aboutsummaryrefslogtreecommitdiffstats
path: root/package/firmware
Commit message (Collapse)AuthorAgeFilesLines
...
* layerscape: define only one package for fman-ucodeYangbo Lu2020-05-071-20/+8
| | | | | | | | | We do not have to define package for each board, and consider variant's installing. It is easier to maintain fman-ucode with only one package installing all two binaries as intermediate files. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: update ls-rcw to latest LSDK-20.04Yangbo Lu2020-05-074-551/+38
| | | | | | | | Update ls-rcw to latest LSDK-20.04. Update patch 0001 with a new one. Drop patch 0002 since it had been integrated. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* layerscape: define only one package for ls-rcwYangbo Lu2020-05-071-78/+26
| | | | | | | | | | We do not have to define package for each board, and consider variant's building/installing. It is easier to maintain ls-rcw with only one package installing all boards RCW binaries as intermediate files, each of which is just about hundreds of bytes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
* wireless-regdb: bump to latest release 2020-04-29Petr Štetiar2020-04-305-994/+2
| | | | | | Update to latest release. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath10k-ct-firmware: add htt-mgt variantsÁlvaro Fernández Rojas2020-04-281-1/+154
| | | | | | | | | | | For wave-2, there is now a new variant: htt-mgt-community (vs the old full-htt-mgt-community). The non-full one (hence forth 'diet') compiles out a lot of firmware features that ath10k does not use. This saves a lot of resources and lets one configure more stations/vdevs/etc using fwcfg. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct-firmware: update firmware imagesÁlvaro Fernández Rojas2020-04-281-26/+26
| | | | | | No release notes this time. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct-firmware: rename ct-htt packagesÁlvaro Fernández Rojas2020-04-281-65/+65
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-firmware: move CT firmwares to new packageÁlvaro Fernández Rojas2020-04-282-446/+524
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* wireless-regdb: backport three upstream fixesPetr Štetiar2020-04-284-0/+935
| | | | | | | | Another release is overdue for quite some time, so I'm backporting three fixes from upstream which I plan to backport into 19.07 as well. Ref: FS#2880 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* cypress-firmware: update to v5.4.18-2020_0402Álvaro Fernández Rojas2020-04-131-3/+21
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ipq40xx: add support for Cell C RTL30VWPawel Dembicki2020-04-102-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cell C RTL30VW is a LTE router with tho gigabit ethernets and integrated QMI mPCIE modem. This is stripped version of ASKEY RTL0030VW. Hardware: Specification: -CPU: IPQ4019 -RAM: 256MB -Flash: NAND 128MB + NOR 16MB -WiFi: Integrated bgn/ac -LTE: mPCIe card (Modem chipset MDM9230) -LAN: 2 Gigabit Ports -USB: 2x USB2.0 -Serial console: RJ-45 115200 8n1 -Unsupported VoIP Known issues: None so far. Instruction install: There are two methods: Factory web-gui and serial + tftp. Web-gui: 1. Apply factory image via stock web-gui. Serial + initramfs: 1. Rename OpenWrt initramfs image to "image" 2. Connect serial console (115200,8n1) 3. Set IP to different than 192.168.1.11, but 24 bit mask, eg. 192.168.1.4. 4. U-Boot commands: sf probe && sf read 0x80000000 0x180000 0x10000 setenv serverip 192.168.1.4 set fdt_high 0x85000000 tftpboot 0x84000000 image bootm 0x84000000 5. Install sysupgrade image via "sysupgrade -n" Back to stock: All is needed is swap 0x4c byte in mtd8 from 0 to 1 or 1 to 0, do firstboot and factory reset with OFW: 1. read mtd8: dd if=/dev/mtd8 of=/tmp/mtd8 2. go to tmp: cd /tmp/ 3. write first part of partition: dd if=mtd8 of=mtd8.new bs=1 count=76 4. check which layout uses bootloader: cat /proc/mtd 5a. If first are kernel_1 and rootfs_1 write 0: echo -n -e '\x00' >> mtd8.new 5b. If first are kernel and rootfs write 1: echo -n -e '\x01' >> mtd8.new 6. fill with rest of data: dd if=mtd8 bs=1 skip=77 >> mtd8.new 7. CHECK IF mtd8.new HAVE CHANGED ONLY ONE BYTE! e.g with: hexdump mtd8.new 8. write new mtd8 to flash: mtd write mtd8.new /dev/mtd8 9. do firstboot 10.reboot 11. Do back to factory defaults in OFW GUI. Based on work: Cezary Jackiewicz <cezary@eko.one.pl> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* ipq40xx: add support for MobiPromo CM520-79FDENG Qingfang2020-04-102-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MobiPromo CM520-79F is an AC1300 dual band router based on IPQ4019 Specification: SoC/Wireless: QCA IPQ4019 RAM: 512MiB Flash: 128MiB SLC NAND Ethernet PHY: QCA8075 Ethernet ports: 1x WAN, 2x LAN LEDs: 7 LEDs 2 (USB, CAN) are GPIO other 5 (2.4G, 5G, LAN1, LAN2, WAN) are