aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* uboot-envtools: mvebu: update uci defaults for Turris OmniaKlaus Kudielka2020-12-042-2/+6
| | | | | | | | | | | | | On the Turris Omnia 2019, u-boot environment is located at 0xF0000, instead of 0xC0000. The switch happened with u-boot-omnia package version 2019-04-2 (May 10, 2019). Check the installed u-boot release, and set the default accordingly. Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com> [bump PKG_RELEASE, use lower case for hex offset] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 04d3b517dc3301e0148a2ce811ffc136568b04bd)
* uboot-envtools: mvebu: fix config for mainline u-bootAndre Heider2020-10-281-1/+8
| | | | | | | | | | | | | Mainline u-boot dynamically passes the mtd partitions via devicetree: $ cat /proc/mtd dev: size erasesize name mtd0: 003f0000 00001000 "firmware" mtd1: 00010000 00001000 "u-boot-env" Add support for this setup. Signed-off-by: Andre Heider <a.heider@gmail.com> (cherry picked from commit 60c9a27cbcc6ba00d75b4b592f507237dbfb460f)
* uboot-envtools: ar71xx: add ZyXEL NBG6616 uboot env supportChristoph Krapp2020-08-101-0/+1
| | | | | | | | | This adds support for ZyXEL NBG6616 uboot-env access Signed-off-by: Christoph Krapp <achterin@googlemail.com> [add "ar71xx" to commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit eb95ca3b5c8b33e3212896f906922eba5f72abb3)
* uboot-kirkwood: fix ethernet and usbPawel Dembicki2020-05-012-1/+39
| | | | | | | | | | | | | | | | | Before 2019.01 version was introduced patch, which changes cache routines: 93b283d4 ("ARM: CPU: arm926ejs: Consolidate cache routines to common file"). Unfortunately that patch make ethernet and usb in kirkwood broken. This patch backport commit 599f7aa5 ("ARM: kirkwood: disable dcache for Kirkwood boards"), which are fix for that problem. Fixes: dc08514e6d ("uboot-kirkwood: update to 2019.01") Run tested: pogoplugv4 Tested-by: Cezary Jackiewicz <cezary@eko.one.pl> [nsa310] Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* uboot-envtools: ath79: add Netgear WNDR3700v2Michal Cieslakiewicz2020-02-071-1/+2
| | | | | | | | | Add Netgear WNDR3700v2 to the list of supported boards. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> [rebase, adjusted commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a09408fa576c6482c21f683662cb2d5a49e14ecf)
* uboot-envtools: ath79: add support for glinet,gl-ar150Kimmo Vuorinen2020-01-231-0/+3
| | | | | | | | | Add ubootenv uci config for GL.inet GL-AR150 Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com> [commit title/message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit a8723c48add5cc8381d88234b9cdda2bb6a866aa)
* uboot-envtools: ar71xx: add support for gl-ar150/-domino/-mifiKimmo Vuorinen2020-01-231-0/+5
| | | | | | | | | Add ubootenv uci config for gl-ar150, gl-domino and gl-mifi Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com> [commit message/title facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit dc6dfaac80f392baef1d0d7b06bb1fc19812e041)
* uboot-envtools: ath79: add support for YunCore XD4200 and A782Piotr Dymacz2019-11-261-1/+3
| | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 5d2a900163d0a161e6fa5e63436b57deea31287e)
* uboot-envtools: ramips: add support for ALFA Network Quad-E4GPiotr Dymacz2019-11-241-0/+1
| | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 10bcf1eb40b728b3583c1a7693111f27a9801dc5)
* uboot-envtools: ramips: add support for ALFA Network R36M-E4GPiotr Dymacz2019-11-241-0/+1
| | | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 3cfea3a32125a2c59dfaa9103804ad51609ebe9d)
* ipq40xx: add support for AVM FRITZ!Repeater 1200David Bauer2019-11-221-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ4019 RAM: 256M DDR3 FLASH: 128M NAND WiFi: 2T2R IPQ4019 bgn 2T2R IPQ4019 a/n/ac ETH: Atheros AR8033 RGMII PHY BTN: 1x Connect (WPS) LED: Power (green/red/yellow) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz1200' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ1200.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz1200.bin uboot0 > mtd write /path/to/uboot-fritz1200.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 7f187229a8e9b7966248b1e024217e07a9fc3e50) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* uboot-fritz4040: update to latest HEADDavid Bauer2019-11-221-3/+3
