aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* kernel: add kmod-fouFilip Moc2018-02-101-0/+22
| | | | | | | | | Once installed fou kernel module allows you to use FOU (Foo over UDP) and GUE (Generic UDP encapsulation) tunnel protocols. To get ip fou command working you also need to install ip-full. Signed-off-by: Filip Moc <lede@moc6.cz>
* mt76: update to the latest version, fixes mt7603 stability issuesFelix Fietkau2018-02-091-3/+3
| | | | | | | | 3413961 mt7603: avoid reordering qos-null data packets c60e6db mt76: toggle driver station powersave bit before notifying mac80211 246d548 mt76: stop tx queues from the driver callback instead of common code Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: remove kmod-spi-gpio-oldFelix Fietkau2018-02-091-16/+0
| | | | | | It is unused and has been deprecated for a long time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wrt55agv2-spidevs: mark as brokenFelix Fietkau2018-02-091-1/+1
| | | | | | | The target it was meant for was updated to a version that this does not compile with. It probably also hasn't been used in years Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ltq-atm: cleanup unused variables and functionsMartin Schiller2018-02-051-41/+0
| | | | Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* ltq-atm: rewrite tx path to use IRQsAlexander Couzens2018-02-052-46/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ATM subsystem is different from the generic ethernet NICs. The ATM subsystem requires a callback when a packet has been sent. It means a tx skb_buff need to be used after it has sent. While the generic NIC can fill up the TX ring and free skb_buffs if it encounter a ring buffer slot with an already sent skbuff. The ATM drivers need call the pop() function after it has send a single ATM package. The ATM subsystem controls via this ways the queuing. The ppe engine use DMA channels for read and write. Every atm_vcc has it's own TX DMA channel and each TX DMA channel has it's own ring buffer. The old driver had multiple issues: - Call the subsystem callback at the beginning of tx function (ppe_send). Didn't allowed the ATM subsystem to control the enqueued package amount. - Filled up the TX ring until full and fail futher - copy or decouple the skb from all other subsystem before giving it over to TX ring The new tx path uses interupts. - call the subsystem callback _after_ it was sent by hardware - no need to copy our decouple the skb any more - gives back control to the atm subsystem over the enqueued packages - use an interupt for every sent atm package Using interupts shouldn't be a problem because of the slow uplink bandwidth of ADSL. The speed _through_ the DSL router was always as high as it should be, only traffic generated on the router itself were affected. After changing to new tx path, the speed of iperf's run on the router itself reached the same speed. The master/trunk wasn't as much affected because of TCP optimisations (reboot-5022-gb2ea46fe236a). The following results are taken on the remote server, which receives the stream over the internet and the DSL line. The sync moves between every sync a litte bit, but is so far stable Latency / Interleave Delay: Down: Fast (0.25 ms) / Up: Fast (0.50 ms) Data Rate: Down: 13.287 Mb/s / Up: 1.151 Mb/s reboot-5521-g9f8d28285d without patch [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.04 sec 947 KBytes 773 Kbits/sec 0 sender [ 5] 0.00-10.04 sec 928 KBytes 757 Kbits/sec receiver reboot-5521-g9f8d28285d with patch [ 5] 0.00-10.06 sec 1.16 MBytes 970 Kbits/sec 0 sender [ 5] 0.00-10.06 sec 1.15 MBytes 959 Kbits/sec receiver v17.01.4-239-g55c23e44f4 without patch [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.04 sec 87.4 KBytes 71.3 Kbits/sec 0 sender [ 5] 0.00-10.04 sec 59.6 KBytes 48.7 Kbits/sec receiver v17.01.4-239-g55c23e44f4 with patch [ ID] Interval Transfer Bandwidth Retr [ 5] 0.00-10.05 sec 1.18 MBytes 983 Kbits/sec 1 sender [ 5] 0.00-10.05 sec 1.15 MBytes 959 Kbits/sec receiver Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* mt76: update to the latest versionFelix Fietkau2018-02-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 2b7fae4 mt76: fix returnvar.cocci warnings 939e3e0 mt76x2: dfs: avoid tasklet