aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* uboot-envtools: ath79: add Netgear WNDR3700v2Michal Cieslakiewicz2020-02-041-1/+2
| | | | | | | | Add Netgear WNDR3700v2 to the list of supported boards. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> [rebase, adjusted commit title] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* rbcfg: make package available for ath79Roger Pueyo Centelles2020-01-231-1/+1
| | | | Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* uboot-envtools: ath79: add support for glinet,gl-ar150Kimmo Vuorinen2020-01-231-0/+3
| | | | | | | | Add ubootenv uci config for GL.inet GL-AR150 Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com> [commit title/message facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-envtools: ar71xx: add support for gl-ar150/-domino/-mifiKimmo Vuorinen2020-01-231-0/+5
| | | | | | | | Add ubootenv uci config for gl-ar150, gl-domino and gl-mifi Signed-off-by: Kimmo Vuorinen <kimmo.vuorinen@gmail.com> [commit message/title facelift] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-oxnas: fix memory leak in tool mkox820crcAndrea Dalla Costa2020-01-151-0/+3
| | | | | | | | In function `main` add calls to `free` for the variable `executable`. This is needed because the variable `executable` is allocated but never freed. This cause a memory leak. Signed-off-by: Andrea Dalla Costa <andrea@dallacosta.me>
* ath79: add support for Netgear WNDR4500 v3Michal Cieslakiewicz2020-01-151-0/+1
| | | | | | | | | | | | | | | | | | | This patch introduces support for Netgear WNDR4500v3. Router is very similar to WNDR4300v2 and is based on the same PCB. Information gathered from various Internet sources (including https://patchwork.ozlabs.org/patch/809227/) shows following differences to WNDR4300v2: * two USB 2.0 ports with separate LEDs * USB LEDs soldered to secondary pads * WPS and RFKILL buttons soldered to secondary pads * described as N900 device with 3x3:3 MIMO for 2.4GHz radio * power supply requirement is DC 12V 2.5A * vendor HW ID suffix differs in one digit * bigger chassis Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ath79: add support for Netgear WNDR4300 v2Michal Cieslakiewicz2020-01-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces support for Netgear WNDR4300v2. Specification ============= * Description: Netgear WNDR4300 v2 * Loader: U-boot * SOC: Qualcomm Atheros QCA9563 (775 MHz) * RAM: 128 MiB * Flash: 2 MiB SPI-NOR + 128 MiB SPI-NAND - NOR: U-boot binary: 256 KiB - NOR: U-boot environment: 64 KiB - NOR: ART Backup: 64 KiB - NOR: Config: 64 KiB - NOR: Traffic Meter: 64 KiB - NOR: POT: 64 KiB - NOR: Reserved: 1408 KiB - NOR: ART: 64 KiB - NAND: Firmware: 25600 KiB (see notes for OpenWrt) - NAND: Language: 2048 KiB - NAND: mtdoops Crash Dump: 128 KiB - NAND: Reserved: 103296 KiB * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8337) * Wireless: - 2.4 GHz b/g/n (internal) - 5 GHz a/n (AR9580) * USB: yes, 1 x USB 2.0 * Buttons: - Reset - WiFi (rfkill) - WPS * LEDs: - Power (amber/green) - WAN (amber/green) - WLAN 2G (green) - WLAN 5G (blue) - 4 x LAN (amber/green) - USB (green) - WPS (green) * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1 * Power supply: DC 12V 1.5A * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2 Important Notes =============== 0. NOR Flash (2 MiB) is not touched by OpenWrt installation. 1. NAND Flash (128 MiB) layout under OpenWrt is changed as follows: all space is split between 4 MiB kernel and 124 MiB UBI areas; vendor partitions (language and mtdoops) are removed; kernel space size can be further expanded if needed; maximum image size is set to 25600k for compatibility reasons and can also be increased. 2. CPU clock is 775 MHz, not 750 MHz. 3. 5 GHz wireless radio chip is Atheros AR9580-AR1A with bogus PCI device ID 0xabcd. For ath9k driver to load successfully, this is overriden in DTS with correct value for this chip, 0x0033. 