aboutsummaryrefslogtreecommitdiffstats
path: root/package/base-files/files/etc
Commit message (Collapse)AuthorAgeFilesLines
...
* base-files: remove /etc/uci-defaults/11_migrate-sysctlMatthias Schiffer2018-04-131-16/+0
| | | | | | | 11_migrate-sysctl has not been updated with new file hashes since 2012. Let's get rid of it. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: tune fragment queue thresholds for available system memoryMatthias Schiffer2018-03-071-9/+20
| | | | | | | | | The default fragment low/high thresholds are 3 and 4 MB. On devices with only 32MB RAM, these settings may lead to OOM when many fragments that cannot be reassembled are received. Decrease fragment low/high thresholds to 384 and 512 kB on devices with less than 64 MB RAM. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: fix off-by-one in counting seconds for factory resetRafał Miłecki2018-03-011-1/+1
| | | | | | | | | There was a mismatch between indicating factory reset and code actually starting it. After 5 seconds status LED started blinking rapidly letting user know it's ready to release reset button. In practice button had to stay pressed for another second in order to relly start the process. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* base-files: gpio switch: check if direction can be setMathias Kresin2018-01-181-2/+9
| | | | | | | | | | | | Obviously not all GPIO controller allow to change the direction. The issue is around since the beginning of the script but only due to the recent changes error messages are more visible. Add a check if a change of the direction is supported by the GPIO controller and fallback to setting only the value if not. Fixes: FS#1271 Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: gpio switch: fix inverted logicMathias Kresin2018-01-181-1/+1
| | | | | | | | | GPIOs are exported as active high to the sysfs, hence the logic need to be inverted. Fixes: e66c47fb14f5 ("base-files: gpio switch: set output value with direction") Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: gpio switch: set output value with directionMathias Kresin2018-01-091-3/+2
| | | | | | | | | | | | Use the "low" and "high" values to configure the GPIO as an output with that initial value. It ensures that the gpio doesn't have a unwanted value during the time the direction is set to ouput and the actual value is applied. We don't need to take care of the GPIO polarity for now, since our exported GPIOs are always active low. Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: gpio_switch: start before boot state done is setMathias Kresin2018-01-091-1/+1
| | | | | | | Start gpio_switch before the boot state is set to up/initialised/done. This way the exported GPIOs are available at the time rc.local is started. Signed-off-by: Mathias Kresin <dev@kresin.me>
* base-files: protect stop and reload actions with procd_lockRoman Yeryomin2018-01-021-0/+2
| | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Andrejs Hanins <ahanins@gmail.com>
* base-files: rc.common: fix enable() return code and logicRoman Yeryomin2018-01-021-7/+8
| | | | | | | | | | | | | | | In current state, if there is START but no STOP, enbale() will return 1 (failure), which is wrong. Moreover there is no need to check for START/STOP twice. Instead, add err variable to save success state and and return it's value. Also eliminate the need to disable() by using 'ln -sf', which will first delete the old symlink if one exists. Changes from v1: - fixed description Signed-off-by: Roman Yeryomin <roman@advem.lv>
* base-files: fix logic when to show failsafe bannerMatthias Schiffer2017-12-291-1/+1
| | | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Fixes: 8170f280c4 ("base-files: set FAILSAFE in /etc/profile when /tmp/.failsafe exists")
* base-files: set FAILSAFE in /etc/profile when /tmp/.failsafe existsMatthias Schiffer2017-12-291-1/+4
| | | | | | | Since dropbear clears the environment, FAILSAFE was not set as intended in failsafe mode. This also broke sysupgrade from failsafe mode over SSH. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* merge: properly remove %n / %N referencesJo-Philipp Wich2017-12-091-2/+1
| | | | | | | | | | - use %d instead of %n for opkg feed identifiers - remove %n / %N references from version files Fixes bf5cef47b3 merge: release/banner: drop release name and update banner. Fixes FS#1213. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* merge: release/banner: drop release name and update bannerZoltan HERPAI2017-12-081-10/+8
