aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel/ath10k-ct
Commit message (Collapse)AuthorAgeFilesLines
* ath10k-ct: Update to current versionRobert Marko2019-05-1111-48/+48
| | | | | | | | | | | | | This patch updates ath10k-ct to current version. Changes are: ath10k-ct: Fix printing PN in peer stats. Previous logic was incorrect. Also add set-special API to enable returning PN. Patches refreshed and tested on 8devices Jalapeno dev board(IPQ4019) Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath10k-ct: Update to 2019-04-08Koen Vandeputte2019-04-231-3/+3
| | | | | | | | | | | | | | | | 9cd701a4f028 ath10k-ct: Add PN get/set API for wave-2 firmware. 5c8a4668323b ath10k-ct: Support over-riding the power ctl table in eeprom 75e2705f31bb ath10k-ct: CCA, eeprom, other changes. a696e602a0fc ath10k-ct: Attempt to fix-out-of-tree compile for 4.16 a2aec62262df ath10k: Improve beacon tx status for 4.20 kernel. be5c21a82b15 ath10k-ct: Fix out-of-tree compile for 4.20, pull in stable changes for 4.19 Fixes compile errors when using the 4.20 flavour. Also the amount of beacon errors seems to have dropped. Tested on a Mikrotik RB912UAGS-5HPacD Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath10k-ct: Update to 2019-03-25Christian Lamparter2019-03-256-23/+23
| | | | | | | | 2e917efb607f ath10k: Add slow-pci bus work-around, sw-crypt blockack support. cc73ceb0dbc7 ath10k: Fix out-of-tree compile for 4.16 driver. 4b3cf7c20972 ath10k: Improve tx-status reporting. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath10k-ct: limit available channels via DTDavid Bauer2019-03-061-0/+39
| | | | | | | | | | | | | | | This backports upstream commit 34d5629 ath10k: limit available channels via DT ieee80211-freq-limit to the 4.19 ath10k-ct version. Without this patch, disabled channels are still listed as a supported configuration for the radio. The identical patch was also backported by OpenWRT to the non-ct driver. It can be dropped as soon as we switch to an ath10k-ct version based on 4.20 or higher. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath10k-ct: Update to 2019-02-28Michael Yartys2019-03-0610-53/+53
| | | | | | | | | 9360f389234a ath10k: Support up to 24 vAP per radio, fix DMA bug in wave-1. 9cbf8d430974 ath10k-ct: Add 4.20 driver, SGI support for fixed-rate tx. Runtime tested on: ipq806x Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
* ath10k-ct: fix incorrect multicast/broadcast rate settingSven Eckelmann2019-02-264-2/+82
| | | | | | | | | | | | | | | | | If no mcast_rate is set for the wifi-iface then there is no rate_idx (0) set for the bss. This can break for example 5GHz meshpoint interfaces because 0 maps to a CCK rate (11Mbit/s). It must also be avoided that the ath10k-ct internal state for the rates is not synced with the mac80211 rates state. Otherwise, the user specified rate (e.g. a wifi-iface mcast_rate for a meshpoint interface) will only be set on startup. And a short while after that, ath10k-ct specific code in ath10k_check_apply_special_rates is missing a valid rate in its own structures and is then recalculating a new default rate. This default rate is in most situations not the requested rate. Fixes: 4df3c71cd4c5 ("ath10k-ct: Update to 2018-12-11 and use version based on 4.19") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ath10k-ct: support for management rate controlSven Eckelmann2019-02-113-1/+156
| | | | | | | | | | | | By default the firmware uses 1Mbps and 6Mbps rate for management packets in 2G and 5G bands respectively. But when the user selects different basic rates from the userspace, we need to send the management packets at the lowest basic rate selected by the user. This change makes use of WMI_VDEV_PARAM_MGMT_RATE param for configuring the management packets rate to the firmware. Signed-off-by: Sven Eckelmann <sven@narfation.org>
* ath10k-ct: Update to 2018-12-20Robert Marko2018-12-244-21/+21
| | | | | | | | | | | This version removes a lot of unusefull warnings that would quickly overflow the dmesg. Warnings like this: ath10k_ahb a800000.wifi: Invalid legacy rate 26 peer stats ath10k_ahb a000000.wifi: Invalid VHT mcs 15 peer stats On this version I only had 2 warnings at all. Tested on 8devices Jalapeno. Signed-off-by: Robert Marko <robimarko@gmail.com>
* ath10k-ct: Update to 2018-12-11 and use version based on 4.19Hauke Mehrtens2018-12-155-24/+583