4. RFKILL button is wired to AR9580 pin 9 which is normally disabled by chip definition in ath9k code (0x0000F4FF gpio mask). Therefore 'qca,gpio-mask=<0xf6ff>' hack must be used for button to work properly. 5. USB port is always on, no GPIO for 5V power control has been identified. Installation ============ * TFTP recovery * TFTP via U-boot prompt * sysupgrade * Web interface Test build configuration ======================== CONFIG_TARGET_ath79=y CONFIG_TARGET_ath79_nand=y CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr4300-v2=y CONFIG_ALL_KMODS=y CONFIG_DEVEL=y CONFIG_CCACHE=y CONFIG_COLLECT_KERNEL_DEBUG=y CONFIG_IMAGEOPT=y Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ixp4xx: remove unmaintained targetAdrian Schmutzler2020-01-087-193/+0
| | | | | | | | | | | This target is still on kernel 4.9, and it looks like there is no active maintainer for this target anymore. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: Remove self from MAINTAINER entriesFlorian Fainelli2019-12-231-1/+0
| | | | Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* uboot-envtools: ath79: fix missing etactica eg200 supportKarl Palsson2019-12-191-0/+1
| | | | | | | | | | Was inadvertantly missed from the inital forward port from ar71xx to ath79. Fixes: 1588114cf2a3 ("ath79: add etactica-eg200 support") Signed-off-by: Karl Palsson <karlp@etactica.com> [commit description/subject facelift] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* uboot-envtools: check for config prior to appendImran Khan2019-12-172-2/+2
| | | | | | | | | | | | | In the rare event a pre-populated fw_env.config exists in the rootfs prior to firstboot, calling fw_setenv after the system has initialised will annihilate the devices environment due to two identical lines in fw_env.config. Check for existence prior to blind appendage. Signed-off-by: Imran Khan <gururug@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: fixed patch format, improved grep, cosmetics]
* sunxi: add support for FriendlyARM Nano PI NEO Air dev boardRoman Bazalevsky2019-12-131-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: Allwinner H3 upto 1.2GHz 512MB DDR3 RAM 8GB on-board eMMC - mountable, can be used as boot with custom boot.scr microSD-card slot WiFi 802.11n (AP6212A) - working Bluetooth (AP6212A) - not working for now Micro-USB OTG + 2*USB headers UART 3.3V - working GPIO/I2C/SPI 2.54mm headers Standard sunxi SD-card installation procedure - copy image to SD card, insert in into slot and boot. First time you will need UART adapter to enable on-board wireless (or just build custom image with enabled WiFi). To boot from eMMC: - boot from SD - copy SD image to emmc (dd bs=... if=.... of=/dev/mmcblk2) - mount eMMC boot partition and replace boot script on it - unmount, reboot To use i2c, spi and more uarts - replace dtb on boot partition with fixed one (use dtc or fdt-tools). Signed-off-by: Roman Bazalevsky <rvb@rvb.name> [rebase onto device name consolidation patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* sunxi: use vendor_device scheme for device definitionsAdrian Schmutzler2019-12-131-34/+34
| | | | | | | | | | | | This changes device definition to resemble the vendor_device scheme already present for the majority of device compatible strings. By doing this, we achieve several advantages at once: - Image names and node names are more consistent with other targets. - SUPPORTED_DEVICES can be set automatically for all but two cases. - Image names and node names are in line with DEVICE_TITLEs. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-envtools: ath79: add support for YunCore XD4200 and A782Piotr Dymacz2019-11-251-1/+3
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-mvebu: add uDPU boardVladimir Vid2019-11-212-2/+22
