aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-lantiq
Commit message (Collapse)AuthorAgeFilesLines
* uboot-lantiq: Enable TFTP PUT support for backupsCarl-Daniel Hailfinger2017-08-181-1/+2
| | | | | | | | | | | | | | | | | Backing up the current firmware from U-Boot over serial can take hours. Booting a working Linux image for backup purposes is not always an option. Using the tftpput command in U-Boot is the fastest and easiest way. tftpput will upload the contents of a memory region to the TFTP server. The IP address of the server is stored in the serverip variable. Usage: tftpput <memaddr> <length> <filename> Example for a complete flash backup of an o2 Box 6431 (VGV7510KW22): VGV7510KW22 # tftpput 0xB0000000 0x1000000 o2boxbackup.bin Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
* uboot-lantiq/spl: fixed uninitialized variable len in spl_uncompress_lzoMartin Schiller2017-05-312-4/+7
| | | | | | This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck) Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* uboot-lantiq: Support newer versions of the PEF7071 ethernetMartin Schiller2017-05-311-1/+1
| | | | | | This fix is taken from uboot-lantiq v2014.07 (Daniel Schwierzeck) Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* u-boot.mk: pass HOSTCC and HOST_CFLAGS into the buildFelix Fietkau2017-04-041-0/+2
| | | | | | | Cuts build time on Mac OS X in half by avoiding repeated $(shell) calls from the build system Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: fix build error on mac os xFelix Fietkau2017-04-041-0/+18
| | | | | | asm/* includes are not safe for the host build Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: mark SPL variants as brokenMathias Kresin2017-01-251-0/+5
| | | | | | | | | | | | | | | | | All SPL variants are lzo compressed. The lzop binary is used for compression but is not available in tools. Additionally at least the NAND SPL support is broken and doesn't create working bootloaders. The fb3370 SPI NOR SPL enabled u-boot isn't required for LEDE since the LEDE images are targeting the pre-installed EVA bootloader. Mark these u-boot variants as well as the SPL variants for the reference boards as broken till the lzma issues are fixed upstream and we can use lzma instead of lzo compression. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: fix a tool portability issueFelix Fietkau2017-01-251-3/+3
| | | | | | Use the standard off_t type instead of loff_t Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: switch to using u-boot.mkFelix Fietkau2017-01-241-259/+209
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: fix build issueFelix Fietkau2017-01-221-2/+3
| | | | | | | Do not reference BIN_DIR in the package install section directly, use $(1) instead. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: fix boot of images larger than 8MBMathias Kresin2017-01-0212-12/+36
| | | | | | | | Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to support uncompressing images larger than 8 MB when using the bootm command. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: fix build with gcc6Mathias Kresin2017-01-022-87/+852
| | | | | | | Backport u-boot commit 9b2c282b348dfe966bbba967dc7a45ce817cce50 to fix compile with gcc5 and gcc6. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: clean up download hashesFelix Fietkau2016-12-161-1/+1
| | | | | | Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: Add BT Home Hub 5A supportMathias Kresin2016-11-292-0/+352
| | | | | | | | | | | | | | | | | | Based on the submission to the uboot-lantiq repo by Martin Blumenstingl. Use the ddr_settings.h from the GPL tarball. The NAND boot optimized one (with memory tuning enabled) doesn't work for the UART boot image. Use the same mtd layout as the stock u-boot. Add add UBI support. Use the leds to indicate boot status like it is done with the stock u-boot. Switch on the red power led if kernel image can't be loaded. Otherwise switch the green led on. Make only the ramboot u-boot available. Only this image is required for the first installation of LEDE. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: vgv7519 fix tftp loading of big kernel/image sizeEddi De Pieri2016-11-231-1/+3