scheduling during mt76x2_dfs_init_params() cf59170 mt76x2: dfs: add set_domain handler 5e4d60e mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params() f76e25f mt76x2: fix WMM parameter configuration 34d612d mt76: retry rx polling as long as there is budget left 0f8327a mt76x2: fix TSF value in probe responses ad3f8e9 mt76: add an intermediate struct for rx status information 58a41f1 mt76: get station pointer by wcid and pass it to mac80211 b0508d3 mt76: implement A-MPDU rx reordering in the driver code cf3cfc4 mt76: split mt76_rx_complete 461cdf9 mt76: pass the per-vif wcid to the core for multicast rx 9b2c778 mt76: validate rx CCMP PN 302af90 mt76x2: init: disable all pending tasklets during device removal 9f685fe mt7603: init: disable tbtt tasklet during device removal c6f8cac mt76: let mac80211 validate CCMP PN for fragmented frames 3968dae mt7603: fix 40 mhz channel bandwidth reporting 9c2e03d mt7603: fix rx LDPC reporting f515dfc mt76: implement AP_LINK_PS 974142c mt76: implement processing of BlockAckReq frames c5209db mt76: avoid re-queueing A-MPDU rx reorder work if no frames are pending e67e7a5 mt76x2: do not set status->aggr for NULL data frames 8693864 mt76: check qos ack policy before reordering packets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* leds: correct ledtrig-heartbeat Kconfig descriptionHans Dedecker2018-02-021-1/+1
| | | | | | Fix ledtrig-heartbeat Kconfig description Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netfilter: add missing dependency to kmod-ipt-tproxyMatthias Schiffer2018-01-311-1/+1
| | | | | Fixes: e7e025426a "netfilter: clean up dependencies of kernel modules" Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: replace revert for 11s compatiblity with upstream fixMatthias Schiffer2018-01-312-60/+55
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* netfilter: add packages for arp and bridge tables of nftablesMatthias Schiffer2018-01-311-2/+26
| | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* netfilter: clean up dependencies of kernel modulesMatthias Schiffer2018-01-311-15/+38
| | | | | | | | | The nf_reject_ipv4 and nf_reject_ipv6 modules are moved into separate packages, as they are a common dependency of ip(6)tables and nftables. This avoids a dependency of nftables on kmod-nf-ipt(6). Also, fewer iptables modules depend on nf-conntrack(6) now. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: add test MTD driver packageHans Dedecker2018-01-291-0/+16
| | | | | | Allows to test MTD driver using RAM Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netdevices.mk: add missing dependency to kmod-hwmon-coreHauke Mehrtens2018-01-291-2/+2
| | | | | | | The IGB and IXGBE drivers depend on kmod-hwmon core now. Fixes: af707a178fa5 ("netdevices.mk: add hwmon to IGB and IXGBE drivers") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netdevices.mk: add hwmon to IGB and IXGBE driversPhilip Prindeville2018-01-291-4/+4
| | | | | | | | | | Off-chip NICs can run hotter than the CPU, so they're definitely worth instrumenting. Adding hardware monitoring increases by ~3744 and ~2672 bytes, respectively, the sizes of the igb.ko and ixgbe.ko drivers. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* Revert "netdevices.mk: add hwmon to IGB and IXGBE drivers"John Crispin2018-01-281-4/+4
| | | | | | This reverts commit af707a178fa5f23dcf149da3e545958c0085500a. Signed-off-by: John Crispin <john@phrozen.org>
* Revert "netdevices.mk: add missing dependency to kmod-hwmon-core"John Crispin2018-01-281-2/+2
| | | | | | | | | This reverts commit 53f62bc5e5c36c1a08e162d8b26de7d831fc36e5. commit made the builders fail with "Package kmod-igb is missing dependencies for the following libraries: hwmon.ko" Signed-off-by: John Crispin <john@phrozen.org>
* netdevices.mk: add missing dependency to kmod-hwmon-coreHauke Mehrtens2018-01-281-2/+2
| | | | | | | The IGB and IXGBE drivers depend on kmod-hwmon core now. Fixes: af707a178fa5 ("netdevices.mk: add hwmon to IGB and IXGBE drivers") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netdevices.mk: add hwmon to IGB and IXGBE driversPhilip Prindeville2018-01-271-4/+4