| | | | | | | | | | * add u-boot support for uDPU * add line to copy u-boot binary to STAGING_DIR_IMAGE, this can later be used as BL33 variable required for ATF build * add patch to increase max gunzip size in mvebu_armada-37xx.h which is required for booting the itb recovery images Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* packages/boot: add arm-trusted-firmware-mvebu and initial uDPU supportVladimir Vid2019-11-211-0/+112
| | | | | | | | | | | | | | | | | ATF mvebu is required for building a functional bootloader for A7K/A8K and A37xx platforms. uDPU device is added as the first target. A3700 platform has a wide range of settings which can be used per device, so options are defined under the Device sections. Platform also required WTP (recovery) tools and mv-ddr package for the DDR topology configuration. 32-bit cross compiler is used for building the WTMI image. After the build, flash-image.bin can be used with the bubt command from the u-boot shell to flash the new version of u-boot. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* omap: support booting off different mmc devicesAndre Heider2019-11-201-3/+7
| | | | | | Tested with installing to/sysupgrading from sd and emmc on boneblack. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: switch from uEnv.txt to generic distro bootingAndre Heider2019-11-203-10/+7
| | | | | | Which makes supporting different boot devices easy. Signed-off-by: Andre Heider <a.heider@gmail.com>
* omap: update uboot to 2019.10Andre Heider2019-11-208-3592/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All patches have been dropped, they're either redundant (e.g. due to the new and unset CONFIG_SPL_FAT_WRITE), break compilation (thumb hacks) or have been applied upstream. The defconfig for am335x_boneblack has been removed upstream [0], so use am335x_evm for boneblack too. Size changes (before, after, file): ti_am335x-evm and ti_am335x-bone-black: 79804 110832 MLO 623836 756148 u-boot.img ti_omap3-beagle: 54148 57708 MLO 496272 665728 u-boot.img ti_omap4-panda: 39356 40204 MLO 284648 366672 u-boot.img Tested on boneblack, which has the biggest spl size increase. The beagle and panda spl sizes seem reasonable to not break booting. [0] https://gitlab.denx.de/u-boot/u-boot/commit/8fa7f65dd02c176ee6021eaf40114560b8954ba2 Signed-off-by: Andre Heider <a.heider@gmail.com>
* ath79: add support for Netgear WNDR3700v4Paul Blazejowski2019-11-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds ath79 support for Netgear WNDR3700v4. Router was previously supported by ar71xx target only. Note: device requires 'ar934x-nand' driver in kernel. Specification ============= * Description: Netgear WNDR3700v4 * Loader: U-boot * SOC: Atheros AR9344 (560 MHz) * RAM: 128 MiB * Flash: 128 MiB (NAND) - U-boot binary: 256 KiB - U-boot environment: 256 KiB - ART: 256 KiB - POT: 512 KiB - Language: 2 MiB - Config: 512 KiB - Traffic Meter: 3 MiB - Firmware: 25 MiB - ART Backup: 256 KiB - Reserved: 96 MiB * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8327) * Wireless: - 2.4 GHz b/g/n (internal) - 5 GHz a/n (AR9580) * USB: yes, 1 x USB 2.0 * Buttons: - Reset - WiFi (rfkill) - WPS * LEDs: - Power (amber/green) - WAN (amber/green) - WLAN 2G (green) - WLAN 5G (blue) - 4 x LAN (amber/green) - USB (green) - WPS (amber/green) * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1 * Power supply: DC 12V 2.5A * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2 Installation ============ * TFTP recovery * TFTP via U-boot prompt * sysupgrade * Web interface Note about partitioning: firmware partition offset (0x6c0000) is hardcoded into vendor's u-boot, so this partition cannot be moved and resized to include Netgear-specific flash areas (pot, language, config, traffic_meter) not used by OpenWrt. Test build configuration ======================== CONFIG_TARGET_ath79=y CONFIG_TARGET_ath79_nand=y CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr3700-v4=y CONFIG_ALL_KMODS=y CONFIG_DEVEL=y CONFIG_CCACHE=y CONFIG_COLLECT_KERNEL_DEBUG=y CONFIG_IMAGEOPT=y Signed-off-by: Paul Blazejowski <paulb@blazebox.homeip.net>