| | | | | | | | | | | | | | | | | | On my board: Bytes transferred = 7084442 (6c199a hex) Image Name: MIPS OpenWrt Linux-3.10.49 Created: 2014-11-11 17:40:00 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 7084378 Bytes = 6.8 MiB Load Address: 80002000 Entry Point: 80002000 Verifying Checksum ... OK Uncompressing Kernel Image ... LZMA: uncompress or overwrite error 7 - must RESET b ROM VER: 1.0.5 CFG 01 Signed-off-by: Eddi De Pieri <eddi@depieri.net>
* uboot-lantiq: package does not build inside the SDKJohn Crispin2016-08-031-1/+1
| | | | | | | the packages failed to build inside the SDK due to missing ethernet firmware files. Signed-off-by: John Crispin <john@phrozen.org>
* uboot-lantiq: Add Arcadyan ARV7506PW11 supportMathias Kresin2016-06-222-0/+295
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: get rid of bogus profile dependenciesFelix Fietkau2016-06-081-43/+43
| | | | | | Turn them into subtarget dependencies instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: replace nbd@openwrt.org with nbd@nbd.nameFelix Fietkau2016-06-071-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-lantiq: VGV7510KW22 - remove NOR SPL leftoversMathias Kresin2016-05-271-6/+2
| | | | | | Missed this one with my last cleanup patch. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: Add Arcadyan VGV7519 supportMathias Kresin2016-05-272-1/+309
| | | | | | | | | | | | | | | | Based on a submission to the uboot-lantiq repo by Eddi De Pieri. Major cleanup and addition of brnboot second stage u-boot was done by me. The second stage brnboot u-boot is untested, since the brnboot prompt is secured by a still unknown password. But should work. The former ram values are replaced with the ram values extracted from the original brnboot. The old ones didn't worked with the ramboot image. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: vrx200 - lzma compress gphy firmwareMathias Kresin2016-05-272-18/+29
| | | | | | | | | | | | The default bootloader partition of some devices is to small for an u-boot with uncompressed gphy firmware(s). Instead of increasing the bootloader partition size, in compare to the stock firmware, compress the firmware. This would allow the bootloader of at least the FritzBox 3370 as well as the bootloader of the VGV7510KW22 to fit into the bootloader partition of the stock firmware. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: vrx200 - add support for dual nor flashMathias Kresin2016-05-272-12/+30
| | | | | | | | Based on a submission to the uboot-lantiq repo by Eddi De Pieri. Devices like the xrx200 Arcadyan VGV7519 are using two NOR flash chips. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: ARV752DPW - use correct switch driverMathias Kresin2016-05-231-1/+1
| | | | | | There is no RTL8206 switch driver. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: VGV7510KW22 - use ddr ram params from brnbootMathias Kresin2016-05-231-5/+5
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: VGV7510KW22 - use leds to indicate boot statusMathias Kresin2016-05-231-1/+23
| | | | | | | Switch on the red power led if kernel image can't be loaded. Otherwise switch the green led on. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: VGV7510KW22 - cleanup board configMathias Kresin2016-05-231-60/+3
| | | | | | | | | | | | | | According to the author, all SPI related configs are copy & paste leftovers. Which makes sense since nothing is connected to the SPI bus on this device. The NOR SPL isn't required for this board, since the NOR is directly memory mapped. Allow to overwrite the env in ram while using brn variant. Do not set the power GPIO pin twice. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: reorder and rework patchesMathias Kresin2016-05-2326-814/+706
| | | | | | | | | | | use: - 00nn for u-boot patches - 01nn for new boards While doing the rework, the board definitions for the easy50712 and easy80920 were moved to distinct board definitions patches. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: drop unused board patchesMathias Kresin2016-05-237-1387/+6
| | | | | | | None of the boards is supported by lede. No need to keep the patches in the lede tree. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: fix build with gcc5John Crispin2015-12-113-0/+222
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47863
* uboot-lantiq: Add SoC version 1.2 support for Arcadyan VGV7510KW22John Crispin2015-11-021-2/+5
| | | | | | | | This fixes #20409 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 47352