| | | | | | | | | | f92be9d add support for AVM FRITZ!Repeater 1200 d651302 enable support for Atheros AR8033 PHY e4c857c add machtype override hack Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 36f43b61a74ff12d75989d0aabe052945aacc8cf) Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ath79: update uboot-envtools for Netgear WNR routersMichal Cieslakiewicz2019-11-121-0/+4
| | | | | | | | | Boards added: WNR1000v2, WNR2000v3, WNR612v2, WNDR3700. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> (cherry picked from commit d47b68700644f37084b82845e9557b1e9954f533) [removed WNR1000v2/WNR2000v3 since not supported in 19.07] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ar71xx: update uboot-envtools for Netgear WNR routersMichal Cieslakiewicz2019-11-121-1/+10
| | | | | | | | Boards added: WNR1000v2, WNR2000v3, WNR2200, WNR612v2, WNDR4300. Boards changed: WNDR3700 (u-boot env size is 2 sectors not 1). Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> (cherry picked from commit 11052900494ec8216b9b39ba0b24d5e036f4d323)
* uboot-envtools: Add TARGET_LDFLAGS to fix PIE and RELROHauke Mehrtens2019-11-092-11/+9
| | | | | | | | | | Forward the OpenWrt TARGET_LDFLAGS to the linker of the fw_printenv tool. In addition also use the more standard make invocation script. With this change the fw_printenv tool is built with PIE and Full RELRO support when activated globally in OpenWrt. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com> (cherry picked from commit b7b2be0b268ced260ca8df84be1b0d469aaf6e38)
* uboot-fritz4040: build with ipq40xx "generic" subtargetYousong Zhou2019-11-031-0/+1
| | | | | | | Fixes: 853e4dd3 ("ipqx0xx: add Generic subtarget") Ref: https://forum.openwrt.org/t/ipq40xx-snapshot-not-updated-since-22nd-august/44126 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> (cherry picked from commit 40e3f660c1c0f400092cce09feb8c13bec97caeb)
* uboot-fritz4040: update to 2019-09-07David Bauer2019-09-251-3/+3
| | | | | | | | | | | | | | 572ff7f fritzcreator: actually add checksum spacer 6edce1a fritzcreator: replace obscure padding generation with something more portable 2ff189f add ASUS RT-AC58U "easy install" factory u-boot shim b91f9c2 readd spi-nand support 486ae53 improve cmd_sysupgrade b0933f1 replace sstrip with strip 882e48a do not include generated files into git 0c5aa5f fix bugs in ipq40xx_cdp.c Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit af63436d2d0dc3c07d1cb11b018e486994942c6c)
* build: include BUILD_VARIANT in PKG_BUILD_DIRJeffery To2019-09-041-1/+0
| | | | | | | | | | | | This changes the default PKG_BUILD_DIR to take BUILD_VARIANT into account (if set), so that packages do not need to manually override PKG_BUILD_DIR just to handle variants. This also updates most base packages with variants to use the updated default PKG_BUILD_DIR. Signed-off-by: Jeffery To <jeffery.to@gmail.com> (cherry picked from commit e545fac8d968864a965edb9e50c6f90940b0a6c9)
* kexec-tools: change kdump.init STOP indexJoseph Tingiris2019-09-042-2/+2
| | | | | | | | | | This patch is in a series to allow additional STOP indexes after umount, so that other block devices may stop cleanly. kdumpinit is now STOP=90 Signed-off-by: Joseph Tingiris <joseph.tingiris@gmail.com> (cherry picked from commit 5883b5a1f888c7f18da75eb4a1df9003a8bcc9f2)
* treewide: fix syntax errors exposed after kconfig updateJo-Philipp Wich2019-09-041-2/+2
| | | | | | | | | | | | | | | After commit e82a4d9cfb ("config: regenerate *_shipped sources") the mconf parser became more strict as a side effect and started to spew a series of warnings when evaluating our generated kconfig sources: tmp/.config-package.in:705:warning: ignoring unsupported character '@' The root cause of these warnings is a wrong use of the @SYMBOL dependency syntax in various Makefile. Fix the corresponding Makefiles by turning `@SYM||@SYM2` expressions into the proper `@(SYM||SYM2)` form. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit 74739c4228f3bd0aa757165c67c53016c3deb544)
* tfa-layerscape: fix create_pbl and byte_swap host buildBiwen Li2019-07-273-2/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - make create_pbl and byte_swap as host tools - fix a bug that maybe use the cross compiler to compile create_pbl and byte_swap: # -a option appends the image for Chassis 3 devices in case of non secure boot aarch64-openwrt-linux-musl-gcc -Wall -Werror -pedantic -std=c99 -O2 -DVERSION=v1.5(release):reboot-10604-ge9216b3336 -D_GNU_SOURCE -D_XOPEN_SOURCE=700 -c -o create_pbl.o create_pbl.c cc1: note: someone does not honour COPTS correctly, passed 0 times LD create_pbl /usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183) /usr/bin/ld: create_pbl.o: Relocations in generic ELF (EM: 183) create_pbl.o: error adding symbols: File in wrong format collect2: error: ld returned 1 exit status Makefile:43: recipe for target create_pbl failed make[4]: *** [create_pbl] Error 1 plat/nxp/tools/pbl_ch2.mk:45: recipe for target pbl failed make[3]: *** [pbl] Error 2 - add tfa- prefix to all tools in order to avoid future clashes with other toolnames Signed-off-by: Biwen Li <biwen.li@nxp.com> [added missing HOST_CFLAGS, added tfa- prefix to the tools] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit 83d5ca2186f7801d94f336e09f8db0a2c5c5d97f)