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* merge: base: update base-files and basic configZoltan HERPAI2017-12-081-1/+1
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* procd: service_data: Support data within the service itselfPierre Lebleu2017-11-101-0/+4
| | | | | | Use the same approach than the service_triggers for the service_data. Signed-off-by: Pierre Lebleu <pme.lebleu@gmail.com>
* base-files: add interval option to netdev LED trigger configurationEdmunt Pienkowsky2017-11-031-0/+1
| | | | | | Add an uci option to set the interval parameter of the netdev trigger. Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
* basefiles: allow suid coredumpsKevin Darbyshire-Bryant2017-09-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set sysctl fs.suid_dumpable = 2 This allows suid processes to dump core according to kernel.core_pattern setting. LEDE typically uses suid to drop root priviledge rather than gain it but without this setting any suid process would be unable to produce coredumps (e.g. dnsmasq) Processes still need to set a non zero core file process limit ('ulimit -c unlimited' or if procd used 'procd_set_param limits core="unlimited"') in order to produce a core. This setting removes an obscure stumbling block along the way. >From https://www.kernel.org/doc/Documentation/sysctl/fs.txt suid_dumpable: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped. 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. This is insecure as it allows regular users to examine the memory contents of privileged processes. 2 - (suidsafe) - any binary which normally would not be dumped is dumped anyway, but only if the "core_pattern" kernel sysctl is set to either a pipe handler or a fully qualified path. (For more details on this limitation, see CVE-2006-2451.) This mode is appropriate when administrators are attempting to debug problems in a normal environment, and either have a core dump pipe handler that knows to treat privileged core dumps with care, or specific directory defined for catching core dumps. If a core dump happens without a pipe handler or fully qualifid path, a message will be emitted to syslog warning about the lack of a correct setting. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* base-files: add "tty" user groupJo-Philipp Wich2017-06-261-0/+1
| | | | | | | | This is needed for an upcoming change to the hotplug default rules which will cause /dev/tty* nodes to get assigned to the "tty" group in order to support unprivileged user access when needed. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: fix default procd reloadAlexandru Ardelean2017-05-201-1/+1
| | | | | | | | | | | | | | | | | | Bug introduced with 6713694. I did not count on procd handling reload as mentioned in this doc: https://wiki.openwrt.org/inbox/procd-init-scripts ``` procd_set_param file /var/etc/your_service.conf # /etc/init.d/your_service reload will restart the daemon if these files have changed procd_set_param netdev dev # likewise, except if dev's ifindex changes. procd_set_param data name=value ... # likewise, except if this data changes. ``` The service would be restarted regardless of any of those params. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* base-files: use restart if no reload hook for serviceAlexandru Ardelean2017-04-121-4/+3
| | | | | | | | | | | | | | | | | | | | | | | This was also working before, with a slightly different semantic. [ Original semantic ] If no reload hooks was implemented, the default one would kick in, it would return fail, and restart would happen. This would happen also in the case where a reload hook would be implemented, it would fail, and it would restart the service. [ New semantic ] The default reload hook calls restart. Services can implement their own reload. If reload fails, then the '/etc/init.d/<service> reload' would return a non-zero code, and the caller can choose a way to handle this. Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
* base-files: add submission service portLucian Cristian2017-03-111-0/+2
| | | | | | prevent postfix start failure fatal: 0.0.0.0:submission: Unrecognized service Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* base-files: fix user creation on sysupgrade with few opkg control filesMatthias Schiffer2017-01-241-1/+1
