aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel/linux
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: switch to upstream owl-loader driverChristian Lamparter2019-11-301-21/+0
| | | | | | | | | | | | | | | | | | The Owl Loader (named after the codename that Atheros gave these devices back in the day) has been accepted upstream. This patch removes the "misc" driver OpenWrt had and adds the remaining differences against the version that ships with 5.4-rc1 into a separate "120-owl-loader-compat.patch" file that can be cut down once AR71XX is being dealt with. Note: I decided to keep the existing (kmod-)owl-loader package name around for now. The kernel module file in the kmod package will be called ath9k_pci_owl_loader.ko though. Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: fix typo in fb-sys-fops autoloadSungbo Eo2019-11-141-1/+1
| | | | | | | AutoLoad parameter must match the exact kernel module name. Fix it. Fixes: 125f1ce9ad0c ("kernel: video: add DRM core and IMX DRM support for HDMI/LVDS") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: add crypto_user mod to crypto-user pkgEneas U de Queiroz2019-11-061-2/+4
| | | | | | | | This is needed to export crypto information to netfilter, allowing the alt. afalg openssl engine to obtain information about the drivers being used. Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
* kernel: mark kmod-usb-serial-wwan as hiddenYousong Zhou2019-10-301-2/+2
| | | | | | | | | The kconfig symbol is an invisible one since its introduction. It is not supposed to be enabled on its own. Resolves FS#1821 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: netfilter: reuse kconfig and files info from include dirYousong Zhou2019-10-241-23/+9
| | | | | | Less chance of missing out kconfig symbols at least Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: add package for Epson RX-8025 and compatible I2C RTCMathew McBride2019-10-191-0/+17
| | | | | | | RX-8025 is an I2C RTC from Epson, some newer products such as the RX-8035 are also compatible. Signed-off-by: Mathew McBride <matt@traverse.com.au>
* kernel: fix MBIM descriptionBjørn Mork2019-10-171-1/+1
| | | | Signed-off-by: Bjørn Mork <bjorn@mork.no>
* kernel: add kmod-iio-bme680Stijn Tintel2019-10-131-0/+45
| | | | | | | | | This driver supports the Bosch Sensortec BME680 gas, humidity, pressure and temperature sensor. Tested I2C and SPI modes on a Raspberry Pi Zero W. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: NFSD: add dependency kmod-crypto-arc4 for kmod-fs-nfs-common-rpcsecRuixi Zhou2019-10-121-1/+2
| | | | | | | | | | crypto-arc4 move into a module with commit c3a78955f34a61d402044f357f54f21c75a19ff9, fs-nfs-common-rpcsec compile error without arc4 support. Ref: https://github.com/openwrt/packages/issues/9912 Fixes: c3a78955f34a ("kernel: move crypto-arc4 into a module") Signed-off-by: Ruixi Zhou <zhouruixi@gmail.com>
* kernel: fix typos in video KernelPackage descriptionSungbo Eo2019-10-121-2/+2
| | | | | | | Fixes: 4b3d17b709a5 ("kernel: add kmod-fb-sys-ram") Fixes: b774acb47912 ("package/modules: add missing gspca video drivers for 2.6.32 (patch from #6595)") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* kernel: kmod-rtc-pcf2127: Fix dependenciesHauke Mehrtens2019-10-121-0/+1
| | | | | | | | | | Add missing dependencies to i2c-core and regmap-spi. These get activated when these modules are build in this driver, which is the case when we build all modules. This fixes the build on some targets. This was found by the buildbot. Fixes: 34e2526f9fcc ("kernel: add kmod-rtc-pcf2127") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: add kmod-rtc-pcf2127Robert Marko2019-10-061-0/+16
| | | | | | Add kernel module to support NXP PCF2127 and PCF2129 RTC clocks. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: add module for Emulex OneConnect 10GbitAlberto Bursi2019-09-191-0/+21
