aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-envtools/files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: PowerCloud CR5000 openwrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | OpenWrt configuration part of support for the PowerCloud Systems CR5000. The CR5000 is a dual-band 802.11n wireless router with 8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and five port gigabit ethernet switch. The CR5000 was sold as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47946
* ar71xx: PowerCloud CR3000 OpenWrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | OpenWRt configuration part of support for the PowerCloud Systems CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast ethernet wan port that was sold by PowerCloud Systems as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47945
* ar71xx: PowerCloud CAP324 OpenWrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | | | | Openwrt configuration part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP is a device sold by PowerCloud Systems who's stock firmware (CloudCommand) provides 'cloud' based managment of large numbers access points. The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a wall wart. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47944
* uboot-envtools: add support for linkits7688dJohn Crispin2015-11-181-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47500
* uboot-envtools: kirkwood: fix EA35/4500 board namesLuka Perkov2015-11-111-4/+4
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47457
* kirkwood: rework Linksys EA[34]500 DTSLuka Perkov2015-11-101-1/+1
| | | | | | | | | | | | | | | - Use board engineering names rather than marketing names - Linksys uses a dual firmware layout, where the bootloader will switch to the other stored image when one fails to boot three consecutive times. In order to make this firmware compatible with the factory images and the stock bootloader we must match this layout. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47429
* uboot: create the uboot config file for the shelby as wellImre Kaloz2015-11-031-1/+1
| | | | | | | | fixes #20827 Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 47365
* ramips: add LinkIt Smart7688 supportJohn Crispin2015-10-191-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47203
* uboot-envtools: Add Gateworks Ventana SupportLuka Perkov2015-10-101-0/+11
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47167
* uboot_envtools: add P2812HNUF1John Crispin2015-10-051-0/+3
| | | | | | | | Add generation of /etc/fw_env.config for P2812HNUF1 Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> SVN-Revision: 47133
* package/uboot-envtools: add OpenMesh MR1750 supportJohn Crispin2015-09-141-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46931
* mvebu: add support for the Linksys Caiman and CobraImre Kaloz2015-04-161-2/+5
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 45456
* mvebu: migrate mamba support to the upstreamed codeImre Kaloz2015-04-121-1/+1
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 45400
* uboot-envtools: add ramips wsr-600/1166 supportFelix Fietkau2015-03-191-0/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44897
* package/uboot-envtools: add OpenMesh OM5P-AN supportJohn Crispin2015-03-171-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 44865
* package: uboot-envtools: add nbg6716 to appropriate groupLuka Perkov2015-02-071-3/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44308
* uboot-envtools: fix Linksys EA3500 env sizeLuka Perkov2015-01-181-1/+3
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 44037
* uboot-envtools: add more kirkwood boardsLuka Perkov2014-12-181-1/+4
| | | | | | | | | | - SheevaPlug - SheevaPlug with eSATA - GuruplugServerPlus Signed-off-by: Gerald Kerma <dreagle@doukki.net> SVN-Revision: 43747
* uboot-envtools: use environment stored in UBI also for KD20John Crispin2014-12-031-4/+2
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43510
* uboot-envtools: add support for oxnas targetJohn Crispin2014-11-261-0/+29
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43390
* uboot-envtools: add carambola2 supportJohn Crispin2014-11-191-0/+1
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 43317
* package/uboot-envtools: add OpenMesh MR900v2 supportJohn Crispin2014-11-141-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43269
* package/uboot-envtools: add OpenMesh MR900 supportJohn Crispin2014-11-141-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 43263
* kirkwood: add support for Linksys EA3500Luka Perkov2014-11-101-0/+1
| | | | | | | | http://wiki.openwrt.org/toh/linksys/ea3500 Signed-off-by: Dan Walters <dan@walters.io> SVN-Revision: 43230
* ar71xx: qihoo-c301: reset imageNtrynum after each successful boot.John Crispin2014-10-141-0/+3