| | | | | | | | | | | If only a single opkg control file exists (which can happen with CONFIG_CLEAN_IPKG), grep would not print the file name by default. Instead of forcing it using -H, we just switch to -l (print only file names) and get rid of the cut. Add -s to suppress an error message when no control files exist. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: add /etc/iproute2/rt_protosHans Dedecker2017-01-181-0/+18
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* base-files: add ARCH_PACKAGES to openwrt_release and os-releaseMatthias Schiffer2017-01-161-0/+1
| | | | | | | | | Knowing the package architecture at runtime can be useful, e.g. to configure opkg repository URLs. The value of ARCH_PACKAGES ("%A" in VERSION_SED) as added to openwrt_release (as DISTRIB_ARCH) and os-release (as LEDE_ARCH). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* base-files: fix message of initscript wrapperAlberto Bursi2017-01-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | currently (after blogic's edit to my commit) it prints like this: root@lede:/# service aa aa does not exist. the following services are available :adblock dnsmasq gpio_switch rpcd system boot done led sqm uhttpd crelay dropbear log sysctl umount cron firewall network sysfixtime urandom_seed ddns fstab odhcpd sysntpd which looks pretty bad, and is even worse if someone writes only "service" without arguments, as it will print " does not exist. " which is confusing. with this commit it looks like this: root@lede:/# service service "" not found, the following services are available: adblock dnsmasq gpio_switch rpcd system boot done led sqm uhttpd crelay dropbear log sysctl umount cron firewall network sysfixtime urandom_seed ddns fstab odhcpd sysntpd Yes there is some play with " and ', it is to display "name" or just "" if no service name is entered (like in the example). Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* build: adjust version number handlingJo-Philipp Wich2016-12-023-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the revision info to the VERSION_CODE variable and default VERSION_NUMBER to CURRENT for master branch builds. Also introduce a new menuconfig option CONFIG_VERSION_CODE which allows users to override the revision value put into VERSION_CODE and adjust the template files used by the base-files package to accomodate for the changed semantics. While we're at it, also adjust the various URLs to match the current web site. After this commit, the relevent files will look like the examples given below: # cat /etc/openwrt_version r2398+1 # cat /etc/openwrt_release DISTRIB_ID='LEDE' DISTRIB_RELEASE='CURRENT' DISTRIB_REVISION='r2398+1' DISTRIB_CODENAME='reboot' DISTRIB_TARGET='x86/64' DISTRIB_DESCRIPTION='LEDE Reboot CURRENT r2398+1' DISTRIB_TAINTS='no-all override' # cat /usr/lib/os-release NAME="LEDE" VERSION="CURRENT, Reboot" ID="lede" ID_LIKE="lede openwrt" PRETTY_NAME="LEDE Reboot CURRENT" VERSION_ID="current" HOME_URL="http://lede-project.org/" BUG_URL="http://bugs.lede-project.org/" SUPPORT_URL="http://forum.lede-project.org/" BUILD_ID="r2398+1" LEDE_BOARD="x86/64" LEDE_TAINTS="no-all override" LEDE_DEVICE_MANUFACTURER="LEDE" LEDE_DEVICE_MANUFACTURER_URL="http://lede-project.org/" LEDE_DEVICE_PRODUCT="Generic" LEDE_DEVICE_REVISION="v0" LEDE_RELEASE="LEDE Reboot CURRENT r2398+1" On a release branch, those files would look like: # cat /etc/openwrt_version r2399 # cat /etc/openwrt_release DISTRIB_ID='LEDE' DISTRIB_RELEASE='16.12-CURRENT' DISTRIB_REVISION='r2399' DISTRIB_CODENAME='test_release' DISTRIB_TARGET='x86/64' DISTRIB_DESCRIPTION='LEDE Test Release 16.12-CURRENT r2399' DISTRIB_TAINTS='no-all override' # cat /usr/lib/os-release NAME="LEDE" VERSION="16.12-CURRENT, Test Release" ID="lede" ID_LIKE="lede openwrt" PRETTY_NAME="LEDE Test Release 16.12-CURRENT" VERSION_ID="16.12-current" HOME_URL="http://lede-project.org/" BUG_URL="http://bugs.lede-project.org/" SUPPORT_URL="http://forum.lede-project.org/" BUILD_ID="r2399" LEDE_BOARD="x86/64" LEDE_TAINTS="no-all override" LEDE_DEVICE_MANUFACTURER="LEDE" LEDE_DEVICE_MANUFACTURER_URL="http://lede-project.org/" LEDE_DEVICE_PRODUCT="Generic" LEDE_DEVICE_REVISION="v0" LEDE_RELEASE="LEDE Test Release 16.12-CURRENT r2399" On a release tag, those files would look like: # cat /etc/openwrt_version r2500 # cat /etc/openwrt_release DISTRIB_ID='LEDE' DISTRIB_RELEASE='17.02.1' DISTRIB_REVISION='r2500' DISTRIB_CODENAME='mighty_unicorn' DISTRIB_TARGET='x86/64' DISTRIB_DESCRIPTION='LEDE Mighty Unicorn 17.02.1 r2500' DISTRIB_TAINTS='no-all override' # cat /usr/lib/os-release NAME="LEDE" VERSION="17.02.1, Mighty Unicorn" ID="lede" ID_LIKE="lede openwrt" PRETTY_NAME="LEDE Mighty Unicorn 17.02.1" VERSION_ID="17.02.1" HOME_URL="http://lede-project.org/" BUG_URL="http://bugs.lede-project.org/" SUPPORT_URL="http://forum.lede-project.org/" BUILD_ID="r2500" LEDE_BOARD="x86/64" LEDE_TAINTS="no-all override" LEDE_DEVICE_MANUFACTURER="LEDE" LEDE_DEVICE_MANUFACTURER_URL="http://lede-project.org/" LEDE_DEVICE_PRODUCT="Generic" LEDE_DEVICE_REVISION="v0" LEDE_RELEASE="LEDE Mighty Unicorn 17.02.1 r2500" Signed-off-by: Jo-Philipp Wich <jo@mein.io> Acked-by: Felix Fietkau <nbd@nbd.name>