| | | | | | | | add module to support Emulex OneConnect common in 10Gbit SFP+ cards by Dell/HP/IBM supports OneConnect OCe10xxx OCe11xxx OCe14xxx, LightPulse LPe12xxx Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* kernel: move crypto-arc4 into a moduleFelix Fietkau2019-08-263-1/+13
| | | | | | It is no longer required by wireless drivers, so we can save some space here Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add i2c-pxa driverVladimir Vid2019-08-241-0/+17
| | | | Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* kernel: drop mvebu support in kmod-usb3Tomasz Maciej Nowak2019-08-051-1/+0
| | | | | | | This is already enabled as kernel built-in feature in mvebu target and none other target will use it. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* Revert "kmod-sched-cake: drop out of tree package, use kernel version"Kevin Darbyshire-Bryant2019-07-291-16/+0
| | | | | | This reverts commit 5c094ff660fd8e750ed1c1f38719a45065e77348. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "netsupport: move out sch_cake from kmod-sched"Kevin Darbyshire-Bryant2019-07-291-1/+1
| | | | | | This reverts commit b31f9190c3c9736f0f2a9fc810eba5b6f43a6b05. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* netsupport: move out sch_cake from kmod-schedKevin Darbyshire-Bryant2019-07-091-1/+1
| | | | | | | | | | Fix file installation clash between kmod-sched & kmod-sched-cake as both try to install sch_cake.ko Remove cake from kmod-sched package as cake is supposed to be the optional qdisc. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* netsupport: move out mqprio from kmod-schedKonstantin Demin2019-07-081-1/+1
| | | | | | | | | | | | | Currently, there's unable to install "kmod-sched-mqprio" after "kmod-sched" (or vice versa), because "sch_mqprio.ko" is shipped in both packages. Fixes: f83522fa6361 ("linux: Add kmod-sched-mqprio") Fixes: 6af639e0bf78 ("linux: Add kmod-sched-act-vlan") Fixes: 72c7e2dc467c ("linux: Add kmod-sched-flower") Signed-off-by: Konstantin Demin <rockdrilla@gmail.com> [Add cls_flower and act_vlan] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kmod-sched-cake: drop out of tree package, use kernel versionKevin Darbyshire-Bryant2019-07-081-0/+16
| | | | | | | | | | | | | | CAKE made it to kernel 4.19 and since OpenWrt now at kernel 4.19 we can drop the out of tree cake package in base repository. Add kmod-sched-cake to netsupport so package dependencies are still met. Similarly CAKE is retained as an optional qdisc module to avoid base scheduler package size implications. Backport upstream patches from k5.1 to address some small bugs and support fwmark usage. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: alx driver for AR816x/AR817x EthernetStefan Lippers-Hollmann2019-06-221-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These ethernet cards can be found onboard various x86 and x86_64 Gigabyte mainboards since the sandy-bridge/ ivy-bridge era. This driver supports the following QCA/"Killer" ethernet cards: 1969:1091 - AR8161 Gigabit Ethernet 1969:1090 - AR8162 Fast Ethernet 1969:10A1 - AR8171 Gigabit Ethernet 1969:10A0 - AR8172 Fast Ethernet 1969:E091 - Killer E2200 Gigabit Ethernet 1969:E0A1 - Killer E2400 Gigabit Ethernet 1969:E0B1 - Killer E2500 Gigabit Ethernet Successfully runtime tested with the onboard ethernet card of a Gigabyte GA-H77M-D3H ivy-bridge mainboard (x86_64/EFI image): 02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 [...] Subsystem: Gigabyte Technology Co., Ltd AR8161 [...] Kernel driver in use: alx Kernel modules: alx alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [...] alx 0000:02:00.0 eth0: NIC Up: 1 Gbps Full Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [fix typo, shorten subject to <50 characters, shorten lines to <76 chars.]
