aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-sunxi/patches
Commit message (Collapse)AuthorAgeFilesLines
* sunxi: Add support for Banana Pi M2 UltraHal Martin2019-09-211-0/+25
| | | | | | | | | | | | | | | | | | CPU: Allwinner R40 Quad-Core Cortex-A7 @ 1.2GHz GPU: Mali 400 MP2 Memory: 2GB DDR3 onboard (shared with GPU) Onboard: Storage microSD card slot Onboard: Storage 8GB eMMC Onboard: Network 10/100/1000M Ethernet RJ45 Onboard: Network WiFi 802.11b/g/n 1x1 (AMPAK AP6212; brcmfmac) Onboard header: SPI, I2C, GPIO, UART USB: Two USB 2.0 Host, One USB 2.0 OTG Known issues: - WiFi doesn't work - eMMC not supported Signed-off-by: Hal Martin <hal.martin@gmail.com>
* uboot-sunxi: add fix for A20-OLinuXino-Lime2-eMMC rev. K boardsZoltan HERPAI2019-03-131-0/+44
| | | | | | | The OLinuXino Lime2 rev. K boards use new PHYs (Micrel KSZ9031), so enable that. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: bump to 2019.01Zoltan HERPAI2019-03-134-7/+7
| | | | | | | | | | | | | | Tested on: Bananapro (A20) Banana Pi M3 (A83t) Linksprite pcDuino3 (A20) Olinuxino Lime (A10) Orange Pi 2 (H3) Pine64 (A64) Patches refreshed. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: Orange Pi Zero Plus: Fix SdCard detectionHauke Mehrtens2019-01-131-0/+28
| | | | | | | | | The Detection pin is at PF6 and not at PH13 like defined before. I checked the schematics and now I am am not seeing this error message any more: Loading Environment from FAT... Card did not respond to voltage select! Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: disable AXP209 on Olimex A13 OlinuxinoZoltan HERPAI2019-01-131-0/+19
| | | | | | | | | | | | | | Disable the PMIC on Olimex A13 Olinuxino, as the SPL cannot set the core voltage correctly, which causes the board to freeze later at kernel if CPU throttling is enabled (see below). This will almost certainly kill the VGA output (which requires LDO3 to be set), but this is still a better option than to disable CPU throttling for all Cortex-A8 based devices. [ 2.485632] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 384000 KHz [ 2.525698] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 432000 KHz Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: update Theobroma A31 Pangolin supportZoltan HERPAI2019-01-131-3/+1
| | | | | | Drop removed pinctrl definitions from the i2c3 pin layout. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: Update to version 2018.11Hauke Mehrtens2019-01-1311-479/+15
| | | | | | | This updates the uboot for the sunxi target to version 2018.11 The removed patches are applied upstream and not needed any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: update Orange Pi R1 and Zero PlusHauke Mehrtens2018-06-183-98/+257
| | | | | | | The device tree files are now matching the kernel 4.17 and this will be send also for integration into mainline U-Boot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: update to version 2018.05Hauke Mehrtens2018-06-1813-193/+37
| | | | | | | | | | This patch 220-add-sunxi50i-nanopi-neo-plus2.patch was merged upstream. The u-boot-sunxi-with-spl.bin is now also created for the ARM64 sunxi boards by U-Boot itself, no need to do it manually any more. This was tested on a H2+ Orange Pi R1 and a H5 Orange Pi Zero Plus. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: refresh patchesZoltan HERPAI2018-03-217-12/+12
| | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: fix build by adding comparabilities for old dtcHauke Mehrtens2018-03-211-0/+52
| | | | | | | | | We use the dtc from the kernel and that does not have all the options which u-boot would like to use now. make these parameters optional. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> [wigyori@uid0.hu: renamed to 221-compatible-old-dtc.patch from 220-] Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: bump again to 2017.11Zoltan HERPAI2018-03-2110-390/+34
| | | | | | | | | | | | | | | Runtime-tested on: - Pine64 (A64) - Orange Pi 2 (H3) - Bananapro (A20) - Olimex A20-Micro (A20) - Pcduino v3 (A20) - Pcduino v2 (A10) Compile-tested on: - all A8/A7/A53 boards Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: Add Xunlong Orange Pi Zero PlusHauke Mehrtens2018-02-171-0/+148