* tfa-layerscape: fix fiptool host buildPetr Štetiar2019-07-272-2/+88
| | | | | | | | | | | | | | | | | | | fiptool is a host tool, used in a firmware generation pipeline, but it's not treated as such, leading to the build breakage on the hosts which don't have {Open,Libre}SSL dev package installed: In file included from fiptool.h:16:0, from fiptool.c:19: fiptool_platform.h:18:27: fatal error: openssl/sha.h: No such file or directory # include <openssl/sha.h> So this patch promotes fiptool into the host tool with proper host include and library paths under STAGING_DIR. Ref: https://github.com/openwrt/openwrt/pull/2267 Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit b8249cef9fedb1e2e3ed4f1b16382c6815e08df1)
* mvebu: fix regression for non-generic ESPRESSObin versionsVladimir Vid2019-06-281-0/+3
| | | | | | | | | | | | | | When targets for multiple ESPRESSObin devices were added, not all files were updated which means any ESPRESSObin version beside generic won't have proper networking, sysupgrade and uboot-env. This patch fixes the issue. * fixup network detection * fixup uboot-env * fixup platform.sh for sysupgrade Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> (cherry picked from commit bc47285cb3c0125424e628521f905f1f0d7b4cef)
* layerscape: fix u-boot bootcmdBiwen Li2019-06-063-0/+84
| | | | | | | | | | | Current latest LSDK-19.03 u-boot had a bug that bootcmd environment was always been reset when u-boot started up. This was found on boards with spi NOR boot. Before the proper fix-up is applied, we have to use a workaround to hard code the bootcmd for OpenWrt booting for now. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: convert to use TF-A for firmwareBiwen Li2019-06-066-17/+17
| | | | | | | | | | This patch is to convert to use TF-A for firmware. - Use un-swapped rcw since swapping will be done in TF-A. - Use u-boot with TF-A defconfig. - Rework memory map for TF-A introduction. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: add ARM Trusted Firmware packageBiwen Li2019-06-061-0/+140
| | | | | | | Add TF-A packages for Layerscape to implement trusted firmware. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: drop armv8_32b supportYangbo Lu2019-06-061-84/+0
| | | | | | | NXP LSDK has decided to drop armv8_32b support considering few users are using it. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update u-boot to LSDK 19.03Biwen Li2019-06-061-3/+3
| | | | | | | Update u-boot to LSDK 19.03. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* at91:renaming subtraget legacy to sam9xSandeep Sheriker M2019-05-301-2/+2
| | | | | | renaming subtraget legacy to sam9x for adding new sam9 soc's Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91: Merge SAMA5 subtargetsHauke Mehrtens2019-05-302-24/+24
| | | | | | | | | Instead of maintaining 3 very similar subtargets merge them into one. This does not use the Arm NEON extension any more, because the SAMA5D3 does not support NEON. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Sandeep Sheriker <sandeepsheriker.mallikarjun@microchip.com>
* uboot-imx6: bump to 2019.04 and refresh patchesPetr Štetiar2019-05-204-14/+10
| | | | | | | | | | | | Build tested: apalis, mx6sabresd, nitrogen6dl, nitrogen6dl2g, nitrogen6q, nitrogen6q2g, nitrogen6s, nitrogen6s1g, wandboard Run tested: apalis Cc: Felix Fietkau <nbd@nbd.name> Cc: Vladimir Vid <vladimir.vid@sartura.hr> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-fritz4040: Add host flags for host compilerHauke Mehrtens2019-05-191-2/+2
| | | | | | | | | | | | | This adds the host staging directory to the include path to make it use the zlib.h files from the staging include directory and also link against the zlib version from the staging directory. This fixes a compile problem when the zlib header were not installed on the build host. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [picked from openwrt-18.06]