connected to a shift register Button: Reset Flash instruction: Disassemble the router, connect UART pins like this: GND TX RX [x x . . x .] [. . . . . .] (QCA8075 and IPQ4019 below) Baud-rate: 115200 Set up TFTP server: IP 192.168.1.188/24 Power on the router and interrupt the booting with UART console env backup (in case you want to go back to stock and need it there): printenv (Copy the output to somewhere save) Set bootenv: setenv set_ubi 'set mtdids nand0=nand0; set mtdparts mtdparts=nand0:0x7480000@0xb80000(fs); ubi part fs' setenv bootkernel 'ubi read 0x84000000 kernel; bootm 0x84000000#config@1' setenv cm520_boot 'run set_ubi; run bootkernel' setenv bootcmd 'run cm520_boot' setenv bootargs saveenv Boot initramfs from TFTP: tftpboot openwrt-ipq40xx-generic-mobipromo_cm520-79f-initramfs-fit-zImage.itb bootm After initramfs image is booted, backup rootfs partition in case of reverting to stock image cat /dev/mtd12 > /tmp/mtd12.bin Then fetch it via SCP Upload nand-factory.ubi to /tmp via SCP, then run mtd erase rootfs mtd write /tmp/*nand-factory.ubi rootfs reboot To revert to stock image, restore default bootenv in uboot UART console setenv bootcmd 'bootipq' printenv use the saved dump you did back when you installed OpenWrt to verify that there are no other differences from back in the day. saveenv upload the backed up mtd12.bin and run tftpboot mtd12.bin nand erase 0xb80000 0x7480000 nand write 0x84000000 0xb80000 0x7480000 The BOOTCONFIG may have been configured to boot from alternate partition (rootfs_1) instead In case of this, set it back to rootfs: cd /tmp cat /dev/mtd7 > mtd7.bin echo -ne '\x0b' | dd of=mtd7.bin conv=notrunc bs=1 count=1 seek=4 for i in 28 48 68 108; do dd if=/dev/zero of=mtd7.bin conv=notrunc bs=1 count=1 seek=$i done mtd write mtd7.bin BOOTCONFIG mtd write mtd7.bin BOOTCONFIG1 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [renamed volume to ubi to support autoboot, as per David Lam's test in PR#2432] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: add firmware for RTL8723BS SDIO modulesPetr Štetiar2020-03-281-0/+7
| | | | | | | Adds firmware package for Realtek RTL8723BS SDIO Wireless LAN NIC driver available in the staging. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath10k-firmware: update ath10k-ct firmware imagesÁlvaro Fernández Rojas2020-03-271-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Release notes for 017: Wave-1: * March 19, 2020: Fix problem where power-save was not enabled when going off-channel to scan. The problem was a boolean logic inversion in the chmgr code, a regression I introduced a long time ago. * March 19, 2020: When scanning only on current working channel, do not bother with disable/enable powersave. This should make an on-channel scan less obtrusive than it was previously. * March 23, 2020: Fix channel-mgr use-after-free problem that caused crashes in some cases. The crash was exacerbated by recent power-save changes. * March 23, 2020: Fix station-mode power-save related crash: backported the fix from 10.2 QCA firmware. * March 23, 2020: Attempt to better clean up power-save objects and state, especially in station mode. Release notes for 016: Wave-1 changes, some debugging code for a crash someone reported, plus: * February 28, 2020: Fix custom-tx path when sending in 0x0 for rate-code. Have tries == 0 mean one try but NO-ACK (similar to how wave-2 does it). wave-2: * Fixed some long-ago regressions related to powersave and/or multicast. Maybe fix some additional multicast and/or tx-scheduling bugs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Petr Štetiar <ynezz@true.cz>
* layerscape: resurrect support for FRDM-LS1012ATomasz Maciej Nowak2020-03-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the rest boards supported by LSDK. 0x000000000000-0x000000100000 : "bl2" 0x000000100000-0x000000500000 : "fip" 0x000000500000-0x000000600000 : "u-boot-env" 0x000000600000-0x000000a00000 : "reserved-1" 0x000000a00000-0x000000d00000 : "pfe" 0x000000d00000-0x000000f00000 : "reserved-2" 0x000000f00000-0x000001000000 : "dtb" 0x000001000000-0x000002000000 : "kernel" 0x000002000000-0x000004000000 : "ubifs" Specification SoC: LS1012A single core 800MHz RAM: 512 MB DDR3 Flash: 64 MB QSPI NOR Ethernet: 2x 10/100/1000 Mbps Connectors: µUSB 3.0 OTG µUSB 2.0 (debugging & power input) 2x 3.5mm jack for microphone & headphone (SGTL5000) Arduino Shield expansion with I2C, SPI, UART, and GPIO JTAG LEDS: 3x (non-configurable) Buttons: 1x (reset, non-configurable) Be advised that erasing or writing 64MB flash takes some time to finish. Do not reset the board until all operations end with success, otherwise You'll need external tools to re-program the flash chip. Installation Follow the QSPI programing procedure for LS1012AFRWY board in target/linux/layerscape/README, point 3.3. Don't forget