| | | | | | | | | | Off-chip NICs can run hotter than the CPU, so they're definitely worth instrumenting. Adding hardware monitoring increases by ~3744 and ~2672 bytes, respectively, the sizes of the igb.ko and ixgbe.ko drivers. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel/modules/other: disable Nokia BT UARTTim Harvey2018-01-271-0/+1
| | | | | | disable the Nokia BT UART present on Nikia N9, N900 & N950 added in 4.12. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* mac80211: revert "wireless: set correct mandatory rate flags"Matthias Schiffer2018-01-262-1/+61
| | | | | | | | | Revert upstream commit 1bd773c077de "wireless: set correct mandatory rate flags", as it breaks 11s interoperability: nodes can only associate when neither or both have this patch. As this is a regression from released versions, revert to the old code for now. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* iptables: make kmod-ipt-debug part of default ALL buildYousong Zhou2018-01-261-2/+1
| | | | | | | | | The iptables TRACE target is only available in raw table that's why the dependency was moved from iptables-mod-trace into kmod-ipt-debug Fixes FS#1219 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* Revert "mt76: update to the latest version"Felix Fietkau2018-01-251-3/+3
| | | | | | | This reverts commit 99eb128acaf76a69119fd2de8e194f2b2bbb0427. Connectivity issues reported by users, needs rework Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2018-01-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | 2b7fae4 mt76: fix returnvar.cocci warnings 939e3e0 mt76x2: dfs: avoid tasklet scheduling during mt76x2_dfs_init_params() cf59170 mt76x2: dfs: add set_domain handler 5e4d60e mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params() f76e25f mt76x2: fix WMM parameter configuration 34d612d mt76: retry rx polling as long as there is budget left 0f8327a mt76x2: fix TSF value in probe responses ad3f8e9 mt76: add an intermediate struct for rx status information 58a41f1 mt76: get station pointer by wcid and pass it to mac80211 b0508d3 mt76: implement A-MPDU rx reordering in the driver code cf3cfc4 mt76: split mt76_rx_complete 461cdf9 mt76: pass the per-vif wcid to the core for multicast rx 9b2c778 mt76: validate rx CCMP PN 302af90 mt76x2: init: disable all pending tasklets during device removal 9f685fe mt7603: init: disable tbtt tasklet during device removal c6f8cac mt76: let mac80211 validate CCMP PN for fragmented frames 3968dae mt7603: fix 40 mhz channel bandwidth reporting 9c2e03d mt7603: fix rx LDPC reporting Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: mesh: drop frames appearing to be from usFelix Fietkau2018-01-251-0/+25
| | | | | | | Upstream backport to fix issues arising from devices with duplicate MAC addresses Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "kernel: add IEEE-1284 parallel port support"Jo-Philipp Wich2018-01-221-38/+5
| | | | | | | | | This reverts commit 666e9cf2220b11ccd024cad13ad54ca71d40c5b3. The change has not been build-tested on non-x86 targets and leads to stalled kernel builds due to unset configuration symbols there. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: add IEEE-1284 parallel port supportDaniel Gimpelevich2018-01-221-5/+38
| | | | | | | | | | The kmod-lp package included both lp.ko and ppdev.ko, but ECP device drivers may or may not require lp NOT to be loaded, needing only ppdev. Additionally, There were no packages for any parport interface modules, such as uss720 or parport_pc, provided here. It has not been otherwise possible to use PC-style parport hardware for kmod-lp. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* ath9k: discard undersized packetsFelix Fietkau2018-01-171-0/+25
| | | | | | | | Sometimes the hardware will push small packets that trigger a WARN_ON in mac80211. Discard them early to avoid this issue. Reported-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: remove support code for authsaeFelix Fietkau2018-01-171-9/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netfilter: enable CONFIG_NF_CONNTRACK_MARK from kmod-nf-conntrackJo-Philipp Wich2018-01-161-0/+1
| | | | | | | | Unconditionally enable connmark support and tie it to the conntrack core module to allow removing this kernel configuration dependency from the xtables-addons package. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath9k, ath10k(-ct): move spectral scan support under a separate config symbolMatthias Schiffer2018-01-135-6/+295
