ccache use cases as well. In order to get this working we need to export HOSTCXX_NOCACHE in rules.mk as well. Fixes: f98878e4c17d ("cmake.mk: set C/CXX compiler for host builds as well") Reported-by: Ansuel Smith <ansuelsmth@gmail.com> Tested-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* include/subdir: on build failure always print errorKarel Kočí2020-11-271-3/+3
| | | | | | | | | | | It is impossible to locate package that failed the build just from log once more build is run in parallel (that is more than one make job). The only way is to scout log files for failed package going back trough log. This change makes it so error is printed for package that failed every time. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* cmake.mk: set C/CXX compiler for host builds as wellRosen Penev2020-11-271-0/+2
| | | | | | | Without this, cmake will use whatever CC/CXX is set to, which could be clang. In that case, at least libjson-c/host will fail to compile. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* download: handle possibly invalid local tarballsPetr Štetiar2020-11-272-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently it's assumed, that already downloaded tarballs are always fine, so no checksum checking is performed and the tarball is used even if it might be corrupted. From now on, we're going to always check the downloaded tarballs before considering them valid. Steps to reproduce: 1. Remove cached tarball rm dl/libubox-2020-08-06-9e52171d.tar.xz 2. Download valid tarball again make package/libubox/download 3. Invalidate the tarball sed -i 's/PKG_MIRROR_HASH:=../PKG_MIRROR_HASH:=ff/' package/libs/libubox/Makefile 4. Now compile with corrupt tarball source make package/libubox/{clean,compile} Signed-off-by: Petr Štetiar <ynezz@true.cz>
* build: use mkhash for IPK metadata checksumsPaul Spooren2020-11-261-2/+2
| | | | | | | | | | | | | | | | | | | | When setting the option IPK_FILES_CHECKSUMS the build system stores checksums of all package file as metadata. In combination with pkg_check this allows to see if a package is broken, e.g. caused by bad flash. To create those checksums the tool `sha256sum` were used while the rest of OpenWrt uses `mkhash`, a small & fast implementation of sha256. As the build system does not check the existence of `sha256sum` and the stderr output is moved to /dev/null, a situation where the option is enabled but no actual checksum are created may occur. Instead of adding `sha256sum` as a requirement, this replaces it with `mkhash sha256` and adapts the `sed` pipe command to fit spacing. CC: Xu Wang <xwang1498@gmx.com> CC: Michal Hrusecky <Michal@Hrusecky.net> Signed-off-by: Paul Spooren <mail@aparcar.org>
* kernel: bump 5.4 to 5.4.80John Audia2020-11-261-2/+2
| | | | | | | | | | | | | | | | | Removed since could be reverse-applied by quilt and found to be included upstream: backport-5.4/789-net-usb-qmi_wwan-Set-DTR-quirk-for-MR400.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, bcm27xx/bcm2711, ath79/generic Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Tested-by: Curtis Deptuck <curtdept@me.com> [x86_64 build/run]
* build: add UIMAGE_MAGIC to device variablesSander Vanheule2020-11-252-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | Allow a device recipe to specify a custom UIMAGE_MAGIC value, as used by OpenWrt's -M flag for mkimage. This allows to automatically customize the magic bytes in all calls to Build/uImage for this device, similar to the behaviour of UIMAGE_NAME. Since the -M argument is inserted before the user arguments, it can be overriden. The following example would use 0x87654321 for the KERNEL image, but 0x12345678 for the KERNEL_INITRAMFS image: define Device/MyDevice UIMAGE_MAGIC := 0x87654321 KERNEL := ... | uImage lzma KERNEL_INITRAMFS := ... | uImage lzma -M 0x12345678 ... endef Fixes: df8e6be59a1f ("rtl838x: add new architecture") [UIMAGE_MAGIC was not declared as a device variable] Signed-off-by: Sander Vanheule <sander@svanheule.net> [rebase, improve formatting of "Fixes"] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: uImage: separate arguments into individual linesAdrian Schmutzler2020-11-251-4/+9
| | | | | | Having one line per argument increases overview dramatically. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: uImage: allow override of default argumentsSander Vanheule2020-11-251-2/+3
| | | | | | | | | | | | | For some build recipes, the argument to Build/uImage is used to sneak in extra arguments for mkimage, whereas this appears to have been intended to specificy the compression method only. Use the first provided word for -C to be backwards compatible with current calls to Build/uImage. Use the rest of the call arguments to override the provided defaults. Only the input file name (-d) and the output file name cannot overriden. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* prereq-build: add python 3.9 supportRosen Penev2020-11-241-0/+2
| | | | | | Fixes unmet dependency issue. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: bump 5.4 to 5.4.79John Audia2020-11-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | Manually rebased patches: ath79/patches-5.4/910-unaligned_access_hacks.patch bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch bcm27xx/patches-5.4/950-0414-SQUASH-Fix-spi-driver-compiler-warnings.patch ipq806x/patches-5.4/093-4-v5.8-ipq806x-PCI-qcom-Use-bulk-clk-api-and-assert-on-error.patch Removed since could be reverse-applied by quilt and found to be included upstream: ipq806x/patches-5.4/096-PCI-qcom-Make-sure-PCIe-is-reset-before-init-for-rev.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [refresh altered targets after rebase] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: create $(PKG_SYMVERS_DIR) if non-existentSebastian Kemper2020-11-192-1/+1
| | | | | | | | | | | | | Commit 5d76065 moved the creation of the symvers directory to include/kernel-build.mk. This is fine when building from scratch. But when unpacking an SDK the directory doesn't exist and because the kernel won't be built (again) this directory will not be created by the build system, causing build failure if make tries to copy files into it. This moves the creation of the symvers directory back into include/kernel.mk so that the directory is created in any case. Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
* kernel: bump 5.4 to 5.4.77John Audia2020-11-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Manually rebased patches: bcm27xx/patches-5.4/950-0135-spi-spi-bcm2835-Disable-forced-software-CS.patch generic-backport/744-v5.5-net-sfp-soft-status-and-control-support.patch layerscape/patches-5.4/819-uart-0005-tty-serial-fsl_lpuart-enable-dma-mode-for-imx8qxp.patch mvebu/patches-5.4/521-arm64-dts-marvell-espressobin-Add-ethernet-switch-al.patch Removed: layerscape/patches-5.4/819-uart-0012-tty-serial-lpuart-add-LS1028A-support.patch All modifications made by update_kernel.sh Build system: x86_64 Build-tested: ipq806x/R7800, ath79/generic, bcm27xx/bcm2711, lantiq/Easybox 904 xDSL, x86_64 Run-tested: ipq806x/R7800, lantiq/Easybox 904 xDSL, x86_64 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> Co-developed-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* build: support cmake verbose for host buildsFelix Fietkau2020-11-141-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: detect broken make version on macOSFelix Fietkau2020-11-141-0/+6
| | | | | | | | | Apple ships a broken make version with the Xcode command line tools. Homebrew installs make as gmake by default in order to not collide with Apple's version. Exit with an error if the broken one is used accidentally Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-30 03:21:24 +0000