| | | | | | | | | | | | | | | | | | | | | | | Qihoo C301 has 2 flash chips of which one is used as primary and the other is used as backup. OEM U-Boot will try to boot an activeregion N with imageNstatus=0 and imageNtrynum <= imagemaxtry. If such a region is found, bootloader will try to increment imageNtrynum and boot it. This patch tries to reset imageNtrynum after each successful boot (if the boot process reaches the execution of /etc/init.d/done). root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9 00000000 9e f3 63 91 61 63 74 69 76 65 72 65 67 69 6f 6e |..c.activeregion| 00000010 3d 31 00 69 6d 61 67 65 31 73 74 61 74 75 73 3d |=1.image1status=| 00000020 30 00 69 6d 61 67 65 32 73 74 61 74 75 73 3d 30 |0.image2status=0| 00000030 00 69 6d 61 67 65 32 74 72 79 6e 75 6d 3d 30 00 |.image2trynum=0.| 00000040 69 6d 61 67 65 6d 61 78 74 72 79 3d 33 00 69 6d |imagemaxtry=3.im| 00000050 61 67 65 31 74 72 79 6e 75 6d 3d 30 00 00 00 00 |age1trynum=0....| 00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 42914
* package/uboot-envtools: add OpenMesh OM5P supportJohn Crispin2014-07-201-0/+1
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 41774
* package/uboot-envtools: add support for the EnGenius EAP300 v2 boardGabor Juhos2014-07-141-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41660
* package/uboot-envtools: add support for the Tube2H boardGabor Juhos2014-07-141-0/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41651
* lantiq: configure uboot-envtools on BTHOMEHUBV2B and make it work correctly ↵John Crispin2014-07-131-1/+4
| | | | | | | | | | | | | | on other lantiq boards Generate the configuration file for uboot-envtools on BTHOMEHUBV2B. Adds the specific parameters for the BTHOMEHUBV2B and also fixes an incorrect path which would have affected other lantiq boards as well (currently only the GIGASX76X). Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 41597
* add mvebu supportImre Kaloz2014-06-291-0/+25
| | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 41380
* uboot-envtools: use new scripts from /lib/ to match boardsLuka Perkov2014-06-262-7/+11
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 41340
* package/uboot-envtools: add OpenMesh OM2P-HSv2 supportJohn Crispin2014-06-021-0/+1
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40965
* package/uboot-envtools: add OpenMesh OM2Pv2 supportJohn Crispin2014-06-021-0/+1
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 40959
* uboot-envtools: add support for kirkwood ea4500Luka Perkov2014-05-281-1/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 40872
* uboot-envtools: add Pogoplug E02 supportLuka Perkov2014-05-231-0/+1
| | | | | | | | | | The settings require that the OpenWrt provided u-boot is used as either first or second stage bootloader as it modifies the partitioning scheme to move the u-boot environment to a separate mtd partition. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 40829
* uboot-envtools: add support for the ZyXEL NBG6716 boardGabor Juhos2014-04-131-0/+3
| | | | | | | | Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40501
* uboot-envtools: add support for wndr3700Luka Perkov2014-01-241-2/+3
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39380
* uboot-envtools: add support for mxs targetZoltan Herpai2013-11-121-0/+26
| | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 38776
* uboot-envtools: update kirkwood scriptsLuka Perkov2013-10-141-6/+3
| | | | | | | | Also, scripts can be installed as data so let's change that here too. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38403
* uboot-env: fix spurious esac within ramips uci-defaultsLuka Perkov2013-08-191-2/+0
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 37814
* uboot-envtools: add support for hornet-ub-x2Luka Perkov2013-08-151-0/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37789
* uboot-env: add config for the ALFA NETWORKS Hornet-UB (AP121U)Luka Perkov2013-07-171-0/+1
| | | | | | Signed-off-by: Daniel Golle <daniel.golle@gmail.com> SVN-Revision: 37382
* uboot-envtools: add support for imx6 targetLuka Perkov2013-07-021-0/+24
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37136
* This adds Gateworks Laguna family board support. Note that some Laguna ↵Luka Perkov2013-04-111-0/+28
| | | | | | | | boards have SPI flash and others have NOR flash, thus the size/erasesize are detected dynamically. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 36313
* uboot-env: wzr-600dhp uses wzr-hp-ag300h nameLuka Perkov2013-03-031-2/+1
| | | | SVN-Revision: 35866
* ar71xx: add support for Buffalo WZR 600DHPLuka Perkov2013-03-011-1/+5
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 35840
* uboot-envtools: add config for the Edimax BR-6425 boardGabor Juhos2013-02-021-0/+5
| | | | | | | Signed-off-by: Yuval Adam <yuv.adm@gmail.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35464
* package/uboot-envtools: add OpenMesh MR600v2 supportGabor Juhos2013-02-011-1/+2
| | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35432
* package/uboot-envtools: add OpenMesh MR600 supportGabor Juhos2012-11-181-1/+2
| | | | | | | Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 34236
* package/uboot-envtools: add CAP4200AG supportGabor Juhos2012-10-271-1/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 33959