| | | | | | | This is based on a patch from armbian: https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-orangepi-zeroplus.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: add u-boot DT for NanoPi NEO Plus2 boardAntony Antony2018-02-171-0/+165
| | | | | | u-boot upstream commit 6130b1f6bc23 Signed-off-by: Antony Antony <antony@phenome.org>
* uboot-sunxi: dts: Update orange Pi R1 integrationHauke Mehrtens2018-02-172-146/+73
| | | | | | | | This syncs the Orange Pi R1 device tree files with the one from the upstream kernel and also uses the default configuration from the Orange Pi Zero. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "uboot-sunxi: bump to 2017.11"Zoltan HERPAI2018-02-1610-34/+390
| | | | | | | | This reverts commit 805f756d6e4ff5061380baf5e262aec72abcf195. Move back to 2017.07 until we move sunxi to GCC7. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* Revert "uboot-sunxi: refresh patches"Zoltan HERPAI2018-02-166-10/+10
| | | | | | | | This reverts commit f142de5f44bcba8cb0f12e5b1fd26cd9867cf866. Revert until we can move to 2017.11 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* Revert "uboot-sunxi: fix build by adding comparabilities for old dtc"Zoltan HERPAI2018-02-161-52/+0
| | | | | | | | This reverts commit ef0416666f48e1e7793c4230cec18c8cdd3e1003. Revert until we can move to 2017.11 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: fix build by adding comparabilities for old dtcHauke Mehrtens2018-02-101-0/+52
| | | | | | | We use the dtc from the kernel and that does not have all the options which u-boot would like to use now. make these parameters optional. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: refresh patchesHauke Mehrtens2018-02-106-10/+10
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: bump to 2017.11Zoltan HERPAI2018-02-0610-390/+34
| | | | | | | | | | | | | | | Runtime-tested on: - Pine64 (A64) - Orange Pi 2 (H3) - Bananapro (A20) - Olimex A20-Micro (A20) - Pcduino v3 (A20) - Pcduino v2 (A10) Compile-tested on: - all A8/A7/A53 boards Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* uboot-sunxi: Backport fix for stale CONFIG_SUNXIG_GMAC referencesFlorian Fainelli2017-10-235-28/+84
| | | | | | | | | | This backports the upstream commit fixing stale references to CONFIG_SUNXI_GMAC which have been later replaced by CONFIG_SUN7I_GMAC. This fixes the designware MAC pinmuxing on e.g: Lamobo R1. Refresh patches while we are at it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* sunxi: add Orange Pi R1 supportHauke Mehrtens2017-10-012-0/+230
| | | | | | | | | | | | | | | The following features are working and tested: * both Ethernet ports * MMC * LED The following features are not working: * Wifi (There is a crappy driver we could port) * SPI flash (I haven't looked into this) I haven't tried out the rest. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: improve A20 Lime2 upload speedLucian Cristian2017-09-302-1/+14
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* sunxi: add Olimex A20-OLinuXino-LIME2-eMMCLucian Cristian2017-09-242-0/+106
| | | | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [replaced u-boot patch with original version from u-boot git] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: revert the usage of binmanHauke Mehrtens2017-09-184-0/+221
| | | | | | This will avoid the usage of swig. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: do not depend on dtc being install on hostHauke Mehrtens2017-09-181-0/+35
| | | | | | make mkimage check the DTC environment variable first. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: update to version 2017.07Hauke Mehrtens2017-09-1818-9075/+27
| | | | | | | The deleted patches are already integrated in the upstream U-Boot version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-sunxi: clean up, switch to u-boot.mkFelix Fietkau2017-01-241-11/+0
| | | | | | | | Instead of referencing u-boot packages from device profiles and having a -all metapackage, make the u-boot packages hidden (they don't install to bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-sunxi: fix default config for OLIMEX A13 SOM (FS#239)Jo-Philipp Wich2016-11-0220-277/+58