* kernel: fix kmod-tpm 4.19 dependenciesChristian Lamparter2019-06-221-0/+1
| | | | | | | | | | | | This patch fixes the ath79-nand build error: |Package kmod-tpm is missing dependencies for the following libraries: |rng-core.ko by making it depend on rng-core from 4.19 onwards. This should work as 4.9 is gone so only 4.14 and 4.19 are there. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: dm: add dm-raid for LVM raidChris Koying Browet2019-06-201-1/+23
| | | | | | | This adds the dm-raid kmod, which is needed for LVM builtin raid configurations, aka "MD-over-LVM" Signed-off-by: Chris Koying Browet <cbro@semperpax.com>
* kernel: package Broadcom BNX2X driverPetko Bordjukov2019-06-201-1/+19
| | | | | | | | | | bnx2x driver support for the x86 architecture. Includes module and firmware for Broadcom QLogic 5771x/578xx 10/20-Gigabit ethernet adapters. Signed-off-by: Petko Bordjukov <bordjukov@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added +kmod-lib-zlib-inflate as well]
* treewide: fix syntax errors exposed after kconfig updateJo-Philipp Wich2019-06-201-3/+3
| | | | | | | | | | | | | | After commit e82a4d9cfb ("config: regenerate *_shipped sources") the mconf parser became more strict as a side effect and started to spew a series of warnings when evaluating our generated kconfig sources: tmp/.config-package.in:705:warning: ignoring unsupported character '@' The root cause of these warnings is a wrong use of the @SYMBOL dependency syntax in various Makefile. Fix the corresponding Makefiles by turning `@SYM||@SYM2` expressions into the proper `@(SYM||SYM2)` form. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netsupport: add kmod-nshYousong Zhou2019-06-201-0/+17
| | | | | | This is required by kmod-openvswitch since linux 4.15. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: package module for SafeXcel crypto engineTomasz Maciej Nowak2019-06-171-0/+25
| | | | | | | | | | Supports EIP97 and EIP197 found on Armada 37xx, 7k and 8k SoCs. Unfortunately firmware for EIP197 is not easily obtainable, therefore to not cause lot of user requests directed at OpenWrt, package it as module with explanation where to obtain the firmware. Cc: Marek Behún <marek.behun@nic.cz> Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* netsupport: improve xfrm module supportAndré Valentin2019-06-161-2/+2
| | | | | | | -switch to module autoprobe -exclude 4.9 kernel Signed-off-by: André Valentin <avalentin@marcant.net>
* kernel: Add AEAD and RNG support to kmod-crypto-userRosen Penev2019-06-151-1/+5
| | | | | | | | Now that kernel 3.18 is gone, we can safely add these features. Tested on Turris Omnia. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* netsupport: add xfrmi interface supportAndré Valentin2019-06-091-0/+16
| | | | | | | | Add support for xfrm interfaces in kernel. XFRM interfaces are used by the IPsec stack for tunneling. XFRM interfaces are available since linux 4.19. Signed-off-by: André Valentin <avalentin@marcant.net>
* kernel: backport act_ctinfoKevin Darbyshire-Bryant2019-06-061-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ctinfo is a new tc filter action module. It is designed to restore information contained in firewall conntrack marks to other packet fields and is typically used on packet ingress paths. At present it has two independent sub-functions or operating modes, DSCP restoration mode & skb mark restoration mode. The DSCP restore mode: This mode copies DSCP values that have been placed in the firewall conntrack mark back into the IPv4/v6 diffserv fields of relevant packets. The DSCP restoration is intended for use and has been found useful for restoring ingress classifications based on egress classifications across links that bleach or otherwise change DSCP, typically home ISP Internet links. Restoring DSCP on ingress on the WAN link allows qdiscs such as but by no means limited to CAKE to shape inbound packets according to policies that are easier to set & mark on egress. Ingress classification is traditionally a challenging task since iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT lookups, hence are unable to see internal IPv4 addresses as used on the typical home masquerading gateway. Thus marking the connection in some manner on egress for later restoration of classification on ingress is easier to implement. Parameters related to DSCP restore mode: dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the conntrack mark field contain the DSCP value to be restored. statemask - a 32 bit mask of (usually) 1 bit length, outside the area specified by dscpmask. This represents a conditional operation flag whereby the DSCP is only restored if the flag is set. This is useful to implement a 'one shot' iptables based classification where the 'complicated' iptables rules are only run once to classify the connection on initial (egress) packet and subsequent packets are all marked/restored with the same DSCP. A mask of zero disables the conditional behaviour ie. the conntrack mark DSCP bits are always restored to the ip diffserv field (assuming the conntrack entry is found & the skb is an ipv4/ipv6 type) e.g. dscpmask 0xfc000000 statemask 0x01000000 |----0xFC----conntrack mark----000000---| | Bits 