about updating U-Boot environment with MAC addresses of ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1. As the LSDK images do not support sysupgrade, nor do changes in this commit, it's planed in upcoming submissions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* ipq40xx: add support for 8devices Habanero DVKRobert Marko2020-03-092-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the 8devices Habanero development board. Specs are: CPU: QCA IPQ4019 RAM: DDR3L 512MB Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship with it and some without) WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2 WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2 Ethernet: 5x Gbit LAN (QCA 8075) USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019) MicroSD slot (Uses SD controller built into IPQ4019) SDIO3.0/EMMC slot (Uses the same SD controller) Mini PCI-E Gen 2.0 slot (Built into IPQ4019) 5x LEDs (4 GPIO controllable) 2x Pushbutton (1 is connected to GPIO, other to SoC reset) LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no driver support) 1x UART 115200 rate on J18 2x breakout development headers 12V DC Jack for power DIP switch for bootstrap configuration Installation instructions: Since boards ship with vendors fork of OpenWrt sysupgrade can be used. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ipq40xx: add support for EnGenius EAP2200Steven Lin2020-02-283-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SOC: IPQ4019 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB FLASH: NOR 4 MiB + NAND 128 MiB ETH: Qualcomm Atheros QCA8072 WLAN1: Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4019 5GHz 802.11a/n/ac 2:2x2 WLAN2: Qualcomm Atheros QCA9888 5GHz 802.11a/n/ac 2:2x2 INPUT: WPS Button LEDS: Power, LAN1, LAN2, WLAN 2.4GHz, WLAN 5GHz-1, WLAN 5GHz-2, OPMODE 1. Load Ramdisk via U-Boot To set up the flash memory environment, do the following: a. As a preliminary step, ensure that the board console port is connected to the PC using these RS232 parameters: * 115200bps * 8N1 b. Confirm that the PC is connected to the board using one of the Ethernet ports. c. Set a static ip 192.168.99.8 for Ethernet that connects to board. d. The PC must have a TFTP server launched and listening on the interface to which the board is connected. e. At this stage power up the board and, after a few seconds, press 4 and then any key during the countdown. U-BOOT> set serverip 192.168.99.9 && tftpboot 0x84000000 192.168.99.8:openwrt.itb && bootm Signed-off-by: Steven Lin <steven.lin@senao.com> [copied 4.19 dts to 5.4] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: update to 20200122DENG Qingfang2020-02-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update linux-firmware to 20200122 git log --pretty=oneline --abbrev-commit 20191215..20200122 1eb2408 linux-firmware: Update firmware file for Intel Bluetooth AX200 0dc1611 linux-firmware: Update firmware file for Intel Bluetooth AX201 d03f79c linux-firmware: Update firmware file for Intel Bluetooth 9560 aab62bc linux-firmware: Update firmware file for Intel Bluetooth 9260 ed0aa3a nvidia: add TU102/TU104/TU106 signed firmware 9c340bd amdgpu: update navi10 firmware for 19.50 3b4a503 amdgpu: Add navi10 TA ucode 16cc13a Merge branch 'v1.1.3' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.37f3177d mediatek: update MT8173 VPU firmware to v1.1.3 67d4ff5 Mellanox: Add new mlxsw_spectrum firmware xx.2000.2714 f1c9e7b radeon: update oland rlc microcode from amdgpu b1dafb7 amdgpu: update vega20 microcode for 19.50 c38789e amdgpu: update vega12 microcode for 19.50 5a141c1 amdgpu: update vega10 microcode for 19.50 a03173a amdgpu: update picasso microcode for 19.50 86e9a5f amdgpu: update raven2 microcode for 19.50 febe09a amdgpu: update raven microcode for 19.50 af76fd0 amdgpu: update navi10 microcode for 19.50 b5b176a amdgpu: update navi14 microcode for 19.50 ad90178 amdgpu: add TA microcode for Raven asics 379551b qed: Add firmware 8.42.2.0 58b4003 Merge branch 'RB3-wlan-firmware-1387-v2' of https://github.com/andersson/linux-firmware 5967a45 Adjust WHENCE entry to check_whence doesn't complain d1e743d Merge branch 'master' of https://github.com/NXP/mwifiex-firmware d6219ab qcom: Switch SDM845 WLAN firmware e65245c linux-firmware: add NXP firmware licence file 6871bff Merge branch 'ath10k-20191220' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware b142c2e ath10k: WCN3990 hw1.0: add firmware WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 8809b87 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00070 513d70c ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00047 203435b ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00070 a66d2fc ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00047 6d19154 ath10k: QCA6174 hw3.0: update board-2.bin c4586ff linux-firmware: Update AMD cpu microcode Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