* base-files: add a wrapper for init scripts in profileAlberto Bursi2016-11-291-0/+9
| | | | | | | | | | | "service" is a simple wrapper that will allow to call init.d scripts current method: # /etc/init.d/network reload with the wrapper: # service network reload If the wrapper is called without arguments or with a wrong init script name, it will print an error and list the content of /etc/init.d/ folder Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* base-files: Prefer busybox arp over /proc/net/arp aliasMarek Lindner2016-11-101-1/+1
| | | | | | | | | A firmware compiled with BUSYBOX_CONFIG_ARP should also use by default the arp binary from busybox. Otherwise the extra functionality the user requested can only be used when running arp with the path to the binary. Signed-off-by: Marek Lindner <marek.lindner@open-mesh.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* base-files, mac80211, broadcom-wl: wifi detection and configurationChristian Lamparter2016-11-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the wifi detection script is executed as part of the (early) boot process. Pluggable wifi USB devices, which are inserted at a later time are not automatically detected and therefore they don't show up in LuCI. A user has to deal with wifi detection manually, or restart the router. However, the current "sleep 1" window - which the boot process waits for wifi devices to "settle down" - is too short to detect wifi devices for some routers anyway. For example, this can happen with USB WLAN devices on the WNDR4700. This is because the usb controller needs to load its firmware from UBI and initialize, before it can operate. The issue can be seen on a BT HomeHub 5A as well as soon as the caldata are on an ubi volume. This is because the ath9k card has to be initialized by owl-loader first. Which has to wait for the firmware extraction script to retrieve the pci initialization values inside the caldata. This patch moves the wifi configuration to hotplug scripts. For mac80211, the wifi configuration will now automatically run any time a "ieee80211" device is added. Likewise broadcom-wl's script checks for new "net" devices which have the "wl$NUMBER" moniker. Issues with spawning multiple interface configuration - in case the detection script is run concurrently - have been resolved by using a named section for the initial configuration. Concurrent configuration scripts will now simply overwrite the same existing configuration. A workaround which preserves the "sleep 1" window for just the first boot has been added. This allows the existing brcm47xx boot and mvebu uci-default scripts to correctly setup the initial mac addresses and regulatory domain. And finally, the patch renames the "wifi detect" into "wifi config". As the script no longer produces any output that has to be redirected or appended to the configuration file. Thanks to Martin Blumenstingl for helping with the implementation and testing of the patch. Acked-by: Jo-Philipp Wich <jo@mein.io> Signed-off-by: Mathias Kresin <dev@kresin.me> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files, mac80211, broadcom-wl: use uci to populate wireless configChristian Lamparter2016-11-031-5/+1
| | | | | | | | | | | | | | | | | | | | Previously, wifi detect simply dumped its generated wireless configuration to STDOUT. A second step was needed to append the configuration to /etc/config/wireless (or create it, if it didn't exist). With this patch, The wifi detection script will now use uci to update the wireless configuration directly. This patch also makes the initially created wifi-iface a named section ('default_radio$X' for mac80211 and 'default_wl$X' for broadcom). With this change, uci will not print the cfgHASH to STDOUT (which would now corrupt the wireless configuration). It will also prevent adding duplicated wifi interface configurations, if the wifi configuration is run concurrently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* base-files: sysfixtime: Keep RTC time in UTC timezonePetr Štetiar2016-10-311-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to tell hwclock with -u commandline option, that we would like to keep our RTC clock in UTC timezone. Linux kernel expects RTC in UTC timezone anyway. In current state of things, we don't tell hwclock to load/store time from/to RTC in UTC timezone so it uses the timezone from the system time. If it's set to different timezone then UTC, sysfixtime is going to screw the time in RTC. I've following in the setup script: uci set system.