| | | | | | | | | | | | | Backport patches that separate spectral scan support from general debugfs support of ath9k/ath10k; this allows to remove the dependency on KERNEL_RELAY from these driver packages even with debugfs enabled and avoids the memory footprint of the relay buffers allocated by ath9k/ath10k even when they aren't used at all. The KERNEL_RELAY dependency is moved to a new config symbol that enables spectral scan support in these drivers. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* mac80211: ath10k: search DT for BDF variant infoSven Eckelmann2018-01-131-0/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on QCA4019 using bus, bmi-chip-id and bmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill the vendor requirements and it is necessary to use a different board data file. This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8. Something similar has to be provided for systems without SMBIOS but with device trees. No solution was specified by QCA and therefore a new one has to be found for ath10k. The device tree requires addition strings to define the variant name wifi@a000000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; wifi@a800000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; This would create the boarddata identifiers for the board-2.bin search * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* kmod-sched-cake: bump to latest cake bakeKevin Darbyshire-Bryant2018-01-111-3/+3
| | | | | | | | | | | | | | | | | More important bug fix: 402f05c Use full-rate mtu_time in all tins. Fixes an issue where some cake tins experienced excessive latency since 49776da (dynamically adjust target) Minor bug fixes: 31277c2 Avoid unsigned comparison against zero. Fix compiler warning, no known impact. 8cf5278 ack_filter: fix TCP flag check. A very contrived case may have lead to dropping a SYN packet that should not be dropped. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* lantiq: create ATM/PTM interfaces with dsl as netdev nameMathias Kresin2018-01-102-4/+4
| | | | | | | | | | | | | | | | | | | | | Renaming an atm etherbride using 'ip link' (via hotplug) is racy since the original netdev might disappear before br2684ctl has finished appling it's setting: local2.notice br2684ctl[1667]: Interface "nas0" created sucessfully local2.notice br2684ctl[1667]: Communicating over ATM 0.8.35, encapsulation: LLC kern.info kernel: dsl0: renamed from nas0 kern.err kernel: br2684:br2684_regvcc: tried to attach to non-existent device local2.err br2684ctl[1667]: Could not configure interface:No such device or address By passing the final used netdev name to br2684ctl_wrap another race condition workaround will be enabled again. Change the lantiq ptm driver to create a netdev with the name dsl as well. Albeit the rename via 'ip link' works fine so far, using a different approach for ptm then atm could be confusing. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: kmod-w1 depends on kmod-hwmon-core since Linux 4.14Jo-Philipp Wich2018-01-091-0/+1
| | | | | | | | | Fixes the following dependency error encountered by the buildbots: Package kmod-w1 is missing dependencies for the following libraries: hwmon.ko Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: fix packaging of kmod-gpio-nxp-74hc164Jo-Philipp Wich2018-01-071-3/+3
| | | | | | | | | | | | | | | | The NXP 74HC164 GPIO expander driver uses a different config symbol ("CONFIG_GPIO_74X164") and module name since since at least Kernel version 2.6.37. Update the kmod package definition accordingly by adjusting kconfig and module file names. This unrelated, but correct change has been separated from the WNR2000v5 support commits. Ref: https://github.com/lede-project/source/pull/1256 Suggested-by: Raphael Catolino <raphael.catolino@gmail.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: make uas work during early bootDaniel Albers2018-01-021-1/+1