* brcm2708: rename target to bcm27xxAdrian Schmutzler2020-02-141-4/+4
| | | | | | | | | | | | | | | | | This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-firmware: update ath10k-ct firmwareMichael Yartys2020-02-131-24/+24
| | | | | | | | | | | | | | This supports better per-chain noise floor reporting, which in turn allows for better RSSI reporting in the driver. Wave-2 fixes a long-standing rate-ctrl problem when connected to xbox (and probably other devices). Wave-2 has fix for crash likely related to rekeying. Wave-1 has some debugging code added where a user reported a crash. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq806x+qca9984,ipq4019+qca9986] Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
* cypress-firmware: update to v4.14.77-2020_0115Álvaro Fernández Rojas2020-02-011-4/+58
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ipq-wifi: drop deprecated .bin supportChristian Lamparter2020-01-263-4/+1
| | | | | | | | | | This patch converts the Qxwlan E2600AC image away from the deprecated .bin file and to the new .qca4019 method. As a result, we no longer need to carry around the legacy support for handling .bin files. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: add support for EnGenius EMD1Yen-Ting-Shen2020-01-262-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 (1 port) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: White, Blue, Red, Orange Flash instruction: From EnGenius firmware to OpenWrt firmware: In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emd1-squashfs-factory.bin directly. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the EnGenius firmware in the TFTP server directory on your computer. 2. Power up EMD1. Press 4 and then press any key to enter u-boot. 3. Download EnGenius firmware (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emd1-nor-fw-s.img 4. Flash the firmware (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script 5. Reboot (IPQ40xx) # reset Signed-off-by: Yen-Ting-Shen <frank.shen@senao.com> [removed BOARD_NAME] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ipq40xx: Add support for D-Link DAP-2610Fredrik Olofsson2020-01-262-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications ============== - SOC: IPQ4018 - RAM: DDR3 256MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: IPQ4018, 2x2, front end SKY85303-11 - 5GHz: IPQ4018, 2x2, front end SKY85717-21 - Ethernet: 1x 10/100/1000Mbps, POE 802.3af - PHY: QCA8072 - UART: GND, blocked, 3.3V, RX, TX / 115200 8N1 - LED: 1x red / green - Button: 1x reset / factory default - U-Boot bootloader with tftp and "emergency web server" accessible using serial port. Installation ============ Flash factory image from D-Link web UI. Constraints in the D-Link web UI makes the factory image unnecessarily large. Flash again using sysupgrade from inside OpenWrt to reclaim some flash space. Return to stock D-Link firmware =============================== Partition layout is preserved, and it is possible to return to the stock firmware simply by downloading it from D-Link and writing it to the firmware partition. # mtd -r write dap2610-firmware.bin firmware Quirks ====== To be flashable from the D-Link http server, the firmware must be larger then 6MB, and the size in the firmware header must match the actual file size. Also, the boot loader verifies the checksum of the firmware before each boot, thus the jffs2 must be after the checksum covered part. This is solved in the factory image by having the rootfs at the very end of the image (without pad-rootfs). The sysupgrade image which does not have to be flashable from the D-Link web UI may be smaller, and the checksum in the firmware header only covers the kernel part of the image. Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com> [added WRGG Variables to DEVICE_VARS, squashed spi pinconf/mux, added emd1's gmac0 config,fix dtc warnings] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k-firmware: fix mirror hashDENG Qingfang2020-01-241-1/+1
| | | | | | | | | Fix PKG_MIRROR_HASH hash mismatch. Fixes: 641a93f0f226 ("ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047") Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ipq40xx: add support for EZVIZ CS-W3-WD1200G EUPTom Brouwer2020-01-122-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware: SOC: Qualcomm IPQ4018 RAM: 128 MB Nanya NT5CC64M16GP-DI FLASH: 16 MB Macronix MX25L12805D ETH: Qualcomm QCA8075 (4 Gigabit ports, 3xLAN, 1xWAN) WLAN: Qualcomm IPQ4018 (2.4 & 5 Ghz) BUTTON: Shared WPS/Reset button LED: RGB Status/Power LED SERIAL: Header J8 (UART, Left side of board). Numbered from top to bottom: (1) GND, (2) TX, (3) RX, (4) VCC (White triangle next to it). 