* ath79: add support for EnGenius ECB1750sven friedmann2019-05-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specification: - Qualcomm Atheros SoC QCA9558 - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 1x 10/100/1000 Mbps Ethernet - 3T3R 2.4 GHz (QCA9558 WMAC) - 3T3R 5.8 Ghz (QCA9880-BR4A, Senao PCE4553AH) https://fccid.io/A8J-ECB1750 Tested and working: - lan, wireless, leds, sysupgrade (tftp) Flash instructions: 1.) tftp recovery - use a 1GbE switch or direct attached 1GbE link - setup client ip address 192.168.1.10 and start tftpd - save "openwrt-ath79-generic-engenius_ecb1750-initramfs-kernel.bin" as "ap.bin" in tfpd root directory - plugin powercord and hold reset button 10secs.. "ap.bin" will be downloaded and executed - afterwards login via ssh and do a sysuprade 2.) oem webinterface factory install (not tested) Use normal webinterface upgrade page und select "openwrt-ath79-generic-engenius_ecb1750-squashfs-factory.bin". 3.) oem webinterface command injection OEM Firmware already running OpenWrt (Attitude Adjustment 12.09). Use OEM webinterface and command injection. See wiki for details. https://openwrt.org/toh/engenius/engenius_ecb1750_1 Signed-off-by: sven friedmann <sf.openwrt@okay.ms> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [use interrupt-driven "gpio-keys" binding]
* ipq40xx: Add support for Linksys EA8300 (Dallas)Jeff Kletsky2019-05-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linksys EA8300 is based on QCA4019 and QCA9888 and provides three, independent radios. NAND provides two, alternate kernel/firmware images with fail-over provided by the OEM U-Boot. Installation: "Factory" images may be installed directly through the OEM GUI. Hardware Highlights: * IPQ4019 at 717 MHz (4 CPUs) * 256 MB NAND (Winbond W29N02GV, 8-bit parallel) * 256 MB RAM * Three, fully-functional radios; `iw phy` reports (FCC/US, -CT): * 2.4 GHz radio at 30 dBm * 5 GHz radio on ch. 36-64 at 23 dBm * 5 GHz radio on ch. 100-144 at 23 dBm (DFS), 149-165 at 30 dBm #{ managed } <= 16, #{ AP, mesh point } <= 16, #{ IBSS } <= 1 * All two-stream, MCS 0-9 * 4x GigE LAN, 1x GigE Internet Ethernet jacks with port lights * USB3, single port on rear with LED * WPS and reset buttons * Four status lights on top * Serial pads internal (unpopulated) "Linksys Dallas WiFi AP router based on Qualcomm AP DK07.1-c1" Implementation Notes: The OEM flash layout is preserved at this time with 3 MB kernel and ~69 MB UBIFS for each firmware version. The sysdiag (1 MB) and syscfg (56 MB) partitions are untouched, available as read-only. Serial Connectivity: Serial connectivity is *not* required to flash. Serial may be accessed by opening the device and connecting a 3.3-V adapter using 115200, 8n1. U-Boot access is good, including the ability to load images over TFTP and either run or flash them. Looking at the top of the board, from the front of the unit, J3 can be found on the right edge of the board, near the rear | J3 | |-| | |O| | (3.3V seen, open-circuit) |O| | TXD |O| | RXD |O| | |O| | GND |-| | | Unimplemented: * serial1 "ttyQHS0" (serial0 works as console) * Bluetooth; Qualcomm CSR8811 (potentially conected to serial1) Other Notes: https://wikidevi.com/wiki/Linksys_EA8300 states FCC docs also cover the Linksys EA8250. According to the RF Test Report BT BR+EDR, "All models are identical except for the EA8300 supports 256QAM and the EA8250 disable 256QAM." Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
* tegra: add vendor string to device nameTomasz Maciej Nowak2019-05-151-1/+1
| | | | | | | for better identification. Also create SUPPORTED_DEVICES string from it which corresponds to dts compatible string. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mvebu: use device-tree board detectionTomasz Maciej Nowak2019-05-111-13/+13
| | | | | | | | Convert whole target to Device Tree based board detection instead of identifying devices by dts file name. With this we can drop mvebu.sh translation script and rely on common method for model detection. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* mvebu: align device names to vendor_device formatTomasz Maciej Nowak2019-05-111-1/+1
| | | | | | | | | | Add vendors in device names and also rename few device names, for easier identyfying potential firmware to flash. The vendor and device string is mainly derived from model/compatipble string in dts from particular device, but since not all devices are well described, some of the renames follow marketing names. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* uboot-tegra: bump to 2019.04Tomasz Maciej Nowak2019-05-051-2/+2