| | | | | | | | | | This updates the ath10k-ct driver to the version from 2018-12-11 and selects the ath10k-ct version based on kernel 4.19 by default. CONFIG_ATH10K_CE was introduced between kernel 4.16 and 4.19 and is a mandatory option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: Update to 29-09-2018Robert Marko2018-10-113-102/+4
| | | | | | | | | | | | | | | | | Update ath10k-ct to be able to drop 210-ath10k-fix-recent-bandwidth-conversion-bug.patch as its upstream. b9989fbd5d6e ath10k-ct: Add upstream patch to fix peer rate reporting. ac9224344dbf ath10k-ct: Support sending custom frames with no-ack flag. bc938bc2021e ath10k-ct: Support sending pkts with specific rate on 10.4 firmware. Runtime tested on: - GL-iNet GL-B1300 - Mikrotik RB912 + QCA9882 Signed-off-by: Robert Marko <robimarko@gmail.com> [Added list of all changes from previous version + add own test device] Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ath10k-ct: fix bandwidth conversion bugHauke Mehrtens2018-09-281-0/+98
| | | | | | | | | | This backports a patch from the upstream kernel which was also shipped previously in mac80211. This fixes the following warning: WARNING: CPU: 0 PID: 2881 at backports-4.19-rc5-1/net/wireless/util.c:1146 cfg80211_calculate_bitrate+0x238/0x348 [cfg80211] invalid rate bw=2, mcs=0, nss=1 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: adds leds supportAnsuel Smith2018-09-283-0/+663
| | | | | | This rework and adds patch from ath10k source to make leds work also on candela source Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ath10k-ct: update to version ath10k-4.16Hauke Mehrtens2018-09-264-9/+219
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: bump to git HEADStijn Tintel2018-08-261-3/+3
| | | | | | | | | | e0d2ce0 ath10k: Support setting tx_antenna in descriptor field. 29c644f Update to latest 4.13 and 4.16 ath10k-ct drivers. 20db9db ath10k: Support vdev stats for 4.9, 4.16 kernel fd92066 ath10k: Support 'ct-sta-mode' for 9984 firmware that supports it. 34954f0 ath10k: get_tsf, PMF Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ath10k-ct: fix build with current mac80211 packageJo-Philipp Wich2018-07-301-4/+15
| | | | | | | | | | | Commit 2dcd955aea ("mac80211: backport and update patches for ath10k") changed the DFS detector API, causing ath10k-ct to fail building due to a missing add_pulse() argument. Extend the already existing kernel compatibility patch to also adjust the add_pulse() call accordingly. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath10k-ct: search DT for BDF variant infoSven Eckelmann2018-07-073-1/+363
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on QCA4019 using bus, bmi-chip-id and bmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill the vendor requirements and it is necessary to use a different board data file. This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8. Something similar has to be provided for systems without SMBIOS but with device trees. No solution was specified by QCA and therefore a new one has to be found for ath10k. The device tree requires addition strings to define the variant name wifi@a000000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; wifi@a800000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; This would create the boarddata identifiers for the board-2.bin search * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ath10k-ct: Update driver to latestKoen Vandeputte2018-06-011-3/+3
| | | | | | | | | | 127f98189ee5 ath10k: Fix bad return w/out unlock, compile w/out debugfs b8f48f3c138f Fix survey-dump for 4.7, 4.9 and 4.13 kernels. fa8259ad5d6d ath10k-ct: Support survey dump in 10.1 firmware. 2853e1337ecf ath10k-ct: Add 4.16 ath10k-ct driver to package. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> CC: Ben Greear <greearb@candelatech.com>
* ath10k-ct: make it depend on PCI support againHauke Mehrtens2018-04-181-1/+1
| | | | | | | | | | | | The missing dependency causes build problems on systems without PCI support. The ath10k_pci kernel module depends on PCI support so this dependency should be added. ath10k now also supported the ahb interface on the IPQ4019 SoC, but this SoC also has PCI support so this extra dependency is not as problem. Fixes: d0f3dd5b9f34176 ("ath10k-ct: update to latest version, enable AHB.") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: fix module dependsHauke Mehrtens2018-03-231-5/+5