31-26 | bit 25 | bit24 |~~~ Bit 0| | DSCP | unused | flag |unused | |-----------------------0x01---000000---| | | | | ---| Conditional flag v only restore if set |-ip diffserv-| | 6 bits | |-------------| The skb mark restore mode (cpmark): This mode copies the firewall conntrack mark to the skb's mark field. It is completely the functional equivalent of the existing act_connmark action with the additional feature of being able to apply a mask to the restored value. Parameters related to skb mark restore mode: mask - a 32 bit mask applied to the firewall conntrack mark to mask out bits unwanted for restoration. This can be useful where the conntrack mark is being used for different purposes by different applications. If not specified and by default the whole mark field is copied (i.e. default mask of 0xffffffff) e.g. mask 0x00ffffff to mask out the top 8 bits being used by the aforementioned DSCP restore mode. |----0x00----conntrack mark----ffffff---| | Bits 31-24 | | | DSCP & flag| some value here | |---------------------------------------| | | v |------------skb mark-------------------| | | | | zeroed | | |---------------------------------------| Overall parameters: zone - conntrack zone control - action related control (reclassify | pipe | drop | continue | ok | goto chain <CHAIN_INDEX>) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Make suitable adjustments for backporting to 4.14 & 4.19 and add to SCHED_MODULES_FILTER Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: add package for atusb wpan moduleSebastian Meiling2019-06-061-0/+11
| | | | | | | | This adds a new package for the kernel module of the ATUSB WPAN driver. Signed-off-by: Sebastian Meiling <s@mlng.net> [fixed SoB: and From: mismatch] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* Revert "kernel: backport act_ctinfo"Kevin Darbyshire-Bryant2019-06-061-9/+1
| | | | | | | | | | This reverts commit 7c50182e0cdce0366715082872a2afbcf208bbf8. Produces build error: Package kmod-sched is missing dependencies for the following libraries: nf_conntrack.ko Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: backport act_ctinfoKevin Darbyshire-Bryant2019-06-061-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ctinfo is a new tc filter action module. It is designed to restore information contained in firewall conntrack marks to other packet fields and is typically used on packet ingress paths. At present it has two independent sub-functions or operating modes, DSCP restoration mode & skb mark restoration mode. The DSCP restore mode: This mode copies DSCP values that have been placed in the firewall conntrack mark back into the IPv4/v6 diffserv fields of relevant packets. The DSCP restoration is intended for use and has been found useful for restoring ingress classifications based on egress classifications across links that bleach or otherwise change DSCP, typically home ISP Internet links. Restoring DSCP on ingress on the WAN link allows qdiscs such as but by no means limited to CAKE to shape inbound packets according to policies that are easier to set & mark on egress. Ingress classification is traditionally a challenging task since iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT lookups, hence are unable to see internal IPv4 addresses as used on the typical home masquerading gateway. Thus marking the connection in some manner on egress for later restoration of classification on ingress is easier to implement. Parameters related to DSCP restore mode: dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the conntrack mark field contain the DSCP value to be restored. statemask - a 32 bit mask of (usually) 1 bit length, outside the area specified by dscpmask. This represents a conditional operation flag whereby the DSCP is only restored if the flag is set. This is useful to implement a 'one shot' iptables based classification where the 'complicated' iptables rules are only run once to classify the connection on initial (egress) packet and subsequent packets are all marked/restored with the same DSCP. A mask of zero disables the conditional behaviour ie. the conntrack mark DSCP bits are always restored to the ip diffserv field (assuming the conntrack entry is found & the skb is an ipv4/ipv6 type) e.g. dscpmask 0xfc000000 statemask 0x01000000 |----0xFC----conntrack mark----000000---| | Bits 31-26 | bit 25 | bit24 |~~~ Bit 0| | DSCP | unused | flag |unused | |-----------------------0x01---000000---| | | | | ---| Conditional flag v only restore if set |-ip diffserv-| | 6 bits | |-------------| The skb mark restore mode (cpmark): This mode copies the firewall conntrack mark to the skb's mark field. It is completely the functional equivalent of the existing act_connmark action with the additional feature of being able to apply a mask to the restored value. Parameters related to skb mark restore mode: mask - a 32 bit mask applied to the firewall conntrack mark to mask out bits unwanted for restoration. This can be useful where the conntrack mark is being used for different purposes by different applications. If not specified and by default the whole mark field is copied (i.e. default mask of 0xffffffff) e.g. mask 0x00ffffff to mask out the top 8 bits being used by the aforementioned DSCP restore mode. |----0x00----conntrack mark----ffffff---| | Bits 31-24 | | | DSCP & flag| some value here | |---------------------------------------| | | v |------------skb mark-------------------| | | | | zeroed | | |---------------------------------------| Overall parameters: zone - conntrack zone control - action related control (reclassify | pipe | drop | continue | ok | goto chain <CHAIN_INDEX>) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Make suitable adjustments for backporting to 4.14 & 4.19 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: Remove support for kernel 3.18Hauke Mehrtens2019-05-0315-35/+30