3.3v, 115200, 8N1 Tested/Working: * Ethernet * WiFi (2.4 and 5GHz) * Status LED * Reset Button (See note below) Implementation notes: * The shared WPS/Reset button is implemented as a Reset button * I could not find a original firmware image to reverse engineer, meaning currently it's not possible to flash OpenWrt through the Web GUI. Installation (Through Serial console & TFTP): 1. Set your PC to fixed IP 192.168.1.12, Netmask 255.255.255.0, and connect to one of the LAN ports 2. Rename the initramfs image to 'C0A8010B.img' and enable a TFTP server on your pc, to serve the image 2. Connect to the router through serial (See connection properties above) 3. Hit a key during startup, to pause startup 4. type `setenv serverip 192.168.1.12`, to set the tftp server address 5. type `tftpboot`, to load the image from the laptop through tftp 6. type `bootm` to run the loaded image from memory 6. (If you want to return to stock firmware later, create an full MTD backup, e.g. using instructions here https://openwrt.org/docs/guide-user/installation/generic.backup#create_full_mtd_backup) 7. Transfer the 'sysupgrade' OpenWrt firmware image from PC to router, e.g.: `scp xxx-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/upgrade.bin` 8. Run sysupgrade to permanently install OpenWrt to flash: `sysupgrade -n /tmp/upgrade.bin` Revert to stock: To revert to stock, you need the MTD backup from step 6 above: 1. Unpack the MTD backup archive 2. Transfer the 'firmware' partition image to the router (e.g. mtd8_firmware.backup) 3. On the router, do `mtd write mtd8_firmware.backup firmware` Signed-off-by: Tom Brouwer <tombrouwer@outlook.com> [removed BOARD_NAME, OpenWRT->OpenWrt, changed LED device name to board name] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ixp4xx: remove unmaintained targetAdrian Schmutzler2020-01-083-234/+0
| | | | | | | | | | | This target is still on kernel 4.9, and it looks like there is no active maintainer for this target anymore. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath10k-firmware: Add kmod-ath10k-ct-smallbuffers to dependsHauke Mehrtens2019-12-241-6/+6
| | | | | | | Only select ath10k-ct-regular when smallbuffers version was not selected. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-firmware: update Candela Tech firmware imagesStefan Lippers-Hollmann2019-12-231-20/+20
| | | | | | | | | | | | | | | | | The release notes since last time for wave-1: * No changes to wave-1, but I make a version .014 copy anyway to keep the makefile in sync. The release notes since last time for wave-2: * December 16, 2019: Wave-2 has a fix to make setting txpower work better. Before setting the power was ignored at least some of the time (it also appeared to work mostly, so I guess it was being correctly set in other ways). Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
* linux-firmware: update to 20191215DENG Qingfang2019-12-233-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update linux-firmware to 20191215 git log --pretty=oneline --abbrev-commit 20190815..20191215 eefb5f7 inside-secure: add new "mini" firmware for the EIP197 driver dd1a12e Merge branch 'RB3-adsp-cdsp-mss-v4' of https://github.com/andersson/linux-firmware c523dcd WHENCE: Add raspberry-pi4 SDIO file 99a15a4 Merge branch 'rpi4-fw' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware 2260cbd Merge branch 'master' of https://github.com/dikshitaagarwal/video_firmware_5.4 4c688be Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware e10ed21 qcom: update venus firmware files for v5.4 af4c4be cxgb4: Update firmware to revision 1.24.11.0 f93c7a1 brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B 212e441 qcom: Add SDM845 Compute DSP firmware ec84cf9 qcom: Add SDM845 Audio DSP firmware 62d0a1a qcom: Add SDM845 modem firmware e8a0f4c rtl_nic: add firmware rtl8168fp-3 9581f15 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware 978c04e linux-firmware: Update NXP Management Complex firmware to version 10.18.0 c62c3c2 linux-firmware: Update firmware file for Intel Bluetooth AX201 6272383 linux-firmware: Update firmware file for Intel Bluetooth AX200 84a7ca5 linux-firmware: Update firmware file for Intel Bluetooth 9560 96c3994 linux-firmware: Update firmware file for Intel Bluetooth 9260 7319341 amdgpu: update navi14 vcn firmware b363d9d amdgpu: update navi10 vcn firmware f1100dd Merge branch 'ehl_tgl_guc_huc' of git://anongit.freedesktop.org/drm/drm-firmware 4debf21 i915: Add HuC firmware v7.0.3 for TGL 1eb2ac4 i915: Add GuC firmware v35.2.0 for TGL 4b0a210 i915: Add HuC firmware v9.0.0 for EHL 610fe75 i915: Add GuC firmware v33.0.4 for EHL 11bdc57 rtw88: RTL8723D: add firmware file v48 9e194c7 qed: Add firmware 8.40.33.0 4065643 amdgpu: add new navi14 wks gfx firmware for 19.30 d4f88ea amdgpu: update navi14 firmware for 19.30 ea755b6 amdgpu: update raven firmware for 19.30 340e06e linux-firmware: Add firmware file for Intel Bluetooth AX201 ad7a8b2 Mellanox: Add new mlxsw_spectrum2 firmware 29.2000.2308 e756bf3 Mellanox: Add new mlxsw_spectrum firmware 13.2000.2308 b27d123 rtl_nic: add firmware files for RTL8153 180e2b4 rtl_bt: Update configuration file for BT part of RTL8822CU 0acd93e bnx2x: Add FW 7.13.15.0. 