| | | | | | | | | | | | | | | | | | The current uboot default config for the A13 SOM erroneously enables support for the AXP209 power regulator IC which is not present on the board. This superfluous support module sets an incorrect initial clock frequency and confuses the kernel, ultimately leading to a boot failure later on. Properly disable the PMIC support and enable the EHCI support by translating the deprecated SYS_EXTRA_OPTIONS values into proper SUNXI_NO_PMIC and USB_EHCI_HCD symbols respectively. Also rename 002-add-olimex-a13-som.diff to 002-add-olimex-a13-som.patch and refresh the remaining patches of the series while we're at it. Reported-by: Mario Fischer <mario-fischer@web.de> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* package: uboot-sunxi: various changes - bump to 2016.03 - add bugfixes ↵Zoltan Herpai2016-03-2922-206/+9813
| | | | | | | | related to 2016.03 update - sync DTS files with mainline - add support for non-standard uEnv.txt - add initial support for Theobroma A31-yQ7 devboard Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 49089
* packages: uboot-sunxi: fix SATA powerup on BananaproZoltan Herpai2016-02-021-0/+25
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48619
* packages: bump uboot-sunxi to 2016.01Zoltan Herpai2016-01-151-28/+0
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48252
* packages: bump uboot-sunxi to 2016.01-rc3, along with H3 PSCI/SMP patchesZoltan Herpai2016-01-085-0/+209
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48154
* packages: bump uboot-sunxi to enable H3 supportZoltan Herpai2015-12-223-328/+2
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 47959
* packages: uboot-sunxi: update Lamobo R1 patchZoltan Herpai2015-11-191-177/+185
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 47516
* packages: uboot-sunxi: fix mmc transfer timeout for slow sdcards.Zoltan Herpai2015-09-131-0/+42
| | | | | | | | This should fix a issue reported in ticket #20387. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 46894
* packages: uboot-sunxi: bump to 2015.07 - switch to using kernel-supplied dtc ↵Zoltan Herpai2015-07-318-212/+308
| | | | | | | | - refresh olimex-a13-som and lamobo-r1 patches (compile-tested only) Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 46540
* packages: uboot-sunxi: add support for Lamobo R1Zoltan Herpai2015-01-201-0/+24
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44067
* packages: uboot-sunxi: fix GMAC TX delay for BananapiZoltan Herpai2015-01-201-0/+24
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44066
* packages: uboot-sunxi: re-add Olimex A13 SOM which went AWOL in u-boot trunkZoltan Herpai2015-01-181-0/+71
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 44039
* packages: update uboot-sunxi to 2015.01Zoltan Herpai2015-01-181-25006/+0
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 44035
* uboot-sunxi: fix bananapro target, update patchZoltan Herpai2015-01-101-1/+1
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43921
* uboot-sunxi: various updates - use mainline uboot-sunxi version ↵Zoltan Herpai2015-01-096-11517/+25099
| | | | | | | | (2015.01-rc3) - add support for Bananapro Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 43899
* uboot-sunxi: add patch to fix gmac reliability issue on bananapiZoltan Herpai2014-09-281-0/+20
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 42691
* uboot-sunxi: add PSCI support for bringing up secondary core on A20Zoltan Herpai2014-09-171-0/+1495
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 42587
* uboot-sunxi: bump to 2014.04Zoltan Herpai2014-09-063-4342/+3424
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 42422
* uboot-sunxi: add bananapi supportZoltan Herpai2014-06-011-0/+91
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 40899
* uboot-sunxi: update pcDuino3 config - beef up memory clock to 480 - fix ↵Zoltan Herpai2014-05-061-3/+3
| | | | | | | | network config Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 40714
* uboot-sunxi: add support for LinkSprite pcDuino v3 (a20)Zoltan Herpai2014-04-302-0/+57
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 40605
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 17:06:37 +0000