| | | | | | | | | | | | PKG_EXTMOD_SUBDIRS should be set to the sub directory where the kernel module gets build in, for the ath10k-ct driver this changed in commit 3888e77c1c68 from ath10k to ath10k-4.13. Without this fix the depends line of the ath10*.ko modules is empty and the kernel module load system will not automatically load the depended modules like mac80211. Fixes: 3888e77c1c68 ("ath10k-ct driver: use dma_alloc_coherent, 4.13 based driver") Fixes: 23a388fe41ec ("ath10k-ct: Force loading mac80211 and ath modules.") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: Update driver to latest.Ben Greear2018-03-231-3/+3
| | | | | | | | Among other things, this will check for an htt-mgt variant of ath10k-ct firmware before loading 'normal' firmware, and it disables verbose printing of firmware DBGLOG messages by default. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Update DEPENDS and PROVIDESBen Greear2018-03-231-0/+1
| | | | | | | | | | Update DEPENDS and PROVIDES so that ath10k-ct firmware and drivers can be used to replace stock firmware and drivers. The -htt firmware variant, which requires ath10k-ct driver now selects ath10k-ct driver when the firmware is selected. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Force loading mac80211 and ath modules.Ben Greear2018-03-221-1/+1
| | | | | | | They are not automatically loaded on IPQ4019 (at least) machines for some reason. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: update to latest version, enable AHB.Ben Greear2018-03-222-42/+8
| | | | | | | | | | | | | | | | The driver updates include: ath10k driver backport to fix WPA 'pn' related security bugs (4.13 based driver only currently), a fix for off-channel TX for CT wave-1 firmware, a likely fix for napi related crashes, and a backport of the firmware fetch patch. AHB is needed for the IPQ4019 platform radios. Signed-off-by: Ben Greear <greearb@candelatech.com> [use common subject format] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath9k, ath10k(-ct): move spectral scan support under a separate config symbolMatthias Schiffer2018-01-132-2/+88
| | | | | | | | | | | | | Backport patches that separate spectral scan support from general debugfs support of ath9k/ath10k; this allows to remove the dependency on KERNEL_RELAY from these driver packages even with debugfs enabled and avoids the memory footprint of the relay buffers allocated by ath9k/ath10k even when they aren't used at all. The KERNEL_RELAY dependency is moved to a new config symbol that enables spectral scan support in these drivers. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* build: use KERNEL_MAKE_FLAGS for kernel file compilationsKarl Vogel2017-10-291-2/+1
| | | | | | | The build system already defines KERNEL_CROSS which defaults to TARGET_CROSS. Make use of this variable for kernel makefiles. Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
* ath10k-ct: switch to AutoProbeJonas Gorski2017-10-271-1/+1
| | | | | | | Now that we have working module dependency generation, we can switch to AutoProbe and let modprobe handle loading required modules. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ath10k-ct: define module directoriesJonas Gorski2017-10-271-0/+1
| | | | | | | Define the module subdir so our buildsystem properly picks up the Module.symvers. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ath10k-ct: activate user space firmware loading againHauke Mehrtens2017-10-124-10/+46
| | | | | | | | | This backports a patch from kernel 4.14 to the ath10k-ct version based on kernel 4.13. Some devices are using a user space script to load the calibration data from the flash and this was not trigged any more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct driver: use dma_alloc_coherent, 4.13 based driverBen Greear2017-10-121-6/+11
| | | | | | | | | | This should help ath10k work on systems with little or no IOMMU memory. apu2 can boot two 9888 NICs now, for instance. From upstream patch by Adrian Chadd. And, start building the 4.13 based CT ath10k driver. Signed-off-by: Ben Greear <greearb@candelatech.com>
* mac80211: update to backports-4.14-rc2Hauke Mehrtens2017-10-013-8/+112
| | | | | | | | | | | | | | | | | | | | This updates mac80211 to backprots-4.14-rc2. This was compile and runtime tested with ath9k, ath10k and b43 with multiple stations and ieee80211w and in different scenarios by many other people. To create the backports-4.14-rc2-1.tar.xz use this repository: https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git from tag v4.14-rc2-1 Then run this: ./gentree.py --git-revision v4.14-rc2 --clean <path to linux repo> ../backports-4.14-rc2-1 This also adapts the ath10k-ct and mt76 driver to the changed cfg80211 APIs and syncs the nl80211.h file in iw with the new version from backports-4.14-rc2. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ath10k-ct: Update to latest ath10k-ct driver.Ben Greear2017-05-181-3/+3