* uboot-lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)John Crispin2015-07-072-0/+260
| | | | | | | | uboot-lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V) Signed-off-by: Jannis Pinter <jannis@pinterjann.is> SVN-Revision: 46225
* uboot-lantiq: Add Arcadyan VGV7510KW22 supportJohn Crispin2015-06-052-1/+363
| | | | | | | This is already applied in Daniel's ("upstream") tree and thus will be part of upcoming version(s). SVN-Revision: 45898
* uboot-lantiq: fix P-2812HNU-F1/3 package dependencyJohn Crispin2015-01-281-2/+2
| | | | | | | | | | After r43987 TARGET_lantiq_xrx200_P2812HNUFX does not exist anymore. Fix empty menuconfig bootloader selection by making u-boot depend on one of the new target profiles. Signed-off-by: Antti Seppälä <a.seppala@gmail.com> SVN-Revision: 44179
* uboot-lantiq: add a cgu fix for arx100John Crispin2015-01-231-0/+148
| | | | | | | | http://patchwork.ozlabs.org/patch/431024/ Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44086
* packages: fix typo in OpenWrt nameJohn Crispin2014-12-071-1/+1
| | | | | | Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 43542
* uboot-*: update license info in uboot packagesLuka Perkov2014-11-291-0/+3
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 43429
* license info - revert r43155John Crispin2014-11-031-3/+0
| | | | | | | | turns out that r43155 adds duplicate info. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43167
* Add more license tags with SPDX identifiersJohn Crispin2014-11-031-0/+3
| | | | | | | | | | | | | | | | | | Note, that licensing stuff is a nightmare: many packages does not clearly state their licenses, and often multiple source files are simply copied together - each with different licensing information in the file headers. I tried hard to ensure, that the license information extracted into the OpenWRT's makefiles fit the "spirit" of the packages, e.g. such small packages which come without a dedicated source archive "inherites" the OpenWRT's own license in my opinion. However, I can not garantee that I always picked the correct information and/or did not miss license information. Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 43155
* lantiq: re-add 0041-lzma-fixup.patch to ubootJohn Crispin2014-07-161-0/+44
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41671
* lantiq: Add ARV7510PW22 supportJohn Crispin2014-06-023-0/+258
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40918
* uboot-lantiq: remove duplicate defineLuka Perkov2014-05-191-2/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 40779
* Add Zyxel P-2812HNU-Fx imagesJohn Crispin2014-04-221-1/+16
| | | | | | | | P-2812HNU-Fx images are already supported but not generated. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40548
* Add Fritz!Box 3370 imagesJohn Crispin2014-04-221-1/+22
| | | | | | | | Fritz!Box 3370 images are already supported but not generated. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40547
* Refresh patchesJohn Crispin2014-04-2240-908/+98
| | | | | | | | Refresh uboot-lantiq patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40546
* Create firmware directory if it doesn't existJohn Crispin2014-04-221-0/+1
| | | | | | | | Fixes package refreshing. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40545
* Depend on lantiq boardJohn Crispin2014-04-221-2/+30
| | | | | | | | | | Depend on lantiq board. ARV7510 depends on ARV4510 because (according to OpenWrt wiki) both boards are identical except for the unsupported WiFi. Moreover, ARV7510 isn't especifically supported and ARV4510 images valid. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 40544
* lantiq: remove uboot lzma patch, apparently its not needed after allJohn Crispin2014-04-161-44/+0
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40521
* uboot-lantiq: backport lzma fixJohn Crispin2014-04-161-0/+44
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 40520
* uboot-lantiq: enable parallel buildingJohn Crispin2014-04-121-0/+2
| | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> SVN-Revision: 40488
* uboot-lantiq: reuse/copy VR9 GPHY firmware blobs from target/linux/lantiqJohn Crispin2014-04-121-0/+15
| | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> SVN-Revision: 40487
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 03:09:19 +0000