* ath79: GL-AR750S: provide NAND support; increase kernel to 4 MBJeff Kletsky2019-11-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GL.iNet GL-AR750S has been supported by the ar71xx and ath79 platforms with access to its 16 MB NOR flash, but not its 128 MB SPI NAND flash. This commit provides support for the NAND through the upstream SPI-NAND framework. At this time, the OEM U-Boot appears to only support loading the kernel from NOR. This configuration is preserved as this time, with the glinet,gl-ar750s-nand name reserved for a potential, future, NAND-only boot. The family of GL-AR750S devices on the ath79 platform now includes: * glinet,gl-ar750m-nor-nand "nand" target * glinet,gl-ar750m-nor "nand" target (NAND-aware) NB: This commit increases the kernel size from 2 MB to 4 MB "Force-less" sysupgrade is presently supported from the current versions of following NOR-based firmwre images to the version of glinet,gl-ar750s-nor firmware produced by this commit: * glinet,gl-ar750s -- OpenWrt 19.07 ar71xx * glinet,gl-ar750s -- OpenWrt 19.07 ath79 Users who have sucessfully upgraded to glinet,gl-ar750m-nor may then flash glinet,gl-ar750m-nor-nand with sysupgrade to transtion to the NAND-based variant. Other upgrades to these images, including directly to the NAND-based glinet,gl-ar750s-nor-nand firmware, can be accomplished through U-Boot. NB: See "ath79: restrict GL-AR750S kernel build-size to 2 MB" which enables flashing of NAND factory.img with the current GL-iNet U-Boot, "U-Boot 1.1.4-gcf378d80-dirty (Aug 16 2018 - 07:51:15)" The GL-AR750S OEM U-Boot allows upload and flashing of either NOR firmware (sysupgrade.bin) or NAND firmware (factory.img) through its HTTP-based GUI. Serial connectivity is not required. The glinet,gl-ar750s-nor and glinet,gl-ar750s-nor-nand images generated after this commit flash each other directly. This commit changes the control of the USB VBUS to gpio-hog from regulator-fixed introduced by commit 0f6b944c92. This reduces the compressed kernel size by ~14 kB, with no apparent loss of functionality. No other ath79-nand boards are using regulator-fixed at this time. Note: mtd_get_mac_binary art 0x5006 does not return the proper MAC and the GL.iNet source indicates that only the 0x0 offset is valid The ar71xx targets are unmodified. Cc: Alexander Wördekemper <alexwoerde@web.de> Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
* ath79: add GL.iNet GL-AR300M16 as NOR-only boardJeff Kletsky2019-11-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GL.iNet GL-AR300M series of devices includes variants without NAND and only the 16 MB NOR flash. These include the GL-AR300M16 and the GL-AR300M-Lite (already with its own board name). This board-name addition provides disambiguation from the NAND-bearing GL-AR300M devices, both for OpenWrt code and for end users. Kernel and firmware support for NAND and UBI will add ~320 kB to the overall firmware size at this time. This NOR-only option continues to provide more compact firmware for both the GL-AR300M16 as well as those who wish to use it as an alternate or primary, NOR-resident firmware on the GL-AR300M. The ar71xx targets are unmodified. Installation ------------ Install through OEM U-Boot (HTTP-based) or `sysupgrade --force` when booted from NOR and running OEM or OpenWrt, NOR-based firmware. As one of the intentions is disambiguation from NAND-bearing units, users who have flashed this firmware onto a device with NAND would need to use U-Boot or `sysupgrade --force` to flash firmware that again supports NAND. There are no additional SUPPORTED_DEVICES as it is not possible to determine if a device does or does not have NAND based on either the OEM's or OpenWrt's board names prior to this patch. Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