2b016af linux-firmware: Update AMD cpu microcode 4c3e853 linux-firmware: Update firmware file for Intel Bluetooth AX200 7a79d22 linux-firmware: Update firmware file for Intel Bluetooth AX201 fdab23a linux-firmware: Update firmware file for Intel Bluetooth 9560 b68efd7 linux-firmware: Update firmware file for Intel Bluetooth 9260 aa95e90 amdgpu: add initial navi14 firmware form 19.30 c1ce20e rtlwifi: rtl8821ae: Add firmware for the RTL8812AE variant. 7d187ac ice: Fix up WHENCE entry and symlink 4c55b97 Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/firmware 7c4db73 nvidia: Update Tegra210 XUSB firmware to v50.24 c054c53 nvidia: Add XUSB firmware for Tegra194 9cfefbd Remove duplicate symlinks 2de7abd copy-firmware: Create symlinks from WHENCE file 2116bcd Make symlinks consistent c0590d8 amdgpu: update vega20 ucode for 19.30 43cc648 amdgpu: update vega12 ucode for 19.30 ffa0ed7 amdgpu: update vega10 ucode for 19.30 83e1b41 amdgpu: update picasso ucode for 19.30 7008617 amdgpu: update raven2 ucode for 19.30 9200baa amdgpu: update raven ucode for 19.30 f25a39c amdgpu: add new raven rlc firmware 9ae61e7 ice: Add package file for Intel E800 series driver 417a9c6 amdgpu: add initial navi10 firmware 702cc63 Merge branch 'cml_tgl-icl-dmc_huc_updates' of git://anongit.freedesktop.org/drm/drm-firmware 3182b4b Merge branch 'gpu-845' of https://github.com/ndechesne/linux-firmware 3ea84e5 drm/i915/firmware: Add v9.0.0 of HuC for Icelake 60ddd0e drm/i915/firmware: Add v4.0.0 of HuC for Cometlake c47d8f8 drm/i915/firmware: Add v4.0.0 of HuC for Geminilake 2cdb78c drm/i915/firmware: Add v2.0.0 of HuC for Broxton 38965af drm/i915/firmware: Add v4.0.0 of HuC for Kabylake 8d127af drm/i915/firmware: Add v2.0.0 of HuC for Skylake e7b6fa7 drm/i915/firmware: Add v33 of GuC for CML e4ea25f drm/i915/firmware: Add v2.04 of DMC for TGL 51deca6 drm/i915/firmware: Add v1.09 of DMC for ICL 88ea23e qcom: add firmware files for Adreno a630 6c6918a linux-firmware: Update firmware file for Intel Bluetooth AX201 6ddb9d9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware d45c950 nvidia: Add XUSB firmware for Tegra186 65c6595 Add symlinks for Tegra VIC firmware binaries 0b22bfc rtl_bt: Update RTL8723D BT FW to 0x828A_96F1 f667c00 rtl_nic: add firmware rtl8125a-3 fe1ae0d linux-firmware: Add firmware file for Intel Bluetooth AX201 2f885ba Chelsio driver loads firmware configuration file to allow firmware to distribute resources before chip bring up. Chelsio NIC driver, cxgb4 searches for firmware config file at /lib/firmware/cxgb4/ directory. 7307a29 brcm: Add 43455 based AP6255 NVRAM for the Minix Neo Z83-4 Mini PC 65d02cd brcm: Add 43340 based AP6234 NVRAM for the PoV TAB-P1006W-232 tablet f38fb4f Merge tag 'iwlwifi-fw-2019-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware 40e4162 iwlwifi: update FWs to core45-152 release c0fb3d9 check_whence: Add copy-firmware.sh to the list of ignored files aa703aa rtl_bt: Update RTL8822C BT FW to V0x098A_94A4 665001a linux-firmware: Update firmware file for Intel Bluetooth AX200 c0ca980 linux-firmware: Update firmware file for Intel Bluetooth AX201 b6427bf linux-firmware: Update firmware file for Intel Bluetooth 9560 fe48882 linux-firmware: Update firmware file for Intel Bluetooth 9260 ebd40c6 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1886 Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> [Added missing symbolic links to Makefile] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq-wifi: add BDF for Aruba AP-303David Bauer2019-12-202-0/+2
| | | | | | The BDF originates from the vendor-firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* cypress-nvram: add new packageÁlvaro Fernández Rojas2019-12-181-0/+95
| | | | | | | This package contains nvram files for brcmfmac, a mac80211 driver for FullMAC Cypress devices. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcmfmac-board-rpi: remove uneeded packageÁlvaro Fernández Rojas2019-12-171-53/+0
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* cypress-firmware: add new packageÁlvaro Fernández Rojas2019-12-171-0/+239
| | | | | | | This package contains firmwares provided by Cypress See https://community.cypress.com/community/linux Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-12-101-24/+24
| | | | | | | | | | | | | | The release notes since last time for wave-1: * November 29, 2019: Fix IBSS merge issue, related to TSF id leakage bug in firmware code. Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test. The release notes since last time for wave-2: * December 6, 2019: Fix 160Mhz problem caused by logic that did not take into account the fact that 160Mhz has only 1/2 of the NSS of lower bandwidths in the rate table. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* wireless-regdb: Make it build with python2Hauke Mehrtens2019-11-211-0/+58