| | | | | | | | | | | | Add the uas(p) module to the modules loaded early on the boot process. The uas(p) is an modern alternative, which is used by the modern USB3 storage cases, compared to the bot protocol. To be able to use uas(p) storage cases for extroot, the kernel module has to be loaded before the search for extroot has been called. This patch changes the load order to support uas(p) storage cases for extroot. Signed-off-by: Daniel Albers <daniel.albers@public-files.de>
* mwlwifi: update to version 10.3.4.0 / 2017-12-14Kabuli Chana2017-12-311-3/+3
| | | | | | Lastest stamped version Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* kmod-sched-cake: bump to latest bakeKevin Darbyshire-Bryant2017-12-301-3/+3
| | | | | | | | | Fix overhead accounting error introduced by f33c4d6 refactor cake_advance_shaper and ack_filter Symptoms were links running under rate. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel: add i2c-smbus module packagePhilip Prindeville2017-12-261-3/+18
| | | | | | | Intel motherboards (as well as the Cavium ThunderX SoC) use a superset of the I2C protocol called SMBus. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: kmod-crypto-hw-talitos: fix dependenciesHauke Mehrtens2017-12-201-1/+1
| | | | | | | | | | | With the updated to kernel 4.9.70 in commit f704b643b9cab ("kernel: Update kernel 4.9 to 4.9.70"), the talitos.ko kernel module got a new dependency to kmod-crypto-des in this upstream commit: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=552f74cbd6ec806ab5ce45336a26cae1e015dbe2 This fixes a build problem found by built bot. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest version, reverts MAC address changes causing ↵Felix Fietkau2017-12-171-3/+3
| | | | | | | | | | | | | | | | | | | performance regressions cf4a5ce mt76: fix memcpy to potential null pointer on failed allocation ca5ca8c mt76x2: fix possible NULL pointer dereferencing in mt76x2_ampdu_action() 2d4b8f5 mt76x2: mac: fix possible NULL pointer dereferencing in mt76x2_mac_write_txwi() 4ca8bba mt76x2: eeprom: fix typo in mt76x2_get_power_info_5g() 00f7e60 mt7603: fix configuration for HT40 31e9bdb mt7603: main: fix possible NULL pointer dereferencing in mt7603_ampdu_action() bf90dd2 mt7603: mcu: fix potential NULL pointer dereferencing on failed allocation 860b185 Revert "mt76x2: init: disable APCLI by default" bcd576e Revert "mt76x2: drop wiphy->addresses" bdc6f2f Revert "mt76x2: clean up MAC/BSSID address initialization" d242650 Revert "mt76x2: remove MAC address limitation for multi-vif setups" 68b0cf1 mt76x2: add functions for setting extended MAC address registers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: add missing dependencies to kmod-crypto-acompressHauke Mehrtens2017-12-161-0/+2
| | | | | | | kmod-lib-lzo and kmod-lib-lz4 depend in kernel 4.14 on kmod-crypto-acompress, add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-rtc-ds1307: add dependency to regmapHauke Mehrtens2017-12-161-1/+1
| | | | | | | In kernel 4.14 kmod-rtc-ds1307 depends on regmap-i2c, add this missing dependency. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-iio-bmp280: allow compile with kernel 4.14Hauke Mehrtens2017-12-161-1/+1
| | | | | | This package also compiles with kernel 4.14. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-zram: deactivate CONFIG_ZRAM_WRITEBACK for kernel 4.14Hauke Mehrtens2017-12-161-0/+1
| | | | | | | This new option was introduced in kernel 4.14 and should be deactivated by default. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-fbcon: deactivate for kernel 4.14Hauke Mehrtens2017-12-161-1/+1
| | | | | | | | CONFIG_FRAMEBUFFER_CONSOLE does not activate new modules any more in kernel 4.14, but CONFIG_FRAMEBUFFER_CONSOLE is now a boolean option which change the kmod-fb package. kmod-fbcon should be split up. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-sound-core: handle moved snd-seq-device.koHauke Mehrtens2017-12-161-1/+2
| | | | | | The snd-seq-device.ko kernel module was moved with kernel 4.13. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-mmc: handle moved mmc_block.koHauke Mehrtens2017-12-161-1/+2
| | | | | | mmc_block.ko was moved with kernel 4.10. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: kmod-rxrpc: handle renamed kernel moduleHauke Mehrtens2017-12-161-2/+3
| | | | | | | The kernel module was renamed with kernel 4.11, handle that in the package definition. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 13:53:16 +0000