@system[0].timezone='CET-1CEST,M3.5.0,M10.5.0/3' uci set system.@system[0].zonename='Europe/Prague' I've this RTC setup (rtc1 is RTC on i.MX6 SoC, rtc0 is battery backed RTC mcp7941x): rtc-ds1307 3-006f: rtc core: registered mcp7941x as rtc0 snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 Then we can experience following (current time is 10:15am): $ date Fri Oct 21 10:15:07 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 08:14:46 2016 0.000000 seconds $ hwclock -u -r -f /dev/rtc0 Fri Oct 21 10:14:46 2016 0.000000 seconds And after current broken sysfixtime: $ /etc/init.d/sysfixtime stop $ date Fri Oct 21 10:15:25 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 10:15:31 2016 0.000000 seconds Now we've time in our battery backed RTC in CEST timezone instead of UTC. Then once again, but with this patch applied to sysfixtime, where hwclock is using correctly the -u parameter: $ /etc/init.d/sysfixtime stop $ date Fri Oct 21 10:15:53 CEST 2016 $ hwclock -r -f /dev/rtc0 Fri Oct 21 08:15:55 2016 0.000000 seconds Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: Jo-Philipp Wich <jo@mein.io>
* base-files: Ensure reset only works if an overlay existsChris Blake2016-10-271-1/+5
| | | | | | | | | | | | | | Currently the reset script will try to run jffs2reset on boards that are running a rw rootfs, such as ext4. This will cause jffs2reset to fail and the board to never reboot while the LED blinks until a manual reboot. This commit does two different things: 1. Disables reset on boards that do not have an overlay mount 2. Disables the Blinking LED after 5 seconds if the board does not support reset Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* base-files: add ucidef_set_led_usbport for full usbport supportRafał Miłecki2016-10-221-0/+1
| | | | | | | | | | | | | | | | | | | | This helper allows using usbport trigger directly. It requires usbport compatible syntax and supports specifying multiple USB ports, e.g.: ucidef_set_led_usbport "usb" "USB" "devicename:colour:function" "usb1-port1" "usb2-port1" This adds a proper object to the board.json, e.g. "usb": { "name": "USB", "type": "usbport", "sysfs": "devicename:colour:function", "ports": [ "usb1-port1", "usb2-port1" ] } and supports translating it into uci section. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* switch to the new usbport LED triggerRafał Miłecki2016-10-191-5/+16
| | | | | | | This makes init.d script handle existing UCI entries using the new trigger. It also switches all targets to use its package. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* procd: Allow initscripts to start one daemon instance at a timePierre Lebleu2016-10-181-1/+3
| | | | Signed-off-by: Pierre Lebleu <pierre.lebleu@technicolor.com>
* base-files: fix check for empty password warningMatthias Schiffer2016-09-261-2/+1
| | | | | | | | | | | | | Now that we know that the password is in /etc/shadow and not in /etc/passwd, we can properly fix the logic for the empty password check. Only 'root::' is an empty password, 'root:x:' and 'root:!:' allow no password login at all. This fixes the empty password warning still showing after the root password has been locked using 'passwd -l root' (e.g. to allow public-key auth only). Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* treewide: remove bad local shell variable declarationsJo-Philipp Wich2016-09-242-3/+3
| | | | | | | Local variable declarations outside of functions are illegal since the Busybox update to v1.25.0, therfore remove them from the appropriate places. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* base-files: remind users to set root passwordJohn Crispin2016-09-191-0/+13
| | | | | | print a warning when a shell spawns, telling users to set a root password. Signed-off-by: John Crispin <john@phrozen.org>
* base-files: reduce vm.min_free_kbytes for devices with 32M RAMFelix Fietkau2016-09-161-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: support oneshot leds properly.Karl Palsson2016-09-051-1/+1