| | | | | | | | This backports a patch to build it work with python2 in addition to python3. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Petr Štetiar <ynezz@true.cz>
* am33x-cm3: removeAndre Heider2019-11-201-42/+0
| | | | | | | | | | | | | | | This is currently unused and not working anyway, since the used upstream kernel loads am335x-pm-firmware.elf and not am335x-pm-firmware.bin [0]. The last downstream patches using the latter were removed with e4eef7e6. Remove it instead of fixing it since the rtc-only sleep state can even damage the hardware [1]. [0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ccbbb9faac946ce61c241ce9f08b3486fabf031d [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302 Signed-off-by: Andre Heider <a.heider@gmail.com>
* firmware: intel-microcode: bump to 20190918Zoltan HERPAI2019-11-101-2/+2
| | | | | | | | | | | | | | | | | | | | * New upstream microcode datafile 20190918 *Might* contain mitigations for INTEL-SA-00247 (RAMBleed), given the set of processors being updated. * Updated Microcodes: sig 0x000306d4, pf_mask 0xc0, 2019-06-13, rev 0x002e, size 19456 sig 0x000306f4, pf_mask 0x80, 2019-06-17, rev 0x0016, size 18432 sig 0x00040671, pf_mask 0x22, 2019-06-13, rev 0x0021, size 14336 sig 0x000406f1, pf_mask 0xef, 2019-06-18, rev 0xb000038, size 30720 sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792 sig 0x00050657, pf_mask 0xbf, 2019-08-12, rev 0x500002b, size 51200 sig 0x00050662, pf_mask 0x10, 2019-06-17, rev 0x001c, size 32768 sig 0x00050663, pf_mask 0x10, 2019-06-17, rev 0x7000019, size 24576 sig 0x00050664, pf_mask 0x10, 2019-06-17, rev 0xf000017, size 24576 sig 0x00050665, pf_mask 0x10, 2019-06-17, rev 0xe00000f, size 19456 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: intel-microcode: bump to 20190618Zoltan HERPAI2019-11-101-2/+2
| | | | | | | | | | * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223 CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091 * Updated Microcodes: sig 0x000206d6, pf_mask 0x6d, 2019-05-21, rev 0x061f, size 18432 sig 0x000206d7, pf_mask 0x6d, 2019-05-21, rev 0x0718, size 19456 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* firmware: intel-microcode: bump to 20190514Zoltan HERPAI2019-11-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * New Microcodes: sig 0x00030678, pf_mask 0x02, 2019-04-22, rev 0x0838, size 52224 sig 0x00030678, pf_mask 0x0c, 2019-04-22, rev 0x0838, size 52224 sig 0x00030679, pf_mask 0x0f, 2019-04-23, rev 0x090c, size 52224 sig 0x000406c3, pf_mask 0x01, 2019-04-23, rev 0x0368, size 69632 sig 0x000406c4, pf_mask 0x01, 2019-04-23, rev 0x0411, size 68608 sig 0x00050657, pf_mask 0xbf, 2019-02-27, rev 0x5000021, size 47104 sig 0x000806e9, pf_mask 0x10, 2018-10-18, rev 0x009e, size 98304 sig 0x000806eb, pf_mask 0xd0, 2018-10-25, rev 0x00a4, size 99328 sig 0x000806ec, pf_mask 0x94, 2019-02-12, rev 0x00b2, size 98304 sig 0x000906ec, pf_mask 0x22, 2018-09-29, rev 0x00a2, size 98304 sig 0x000906ed, pf_mask 0x22, 2019-02-04, rev 0x00b0, size 97280 * Updated Microcodes: sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x000306d4, pf_mask 0xc0, 2019-03-07, rev 0x002d, size 19456 sig 0x000306e4, pf_mask 0xed, 2019-03-14, rev 0x042e, size 16384 sig 0x000306e7, pf_mask 0xed, 2019-03-14, rev 0x0715, size 17408 sig 0x000306f2, pf_mask 0x6f, 2019-03-01, rev 0x0043, size 34816 sig 0x000306f4, pf_mask 0x80, 2019-03-01, rev 0x0014, size 18432 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x00040661, pf_mask 0x32, 2019-02-26, rev 0x001b, size 25600 sig 0x00040671, pf_mask 0x22, 2019-03-07, rev 0x0020, size 14336 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 sig 0x000406f1, pf_mask 0xef, 2019-03-02, rev 0xb000036, size 30720 sig 0x00050654, pf_mask 0xb7, 2019-04-02, rev 0x200005e, size 32768 sig 0x00050662, pf_mask 0x10, 2019-03-23, rev 0x001a, size 32768 sig 0x00050663, pf_mask 0x10, 2019-03-23, rev 0x7000017, size 24576 sig 0x00050664, pf_mask 0x10, 2019-03-23, rev 0xf000015, size 23552 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000506f1, pf_mask 0x01, 2019-03-21, rev 0x002e, size 11264 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000806e9, pf_mask 0x10, 2019-04-01, rev 0x00b4, size 98304 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000806ea, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000806eb, pf_mask 0xd0, 2019-03-30, rev 0x00b8, size 98304 sig 0x000806ec, pf_mask 0x94, 2019-03-30, rev 0x00b8, size 97280 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304 sig 0x000906ed, pf_mask 0x22, 2019-03-17, rev 0x00b8, size 97280 * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223 CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091 Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-11-051-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The release notes since last time for wave-1: * October 5, 2019: Fix too-short msg caused by invalid use of PayloadLen in receive path. This appears to resolve the issue of getting (and ignoring) too-short commands when we detect loss of CE interrupts and go into polling mode. * October 12, 2019: Fix regression in IBSS mode that caused SWBA overrun issues. Related to regression added during the ct-station logic, specifically TSF allocation. Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test. * October 15, 2019: Only send beacon tx completion events if we can detect CT driver is being used (based on CT_STATS_OK flag being set). This should help CT firmware work better on stock driver. The release notes since last time for wave-2: * October 15, 2019: Only send beacon tx completion events if we can detect CT driver is being used (based on ATH10k_USE_TXCOMPL_TXRATE2 | ATH10k_USE_TXCOMPL_TXRATE1 flags being set). This should help CT firmware work better on stock driver. * October 31, 2019: Compile out peer-ratecode-list-event. ath10k driver ignores the event. * November 1, 2019: Fix rate-ctrl related crash when nss and other things were changed while station stays associated. See bug: https://github.com/greearb/ath10k-ct/issues/96 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047David Bauer2019-10-271-5/+5
| | | | | | | This fixes frequent crashes observed on a UniFi AC Mesh using OpenWrt master and 19.07. 18.06 seems not affected from our testing. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-firmware: retrieve wave 1 firmware from kvaloDavid Bauer2019-10-272-4/+4
| | | | | | | | | | | | | This commit changes the source of the Wave 1 ath10k-firmware from linux-firmware to Kall Valos ath10k-firmware repository. This is necessary as the firmware selected in linux-firmware produces frequent crashes in some circumstances. This patch can be removed as soon as linux-firmware carries 10.2.4-1.0-00047 firmware. Signed-off-by: David Bauer <mail@david-bauer.net>
* ipq-wifi: add AVM FRITZ!Repeater 1200 bdfDavid Bauer2019-10-232-0/+2
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* firmware: add Realtek RTL8822BE/RTL8822CE firmwareDavid Bauer2019-10-221-0/+15
| | | | | | | This commit adds packages for the Realtek RTl8822BE/RTL8822CE firmware to be used with the rtw88 driver. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-firmware: update Candela Tech firmware imagesRobert Marko2019-09-151-20/+20
| | | | | | | This enables a feature flag in the wave-2 firmware wmi-services indicating it can send software-encrypted raw frames. This should in turn allow the AP-VLAN feature to work. Signed-off-by: Robert Marko <robimarko@gmail.com>
* linux-firmware: add mediatek BT firmwareJohn Crispin2019-08-301-0/+9
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ath10k-firmware: update Candela Tech firmware imagesKoen Vandeputte2019-08-271-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | This should fix a problem with 1560 MTU, 160Mhz on DFS channels, some other small issues on < 5.2 kernels, and for 5.2 driver, it pulls in some upstream stable fixes. wave-1 firmware changes since last update: * June 24, 2019: Try allocating low-priority WMI msgs if high-prio are not available. * June 24, 2019: Init rate-ctrl to start at lowest rate instead of in the middle. Hoping this helps DHCP when station connects from a long distance. wave-2: * June 24, 2019 Start rate-ctrl at minimal values to help DHCP work better for far-away peers. * July 24, 2019 Fix old regression that made /a (and probably /b/g) perform poorly, at least on diet-compiled images. * Aug 8, 2019 Improve a/b/g rate-ctrl by damping the PER swings caused by the all-or-nothing logic of transmitting non-block-ack frames one at a time. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* linux-firmware: intel: Use recent version of wifi firmwareHauke Mehrtens2019-08-181-3/+3
| | | | | | | iwlwifi from the new backports also supports more recent FW versions, update to the most recent versions for already supported devices. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ipq-wifi: drop upstreamed custom board-2.binChristian Lamparter2019-08-189-15/+0
| | | | | | | | | | | | | | | | | | | | | | The BDFs for the: ALFA Network AP120C-AC ASUS Lyra AVM FRITZ!Box 7530 AVM FRITZ!Repeater 3000 EnGenius EAP1300 EnGenius ENS620EXT Netgear Orbi Pro SRK60 boards were upstreamed to the ath10k-firmware repository and linux-firmware.git. Furthermore the BDFs for the: OpenMesh A42 specific BDFs OpenMesh A62 specific BDFs Linksys EA6350v3 have been updated. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 02:32:32 +0000