* uboot-envtools: ramips: add support for ALFA Network Quad-E4GPiotr Dymacz2019-11-141-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: ramips: add support for ALFA Network R36M-E4GPiotr Dymacz2019-11-131-0/+1
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* uboot-envtools: Add TARGET_LDFLAGS to fix PIE and RELROHauke Mehrtens2019-11-092-11/+9
| | | | | | | | | Forward the OpenWrt TARGET_LDFLAGS to the linker of the fw_printenv tool. In addition also use the more standard make invocation script. With this change the fw_printenv tool is built with PIE and Full RELRO support when activated globally in OpenWrt. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* uboot-mxs: bump to v2019.10Michael Heimpold2019-11-092-9/+11
| | | | | | | | Also update the U-Boot BSP patch for I2SE Duckbill devices. Run tested on I2SE Duckbill and Olimex OLinuXino Maxi boards. Signed-off-by: Michael Heimpold <mhei@heimpold.de>
* ar71xx: update uboot-envtools for Netgear WNR routersMichal Cieslakiewicz2019-11-081-1/+10
| | | | | | | Boards added: WNR1000v2, WNR2000v3, WNR2200, WNR612v2, WNDR4300. Boards changed: WNDR3700 (u-boot env size is 2 sectors not 1). Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ath79: update uboot-envtools for Netgear WNR routersMichal Cieslakiewicz2019-11-081-0/+6
| | | | | | Boards added: WNR1000v2, WNR2000v3, WNR612v2, WNDR3700. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ath79: add support for Netgear WNDR4300Michal Cieslakiewicz2019-11-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds ath79 support for Netgear WNDR4300. Router was previously supported by ar71xx target only. Note: device requires 'ar934x-nand' driver in kernel. Specification ============= * Description: Netgear WNDR4300 * Loader: U-boot * SOC: Atheros AR9344 (560 MHz) * RAM: 128 MiB * Flash: 128 MiB (NAND) - U-boot binary: 256 KiB - U-boot environment: 256 KiB - ART: 256 KiB - POT: 512 KiB - Language: 2 MiB - Config: 512 KiB - Traffic Meter: 3 MiB - Firmware: 25 MiB - ART Backup: 256 KiB - Reserved: 96 MiB * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) (AR8327) * Wireless: - 2.4 GHz b/g/n (internal) - 5 GHz a/n (AR9580) * USB: yes, 1 x USB 2.0 * Buttons: - Reset - WiFi (rfkill) - WPS * LEDs: - Power (amber/green) - WAN (amber/green) - WLAN 2G (green) - WLAN 5G (blue) - 4 x LAN (amber/green) - USB (green) - WPS (amber/green) * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1 * Power supply: DC 12V 2.5A * MAC addresses: LAN=WLAN2G on case label, WAN +1, WLAN5G +2 Installation ============ * TFTP recovery * TFTP via U-boot prompt * sysupgrade * Web interface Note about partitioning: firmware partition offset (0x6c0000) is hardcoded into vendor's u-boot, so this partition cannot be moved and resized to include Netgear-specific flash areas (pot, language, config, traffic_meter) not used by OpenWrt. Test build configuration ======================== CONFIG_TARGET_ath79=y CONFIG_TARGET_ath79_nand=y CONFIG_TARGET_ath79_nand_DEVICE_netgear_wndr4300=y CONFIG_ALL_KMODS=y CONFIG_DEVEL=y CONFIG_CCACHE=y CONFIG_COLLECT_KERNEL_DEBUG=y CONFIG_IMAGEOPT=y Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* uboot-mvebu: add support for Macronix mx25u12835f flashVladimir Vid2019-11-011-0/+10
| | | | | | Some of A3700 boards use mx25u12835f, specifically uDPU and ESPRESSObin v7. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* ath79: add support for Netgear WNR2200Michal Cieslakiewicz2019-11-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds ath79 support for Netgear WNR2200. Router was previously supported by ar71xx target only (8 MiB variant). Netgear WNR2200 has two flash versions - 8MiB sold in EU, US etc. and 16 MiB for Russia and China markets. Apart from flash size both variants share the same hardware specification. Specification ============= * Description: Netgear WNR2200 * Loader: U-boot * SOC: Atheros AR7241 (360 MHz) * RAM: 64 MiB * Flash: 8 MiB or 16 MiB (SPI NOR) - U-boot binary: 256 KiB - U-boot environment: 64 KiB - Firmware: 7808 KiB or 16000 KiB - ART: 64 KiB * Ethernet: 4 x 10/100 LAN + 1 x 10/100 WAN * Wireless: 2.4 GHz b/g/n (Atheros AR9287) * USB: yes, 1 x USB 2.0 * Buttons: - Reset - WiFi (rfkill) - WPS * LEDs: - Power (amber/green) - WAN (amber/green) - WLAN (blue) - 4 x LAN (amber/green) - WPS (green) * UART: 4-pin connector JP1, 3.3V (Vcc, TX, RX, GND), 115200 8N1 * Power supply: DC 12V 1.5A * MAC addresses: LAN on case label, WAN +1, WLAN +2 Installation ============ * TFTP recovery * TFTP via U-boot prompt * sysupgrade * Web interface Test build configuration ======================== CONFIG_TARGET_ath79=y CONFIG_TARGET_ath79_generic=y CONFIG_TARGET_ath79_generic_DEVICE_netgear_wnr2200-8m=y CONFIG_ALL_KMODS=y CONFIG_DEVEL=y CONFIG_CCACHE=y CONFIG_COLLECT_KERNEL_DEBUG=y CONFIG_IMAGEOPT=y CONFIG_KERNEL_DEBUG_INFO=y CONFIG_KERNEL_DEBUG_KERNEL=y Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
* ath79: uboot-envtools: Add GL-AR300M-LiteJeff Kletsky2019-10-241-0/+1
| | | | | | Add the GL.iNet GL-AR300M-Lite to the list of supported boards. Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
* ipq40xx: add support for AVM FRITZ!Repeater 1200David Bauer2019-10-231-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SoC: Qualcomm IPQ4019 RAM: 256M DDR3 FLASH: 128M NAND WiFi: 2T2R IPQ4019 bgn 2T2R IPQ4019 a/n/ac ETH: Atheros AR8033 RGMII PHY BTN: 1x Connect (WPS) LED: Power (green/red/yellow) Installation ------------ 1. Grab the uboot for the Device from the 'u-boot-fritz1200' subdirectory. Place it in the same directory as the 'eva_ramboot.py' script. It is located in the 'scripts/flashing' subdirectory of the OpenWRT tree. 2. Assign yourself the IP address 192.168.178.10/24. Connect your Computer to one of the boxes LAN ports. 3. Connect Power to the Box. As soon as the LAN port of your computer shows link, load the U-Boot to the box using following command. > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin 4. The U-Boot will now start. Now assign yourself the IP address 192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP server root directory and rename it to 'FRITZ1200.bin'. 5. The Box will now boot OpenWRT from RAM. This can take up to two minutes. 6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using scp. SSH into the Box and first write the Bootloader to both previous kernel partitions. > mtd write /path/to/uboot-fritz1200.bin uboot0 > mtd write /path/to/uboot-fritz1200.bin uboot1 7. Remove the AVM filesystem partitions to make room for our kernel + rootfs + overlayfs. > ubirmvol /dev/ubi0 --name=avm_filesys_0 > ubirmvol /dev/ubi0 --name=avm_filesys_1 8. Flash OpenWRT peristently using sysupgrade. > sysupgrade -n /path/to/openwrt-sysupgrade.bin Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-fritz4040: update to latest HEADDavid Bauer2019-10-231-3/+3
| | | | | | | | f92be9d add support for AVM FRITZ!Repeater 1200 d651302 enable support for Atheros AR8033 PHY e4c857c add machtype override hack Signed-off-by: David Bauer <mail@david-bauer.net>
* uboot-envtools: remove erasesize from MMC configTim Harvey2019-10-211-2/+2
| | | | | | | Erasesize doesn't belong in the u-boot env config for block devices as it is known to be 512 byte aligned. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* uboot-oxnas: remove unnecessary execute permission bitSungbo Eo2019-10-121-0/+0
| | | | | | .c files do not need to be executable. 644 is enough. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* grub2: fix a build regression on non-linux systemsFelix Fietkau2019-10-021-0/+31
| | | | | | Merge an upstream commit to correct a missing rename in generic code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-fritz4040: update to 2019-09-07David Bauer2019-09-251-3/+3