| | | | | | | | | | | | | Supports disabling firmware hex logging that many found too verbose. Increase BMI timer so system works more often with 9888 Compex NIC (and maybe others). Allow configuring a specific board-file per NIC using fwcfg file. Maybe fix a scan-busy problem when using CT firmware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: depend on kmod-hwmon-core, it gets used when CONFIG_THERMAL is setFelix Fietkau2017-02-011-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: fix kernel api compatibility issuesFelix Fietkau2017-02-012-0/+108
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.Ben Greear2017-02-011-3/+3
| | | | | | | The driver had a bug when calculating the rateset. This resolves that and allows full VHT mcs rates on 2x2 hardware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Update to latest CT 4.7 ath10k driver.Ben Greear2017-01-131-2/+2
| | | | | | | | This at least makes it harder to hit some txq related crashes on firmware restart, a potential memory leak, and some other fixes. Signed-off-by: Ben Greear <greearb@candelatech.com>
* treewide: clean up and unify PKG_VERSION for git based downloadsFelix Fietkau2016-12-221-4/+2
| | | | | | Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Enable DFS when "Enable DFS support" is set for kmod-athAndy Strohman2016-12-201-0/+4
| | | | | | | | This allows users of this package to configure DFS channels. It mimics the behaviour of the ath10k module included in package mac80211 Signed-off-by: Andy Strohman <andrew@andrewstrohman.com>
* ath10k-ct: ath10k-ct specifies that it supports 802.11ac modeAlexis Green2016-12-201-1/+1
| | | | Signed-off-by: Alexis Green <agreen@cococorp.com>
* treewide: clean up download hashesFelix Fietkau2016-12-161-0/+1
| | | | | | Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Update to latest CT ath10k driver.Ben Greear2016-12-161-2/+2
| | | | | | | | This works around deadlock and/or memory corruption during firmware crash and improves ability to configure number of tids in firmware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Update to latest.Ben Greear2016-11-221-2/+2
| | | | | | Fixes locking issue, quietens some potential message floods. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Add QCA9888/9886 support, fix compat issue.Ben Greear2016-10-271-2/+2
| | | | | | | This should fix problems with latest backports, and also adds driver support for QCA9888 chipset. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Update to latest 4.7 CT ath10k driver.Ben Greear2016-10-191-2/+2
| | | | | | | | Adds Sebastian's 160Mhz support (un-tested), remove DMA32 change that broke some x86 systems, allow setting 10.1 CT firmware keepalive watchdog timeout, support QCA 9887 hardware, and some other tweaks. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: fix missing symbols if ath9k is not selectedAlexis Green2016-09-051-1/+1
| | | | | | Require kernel to compile with CONFIG_RELAY=y Signed-off-by: Alexis Green <alexis@cessp.it>
* ath10k-ct: Remove useless WARNING for 10.4 firmware.Ben Greear2016-08-281-2/+2
| | | | | | | Removes a useless splat in ath10k, and adds some safety code around setting keys in the firmware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Update to latest ath10k-ct driver.Ben Greear2016-08-231-2/+2
| | | | | | | | | This uses GFP_DMA32 for firmware swap. Fixes issue on x86-64 with QCA 9984 chipset when host system does not have vt-d enabled. Also tested on linksys ea8500 with 9980 chipset. Signed-off-by: Ben Greear <greearb@candelatech.com>
* ath10k-ct: Fix loading 9980 firmware.Ben Greear2016-08-111-2/+2
| | | | | | | | | | | ath10k-ct driver was using bad defaults for 9980 if user had not specified a fwcfg file to over-ride them. Also, support configurable station-kickout-threshold, which might work around issues with flakey connections. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix PKG_VERSION]
* ath10k-ct: Update to latest ath10k-ct driver.Ben Greear2016-07-231-2/+2
| | | | | | Adds support for 9984 NICs, and an upstream bugfix or two. Signed-off-by: Ben Greear <greearb@candelatech.com>
* add ath10k-ct: Candela-Tech ath10k out-of-tree driver.Ben Greear2016-07-141-0/+80
This lets one use the CT ath10k driver instead of the built-in ath10k driver from the upstream kernel (or backports). This should be a drop-in replacement, as well as enabling better CT firmware support. Signed-off-by: Ben Greear <greearb@candelatech.com>