| | | | | | | | | | oneshot trigger configurations for LEDs are created, but the on/off timing configurations are ignored. generate_config is correctly creating oneshot configs, but the later led script doesn't recognise the trigger details. Fixes: c0c3f2d4c917 leds: support oneshot as well as timer triggers Signed-off-by: Karl Palsson <karlp@etactica.com>
* base-files: let config_generate call board_detectJonas Gorski2016-08-131-1/+1
| | | | | | | Instead of board_detect generating the config as a side effect, let config_generate call board_detect as needed. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* preinit: use only the image config optionsMathias Kresin2016-08-101-17/+0
| | | | | | | | | | The pi_* variables and the fs_failsafe_wait_timeout variable are set by the CONFIG_TARGET_PREINIT_* config options. No need to maintain the same values twice. All other fs_ variables were never used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: remove unused morse led trigger driverFelix Fietkau2016-08-041-5/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: remove dead codeDaniel Golle2016-08-041-6/+0
| | | | | | | | | /etc/init.d/boot tried to create /dev/root based on the kernel's cmdline which won't work on any recent targets. Remove that code now that fstools can detect the mounted rootfs based on /proc/self/mountinfo and /dev/root was long gone anyway. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: increase vm.min_free_kbytesFelix Fietkau2016-08-011-0/+16
| | | | | | | | Network drivers typically allocate memory in atomic context. For that to be reliable, there needs to be enough free memory. Set the value heuristically based on the total amount of system RAM. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: use procd init for urandom_seedEtienne CHAMPETIER2016-07-271-25/+8
| | | | | | | | | | Previous implementation was blocking the init and breaking halt/reboot/sysupgrade (reported by Daniel Golle) v2: use procd logging, use set -e + trap for error handling Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com> Tested-by: Daniel Golle <daniel@makrotopia.org>
* base-files: seed /dev/urandomEtienne CHAMPETIER2016-06-301-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit: 1) seed /dev/urandom with the saved seeds as early as possible (see /lib/preinit/81_urandom_seed) 2) save a seed at /etc/urandom.seed if it doesn't exists 3) save a new seed each boot at "system.@system[0].urandom_seed" (see /etc/init.d/urandom_seed) We use getrandom() so we are sure /dev/urandom pool is initialized Seed size is 512 bytes (ie /proc/sys/kernel/random/poolsize / 8) it's the same size as in ubuntu 14.04 and all systemd systems Seeding /dev/urandom doesn't change entropy estimation, so we still have "random: ubus urandom read with 4 bits of entropy available" messages in the logs, but we can now ignore them if after "urandom-seed: Seeding with ..." message Saving a new seed on each boot is disabled by default to avoid too much writes without user consent v2: log preinit messages to /dev/kmsg v3: use non generic function name for logging, as /lib/preinit/ files are all sourced together in /etc/preinit v4: after a lot of discussion on the ML, use a uci config param v5: config param is now the path of the seed Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com> Acked-by: Jo-Philipp Wich <jo@mein.io>
* base-files: sysfixtime no longer exclude dnsmasq.timeKevin Darbyshire-Bryant2016-06-241-1/+1
| | | | | | | | dnsmasq's dnssec time checking method now uses a ntp hotplug mechanism, therefore dnsmasq.time is redudant and no longer needs to be explicitly excluded from sysfixtime. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* base-files: Add standard os-release fileDaniel Dickinson2016-06-241-0/+1
| | | | | | | | | | | /etc/os-release is the standard distribution release information file, therefore add it (and image configuration options for fields not previously present in LEDE). Once it is deemed reasonable the non-standard openwrt_release, openwrt_version, and device_info files could be removed (that is with this patch we consider them deprecated in favour of the standard file). Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
* base-files: remove fstab symlinkJohn Crispin2016-06-171-0/+1
| | | | | | the symlink no longer gets used since we switched to the block-mount tool. Signed-off-by: John Crispin <john@phrozen.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 18:05:36 +0000