| | | | | | | | | | No target is using kernel 3.18 anymore, remove all the generic support for kernel 3.18. The removed packages are depending on kernel 3.18 only and are not used on any recent kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* omap24xx: Remove unmaintained targetHauke Mehrtens2019-05-031-15/+0
| | | | | | | | | | | | This target only supports kernel 4.1, which is not supported in OpenWrt any more for multiple releases. It also looks like there is no active maintainer for this target. Remove the code and all the packages which are only used by this target. To add this target to OpenWrt again port it to a recent and supported kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: iio: Fix BMP280 Auto probingRobert Marko2019-05-021-2/+2
| | | | | | | | Currently Auto probing for BMP/BME280 does not work because kernel module name in the call is not correct. Package name was used instead of kernel module name. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: Fix kmod-drm-amdgpu and kmod-drm-radeon dependenciesLucian Cristian2019-04-161-7/+40
| | | | | | | | | | | | | | | | | | Currently the Geode builds fails on following kernel module missing dependencies: Package kmod-drm-amdgpu is missing dependencies for the following libraries: backlight.ko drm_kms_helper.ko fb.ko ttm.ko So this patch tries to fix the kmod-drm-amdgpu module dependecies. Fixes: 2f239c0 ("x86: video: add amdgpu DRM kernel package") Fixes: 2f6918e ("x86: video: add radeon DRM module support") Tested-by: Tomasz Maciej Nowak <tomek_n@o2.pl> Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* layerscape: unbreak ehci-fsl interaction with mpc85xxChristian Lamparter2019-04-151-22/+9
| | | | | | | | | | Both targets have their own idea of how to use ehci-fsl. This patch reverts part of commit 68b8d3b0796d ("kernel: usb: add FSL EHCI package") and moves ehci-fsl back into kmod-usb2, while also making it hopefully useable for the mpc85xx target. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: usb: add FSL EHCI packageDavid Bauer2019-04-131-2/+21
| | | | | | | Add kernel module package for the Freescale USB2 EHCI used on the mpc85xx platform. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: Add RIPEMD160 moduleRosen Penev2019-04-061-0/+12
| | | | | | | | After getting rid of cryptsetup's heavy openssl dependency, there is now the problem of missing RIPEMD160 support. RIPEMD160 is used for True/Vera crypt volumes as well as old LUKS1 ones. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: can: add Xilinx CAN IP kernel module packageLuis Araneda2019-04-061-1/+13
| | | | | | | This driver is required to use the CAN IP on devices from the zynq target Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* kernel: sound: add missing symbol to sound-soc-coreLuis Araneda2019-04-061-0/+1
| | | | | | | This fixes compilation on zynq target when migrating to sound kmod packages Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* kernel: package rtc-em3027 moduleTomasz Maciej Nowak2019-04-061-0/+18
| | | | | | Support for Microelectronic EM3027 real time clock chip. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* tegra: add new targetTomasz Maciej Nowak2019-04-061-2/+2
| | | | | | | | | | New target introduces initial support for NVIDIA Tegra SoC based devices. It focuses on Tegra 2 CPUs, for successors supporting NEON instruction set the target should be split in two subtargets. This initial commit doesn't create any device image, it's groundwork for further additions. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
* kernel: fix missing dependency in 4.14.108Koen Vandeputte2019-03-271-1/+1
| | | | | | | | | | | | The 4.14.108 bump introduced a missing dependency when building specific netfilters. Thsi was not seen as the error does not occur on all targets. Thanks to Jo-Philipp Wich for providing the fix Fixes: af6c86dbe56e ("kernel: bump 4.14 to 4.14.108") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* linux: Add kmod-sched-act-vlanHauke Mehrtens2019-03-251-0/+16
| | | | | | This allows to configure rules to push or pop vlan headers. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* linux: Add kmod-sched-flowerHauke Mehrtens2019-03-251-0/+16
| | | | | | | This allows to classify packets based on a configurable combination of packet keys and masks. Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
* linux: Add kmod-sched-mqprioHauke Mehrtens2019-03-251-0/+16
| | | | | | This adds Multi-queue priority scheduler (MQPRIO). Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 14:00:49 +0000