| | | | | | | This version has important change for tegra boards which is reserving 32MB memory for Linux kernel instead of current 16MB. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* xburst: Remove unmaintained targetHauke Mehrtens2019-05-037-4669/+0
| | | | | | | | | | | | This target only supports kernel 3.18, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* au1000: Remove unmaintained targetHauke Mehrtens2019-05-032-52/+0
| | | | | | | | | | | | This target only supports kernel 3.18, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-envtools: fix fw_env.config for ox820/stg-212Daniel Golle2019-04-111-1/+3
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ath79: add support for Netgear EX6400 and EX7300Daniel Gimpelevich2019-04-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is sold as a dual-band 802.11ac range extender. It has a sliding switch for Extender mode or Access Point mode, a WPS button, a recessed Reset button, a hard-power button, and a multitude of LED's, some multiplexed via an NXP 74AHC164D chip. The internal serial header pinout is Vcc, Tx, Rx, GND, with GND closest to the corner of the board. You may connect at 115200 bps, 8 data bits, no parity, 1 stop bit. Specification: - System-On-Chip: QCA9558 - CPU/Speed: 720 MHz - Flash-Chip: Winbond 25Q128FVSG - Flash size: 16 MiB - RAM: 128 MiB - Wireless No1: QCA9558 on-chip 2.4GHz 802.11bgn, 3x3 - Wireless No2: QCA99x0 chip 5GHz 802.11an+ac, 4x4 - PHY: Atheros AR8035-A Installation: If you can get to the stock firmware's firmware upgrade option, just feed it the factory.img and boot as usual. As an alternative, TFTP the factory.img to the bootloader. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> [whitespace fix in DTS and reorder of make variables] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-envtools: imx6: Add support for Toradex Apalis board familyPetr Štetiar2019-04-081-0/+4
| | | | | | | This patch is needed in order to be able to use fw_{set,print}env commands. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-imx6: Add support for Toradex Apalis board familyPetr Štetiar2019-04-082-0/+134
| | | | | | This patch is needed in order to properly boot OpenWrt bootscript. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* fconfig: cleanup MakefileMichael Heimpold2019-04-061-7/+0
| | | | | | | | | | | We do not need to define an empty Build/Configure since the default checks for existing ./configure and does nothing in case nothing is found. Similar for Build/Compile: we can remove the definition when we only call the default. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* uboot-tegra: add U-Boot for tegra boardsTomasz Maciej Nowak2019-04-061-0/+64
| | | | | | | Add U-Boot for NVIDIA Tegra based boards, with the first being CompuLab TrimSlice. This is part of initial support for this board. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* package/uboot-omap: backport patches to fix buildAlexander Couzens2019-03-283-1/+3168
| | | | | | | * 106: fix build when libfdt-devel is installed on host * 107: fix stdbool.h includes Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* uboot-fritz4040: fix PKG_MIRROR_HASHChristian Lamparter2019-03-211-1/+1
| | | | | | | The PKG_MIRROR_HASH was for some reason wrong. Fixes: d75db67870fa ("uboot-fritz4040: bump version to 2019-03-03") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ramips: Xiaomi MIR3G: detect board name from DTSOzgur Can Leonard2019-03-211-1/+1
| | | | | | | | | | | | | | | | - Former "mir3g" board name becomes "xiaomi,mir3g". - Reorder some entries to maintain alphabetical order. - Change DTS so status LEDs (yellow/red/blue) mimic Xiaomi stock firmware: (Section Indicator) <http://files.xiaomi-mi.co.uk/files/router_pro/router%20PRO%20EN.pdf> <http://files.xiaomi-mi.co.uk/files/Mi_WiFi_router_3/MiWiFi_router3_EN.pdf> |Yellow: Update (LED flickering), the launch of the system (steady light); |Blue: during normal operation (steady light); |Red: Safe mode (display flicker), system failure (steady light); Signed-off-by: Ozgur Can Leonard <ozgurcan@gmail.com> [Added link to similar Router 3 model] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* uboot-sunxi: add fix for A20-OLinuXino-Lime2-eMMC rev. K boardsZoltan HERPAI2019-03-131-0/+44
| | | | | | | The OLinuXino Lime2 rev. K boards use new PHYs (Micrel KSZ9031), so enable that. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 08:57:49 +0000