| | | | | | | | | | | | | 572ff7f fritzcreator: actually add checksum spacer 6edce1a fritzcreator: replace obscure padding generation with something more portable 2ff189f add ASUS RT-AC58U "easy install" factory u-boot shim b91f9c2 readd spi-nand support 486ae53 improve cmd_sysupgrade b0933f1 replace sstrip with strip 882e48a do not include generated files into git 0c5aa5f fix bugs in ipq40xx_cdp.c Signed-off-by: David Bauer <mail@david-bauer.net>
* sunxi: Add support for Banana Pi M2 UltraHal Martin2019-09-212-0/+32
| | | | | | | | | | | | | | | | | | CPU: Allwinner R40 Quad-Core Cortex-A7 @ 1.2GHz GPU: Mali 400 MP2 Memory: 2GB DDR3 onboard (shared with GPU) Onboard: Storage microSD card slot Onboard: Storage 8GB eMMC Onboard: Network 10/100/1000M Ethernet RJ45 Onboard: Network WiFi 802.11b/g/n 1x1 (AMPAK AP6212; brcmfmac) Onboard header: SPI, I2C, GPIO, UART USB: Two USB 2.0 Host, One USB 2.0 OTG Known issues: - WiFi doesn't work - eMMC not supported Signed-off-by: Hal Martin <hal.martin@gmail.com>
* uboot-fritz4040: build with ipq40xx "generic" subtargetYousong Zhou2019-09-061-0/+1
| | | | | | Fixes: 853e4dd3 ("ipqx0xx: add Generic subtarget") Ref: https://forum.openwrt.org/t/ipq40xx-snapshot-not-updated-since-22nd-august/44126 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* uboot-envtools: Update to U-Boot version 2019.07Hauke Mehrtens2019-09-042-7/+7
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* grub2: bump to 2.04Tomasz Maciej Nowak2019-09-017-187/+11
| | | | | | | | | | | | | | | | | | | | | * GCC 8 and 9 support. * Gnulib integration overhaul. * RISC-V support. * Xen PVH support. * Native UEFI secure boot support. * UEFI TPM driver. * New IEEE 1275 obdisk driver. * Btrfs RAID 5 and RIAD 6 support. * bootin from F2FS support. * PARTUUID support. * VLAN support. * Native DHCP support. * Many ARM and ARM64 fixes. * Many SPARC fixes. * Many IEEE 1275 fixes. * ...and tons of other fixes and cleanups... Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* uboot-zynq: update to 2019.07Luis Araneda2019-09-015-569/+28
| | | | Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* mvebu: uDPU: add sysupgrade supportVladimir Vid2019-08-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds sysupgrade, uboot-env and networking support for Methode uDPU device. Device features 4 partitions: ----------------------------------------- | boot | recovery | rootfs | misc | | (ext4) | (ext4) | (fsf2) | (f2fs) | _________________________________________ Idea was to use f2fs only but the u-boot currently lacks support so first 2 partition are ext4 to be u-boot readable, and this was a reason why custom build and sysupgrade sections were required. On the sysupgrade, boot and rootfs partitions are updated, firmare image and user configuration is saved on the misc partition and if the upgrade was successfull, recovery partition will be updated on after the reboot from preinit script. If the sysupgrade fails for any reason, device will fallback to recovery initramfs image. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfigSandeep Sheriker M2019-08-171-3/+3
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91bootstrap: add support for at91sam9x5ekSandeep Sheriker M2019-08-171-0/+14
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* at91bootstrap: bump v3.8.10 to v3.8.12Sandeep Sheriker M2019-08-171-3/+2
| | | | Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: fix -Wformat-securitySandeep Sheriker M2019-08-172-1/+14
| | | | | | add patch to fix -Wformat-security warnings. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: changed som1 ek default defconfigsSandeep Sheriker M2019-08-171-5/+5
| | | | | | | replaced som1 ek spi flash with qspi defconfig and mmc with mmc1 defconfig. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
* uboot-at91: add at91sam9x5ek socSandeep Sheriker M2019-08-171-0/+9
| | | | | | add support to build u-boot binaries for at91sam9x5ek socs. Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>